LinHES Forums http://forums.linhes.org/ |
|
Records one show then stops. http://forums.linhes.org/viewtopic.php?f=1&t=1462 |
Page 1 of 1 |
Author: | cerlendson [ Sun May 16, 2004 12:30 am ] |
Post subject: | Records one show then stops. |
I've installed KnoppMyth (V4R3) and I thought I had it working with my PVR-350, but I have this weird problem where I set it up to record multiple shows, and it will record the first show, but it doesn't record the other ones. If I try to watch TV after all of the shows should be done recording it says that the tunner is busy, and if I try to use the guide it says that there is no backend. Here are the logs, I'm not sure what I'm looking for, but the look fine. mythbackend.log QSettings: error creating /.qt QSettings::sync: filename is null/empty QSettings: error creating /.qt QSettings::sync: filename is null/empty QSettings: error creating /.qt QSettings::sync: filename is null/empty QSettings: error creating /.qt QSettings::sync: filename is null/empty QSettings: error creating /.qt QSettings::sync: filename is null/empty QSettings: error creating /.qt QSettings::sync: filename is null/empty Starting up as the master server. QSettings: error creating /.qt QSettings::sync: filename is null/empty 2004-05-15 19:52:45 mythbackend version: 0.14.20040123-1 www.mythtv.org 2004-05-15 19:52:45 Enabled verbose msgs : important general 2004-05-15 19:52:48 Found changes in the todo list. 2004-05-15 20:05:23 MainServer::HandleAnnounce Playback 2004-05-15 20:05:23 adding: mythtv as a client (events: 0) 2004-05-15 20:05:23 MainServer::HandleAnnounce Playback 2004-05-15 20:05:23 adding: mythtv as a client (events: 1) 2004-05-15 20:06:29 Found changes in the todo list. 2004-05-15 20:06:29 Started recording "Horsepower TV" on channel: 3032 on cardid: 2, sourceid 3 2004-05-15 20:06:29 Changing from None to RecordingOnly 2004-05-15 20:06:37 Found changes in the todo list. 2004-05-15 20:06:45 Found changes in the todo list. 2004-05-15 20:30:00 Changing from RecordingOnly to None 2004-05-15 20:30:00 Found changes in the todo list. messages May 15 19:52:41 mythtv kernel: ivtv: Encoder revision: 0x02040011 May 15 19:52:41 mythtv kernel: ivtv: Decoder revision: 0x02020023 May 15 19:52:41 mythtv kernel: ivtv: Registered v4l2 device, minor 0 May 15 19:52:41 mythtv kernel: ivtv: Registered v4l2 device, minor 32 May 15 19:52:41 mythtv kernel: ivtv: Registered v4l2 device, minor 224 May 15 19:52:41 mythtv kernel: ivtv: Registered v4l2 device, minor 16 May 15 19:52:41 mythtv kernel: ivtv: loaded May 15 19:52:41 mythtv kernel: lirc_dev: IR Remote Control driver registered, at major 61 May 15 19:52:42 mythtv kernel: bttv: driver version 0.9.12 loaded May 15 19:52:42 mythtv kernel: bttv: using 8 buffers with 2080k (520 pages) each for capture May 15 19:52:42 mythtv kernel: lirc_i2c: chip found @ 0x18 (Hauppauge IR) May 15 19:52:42 mythtv kernel: lirc_dev: lirc_register_plugin:sample_rate: 10 May 15 19:52:42 mythtv kernel: saa7115[0]: decoder set size May 15 19:52:42 mythtv kernel: Setting full NTSC width May 15 19:52:42 mythtv kernel: Setting full NTSC height May 15 19:52:46 mythtv kernel: apm: BIOS version 1.2 Flags 0x0b (Driver version 1.16) May 15 20:06:29 mythtv kernel: saa7115[0]: decoder set size May 15 20:06:29 mythtv kernel: Hpsc: 0x00001, Hfsc: 0x00600 May 15 20:06:29 mythtv kernel: Setting full NTSC height May 15 20:06:33 mythtv kernel: spurious 8259A interrupt: IRQ7. May 15 20:32:32 mythtv -- MARK -- May 15 20:52:32 mythtv -- MARK -- May 15 21:12:32 mythtv -- MARK -- May 15 21:32:32 mythtv -- MARK -- May 15 21:52:32 mythtv -- MARK -- May 15 22:12:32 mythtv -- MARK -- May 15 22:32:32 mythtv -- MARK -- May 15 22:52:32 mythtv -- MARK -- May 15 23:12:32 mythtv -- MARK -- May 15 23:32:32 mythtv -- MARK -- May 15 23:52:32 mythtv -- MARK -- syslog May 15 20:06:29 mythtv kernel: saa7115[0]: decoder set size May 15 20:06:29 mythtv kernel: Hpsc: 0x00001, Hfsc: 0x00600 May 15 20:06:29 