LinHES Forums
http://forums.linhes.org/

R4V3 issue - stuck at "Setting paths...."
http://forums.linhes.org/viewtopic.php?f=1&t=1326
Page 1 of 1

Author:  khrusher [ Wed Apr 28, 2004 6:26 am ]
Post subject:  R4V3 issue - stuck at "Setting paths...."

Well, I downloaded the V3 iso last night in and attempt to get past an APIC issue. (of course this required me to move some CD-RW drives around between PCs)

- Well, I put the R4V3 disk in and power up.
- I get the grey KnoppMyth boot screen and hit enter.
- Boot process starts text starts flowing onto a black terminal
- The PC hangs (very quickly into the process) .

The last things on the screen are

Code:
<penguin image>
Ide: late registration of driver
Welcome to Knoppmyth Linux CD!
Accessing KnoppMyth CDROM at /dev/scd0
Setting paths.....


At this point I have flashing lights on my keyboard and the only thing I can do is power down.

I have confirmed that the BIOS sees the disks.

I have also confirmed that I can still boot form my R4V2 iso disk.

EDIT:
EDIT: I have verifided the MD5 checksum as valid....however when retrying, I noticed an initial message...I have added the first lines to the
code listing above. what is the 'Ide' message?

Well, while the MD5 was valid, the writing of the ISO to the disk was bad...infact, after 2 more write attempts....I found that I needed to slow down the CD-W to create a valid CD.

i have installed R4V3. I have everything working but sound

Author:  khrusher [ Wed Apr 28, 2004 6:15 pm ]
Post subject: 

I have added to the initial message....I noticed an error ...

"ide: late registration of driver"

suggestions

Author:  cesman [ Wed Apr 28, 2004 6:30 pm ]
Post subject: 

You can ignore this...

Author:  khrusher [ Wed Apr 28, 2004 7:12 pm ]
Post subject: 

ok, but im still stuck at the original 'setting paths' issue....

once that is displayed, PC locks up and keyboard light flashes.

Author:  khrusher [ Thu Apr 29, 2004 7:05 pm ]
Post subject: 

Well, Ive tried moving my PCI boards around with no success.

So I tried booting with a 'noquiet' option...Im not sure if that makes any sense but it did produce some more output.

towards the end, this is what I see....

Code:
Partition Check
   hda: hda1 hda2 hda3 hda4

---- snip some networking/tcp stuff

hda7: bad access block=2 count=2
end_request: I/O error dev 03:07 (hda) sector 2
EXT2-fs: unable to read superblock

kernal panic: VFS: unable to mount root fs on 03:07



seems odd to me to be accessing hda7

Author:  khrusher [ Fri Apr 30, 2004 5:59 pm ]
Post subject: 

well, with no help here and no more options to try on my own, guess Im outta luck. Ill check back but I may be moving on to Debian and manual MythTV install

Author:  Xsecrets [ Fri Apr 30, 2004 7:31 pm ]
Post subject: 

well sorry would help, but I've never experienced the problem you are having and I don't see anything in the info you've given that gives me a clue.

Author:  khrusher [ Sat May 01, 2004 5:54 am ]
Post subject: 

well, the system just doesnt get very far into the boot.

since I boot fine w/ v2...I have to assume its something with v3, no?

Author:  khrusher [ Thu May 06, 2004 11:11 am ]
Post subject: 

can anyone tell me what exactly it executing when the 'Setting Paths....' message is displayed. I assume its attempting to buiild hardware paths to the various components in the box.

is there any way to boot V3 (maybe some kinda 'expert' mode) so I can manually execute what the script is trying?

Anyone else having similar issues, since my last post I have been able to install debian and reinstall knoppmyth (again).

thanx.

Author:  cesman [ Thu May 06, 2004 2:42 pm ]
Post subject: 

It is making the directories /cache and /myth and the subdirectories below then. Boot from the CD, chroot and rm -fr /home/mythtv/.configure. You can take a look at the mkmythdir script to see what directories are created.

Author:  SirAvalon [ Mon Oct 11, 2004 1:07 pm ]
Post subject: 

I know that this post is very old, but I’ve had the same problem with R4V5. The problem was solved when I’ve reburned the ISO.

Page 1 of 1 All times are UTC - 6 hours
Powered by phpBB® Forum Software © phpBB Group
http://www.phpbb.com/