Author |
Message |
lhassell
|
Posted: Mon Jul 30, 2007 8:42 pm |
|
Joined: Wed Sep 27, 2006 4:47 pm
Posts: 46
|
OK... first, I've just upgraded my system... the new specs are:
Athlon-64 3000+ processor
MSI K9MM-V Mobo
1 gig memory
Nvidia GeForce Ti 4200
Hauppage PVR-150 MCE
1 250 gig Maxtor SATA HD (partitioned as sda1(50 gig root), sda2(10 gig swap), and sda3(190 gig storage partition)
1 250 gig WD IDE HD (partitioned as /myth, with previous data and backup)
1 IDE DVD-RW drive
PS2 keyboard and mouse
USB connections: APC UPS and MCE IR reciever
I've tried upgrading several times, both with the IDE drive installed and, as a test, with only the SATA drive and the DVD drive installed. Each time, I've gotten completely through the install, and have gotten through boot to X. It will then ask me for the root password. Usually it will freeze at this point, though a couple of times I have gotten as far as the mythtv-configure script. At any rate, the farthest it has gotten before freezing is when I would try to select an option in the configure menu. I don't know what else to try, and I am hoping that someone may have an idea how to fix this.
Note: I have attempted the procedures outlined in http://mysettopbox.tv/phpBB2/viewtopic.php?t=15338 and http://mysettopbox.tv/phpBB2/viewtopic.php?t=15324 and have met with no success.
Any help will be greatly appreciated.
|
|
Top |
|
![](images/spacer.gif) |
manicmike
|
Posted: Tue Jul 31, 2007 12:01 am |
|
Joined: Sun Aug 28, 2005 7:07 pm
Posts: 821
Location:
Melbourne, Australia
|
lhassell wrote: OK... first, I've just upgraded my system
First thing that springs to mind is a cpu overheating.
What does the CMOS say?
Mike
_________________ ********************* LinHES 7.4 Australian Dragon *********************
|
|
Top |
|
![](images/spacer.gif) |
lhassell
|
Posted: Tue Jul 31, 2007 5:41 am |
|
Joined: Wed Sep 27, 2006 4:47 pm
Posts: 46
|
CPU overheating shouldn't be an issue... I'm running with 3 case fans plus the processor fan, and the temperature sensor reads normal.
|
|
Top |
|
![](images/spacer.gif) |
manicmike
|
Posted: Tue Jul 31, 2007 9:01 pm |
|
Joined: Sun Aug 28, 2005 7:07 pm
Posts: 821
Location:
Melbourne, Australia
|
Next, you should probably have a look at debugging.
When it asks for the root password, don't type it in. Leave the system 5 minutes then type it in. If it freezes again, then it's not related to overheating (yes, I know you already said this, but it's good to see if it's at least time related).
On reboot, don't enter the root password, but pop up an xterm (alt-x) and have a look at the log files. You should be able to do this as the mythtv user, so type "ls /var/log/myth/". There should be a file in there called Knoppmyth-run.log or something (I'm not at my machine). Type "tail -20 /var/log/myth/<the file>" and have a look at the output. Does it give any clues? Try the other log files.
If you don't have any luck there, type "su -" and enter the root password. Does it crash then? The actual command being executed when it is crashing is the next thing to try. I'll look it up when you feed back the results of the above, if you don't find out anything useful. If you enter the commands from the script individually it will narrow down the cause of the problem.
Overall, though, it sounds like a hardware issue. Are you using a USB keyboard? What's a Nvidia GeForce Ti 4200 ? I don't know that card. Does it have a GPU?
Await yours
Mike
_________________ ********************* LinHES 7.4 Australian Dragon *********************
|
|
Top |
|
![](images/spacer.gif) |
lhassell
|
Posted: Tue Jul 31, 2007 9:15 pm |
|
Joined: Wed Sep 27, 2006 4:47 pm
Posts: 46
|
Thanks for the suggestions... had to work late tonight, will try your suggestions tomorrow.
Leif
|
|
Top |
|
![](images/spacer.gif) |
lhassell
|
Posted: Sun Aug 05, 2007 7:01 pm |
|
Joined: Wed Sep 27, 2006 4:47 pm
Posts: 46
|
OK... I've tried some other options. As far as I can ascertain, there is no problem with the hardware- I can leave up the install cd running as long as I want and the machine will still respond. Once I install to the hard drive, though, it freezes up more or less as soon as X starts. Sometimes it will show the background image, but more often I just get the X interface with the initial window asking for the root password and a gray moire pattern where the background image should be. I wonder if my graphics card is to blame, but can find nothing in the log files that will indicate why it is freezing. I have pulled off the log files- which ones would be useful to post?
|
|
Top |
|
![](images/spacer.gif) |
manicmike
|
Posted: Sun Aug 05, 2007 7:13 pm |
|
Joined: Sun Aug 28, 2005 7:07 pm
Posts: 821
Location:
Melbourne, Australia
|
lhassell wrote: which ones would be useful to post?
I'd look at (in order):
/home/mythtv/.xsession-errors
/var/log/Xorg.log
/var/log/myth/mythfrontend.log
/var/log/myth/mythbackend.log
/var/log/messages
Mike
_________________ ********************* LinHES 7.4 Australian Dragon *********************
|
|
Top |
|
![](images/spacer.gif) |
lhassell
|
Posted: Mon Aug 06, 2007 4:28 pm |
|
Joined: Wed Sep 27, 2006 4:47 pm
Posts: 46
|
OK, having checked the logs myself, I didn't see anything that jumped out at me, but my linux-fu is not strong. Here are the logs:
Thanks again for all the help.
/home/mythtv/.xsession-errors
Code: Xsession: X session started for mythtv at Mon Aug 6 01:45:05 PDT 2007 Failed to read: session.ignoreBorder Setting default value Failed to read: session.forcePseudoTransparency Setting default value Failed to read: session.numLayers Setting default value Failed to read: session.tabPadding Setting default value Failed to read: session.focusTabMinWidth Setting default value Failed to read: session.appsFile Setting default value Failed to read: session.tabsAttachArea Setting default value Failed to read: session.useMod1 Setting default value Failed to read: session.screen0.opaqueMove Setting default value Failed to read: session.screen0.autoRaise Setting default value Failed to read: session.screen0.clickRaises Setting default value Failed to read: session.screen0.decorateTransient Setting default value Failed to read: session.screen0.resizeMode Setting default value Failed to read: session.screen0.windowMenu Setting default value Failed to read: session.screen0.tabFocusModel Setting default value Failed to read: session.screen0.followModel Setting default value Failed to read: session.screen0.window.focus.alpha Setting default value Failed to read: session.screen0.window.unfocus.alpha Setting default value Failed to read: session.screen0.menu.alpha Setting default value Failed to read: session.screen0.menuDelay Setting default value Failed to read: session.screen0.menuDelayClose Setting default value Failed to read: session.screen0.menuMode Setting default value Failed to read: session.screen0.overlay.lineWidth Setting default value Failed to read: session.screen0.overlay.lineStyle Setting default value Failed to read: session.screen0.overlay.joinStyle Setting default value Failed to read: session.screen0.overlay.capStyle Setting default value Failed to read: session.screen0.windowScrollAction Setting default value Failed to read: session.screen0.windowScrollReverse Setting default value BScreen::BScreen: managing screen 0 using visual 0x21, depth 24 Failed to read: session.ignoreBorder Setting default value Failed to read: session.forcePseudoTransparency Setting default value Failed to read: session.numLayers Setting default value Failed to read: session.tabPadding Setting default value Failed to read: session.focusTabMinWidth Setting default value Failed to read: session.appsFile Setting default value Failed to read: session.tabsAttachArea Setting default value Failed to read: session.useMod1 Setting default value Failed to read: session.screen0.opaqueMove Setting default value Failed to read: session.screen0.autoRaise Setting default value Failed to read: session.screen0.clickRaises Setting default value Failed to read: session.screen0.decorateTransient Setting default value Failed to read: session.screen0.resizeMode Setting default value Failed to read: session.screen0.windowMenu Setting default value Failed to read: session.screen0.tabFocusModel Setting default value Failed to read: session.screen0.followModel Setting default value Failed to read: session.screen0.window.focus.alpha Setting default value Failed to read: session.screen0.window.unfocus.alpha Setting default value Failed to read: session.screen0.menu.alpha Setting default value Failed to read: session.screen0.menuDelay Setting default value Failed to read: session.screen0.menuDelayClose Setting default value Failed to read: session.screen0.menuMode Setting default value Failed to read: session.screen0.overlay.lineWidth Setting default value Failed to read: session.screen0.overlay.lineStyle Setting default value Failed to read: session.screen0.overlay.joinStyle Setting default value Failed to read: session.screen0.overlay.capStyle Setting default value Failed to read: session.screen0.windowScrollAction Setting default value Failed to read: session.screen0.windowScrollReverse Setting default value Failed to read: session.ignoreBorder Setting default value Failed to read: session.forcePseudoTransparency Setting default value Failed to read: session.numLayers Setting default value Failed to read: session.tabPadding Setting default value Failed to read: session.focusTabMinWidth Setting default value Failed to read: session.appsFile Setting default value Failed to read: session.tabsAttachArea Setting default value Failed to read: session.useMod1 Setting default value Failed to read: session.screen0.opaqueMove Setting default value Failed to read: session.screen0.autoRaise Setting default value Failed to read: session.screen0.clickRaises Setting default value Failed to read: session.screen0.decorateTransient Setting default value Failed to read: session.screen0.resizeMode Setting default value Failed to read: session.screen0.windowMenu Setting default value Failed to read: session.screen0.tabFocusModel Setting default value Failed to read: session.screen0.followModel Setting default value Failed to read: session.screen0.window.focus.alpha Setting default value Failed to read: session.screen0.window.unfocus.alpha Setting default value Failed to read: session.screen0.menu.alpha Setting default value Failed to read: session.screen0.menuDelay Setting default value Failed to read: session.screen0.menuDelayClose Setting default value Failed to read: session.screen0.menuMode Setting default value Failed to read: session.screen0.overlay.lineWidth Setting default value Failed to read: session.screen0.overlay.lineStyle Setting default value Failed to read: session.screen0.overlay.joinStyle Setting default value Failed to read: session.screen0.overlay.capStyle Setting default value Failed to read: session.screen0.windowScrollAction Setting default value Failed to read: session.screen0.windowScrollReverse Setting default value Failed to read: session.screen0.slit.maxOver Setting default value Failed to read: session.screen0.slit.alpha Setting default value Failed to read: session.screen0.slit.layer Setting default value PORT=5900 Failed to read: session.screen0.toolbar.maxOver Setting default value Failed to read: session.screen0.toolbar.visible Setting default value Failed to read: session.screen0.toolbar.alpha Setting default value Failed to read: session.screen0.toolbar.layer Setting default value Failed to read: session.screen0.toolbar.height Setting default value Failed to read: session.screen0.toolbar.tools Setting default value Failed to read: session.screen0.iconbar.mode Setting default value Failed to read: session.screen0.iconbar.deiconifyMode Setting default value Failed to read: session.screen0.iconbar.wheelMode Setting default value Failed to read: session.screen0.iconbar.alignment Setting default value Failed to read: session.screen0.iconbar.iconWidth Setting default value Failed to read: session.screen0.iconbar.iconTextPadding Setting default value Failed to read: session.screen0.iconbar.usePixmap Setting default value
/var/log/Xorg.log (appeared as Xorg.0.log)Code: X Window System Version 7.1.1 Release Date: 12 May 2006 X Protocol Version 11, Revision 0, Release 7.1.1 Build Operating System: UNKNOWN Current Operating System: Linux box 2.6.18-chw-13 #1 SMP PREEMPT Tue Mar 6 19:57:00 PST 2007 i686 Build Date: 09 January 2007 Before reporting problems, check http://wiki.x.org to make sure that you have the latest version. Module Loader present Markers: (--) probed, (**) from config file, (==) default setting, (++) from command line, (!!) notice, (II) informational, (WW) warning, (EE) error, (NI) not implemented, (??) unknown. (==) Log file: "/var/log/Xorg.0.log", Time: Mon Aug 6 01:45:01 2007 (==) Using config file: "/etc/X11/xorg.conf" (==) ServerLayout "XFree86 Configured" (**) |-->Screen "Screen0" (0) (**) | |-->Monitor "Monitor0" (**) | |-->Device "Card0" (**) |-->Input Device "Keyboard0" (**) |-->Input Device "USB Mouse" (WW) The directory "/usr/share/fonts/X11/Speedo" does not exist. Entry deleted from font path. (WW) The directory "/usr/share/fonts/X11/PEX" does not exist. Entry deleted from font path. (WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist. Entry deleted from font path. (WW) The directory "/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType" does not exist. Entry deleted from font path. (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/truetype". Entry deleted from font path. (Run 'mkfontdir' on "/usr/share/fonts/truetype"). (WW) The directory "/usr/share/fonts/latex-ttf-fonts" does not exist. Entry deleted from font path. (**) FontPath set to: /usr/share/fonts/X11/misc:unscaled, /usr/share/fonts/X11/75dpi:unscaled, /usr/share/fonts/X11/100dpi:unscaled, /usr/share/fonts/X11/Type1 (**) RgbPath set to "/usr/share/X11/rgb" (**) ModulePath set to "/usr/lib/xorg/modules" (**) Option "AllowMouseOpenFail" "true" (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory) (II) No APM support in BIOS or kernel (II) Module ABI versions: X.Org ANSI C Emulation: 0.3 X.Org Video Driver: 1.0 X.Org XInput driver : 0.6 X.Org Server Extension : 0.3 X.Org Font Renderer : 0.5 (II) Loader running on linux (II) LoadModule: "bitmap" (II) Loading /usr/lib/xorg/modules/fonts/libbitmap.so (II) Module bitmap: vendor="X.Org Foundation" compiled for 7.1.1, module version = 1.0.0 Module class: X.Org Font Renderer ABI class: X.Org Font Renderer, version 0.5 (II) Loading font Bitmap (II) LoadModule: "pcidata" (II) Loading /usr/lib/xorg/modules/libpcidata.so (II) Module pcidata: vendor="X.Org Foundation" compiled for 7.1.1, module version = 1.0.0 ABI class: X.Org Video Driver, version 1.0 (--) using VT number 7
(II) PCI: PCI scan (all values are in hex) (II) PCI: 00:00:0: chip 1106,0204 card 1106,0204 rev 00 class 06,00,00 hdr 80 (II) PCI: 00:00:1: chip 1106,1204 card 0000,0000 rev 00 class 06,00,00 hdr 00 (II) PCI: 00:00:2: chip 1106,2204 card 0000,0000 rev 00 class 06,00,00 hdr 00 (II) PCI: 00:00:3: chip 1106,3204 card 0000,0000 rev 00 class 06,00,00 hdr 00 (II) PCI: 00:00:4: chip 1106,4204 card 0000,0000 rev 00 class 06,00,00 hdr 00 (II) PCI: 00:00:7: chip 1106,7204 card 0000,0000 rev 00 class 06,00,00 hdr 00 (II) PCI: 00:01:0: chip 1106,b188 card 0000,0000 rev 00 class 06,04,00 hdr 01 (II) PCI: 00:09:0: chip 4444,0016 card 0070,8801 rev 01 class 04,00,00 hdr 00 (II) PCI: 00:0f:0: chip 1106,3149 card 1462,7312 rev 80 class 01,01,8f hdr 80 (II) PCI: 00:0f:1: chip 1106,0571 card 1462,7312 rev 06 class 01,01,8a hdr 00 (II) PCI: 00:10:0: chip 1106,3038 card 1462,7312 rev 81 class 0c,03,00 hdr 80 (II) PCI: 00:10:1: chip 1106,3038 card 1462,7312 rev 81 class 0c,03,00 hdr 80 (II) PCI: 00:10:2: chip 1106,3038 card 1462,7312 rev 81 class 0c,03,00 hdr 80 (II) PCI: 00:10:3: chip 1106,3038 card 1462,7312 rev 81 class 0c,03,00 hdr 80 (II) PCI: 00:10:4: chip 1106,3104 card 1462,7312 rev 86 class 0c,03,20 hdr 80 (II) PCI: 00:11:0: chip 1106,3227 card 1106,3227 rev 00 class 06,01,00 hdr 80 (II) PCI: 00:11:5: chip 1106,3059 card 1462,b013 rev 60 class 04,01,00 hdr 00 (II) PCI: 00:12:0: chip 1106,3065 card 1462,7312 rev 78 class 02,00,00 hdr 00 (II) PCI: 00:18:0: chip 1022,1100 card 0000,0000 rev 00 class 06,00,00 hdr 80 (II) PCI: 00:18:1: chip 1022,1101 card 0000,0000 rev 00 class 06,00,00 hdr 80 (II) PCI: 00:18:2: chip 1022,1102 card 0000,0000 rev 00 class 06,00,00 hdr 80 (II) PCI: 00:18:3: chip 1022,1103 card 0000,0000 rev 00 class 06,00,00 hdr 80 (II) PCI: 01:00:0: chip 10de,0253 card 1462,8702 rev a3 class 03,00,00 hdr 00 (II) PCI: End of PCI scan (II) Host-to-PCI bridge: (II) Bus 0: bridge is at (0:0:0), (0,0,1), BCTRL: 0x0008 (VGA_EN is set) (II) Bus 0 I/O range: [0] -1 0 0x00000000 - 0x0000ffff (0x10000) IX[B] (II) Bus 0 non-prefetchable memory range: [0] -1 0 0x00000000 - 0xffffffff (0x0) MX[B] (II) Bus 0 prefetchable memory range: [0] -1 0 0x00000000 - 0xffffffff (0x0) MX[B] (II) PCI-to-PCI bridge: (II) Bus 1: bridge is at (0:1:0), (0,1,1), BCTRL: 0x000a (VGA_EN is set) (II) Bus 1 non-prefetchable memory range: [0] -1 0 0xf4000000 - 0xf5ffffff (0x2000000) MX[B] (II) Bus 1 prefetchable memory range: [0] -1 0 0xe0000000 - 0xefffffff (0x10000000) MX[B] (II) PCI-to-ISA bridge: (II) Bus -1: bridge is at (0:17:0), (0,-1,-1), BCTRL: 0x0008 (VGA_EN is set) (--) PCI: (0:9:0) unknown vendor (0x4444) unknown chipset (0x0016) rev 1, Mem @ 0xf0000000/26 (--) PCI:*(1:0:0) nVidia Corporation NV25 [GeForce4 Ti 4200] rev 163, Mem @ 0xf4000000/24, 0xe0000000/27, 0xe8000000/19 (II) Addressable bus resource ranges are [0] -1 0 0x00000000 - 0xffffffff (0x0) MX[B] [1] -1 0 0x00000000 - 0x0000ffff (0x10000) IX[B] (II) OS-reported resource ranges: [0] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B) [1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B] [2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B] [3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B] [4] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B] [5] -1 0 0x00000000 - 0x000000ff (0x100) IX[B] (II) PCI Memory resource overlap reduced 0xd8000000 from 0xdfffffff to 0xd7ffffff (II) Active PCI resource ranges: [0] -1 0 0xf6001000 - 0xf60010ff (0x100) MX[B] [1] -1 0 0xf6000000 - 0xf60000ff (0x100) MX[B] [2] -1 0 0xd8000000 - 0xd7ffffff (0x0) MX[B]O [3] -1 0 0xe8000000 - 0xe807ffff (0x80000) MX[B](B) [4] -1 0 0xe0000000 - 0xe7ffffff (0x8000000) MX[B](B) [5] -1 0 0xf4000000 - 0xf4ffffff (0x1000000) MX[B](B) [6] -1 0 0xf0000000 - 0xf3ffffff (0x4000000) MX[B](B) [7] -1 0 0x0000dc00 - 0x0000dcff (0x100) IX[B] [8] -1 0 0x0000d400 - 0x0000d4ff (0x100) IX[B] [9] -1 0 0x0000e600 - 0x0000e61f (0x20) IX[B] [10] -1 0 0x0000e500 - 0x0000e51f (0x20) IX[B] [11] -1 0 0x0000e400 - 0x0000e41f (0x20) IX[B] [12] -1 0 0x0000e300 - 0x0000e31f (0x20) IX[B] [13] -1 0 0x0000e200 - 0x0000e20f (0x10) IX[B] [14] -1 0 0x0000d000 - 0x0000d0ff (0x100) IX[B] [15] -1 0 0x0000e000 - 0x0000e00f (0x10) IX[B] [16] -1 0 0x0000e900 - 0x0000e903 (0x4) IX[B] [17] -1 0 0x0000e800 - 0x0000e807 (0x8) IX[B] [18] -1 0 0x0000e700 - 0x0000e703 (0x4) IX[B] [19] -1 0 0x0000e100 - 0x0000e107 (0x8) IX[B] (II) Active PCI resource ranges after removing overlaps: [0] -1 0 0xf6001000 - 0xf60010ff (0x100) MX[B] [1] -1 0 0xf6000000 - 0xf60000ff (0x100) MX[B] [2] -1 0 0xd8000000 - 0xd7ffffff (0x0) MX[B]O [3] -1 0 0xe8000000 - 0xe807ffff (0x80000) MX[B](B) [4] -1 0 0xe0000000 - 0xe7ffffff (0x8000000) MX[B](B) [5] -1 0 0xf4000000 - 0xf4ffffff (0x1000000) MX[B](B) [6] -1 0 0xf0000000 - 0xf3ffffff (0x4000000) MX[B](B) [7] -1 0 0x0000dc00 - 0x0000dcff (0x100) IX[B] [8] -1 0 0x0000d400 - 0x0000d4ff (0x100) IX[B] [9] -1 0 0x0000e600 - 0x0000e61f (0x20) IX[B] [10] -1 0 0x0000e500 - 0x0000e51f (0x20) IX[B] [11] -1 0 0x0000e400 - 0x0000e41f (0x20) IX[B] [12] -1 0 0x0000e300 - 0x0000e31f (0x20) IX[B] [13] -1 0 0x0000e200 - 0x0000e20f (0x10) IX[B] [14] -1 0 0x0000d000 - 0x0000d0ff (0x100) IX[B] [15] -1 0 0x0000e000 - 0x0000e00f (0x10) IX[B] [16] -1 0 0x0000e900 - 0x0000e903 (0x4) IX[B] [17] -1 0 0x0000e800 - 0x0000e807 (0x8) IX[B] [18] -1 0 0x0000e700 - 0x0000e703 (0x4) IX[B] [19] -1 0 0x0000e100 - 0x0000e107 (0x8) IX[B] (II) OS-reported resource ranges after removing overlaps with PCI: [0] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B) [1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B] [2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B] [3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B] [4] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B] [5] -1 0 0x00000000 - 0x000000ff (0x100) IX[B] (II) All system resource ranges: [0] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B) [1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B] [2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B] [3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B] [4] -1 0 0xf6001000 - 0xf60010ff (0x100) MX[B] [5] -1 0 0xf6000000 - 0xf60000ff (0x100) MX[B] [6] -1 0 0xd8000000 - 0xd7ffffff (0x0) MX[B]O [7] -1 0 0xe8000000 - 0xe807ffff (0x80000) MX[B](B) [8] -1 0 0xe0000000 - 0xe7ffffff (0x8000000) MX[B](B) [9] -1 0 0xf4000000 - 0xf4ffffff (0x1000000) MX[B](B) [10] -1 0 0xf0000000 - 0xf3ffffff (0x4000000) MX[B](B) [11] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B] [12] -1 0 0x00000000 - 0x000000ff (0x100) IX[B] [13] -1 0 0x0000dc00 - 0x0000dcff (0x100) IX[B] [14] -1 0 0x0000d400 - 0x0000d4ff (0x100) IX[B] [15] -1 0 0x0000e600 - 0x0000e61f (0x20) IX[B] [16] -1 0 0x0000e500 - 0x0000e51f (0x20) IX[B] [17] -1 0 0x0000e400 - 0x0000e41f (0x20) IX[B] [18] -1 0 0x0000e300 - 0x0000e31f (0x20) IX[B] [19] -1 0 0x0000e200 - 0x0000e20f (0x10) IX[B] [20] -1 0 0x0000d000 - 0x0000d0ff (0x100) IX[B] [21] -1 0 0x0000e000 - 0x0000e00f (0x10) IX[B] [22] -1 0 0x0000e900 - 0x0000e903 (0x4) IX[B] [23] -1 0 0x0000e800 - 0x0000e807 (0x8) IX[B] [24] -1 0 0x0000e700 - 0x0000e703 (0x4) IX[B] [25] -1 0 0x0000e100 - 0x0000e107 (0x8) IX[B] (II) LoadModule: "dbe" (II) Loading /usr/lib/xorg/modules/extensions/libdbe.so (II) Module dbe: vendor="X.Org Foundation" compiled for 7.1.1, module version = 1.0.0 Module class: X.Org Server Extension ABI class: X.Org Server Extension, version 0.3 (II) Loading extension DOUBLE-BUFFER (II) LoadModule: "glx" (II) Loading /usr/lib/xorg/modules/extensions/libglx.so (II) Module glx: vendor="NVIDIA Corporation" compiled for 4.0.2, module version = 1.0.8776 Module class: X.Org Server Extension ABI class: X.Org Server Extension, version 0.1 (II) Loading extension GLX (II) LoadModule: "freetype" (II) Loading /usr/lib/xorg/modules/fonts/libfreetype.so (II) Module freetype: vendor="X.Org Foundation & the After X-TT Project" compiled for 7.1.1, module version = 2.1.0 Module class: X.Org Font Renderer ABI class: X.Org Font Renderer, version 0.5 (II) Loading font FreeType (II) LoadModule: "type1" (II) Loading /usr/lib/xorg/modules/fonts/libtype1.so (II) Module type1: vendor="X.Org Foundation" compiled for 7.1.1, module version = 1.0.2 Module class: X.Org Font Renderer ABI class: X.Org Font Renderer, version 0.5 (II) Loading font Type1 (II) LoadModule: "record" (II) Loading /usr/lib/xorg/modules/extensions/librecord.so (II) Module record: vendor="X.Org Foundation" compiled for 7.1.1, module version = 1.13.0 Module class: X.Org Server Extension ABI class: X.Org Server Extension, version 0.3 (II) Loading extension RECORD (II) LoadModule: "extmod" (II) Loading /usr/lib/xorg/modules/extensions/libextmod.so (II) Module extmod: vendor="X.Org Foundation" compiled for 7.1.1, module version = 1.0.0 Module class: X.Org Server Extension ABI class: X.Org Server Extension, version 0.3 (II) Loading extension SHAPE (II) Loading extension MIT-SUNDRY-NONSTANDARD (II) Loading extension BIG-REQUESTS (II) Loading extension SYNC (II) Loading extension MIT-SCREEN-SAVER (II) Loading extension XC-MISC (II) Loading extension XFree86-VidModeExtension (II) Loading extension XFree86-Misc (II) Loading extension DPMS (II) Loading extension TOG-CUP (II) Loading extension Extended-Visual-Information (II) Loading extension XVideo (II) Loading extension XVideo-MotionCompensation (II) Loading extension X-Resource (II) LoadModule: "nvidia" (II) Loading /usr/lib/xorg/modules/drivers/nvidia_drv.o (II) Module nvidia: vendor="NVIDIA Corporation" compiled for 4.0.2, module version = 1.0.8776 Module class: X.Org Video Driver (II) LoadModule: "kbd" (II) Loading /usr/lib/xorg/modules/input/kbd_drv.so (II) Module kbd: vendor="X.Org Foundation" compiled for 7.1.1, module version = 1.1.0 Module class: X.Org XInput Driver ABI class: X.Org XInput driver, version 0.6 (II) LoadModule: "mouse" (II) Loading /usr/lib/xorg/modules/input/mouse_drv.so (II) Module mouse: vendor="X.Org Foundation" compiled for 7.1.1, module version = 1.1.1 Module class: X.Org XInput Driver ABI class: X.Org XInput driver, version 0.6 (II) NVIDIA X Driver 1.0-8776 Mon Oct 16 21:58:46 PDT 2006 (II) NVIDIA Unified Driver for all Supported NVIDIA GPUs (II) Primary Device is: PCI 01:00:0 (--) Assigning device section with no busID to primary device (--) Chipset NVIDIA GPU found (II) Loading sub module "fb" (II) LoadModule: "fb" (II) Loading /usr/lib/xorg/modules/libfb.so (II) Module fb: vendor="X.Org Foundation" compiled for 7.1.1, module version = 1.0.0 ABI class: X.Org ANSI C Emulation, version 0.3 (II) Loading sub module "ramdac" (II) LoadModule: "ramdac" (II) Loading /usr/lib/xorg/modules/libramdac.so (II) Module ramdac: vendor="X.Org Foundation" compiled for 7.1.1, module version = 0.1.0 ABI class: X.Org Video Driver, version 1.0 (II) resource ranges after xf86ClaimFixedResources() call: [0] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B) [1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B] [2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B] [3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B] [4] -1 0 0xf6001000 - 0xf60010ff (0x100) MX[B] [5] -1 0 0xf6000000 - 0xf60000ff (0x100) MX[B] [6] -1 0 0xd8000000 - 0xd7ffffff (0x0) MX[B]O [7] -1 0 0xe8000000 - 0xe807ffff (0x80000) MX[B](B) [8] -1 0 0xe0000000 - 0xe7ffffff (0x8000000) MX[B](B) [9] -1 0 0xf4000000 - 0xf4ffffff (0x1000000) MX[B](B) [10] -1 0 0xf0000000 - 0xf3ffffff (0x4000000) MX[B](B) [11] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B] [12] -1 0 0x00000000 - 0x000000ff (0x100) IX[B] [13] -1 0 0x0000dc00 - 0x0000dcff (0x100) IX[B] [14] -1 0 0x0000d400 - 0x0000d4ff (0x100) IX[B] [15] -1 0 0x0000e600 - 0x0000e61f (0x20) IX[B] [16] -1 0 0x0000e500 - 0x0000e51f (0x20) IX[B] [17] -1 0 0x0000e400 - 0x0000e41f (0x20) IX[B] [18] -1 0 0x0000e300 - 0x0000e31f (0x20) IX[B] [19] -1 0 0x0000e200 - 0x0000e20f (0x10) IX[B] [20] -1 0 0x0000d000 - 0x0000d0ff (0x100) IX[B] [21] -1 0 0x0000e000 - 0x0000e00f (0x10) IX[B] [22] -1 0 0x0000e900 - 0x0000e903 (0x4) IX[B] [23] -1 0 0x0000e800 - 0x0000e807 (0x8) IX[B] [24] -1 0 0x0000e700 - 0x0000e703 (0x4) IX[B] [25] -1 0 0x0000e100 - 0x0000e107 (0x8) IX[B] (II) resource ranges after probing: [0] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B) [1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B] [2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B] [3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B] [4] -1 0 0xf6001000 - 0xf60010ff (0x100) MX[B] [5] -1 0 0xf6000000 - 0xf60000ff (0x100) MX[B] [6] -1 0 0xd8000000 - 0xd7ffffff (0x0) MX[B]O [7] -1 0 0xe8000000 - 0xe807ffff (0x80000) MX[B](B) [8] -1 0 0xe0000000 - 0xe7ffffff (0x8000000) MX[B](B) [9] -1 0 0xf4000000 - 0xf4ffffff (0x1000000) MX[B](B) [10] -1 0 0xf0000000 - 0xf3ffffff (0x4000000) MX[B](B) [11] 0 0 0x000a0000 - 0x000affff (0x10000) MS[B] [12] 0 0 0x000b0000 - 0x000b7fff (0x8000) MS[B] [13] 0 0 0x000b8000 - 0x000bffff (0x8000) MS[B] [14] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B] [15] -1 0 0x00000000 - 0x000000ff (0x100) IX[B] [16] -1 0 0x0000dc00 - 0x0000dcff (0x100) IX[B] [17] -1 0 0x0000d400 - 0x0000d4ff (0x100) IX[B] [18] -1 0 0x0000e600 - 0x0000e61f (0x20) IX[B] [19] -1 0 0x0000e500 - 0x0000e51f (0x20) IX[B] [20] -1 0 0x0000e400 - 0x0000e41f (0x20) IX[B] [21] -1 0 0x0000e300 - 0x0000e31f (0x20) IX[B] [22] -1 0 0x0000e200 - 0x0000e20f (0x10) IX[B] [23] -1 0 0x0000d000 - 0x0000d0ff (0x100) IX[B] [24] -1 0 0x0000e000 - 0x0000e00f (0x10) IX[B] [25] -1 0 0x0000e900 - 0x0000e903 (0x4) IX[B] [26] -1 0 0x0000e800 - 0x0000e807 (0x8) IX[B] [27] -1 0 0x0000e700 - 0x0000e703 (0x4) IX[B] [28] -1 0 0x0000e100 - 0x0000e107 (0x8) IX[B] [29] 0 0 0x000003b0 - 0x000003bb (0xc) IS[B] [30] 0 0 0x000003c0 - 0x000003df (0x20) IS[B] (II) Setting vga for screen 0. (**) NVIDIA(0): Depth 24, (--) framebuffer bpp 32 (==) NVIDIA(0): RGB weight 888 (==) NVIDIA(0): Default visual is TrueColor (==) NVIDIA(0): Using gamma correction (1.0, 1.0, 1.0) (**) NVIDIA(0): Option "UseEdidDpi" "FALSE" (**) NVIDIA(0): Option "DPI" "100 x 100" (**) NVIDIA(0): Enabling RENDER acceleration (II) NVIDIA(0): NVIDIA GPU GeForce4 Ti 4200 at PCI:1:0:0 (--) NVIDIA(0): VideoRAM: 131072 kBytes (--) NVIDIA(0): VideoBIOS: 04.25.00.29.00 (II) NVIDIA(0): Detected AGP rate: 4X (--) NVIDIA(0): Interlaced video modes are supported on this GPU (--) NVIDIA(0): Connected display device(s) on GeForce4 Ti 4200 at PCI:1:0:0: (--) NVIDIA(0): Philips 7104 TV Encoder (TV-0) (--) NVIDIA(0): Philips 7104 TV Encoder (TV-0): 165.0 MHz maximum pixel clock (--) NVIDIA(0): TV encoder: Philips 7104 (II) NVIDIA(0): Assigned Display Device: TV-0 (II) NVIDIA(0): Validated modes: (II) NVIDIA(0): "800x600" (II) NVIDIA(0): "640x480" (II) NVIDIA(0): Virtual screen size determined to be 800 x 600 (II) Loading sub module "int10" (II) LoadModule: "int10" (II) Loading /usr/lib/xorg/modules/libint10.so (II) Module int10: vendor="X.Org Foundation" compiled for 7.1.1, module version = 1.0.0 ABI class: X.Org Video Driver, version 1.0 (II) NVIDIA(0): Primary V_BIOS segment is: 0xc000 (++) NVIDIA(0): DPI set to (100, 100); computed from -dpi X commandline option (--) Depth 24 pixmap format is 32 bpp (II) do I need RAC? No, I don't. (II) resource ranges after preInit: [0] 0 0 0xe8000000 - 0xe807ffff (0x80000) MX[B] [1] 0 0 0xe0000000 - 0xe7ffffff (0x8000000) MX[B] [2] 0 0 0xf4000000 - 0xf4ffffff (0x1000000) MX[B] [3] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B) [4] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B] [5] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B] [6] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B] [7] -1 0 0xf6001000 - 0xf60010ff (0x100) MX[B] [8] -1 0 0xf6000000 - 0xf60000ff (0x100) MX[B] [9] -1 0 0xd8000000 - 0xd7ffffff (0x0) MX[B]O [10] -1 0 0xe8000000 - 0xe807ffff (0x80000) MX[B](B) [11] -1 0 0xe0000000 - 0xe7ffffff (0x8000000) MX[B](B) [12] -1 0 0xf4000000 - 0xf4ffffff (0x1000000) MX[B](B) [13] -1 0 0xf0000000 - 0xf3ffffff (0x4000000) MX[B](B) [14] 0 0 0x000a0000 - 0x000affff (0x10000) MS[B](OprD) [15] 0 0 0x000b0000 - 0x000b7fff (0x8000) MS[B](OprD) [16] 0 0 0x000b8000 - 0x000bffff (0x8000) MS[B](OprD) [17] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B] [18] -1 0 0x00000000 - 0x000000ff (0x100) IX[B] [19] -1 0 0x0000dc00 - 0x0000dcff (0x100) IX[B] [20] -1 0 0x0000d400 - 0x0000d4ff (0x100) IX[B] [21] -1 0 0x0000e600 - 0x0000e61f (0x20) IX[B] [22] -1 0 0x0000e500 - 0x0000e51f (0x20) IX[B] [23] -1 0 0x0000e400 - 0x0000e41f (0x20) IX[B] [24] -1 0 0x0000e300 - 0x0000e31f (0x20) IX[B] [25] -1 0 0x0000e200 - 0x0000e20f (0x10) IX[B] [26] -1 0 0x0000d000 - 0x0000d0ff (0x100) IX[B] [27] -1 0 0x0000e000 - 0x0000e00f (0x10) IX[B] [28] -1 0 0x0000e900 - 0x0000e903 (0x4) IX[B] [29] -1 0 0x0000e800 - 0x0000e807 (0x8) IX[B] [30] -1 0 0x0000e700 - 0x0000e703 (0x4) IX[B] [31] -1 0 0x0000e100 - 0x0000e107 (0x8) IX[B] [32] 0 0 0x000003b0 - 0x000003bb (0xc) IS[B](OprU) [33] 0 0 0x000003c0 - 0x000003df (0x20) IS[B](OprU) (II) NVIDIA(0): Setting mode "800x600" (II) Loading extension NV-GLX (II) NVIDIA(0): NVIDIA 3D Acceleration Architecture Initialized (II) NVIDIA(0): Using the NVIDIA 2D acceleration architecture (==) NVIDIA(0): Backing store disabled (==) NVIDIA(0): Silken mouse enabled (**) Option "dpms" "true" (**) NVIDIA(0): DPMS enabled (II) Loading extension NV-CONTROL (==) RandR enabled (II) Initializing built-in extension MIT-SHM (II) Initializing built-in extension XInputExtension (II) Initializing built-in extension XTEST (II) Initializing built-in extension XKEYBOARD (II) Initializing built-in extension XC-APPGROUP (II) Initializing built-in extension SECURITY (II) Initializing built-in extension XINERAMA (II) Initializing built-in extension XFIXES (II) Initializing built-in extension XFree86-Bigfont (II) Initializing built-in extension RENDER (II) Initializing built-in extension RANDR (II) Initializing built-in extension COMPOSITE (II) Initializing built-in extension DAMAGE (II) Initializing built-in extension XEVIE (II) Initializing extension GLX (**) Option "CoreKeyboard" (**) Keyboard0: Core Keyboard (**) Option "Protocol" "standard" (**) Keyboard0: Protocol: standard (**) Option "AutoRepeat" "500 30" (**) Option "XkbRules" "xorg" (**) Keyboard0: XkbRules: "xorg" (**) Option "XkbModel" "pc105" (**) Keyboard0: XkbModel: "pc105" (**) Option "XkbLayout" "us" (**) Keyboard0: XkbLayout: "us" (**) Option "CustomKeycodes" "off" (**) Keyboard0: CustomKeycodes disabled (**) Option "Protocol" "IMPS/2" (**) USB Mouse: Device: "/dev/input/mice" (**) USB Mouse: Protocol: "IMPS/2" (**) Option "SendCoreEvents" "true" (**) USB Mouse: always reports core events (**) Option "CorePointer" (**) USB Mouse: Core Pointer (**) Option "Device" "/dev/input/mice" (**) Option "Buttons" "5" (==) USB Mouse: Emulate3Buttons, Emulate3Timeout: 50 (**) Option "ZAxisMapping" "4 5" (**) USB Mouse: ZAxisMapping: buttons 4 and 5 (**) USB Mouse: Buttons: 9 (II) XINPUT: Adding extended input device "USB Mouse" (type: MOUSE) (II) XINPUT: Adding extended input device "Keyboard0" (type: KEYBOARD) (II) XINPUT: Adding extended input device "NVIDIA Event Handler" (type: Other) xkb_keycodes { include "xfree86+aliases(qwerty)" }; xkb_types { include "complete" }; xkb_compatibility { include "complete" }; xkb_symbols { include "pc(pc105)+us" }; xkb_geometry { include "pc(pc105)" }; (II) USB Mouse: ps2EnableDataReporting: succeeded
/var/log/myth/mythfrontend.log did not exist. /var/log/myth/mythbackend.logCode: 2007-08-06 01:44:34.065 Using runtime prefix = /usr 2007-08-06 01:44:34.380 New DB connection, total: 1 2007-08-06 01:44:34.439 Connected to database 'mythconverg' at host: localhost 2007-08-06 01:44:34.509 Current Schema Version: 2007-08-06 01:44:34.552 Newest Schema Version : 1160 2007-08-06 01:44:34.627 New DB connection, total: 2 2007-08-06 01:44:34.661 Connected to database 'mythconverg' at host: localhost 2007-08-06 01:44:34.761 Setting Lock for Database Schema upgrade. If you see a long pause here it means the Schema is already locked and is being upgraded by another Myth process. 2007-08-06 01:44:34.829 New DB connection, total: 3 2007-08-06 01:44:34.883 Connected to database 'mythconverg' at host: localhost 2007-08-06 01:44:34.913 Inserting MythTV initial database information. 2007-08-06 01:44:34.972 New DB connection, total: 4 2007-08-06 01:44:35.038 Connected to database 'mythconverg' at host: localhost 2007-08-06 01:44:35.088 Upgrading to schema version 1112 2007-08-06 01:44:38.076 New DB connection, total: 5 2007-08-06 01:44:38.264 Connected to database 'mythconverg' at host: localhost 2007-08-06 01:44:38.399 Upgrading to schema version 1113 2007-08-06 01:44:38.515 Upgrading to schema version 1114 2007-08-06 01:44:38.624 Upgrading to schema version 1115 2007-08-06 01:44:38.751 Upgrading to schema version 1116 2007-08-06 01:44:38.826 Upgrading to schema version 1117 2007-08-06 01:44:38.945 Upgrading to schema version 1118 2007-08-06 01:44:39.440 Upgrading to schema version 1119 2007-08-06 01:44:39.541 Upgrading to schema version 1120 2007-08-06 01:44:39.650 Upgrading to schema version 1121 2007-08-06 01:44:39.742 Upgrading to schema version 1122 2007-08-06 01:44:39.844 Upgrading to schema version 1123 2007-08-06 01:44:39.954 Upgrading to schema version 1124 2007-08-06 01:44:40.079 Upgrading to schema version 1125 2007-08-06 01:44:40.308 Upgrading to schema version 1126 2007-08-06 01:44:40.418 Upgrading to schema version 1127 2007-08-06 01:44:40.612 Upgrading to schema version 1128 2007-08-06 01:44:41.053 Upgrading to schema version 1129 2007-08-06 01:44:41.293 Upgrading to schema version 1130 2007-08-06 01:44:41.376 Upgrading to schema version 1131 2007-08-06 01:44:41.545 Upgrading to schema version 1132 2007-08-06 01:44:41.679 Upgrading to schema version 1133 2007-08-06 01:44:41.805 Upgrading to schema version 1134 2007-08-06 01:44:41.881 Upgrading to schema version 1135 2007-08-06 01:44:42.058 Upgrading to schema version 1136 2007-08-06 01:44:42.178 Upgrading to schema version 1137 2007-08-06 01:44:42.329 Upgrading to schema version 1138 2007-08-06 01:44:42.379 Upgrading to schema version 1139 2007-08-06 01:44:42.999 Upgrading to schema version 1140 2007-08-06 01:44:43.091 Upgrading to schema version 1141 2007-08-06 01:44:43.243 Upgrading to schema version 1142 2007-08-06 01:44:43.371 Upgrading to schema version 1143 2007-08-06 01:44:43.501 Upgrading to schema version 1144 2007-08-06 01:44:43.581 Upgrading to schema version 1145 2007-08-06 01:44:43.707 Upgrading to schema version 1146 2007-08-06 01:44:43.783 Upgrading to schema version 1147 2007-08-06 01:44:44.217 Upgrading to schema version 1148 2007-08-06 01:44:44.422 Upgrading to schema version 1149 2007-08-06 01:44:44.516 Upgrading to schema version 1150 2007-08-06 01:44:44.623 Upgrading to schema version 1151 2007-08-06 01:44:44.826 Upgrading to schema version 1152 2007-08-06 01:44:44.960 Upgrading to schema version 1153 2007-08-06 01:44:45.154 Upgrading to schema version 1154 2007-08-06 01:44:45.391 Upgrading to schema version 1155 2007-08-06 01:44:45.894 Upgrading to schema version 1156 2007-08-06 01:44:46.069 Upgrading to schema version 1157 2007-08-06 01:44:46.137 Upgrading to schema version 1158 2007-08-06 01:44:46.408 Upgrading to schema version 1159 2007-08-06 01:44:46.561 Upgrading to schema version 1160 2007-08-06 01:44:46.643 Database Schema upgrade complete, unlocking. No setting found for this machine's BackendServerIP. Please run setup on this machine and modify the first page of the general settings.
Continued next post...
|
|
Top |
|
![](images/spacer.gif) |
lhassell
|
Posted: Mon Aug 06, 2007 4:36 pm |
|
Joined: Wed Sep 27, 2006 4:47 pm
Posts: 46
|
/var/log/messages
Code: Aug 6 01:44:24 box syslogd 1.4.1#20: restart. Aug 6 01:44:24 box kernel: klogd 1.4.1#20, log source = /proc/kmsg started. Aug 6 01:44:24 box kernel: Linux version 2.6.18-chw-13 (root@mythtv) (gcc version 4.1.2 20061115 (prerelease) (Debian 4.1.1-21)) #1 SMP PREEMPT Tue Mar 6 19:57:00 PST 2007 Aug 6 01:44:24 box kernel: BIOS-provided physical RAM map: Aug 6 01:44:24 box kernel: BIOS-e820: 0000000000000000 - 000000000009f800 (usable) Aug 6 01:44:24 box kernel: BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved) Aug 6 01:44:24 box kernel: BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved) Aug 6 01:44:24 box kernel: BIOS-e820: 0000000000100000 - 000000003fef0000 (usable) Aug 6 01:44:24 box kernel: BIOS-e820: 000000003fef0000 - 000000003fef3000 (ACPI NVS) Aug 6 01:44:24 box kernel: BIOS-e820: 000000003fef3000 - 000000003ff00000 (ACPI data) Aug 6 01:44:24 box kernel: BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved) Aug 6 01:44:24 box kernel: 126MB HIGHMEM available. Aug 6 01:44:24 box kernel: 896MB LOWMEM available. Aug 6 01:44:24 box kernel: found SMP MP-table at 000f39a0 Aug 6 01:44:24 box kernel: DMI 2.3 present. Aug 6 01:44:24 box kernel: ACPI: PM-Timer IO Port: 0x4008 Aug 6 01:44:24 box kernel: ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) Aug 6 01:44:24 box kernel: Processor #0 15:15 APIC version 16 Aug 6 01:44:24 box kernel: ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] disabled) Aug 6 01:44:24 box kernel: ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) Aug 6 01:44:24 box kernel: ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) Aug 6 01:44:24 box kernel: ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) Aug 6 01:44:24 box kernel: IOAPIC[0]: apic_id 2, version 3, address 0xfec00000, GSI 0-23 Aug 6 01:44:24 box kernel: ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) Aug 6 01:44:24 box kernel: ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level) Aug 6 01:44:24 box kernel: Enabling APIC mode: Flat. Using 1 I/O APICs Aug 6 01:44:24 box kernel: Using ACPI (MADT) for SMP configuration information Aug 6 01:44:24 box kernel: Allocating PCI resources starting at 40000000 (gap: 3ff00000:bed00000) Aug 6 01:44:24 box kernel: Detected 1800.060 MHz processor. Aug 6 01:44:24 box kernel: Built 1 zonelists. Total pages: 261872 Aug 6 01:44:24 box kernel: Kernel command line: auto BOOT_IMAGE=Linux ro root=801 nomce apm=power-off quiet screen=800x600 kde resume2=swap:/dev/sda2 noresume2 Aug 6 01:44:24 box kernel: Enabling fast FPU save and restore... done. Aug 6 01:44:24 box kernel: Enabling unmasked SIMD FPU exception support... done. Aug 6 01:44:24 box kernel: Initializing CPU#0 Aug 6 01:44:24 box kernel: PID hash table entries: 4096 (order: 12, 16384 bytes) Aug 6 01:44:24 box kernel: Console: colour VGA+ 80x25 Aug 6 01:44:24 box kernel: Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) Aug 6 01:44:24 box kernel: Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) Aug 6 01:44:24 box kernel: Memory: 1031296k/1047488k available (4292k kernel code, 15608k reserved, 1348k data, 268k init, 129984k highmem) Aug 6 01:44:24 box kernel: Checking if this processor honours the WP bit even in supervisor mode... Ok. Aug 6 01:44:24 box kernel: Calibrating delay using timer specific routine.. 3602.72 BogoMIPS (lpj=1801360) Aug 6 01:44:24 box kernel: Security Framework v1.0.0 initialized Aug 6 01:44:24 box kernel: Capability LSM initialized Aug 6 01:44:24 box kernel: Mount-cache hash table entries: 512 Aug 6 01:44:24 box kernel: CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) Aug 6 01:44:24 box kernel: CPU: L2 Cache: 512K (64 bytes/line) Aug 6 01:44:24 box kernel: Compat vDSO mapped to ffffe000. Aug 6 01:44:24 box kernel: Checking 'hlt' instruction... OK. Aug 6 01:44:24 box kernel: SMP alternatives: switching to UP code Aug 6 01:44:24 box kernel: Freeing SMP alternatives: 20k freed Aug 6 01:44:24 box kernel: ACPI: Core revision 20060707 Aug 6 01:44:24 box kernel: CPU0: AMD Athlon(tm) 64 Processor 3000+ stepping 02 Aug 6 01:44:24 box kernel: Total of 1 processors activated (3602.72 BogoMIPS). Aug 6 01:44:24 box kernel: ENABLING IO-APIC IRQs Aug 6 01:44:24 box kernel: ..TIMER: vector=0x31 apic1=0 pin1=2 apic2=0 pin2=0 Aug 6 01:44:24 box kernel: Brought up 1 CPUs Aug 6 01:44:24 box kernel: migration_cost=0 Aug 6 01:44:24 box kernel: checking if image is initramfs...it isn't (no cpio magic); looks like an initrd Aug 6 01:44:24 box kernel: Freeing initrd memory: 266k freed Aug 6 01:44:24 box kernel: NET: Registered protocol family 16 Aug 6 01:44:24 box kernel: ACPI: bus type pci registered Aug 6 01:44:24 box kernel: PCI: PCI BIOS revision 2.10 entry at 0xfa5d0, last bus=1 Aug 6 01:44:24 box kernel: PCI: Using configuration type 1 Aug 6 01:44:24 box kernel: Setting up standard PCI resources Aug 6 01:44:24 box kernel: ACPI: Interpreter enabled Aug 6 01:44:24 box kernel: ACPI: Using IOAPIC for interrupt routing Aug 6 01:44:24 box kernel: ACPI: PCI Root Bridge [PCI0] (0000:00) Aug 6 01:44:24 box kernel: ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 6 7 *10 11 12) Aug 6 01:44:24 box kernel: ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 6 7 10 *11 12) Aug 6 01:44:24 box kernel: ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 6 7 10 11 12) *5 Aug 6 01:44:24 box kernel: ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 6 7 10 11 12) *0, disabled. Aug 6 01:44:24 box kernel: ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 6 7 10 11 12) *0, disabled. Aug 6 01:44:24 box kernel: ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 6 7 10 11 12) *0, disabled. Aug 6 01:44:24 box kernel: ACPI: PCI Interrupt Link [LNK0] (IRQs 3 4 6 7 10 11 12) *0, disabled. Aug 6 01:44:24 box kernel: ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 6 7 10 11 12) *0, disabled. Aug 6 01:44:24 box kernel: ACPI: PCI Interrupt Link [ALKA] (IRQs *20) Aug 6 01:44:24 box kernel: ACPI: PCI Interrupt Link [ALKB] (IRQs *21) Aug 6 01:44:24 box kernel: ACPI: PCI Interrupt Link [ALKC] (IRQs *22) Aug 6 01:44:24 box kernel: ACPI: PCI Interrupt Link [ALKD] (IRQs *23) Aug 6 01:44:24 box kernel: Linux Plug and Play Support v0.97 (c) Adam Belay Aug 6 01:44:24 box kernel: pnp: PnP ACPI init Aug 6 01:44:24 box kernel: pnp: PnP ACPI: found 14 devices Aug 6 01:44:24 box kernel: PnPBIOS: Disabled by ACPI PNP Aug 6 01:44:24 box kernel: SCSI subsystem initialized Aug 6 01:44:24 box kernel: PCI: Using ACPI for IRQ routing Aug 6 01:44:24 box kernel: PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report Aug 6 01:44:24 