mythtv kernel: Setting full NTSC height May 15 20:06:30 mythtv kernel: saa7115[0]: decoder disable output May 15 20:06:30 mythtv kernel: saa7115[0]: decoder enable output May 15 20:06:33 mythtv kernel: spurious 8259A interrupt: IRQ7. May 15 20:10:01 mythtv /USR/SBIN/CRON[912]: (root) CMD ([ -d /etc/shaper ] && /etc/init.d/shaper timecheck) May 15 20:20:01 mythtv /USR/SBIN/CRON[920]: (root) CMD ([ -d /etc/shaper ] && /etc/init.d/shaper timecheck) May 15 20:30:01 mythtv /USR/SBIN/CRON[928]: (root) CMD ([ -d /etc/shaper ] && /etc/init.d/shaper timecheck) May 15 20:35:01 mythtv /USR/SBIN/CRON[936]: (root) CMD (nice -n 19 /usr/local/bin/mythlink.sh) May 15 20:40:01 mythtv /USR/SBIN/CRON[942]: (root) CMD ([ -d /etc/shaper ] && /etc/init.d/shaper timecheck) May 15 20:50:01 mythtv /USR/SBIN/CRON[950]: (root) CMD ([ -d /etc/shaper ] && /etc/init.d/shaper timecheck) May 15 21:00:01 mythtv /USR/SBIN/CRON[958]: (root) CMD ([ -d /etc/shaper ] && /etc/init.d/shaper timecheck) May 15 21:05:01 mythtv /USR/SBIN/CRON[966]: (root) CMD (nice -n 19 /usr/local/bin/mythlink.sh) May 15 21:10:01 mythtv /USR/SBIN/CRON[972]: (root) CMD ([ -d /etc/shaper ] && /etc/init.d/shaper timecheck) May 15 21:20:01 mythtv /USR/SBIN/CRON[980]: (root) CMD ([ -d /etc/shaper ] && /etc/init.d/shaper timecheck) May 15 21:30:01 mythtv /USR/SBIN/CRON[988]: (root) CMD ([ -d /etc/shaper ] && /etc/init.d/shaper timecheck) May 15 21:35:01 mythtv /USR/SBIN/CRON[996]: (root) CMD (nice -n 19 /usr/local/bin/mythlink.sh) May 15 21:40:01 mythtv /USR/SBIN/CRON[1002]: (root) CMD ([ -d /etc/shaper ] && /etc/init.d/shaper timecheck) May 15 21:50:01 mythtv /USR/SBIN/CRON[1010]: (root) CMD ([ -d /etc/shaper ] && /etc/init.d/shaper timecheck) May 15 22:00:01 mythtv /USR/SBIN/CRON[1018]: (root) CMD ([ -d /etc/shaper ] && /etc/init.d/shaper timecheck) May 15 22:05:01 mythtv /USR/SBIN/CRON[1026]: (root) CMD (nice -n 19 /usr/local/bin/mythlink.sh) May 15 22:10:01 mythtv /USR/SBIN/CRON[1032]: (root) CMD ([ -d /etc/shaper ] && /etc/init.d/shaper timecheck) May 15 22:20:01 mythtv /USR/SBIN/CRON[1040]: (root) CMD ([ -d /etc/shaper ] && /etc/init.d/shaper timecheck) May 15 22:30:01 mythtv /USR/SBIN/CRON[1048]: (root) CMD ([ -d /etc/shaper ] && /etc/init.d/shaper timecheck) May 15 22:35:01 mythtv /USR/SBIN/CRON[1056]: (root) CMD (nice -n 19 /usr/local/bin/mythlink.sh) May 15 22:40:01 mythtv /USR/SBIN/CRON[1062]: (root) CMD ([ -d /etc/shaper ] && /etc/init.d/shaper timecheck) May 15 22:50:01 mythtv /USR/SBIN/CRON[1070]: (root) CMD ([ -d /etc/shaper ] && /etc/init.d/shaper timecheck) May 15 23:00:01 mythtv /USR/SBIN/CRON[1078]: (root) CMD ([ -d /etc/shaper ] && /etc/init.d/shaper timecheck) May 15 23:05:01 mythtv /USR/SBIN/CRON[1086]: (root) CMD (nice -n 19 /usr/local/bin/mythlink.sh) May 15 23:10:01 mythtv /USR/SBIN/CRON[1092]: (root) CMD ([ -d /etc/shaper ] && /etc/init.d/shaper timecheck) May 15 23:20:01 mythtv /USR/SBIN/CRON[1100]: (root) CMD ([ -d /etc/shaper ] && /etc/init.d/shaper timecheck) May 15 23:30:01 mythtv /USR/SBIN/CRON[1108]: (root) CMD ([ -d /etc/shaper ] && /etc/init.d/shaper timecheck) May 15 23:35:01 mythtv /USR/SBIN/CRON[1116]: (root) CMD (nice -n 19 /usr/local/bin/mythlink.sh) May 15 23:40:01 mythtv /USR/SBIN/CRON[1122]: (root) CMD ([ -d /etc/shaper ] && /etc/init.d/shaper timecheck) May 15 23:50:01 mythtv /USR/SBIN/CRON[1130]: (root) CMD ([ -d /etc/shaper ] && /etc/init.d/shaper timecheck) May 16 00:00:01 mythtv /USR/SBIN/CRON[1139]: (root) CMD ([ -d /etc/shaper ] && /etc/init.d/shaper timecheck) Sorry for the huge post, but I'm loosing my mind. Any sugestions? |
Author: | Xsecrets [ Sun May 16, 2004 8:43 am ] |
Post subject: | |
what's the mythlink.sh stuff is that something you setup, or is that on by default in R4V3? |
Author: | cerlendson [ Sun May 16, 2004 9:12 am ] |
Post subject: | |
I didn't set that up, so it must be there by default. |
Page 1 of 1 | All times are UTC - 6 hours |
Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |