I am not using xvmc.

I am grasping at this point and tonight I am going to move the cards around in my box so that the Winfast 2000 is in PCI slot 0.

Maybe the Winfast card has to be \dev\video0. I don't know I am pretty frustrated at this point and I am ready to give up. Maybe buying another tuner that supports btaudio will solve my problem.

Xsecrets, when you installed did you install the Winfast 2000 first and then upgrade your system with the pvr-250, or did you start with the pvr-250?

Another problem that I have experienced is that when I installed the KnoppMyth software with both tuners in the box the pvr-remote would not function. I needed to remove the winfast2000 and re-install before I was able to add the Winfast 2000 back into the system.

Mike G.

well on my motherboard at least it does not matter what I do the leadtek gets video0 which I don't mind I just setup the pvr first in the database and all is good.

I started a long time ago with just the leadtek, but I've reinstalled several times with both cards in there and had no problems with remote or anything else.

I put the WinFast2000 in pci slot 0 and the pvr-250 in pci slot 1 and all works fine now.



Thanks for all the help.
Mike G.