LinHES Forums http://forums.linhes.org/ |
|
Upgrade from R5B7 to R5D1 syntax error operand expand http://forums.linhes.org/viewtopic.php?f=1&t=11780 |
Page 1 of 1 |
Author: | cullenp [ Sat Sep 23, 2006 3:26 pm ] |
Post subject: | Upgrade from R5B7 to R5D1 syntax error operand expand |
I tried the auto upgrade from R5B7 to R5D1 following this post: http://mysettopbox.tv/phpBB2/viewtopic. ... ace119f739 and this wiki: http://www.knoppmythwiki.org/index.php? ... storeHowTo The backups were confirmed with check_backup.sh I run into trouble when I get to the auto installer. It exits with this error: /usr/local/bin/KnoppMyth-upg line 1039 /1024 syntax error: operand expanded (error token is "/1024") I have KnoppMyth installed on SATA drives with 1 GB RAM Motherboard - Foxconn 6150K8MA-8EKRS Micro ATX AMD Processor - AMD 3200 Venice Socket 939 Any ideas? Thanks |
Author: | tjc [ Sat Sep 23, 2006 4:15 pm ] |
Post subject: | |
You can't use auto upgrade with a SATA drive. I'm pretty sure that Cecil's Pamphlet says something about this. See the section on Manual Upgrade. |
Author: | syphr42 [ Sat Sep 23, 2006 5:37 pm ] |
Post subject: | |
I ran into the same error when trying to upgrade on an IDE drive. I tried a fresh install as well and it kept failing with similar errors during the install, so I went back to C7 and it installed perfectly. I burned three separate disks and all passed a checksum test with "testcd" and I compared MD5 sums on the ISO I downloaded as well. I'm not sure what happened, but I decided to just wait until the next ISO is released with MythTV v0.20. |
Page 1 of 1 | All times are UTC - 6 hours |
Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |