View unanswered posts    View active topics

Board index KnoppMyth Installation

All times are UTC - 6 hours





Post new topic Reply to topic  Page 1 of 1
  [ 5 posts ] 
Print view Previous topic   Next topic  
Author Message
Search for:
jac1d
PostPosted: Wed Apr 07, 2004 8:09 am 
Offline
Joined: Fri Mar 26, 2004 9:00 am
Posts: 239
*sigh* KnoppMyth was almost perfect on the install but I can't get my GeForce2 to play nicely. THe driver installed but I can't get in to X.
I've tried playing with bits from my original config and bits from the suggestion TV out config that comes with KnoppMyth, as well as each individually and no avail.

My NVidia screen comes up for a few seconds, flashes balck and then comes up again, then after a while the system decides X won't start and kicks me back. Anyone have a GF2MX working? I know it works, it worked with my old hand built system :S.

-Jeff
Top
 Profile  
 
jac1d
PostPosted: Wed Apr 07, 2004 8:26 am 
Offline
Joined: Fri Mar 26, 2004 9:00 am
Posts: 239
I think I'm going to spend the $70 and get a GF4MX, as that seems tobe the current standard... I always did want overscan anyway...

Does the suggested NVidia config file work out of the box with the GF4MX?

-Jeff
Top
 Profile  
 
jac1d
 Post subject: Got it working
PostPosted: Wed Apr 07, 2004 10:37 am 
Offline
Joined: Fri Mar 26, 2004 9:00 am
Posts: 239
I managed to get it working... Here is my current config for anyone else who wants to try it with a GF2 MX:

Quote:
# XFree86 4 configuration created by redhat-config-xfree86
#Section "Device"
# Identifier "Videocard0"
# Driver "nvidia"
# VendorName "Videocard vendor"
# BoardName "NVIDIA GeForce 2 MX (generic)"
# VideoRam 65536
# Option "RenderAccel" "1"
#EndSection
#Section "DRI"
# Group 0
# Mode 0666
#EndSection

Section "ServerLayout"
Identifier "Default Layout"
Screen 0 "Screen0" 0 0
InputDevice "DevInputMice" "CorePointer"
InputDevice "Keyboard0" "CoreKeyboard"
EndSection

Section "Files"
RgbPath "/usr/X11R6/lib/X11/rgb"
ModulePath "/usr/X11R6/lib/modules"
FontPath "/usr/X11R6/lib/X11/fonts/misc:unscaled"
FontPath "/usr/X11R6/lib/X11/fonts/misc"
FontPath "/usr/X11R6/lib/X11/fonts/75dpi:unscaled"
FontPath "/usr/X11R6/lib/X11/fonts/75dpi"
FontPath "/usr/X11R6/lib/X11/fonts/100dpi:unscaled"
FontPath "/usr/X11R6/lib/X11/fonts/100dpi"
FontPath "/usr/X11R6/lib/X11/fonts/Speedo"
FontPath "/usr/X11R6/lib/X11/fonts/PEX"
# Additional fonts: Locale, Gimp, TTF...
FontPath "/usr/X11R6/lib/X11/fonts/cyrillic"
# FontPath "/usr/X11R6/lib/X11/fonts/latin2/75dpi"
# FontPath "/usr/X11R6/lib/X11/fonts/latin2/100dpi"
# True type and type1 fonts are also handled via xftlib, see /etc/X11/XftConfig!
FontPath "/usr/X11R6/lib/X11/fonts/Type1"
FontPath "/usr/share/fonts/ttf/western"
FontPath "/usr/share/fonts/ttf/decoratives"
FontPath "/usr/share/fonts/truetype"
FontPath "/usr/share/fonts/truetype/openoffice"
FontPath "/usr/share/fonts/truetype/ttf-bitstream-vera"
FontPath "/usr/share/fonts/latex-ttf-fonts"
FontPath "/usr/X11R6/lib/X11/fonts/defoma/CID"
FontPath "/usr/X11R6/lib/X11/fonts/defoma/TrueType"
# RgbPath is the location of the RGB database. Note, this is the name of the
# file minus the extension (like ".txt" or ".db"). There is normally
# no need to change the default.
# Multiple FontPath entries are allowed (they are concatenated together)
# By default, Red Hat 6.0 and later now use a font server independent of
# the X server to render fonts.
# RgbPath "/usr/X11R6/lib/X11/rgb"
# FontPath "unix/:7100"
EndSection

Section "Module"
Load "dbe"
Load "extmod"
Load "fbdevhw"
Load "glx"
Load "record"
Load "freetype"
Load "type1"
# Load "dri"
EndSection

Section "InputDevice"

# Specify which keyboard LEDs can be user-controlled (eg, with xset(1))
# Option "Xleds" "1 2 3"
# To disable the XKEYBOARD extension, uncomment XkbDisable.
# Option "XkbDisable"
# To customise the XKB settings to suit your keyboard, modify the
# lines below (which are the defaults). For example, for a non-U.S.
# keyboard, you will probably want to use:
# Option "XkbModel" "pc102"
# If you have a US Microsoft Natural keyboard, you can use:
# Option "XkbModel" "microsoft"
#
# Then to change the language, change the Layout setting.
# For example, a german layout can be obtained with:
# Option "XkbLayout" "de"
# or:
# Option "XkbLayout" "de"
# Option "XkbVariant" "nodeadkeys"
#
# If you'd like to switch the positions of your capslock and
# control keys, use:
# Option "XkbOptions" "ctrl:swapcaps"
# Or if you just want both to be control, use:
# Option "XkbOptions" "ctrl:nocaps"
#
Identifier "Keyboard0"
Driver "keyboard"
Option "XkbRules" "xfree86"
Option "XkbModel" "pc105"
Option "XkbLayout" "us"
EndSection

Section "InputDevice"
Identifier "Mouse0"
Driver "mouse"
Option "Protocol" "PS/2"
Option "Device" "/dev/psaux"
Option "ZAxisMapping" "4 5"
Option "Emulate3Buttons" "yes"
EndSection

Section "InputDevice"

# If the normal CorePointer mouse is not a USB mouse then
# this input device can be used in AlwaysCore mode to let you
# also use USB mice at the same time.
Identifier "DevInputMice"
Driver "mouse"
Option "Protocol" "IMPS/2"
Option "Device" "/dev/input/mice"
Option "ZAxisMapping" "4 5"
Option "Emulate3Buttons" "no"
EndSection

Section "Monitor"

# Option "dpms"
# HorizSync 30.0 - 70.0
# VertRefresh 50.0 - 160.0
Identifier "Monitor0"
VendorName "Monitor Vendor"
ModelName "Avitron"
DisplaySize 280 210
HorizSync 30.0 - 50.0
VertRefresh 50.0 - 60.0
EndSection

Section "Device"

# update this with the PCI id of your card. Consult the output
# of the 'lspci' command.
Identifier "VideoCard0"
Driver "nvidia"
VendorName "nvidia"
BoardName "NVIDIA GeForce 2 MX (MSI)"
VideoRam 65536
Option "RenderAccel" "1"
# TV Out Related Stuff
Option "TwinView"
Option "SecondMonitorHorizSync" "30-50"
Option "SecondMonitorVertRefresh" "60"
Option "MetaModes" "800x600, 800x600; 640x480, 640x480;"
# Option "MetaModes" "640x480, 640x480;"
Option "TVStandard" "NTSC-M"
BusID "PCI:1:0:0"
EndSection

Section "Screen"
Identifier "Screen0"
Device "Videocard0"
Monitor "Monitor0"
DefaultDepth 24
SubSection "Display"
Depth 24
Modes "1024x768" "800x600" "640x480"
EndSubSection
EndSection


I am using a USB mouse and PS/2 keyboard.
Top
 Profile  
 
cesman
 Post subject:
PostPosted: Wed Apr 07, 2004 12:02 pm 
Offline
Joined: Fri Sep 19, 2003 7:05 pm
Posts: 5088
Location: Fontana, Ca
Perhaps checking X's log in /var/log...

_________________
cesman

When the source is open, the possibilities are endless!
Top
 Profile  
 
Gnarl
PostPosted: Thu Apr 08, 2004 8:43 am 
Offline
Joined: Mon Feb 16, 2004 7:06 pm
Posts: 309
Location: Toronto
This is my config for GF2MX, some of the metamodes don't work cuz i haven't troubleshooted to find out which one do work. i just ctrl-alt + to move throught different modes

Section "ServerLayout"
Identifier "XFree86 Configured"
Screen 0 "Screen0" 0 0
InputDevice "Keyboard0" "CoreKeyboard"
InputDevice "PS/2 Mouse" "CorePointer"
# Serial Mouse not detected
# USB Mouse not detected
EndSection

Section "ServerFlags"
Option "AllowMouseOpenFail" "true"

EndSection

Section "Files"
RgbPath "/usr/X11R6/lib/X11/rgb"
ModulePath "/usr/X11R6/lib/modules"
FontPath "/usr/X11R6/lib/X11/fonts/misc:unscaled"
FontPath "/usr/X11R6/lib/X11/fonts/misc"
FontPath "/usr/X11R6/lib/X11/fonts/75dpi:unscaled"
FontPath "/usr/X11R6/lib/X11/fonts/75dpi"
FontPath "/usr/X11R6/lib/X11/fonts/100dpi:unscaled"
FontPath "/usr/X11R6/lib/X11/fonts/100dpi"
FontPath "/usr/X11R6/lib/X11/fonts/Speedo"
FontPath "/usr/X11R6/lib/X11/fonts/PEX"
# Additional fonts: Locale, Gimp, TTF...
FontPath "/usr/X11R6/lib/X11/fonts/cyrillic"
# FontPath "/usr/X11R6/lib/X11/fonts/latin2/75dpi"
# FontPath "/usr/X11R6/lib/X11/fonts/latin2/100dpi"
# True type and type1 fonts are also handled via xftlib, see /etc/X11/XftConfig!
FontPath "/usr/X11R6/lib/X11/fonts/Type1"
FontPath "/usr/share/fonts/ttf/western"
FontPath "/usr/share/fonts/ttf/decoratives"
FontPath "/usr/share/fonts/truetype"
FontPath "/usr/share/fonts/truetype/openoffice"
FontPath "/usr/share/fonts/truetype/ttf-bitstream-vera"
FontPath "/usr/share/fonts/latex-ttf-fonts"
FontPath "/usr/X11R6/lib/X11/fonts/defoma/CID"
FontPath "/usr/X11R6/lib/X11/fonts/defoma/TrueType"
EndSection

Section "Module"
Load "ddc" # ddc probing of monitor
Load "GLcore"
Load "dbe"
Load "dri"
Load "extmod"
Load "glx"
Load "bitmap" # bitmap-fonts
Load "speedo"
Load "type1"
Load "freetype"
Load "record"
EndSection

Section "InputDevice"
Identifier "Keyboard0"
Driver "keyboard"
Option "CoreKeyboard"
Option "XkbRules" "xfree86"
Option "XkbModel" "pc105"
Option "XkbLayout" "us"

EndSection

Section "InputDevice"
Identifier "Serial Mouse"
Driver "mouse"
Option "Protocol" "Microsoft"
Option "Device" "/dev/ttyS0"
Option "Emulate3Buttons" "true"
Option "Emulate3Timeout" "70"
Option "SendCoreEvents" "true"
EndSection

Section "InputDevice"
Identifier "PS/2 Mouse"
Driver "mouse"
Option "Protocol" "auto"
Option "ZAxisMapping" "4 5"
Option "Device" "/dev/psaux"
Option "Emulate3Buttons" "true"
Option "Emulate3Timeout" "70"
Option "SendCoreEvents" "true"
EndSection

Section "InputDevice"
Identifier "USB Mouse"
Driver "mouse"
Option "Device" "/dev/input/mice"
Option "SendCoreEvents" "true"
Option "Protocol" "IMPS/2"
Option "ZAxisMapping" "4 5"
Option "Buttons" "5"
EndSection

# Auto-generated by KNOPPIX mkxf86config

Section "Monitor"
Identifier "Monitor0"
Option "DPMS" "true"
# HorizSync 28.0 - 78.0 # Warning: This may fry very old Monitors
HorizSync 28.0 - 96.0 # Warning: This may fry old Monitors
VertRefresh 50.0 - 76.0 # Very conservative. May flicker.
# These are some Modelines that happen to work on many systems
# Especially the "1024x768" has been thoroughly tested, even on Laptops
Modeline "640x480" 25.175 640 664 760 800 480 491 493 525 #60Hz
Modeline "800x600" 40.12 800 848 968 1056 600 601 605 628 #60Hz
Modeline "1024x768" 85 1024 1056 1152 1360 768 784 787 823
Modeline "1152x864" 92 1152 1208 1368 1474 864 865 875 895
Modeline "1152x864" 110 1152 1240 1324 1552 864 864 876 908
Modeline "1152x864" 135 1152 1464 1592 1776 864 864 876 908
Modeline "1152x864" 137.65 1152 1184 1312 1536 864 866 885 902 -HSync -VSync
Modeline "1280x1024" 80 1280 1296 1512 1568 1024 1025 1037 1165 Interlace
Modeline "1280x1024" 110 1280 1328 1512 1712 1024 1025 1028 1054
Modeline "1280x1024" 126.5 1280 1312 1472 1696 1024 1032 1040 1068 -HSync -VSync
Modeline "1280x1024" 135 1280 1312 1456 1712 1024 1027 1030 1064
Modeline "1280x1024" 135 1280 1312 1416 1664 1024 1027 1030 1064
Modeline "1280x1024" 157.5 1280 1344 1504 1728 1024 1025 1028 1072 +HSync +VSync
Modeline "1280x1024" 181.75 1280 1312 1440 1696 1024 1031 1046 1072 -HSync -VSync
Modeline "1600x1200" 162 1600 1664 1856 2160 1200 1201 1204 1250 +HSync +VSync
Modeline "1600x1200" 189 1600 1664 1856 2160 1200 1201 1204 1250 -HSync -VSync
Modeline "1600x1200" 202.5 1600 1664 1856 2160 1200 1201 1204 1250 +HSync +VSync
Modeline "1600x1200" 220 1600 1616 1808 2080 1200 1204 1207 1244 +HSync +VSync
ModeLine "1800x1440" 230 1800 1896 2088 2392 1440 1441 1444 1490 +HSync +VSync
ModeLine "1800x1440" 250 1800 1896 2088 2392 1440 1441 1444 1490 +HSync +VSync
EndSection

Section "Device"
### Available Driver options are:-
# sw_cursor is needed for some ati and radeon cards
Option "sw_cursor"
#Option "hw_cursor"
#Option "NoAccel"
#Option "ShowCache"
#Option "ShadowFB"
#Option "UseFBDev"
#Option "Rotate"
Identifier "Card0"
# The following line is auto-generated by KNOPPIX mkxf86config
Driver "nvidia"
VendorName "All"
BoardName "All"
Option "TwinView"
Option "TwinViewOrientation" "Clone"
Option "SecondMonitorHorizSync" "30-50"
Option "SecondMonitorVertRefresh" "60"
Option "MetaModes" "640x480;800x600, 800x600;800x600,800x600;640x480"
#Option "MetaModes" "800x600, 800x600"
#Option "MetaModes" "1024x768, 1024x768; 800x600, 800x600; 640x480, 640x480;"
Option "TVStandard" "NTSC-M"
Option "ConnectedMonitor" "crt,tv"

# BusID "PCI:1:0:0"
EndSection

Section "Screen"
Identifier "Screen0"
Device "Card0"
Monitor "Monitor0"
DefaultColorDepth 16
SubSection "Display"
Depth 1
Modes "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 4
Modes "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 8
Modes "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 15
Modes "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 16
Modes "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 24
Modes "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 32
Modes "800x600" "640x480"
EndSubSection
EndSection

Section "DRI"
Mode 0666
EndSection
Top
 Profile  
 

Display posts from previous:  Sort by  
Post new topic Reply to topic  Page 1 of 1
  [ 5 posts ] 


Board index KnoppMyth Installation

All times are UTC - 6 hours




Who is online

Users browsing this forum: No registered users and 3 guests

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Jump to:  
cron
Powered by phpBB® Forum Software © phpBB Group

Theme Created By ceyhansuyu