box kernel: pnp: 00:02: ioport range 0x4000-0x407f could not be reserved Aug 6 01:44:24 box kernel: pnp: 00:02: ioport range 0x5000-0x500f has been reserved Aug 6 01:44:24 box kernel: PCI: Bridge: 0000:00:01.0 Aug 6 01:44:24 box kernel: IO window: disabled. Aug 6 01:44:24 box kernel: MEM window: f4000000-f5ffffff Aug 6 01:44:24 box kernel: PREFETCH window: e0000000-efffffff Aug 6 01:44:24 box kernel: NET: Registered protocol family 2 Aug 6 01:44:24 box kernel: IP route cache hash table entries: 32768 (order: 5, 131072 bytes) Aug 6 01:44:24 box kernel: TCP established hash table entries: 131072 (order: 8, 1572864 bytes) Aug 6 01:44:24 box kernel: TCP bind hash table entries: 65536 (order: 7, 786432 bytes) Aug 6 01:44:24 box kernel: TCP: Hash tables configured (established 131072 bind 65536) Aug 6 01:44:24 box kernel: TCP reno registered Aug 6 01:44:24 box kernel: audit: initializing netlink socket (disabled) Aug 6 01:44:24 box kernel: audit(1186389843.570:1): initialized Aug 6 01:44:24 box kernel: highmem bounce pool size: 64 pages Aug 6 01:44:24 box kernel: Total HugeTLB memory allocated, 0 Aug 6 01:44:24 box kernel: VFS: Disk quotas dquot_6.5.1 Aug 6 01:44:24 box kernel: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) Aug 6 01:44:24 box kernel: JFS: nTxBlock = 8060, nTxLock = 64486 Aug 6 01:44:24 box kernel: SGI XFS with ACLs, security attributes, realtime, large block numbers, no debug enabled Aug 6 01:44:24 box kernel: SGI XFS Quota Management subsystem Aug 6 01:44:24 box kernel: Initializing Cryptographic API Aug 6 01:44:24 box kernel: io scheduler noop registered Aug 6 01:44:24 box kernel: io scheduler anticipatory registered Aug 6 01:44:24 box kernel: io scheduler deadline registered (default) Aug 6 01:44:24 box kernel: io scheduler cfq registered Aug 6 01:44:24 box kernel: isapnp: Scanning for PnP cards... Aug 6 01:44:24 box kernel: isapnp: No Plug & Play device found Aug 6 01:44:24 box kernel: Real Time Clock Driver v1.12ac Aug 6 01:44:24 box kernel: FDC 0 is a post-1991 82077 Aug 6 01:44:24 box kernel: RAMDISK driver initialized: 16 RAM disks of 4096K size 1024 blocksize Aug 6 01:44:24 box kernel: loop: loaded (max 8 devices) Aug 6 01:44:24 box kernel: Intel(R) PRO/1000 Network Driver - version 7.1.9-k4 Aug 6 01:44:24 box kernel: Copyright (c) 1999-2006 Intel Corporation. Aug 6 01:44:24 box kernel: pcnet32.c:v1.32 18.Mar.2006 tsbogend@alpha.franken.de Aug 6 01:44:24 box kernel: e100: Intel(R) PRO/100 Network Driver, 3.5.10-k2-NAPI Aug 6 01:44:24 box kernel: e100: Copyright(c) 1999-2005 Intel Corporation Aug 6 01:44:24 box kernel: ns83820.c: National Semiconductor DP83820 10/100/1000 driver. Aug 6 01:44:24 box kernel: via-rhine.c:v1.10-LK1.4.1 July-24-2006 Written by Donald Becker Aug 6 01:44:24 box kernel: ACPI: PCI Interrupt Link [ALKD] enabled at IRQ 23 Aug 6 01:44:24 box kernel: ACPI: PCI Interrupt 0000:00:12.0[A] -> Link [ALKD] -> GSI 23 (level, low) -> IRQ 16 Aug 6 01:44:24 box kernel: eth0: VIA Rhine II at 0xf6001000, 00:19:db:ac:ad:3f, IRQ 16. Aug 6 01:44:24 box kernel: eth0: MII PHY found at address 1, status 0x786d advertising 01e1 Link 41e1. Aug 6 01:44:24 box kernel: forcedeth.c: Reverse Engineered nForce ethernet driver. Version 0.56. Aug 6 01:44:24 box kernel: dmfe: Davicom DM9xxx net driver, version 1.36.4 (2002-01-17) Aug 6 01:44:24 box kernel: winbond-840.c:v1.01-d (2.4 port) Nov-17-2001 Donald Becker <becker@scyld.com> Aug 6 01:44:24 box kernel: http://www.scyld.com/network/drivers.html Aug 6 01:44:24 box kernel: uli526x: ULi M5261/M5263 net driver, version 0.9.3 (2005-7-29) Aug 6 01:44:24 box kernel: Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 Aug 6 01:44:24 box kernel: ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx Aug 6 01:44:24 box kernel: VP_IDE: IDE controller at PCI slot 0000:00:0f.1 Aug 6 01:44:24 box kernel: ACPI: PCI Interrupt Link [ALKA] enabled at IRQ 20 Aug 6 01:44:24 box kernel: ACPI: PCI Interrupt 0000:00:0f.1[A] -> Link [ALKA] -> GSI 20 (level, low) -> IRQ 17 Aug 6 01:44:24 box kernel: PCI: VIA IRQ fixup for 0000:00:0f.1, from 255 to 1 Aug 6 01:44:24 box kernel: VP_IDE: chipset revision 6 Aug 6 01:44:24 box kernel: VP_IDE: not 100%% native mode: will probe irqs later Aug 6 01:44:24 box kernel: VP_IDE: VIA vt8237 (rev 00) IDE UDMA133 controller on pci0000:00:0f.1 Aug 6 01:44:24 box kernel: ide0: BM-DMA at 0xe200-0xe207, BIOS settings: hda:DMA, hdb:DMA Aug 6 01:44:24 box kernel: ide1: BM-DMA at 0xe208-0xe20f, BIOS settings: hdc:pio, hdd:pio Aug 6 01:44:24 box kernel: hda: WDC WD2500JB-00REA0, ATA DISK drive Aug 6 01:44:24 box kernel: hdb: LITE-ON DVDRW LDW-851S, ATAPI CD/DVD-ROM drive Aug 6 01:44:24 box kernel: ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 Aug 6 01:44:24 box kernel: hda: max request size: 512KiB Aug 6 01:44:24 box kernel: hda: Host Protected Area detected. Aug 6 01:44:24 box kernel: ^Icurrent capacity is 66055248 sectors (33820 MB) Aug 6 01:44:24 box kernel: ^Inative capacity is 488397168 sectors (250059 MB) Aug 6 01:44:24 box kernel: hda: Host Protected Area disabled. Aug 6 01:44:24 box kernel: hda: 488397168 sectors (250059 MB) w/8192KiB Cache, CHS=30401/255/63, UDMA(100) Aug 6 01:44:24 box kernel: hda: cache flushes supported Aug 6 01:44:24 box kernel: hda: hda1 Aug 6 01:44:24 box kernel: hdb: ATAPI 40X DVD-ROM DVD-R CD-R/RW drive, 2048kB Cache, UDMA(33) Aug 6 01:44:24 box kernel: Uniform CD-ROM driver Revision: 3.20 Aug 6 01:44:24 box kernel: Loading iSCSI transport class v1.1-646.<7>libata version 2.00 loaded. Aug 6 01:44:24 box kernel: ACPI: PCI Interrupt 0000:00:0f.0[B] -> Link [ALKA] -> GSI 20 (level, low) -> IRQ 17 Aug 6 01:44:24 box kernel: sata_via 0000:00:0f.0: routed to hard irq line 11 Aug 6 01:44:24 box kernel: ata1: SATA max UDMA/133 cmd 0xE100 ctl 0xE702 bmdma 0xE000 irq 17 Aug 6 01:44:24 box kernel: ata2: SATA max UDMA/133 cmd 0xE800 ctl 0xE902 bmdma 0xE008 irq 17 Aug 6 01:44:24 box kernel: scsi0 : sata_via Aug 6 01:44:24 box kernel: ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300) Aug 6 01:44:24 box kernel: ata1.00: ATA-7, max UDMA/133, 490234752 sectors: LBA48 Aug 6 01:44:24 box kernel: ata1.00: ata1: dev 0 multi count 16 Aug 6 01:44:24 box kernel: ata1.00: configured for UDMA/133 Aug 6 01:44:24 box kernel: scsi1 : sata_via Aug 6 01:44:24 box kernel: ata2: SATA link down 1.5 Gbps (SStatus 0 SControl 300) Aug 6 01:44:24 box kernel: ATA: abnormal status 0x7F on port 0xE807 Aug 6 01:44:24 box kernel: Vendor: ATA Model: Maxtor 7Y250M0 Rev: YAR5 Aug 6 01:44:24 box kernel: Type: Direct-Access ANSI SCSI revision: 05 Aug 6 01:44:24 box kernel: SCSI device sda: 490234752 512-byte hdwr sectors (251000 MB) Aug 6 01:44:24 box kernel: sda: Write Protect is off Aug 6 01:44:24 box kernel: SCSI device sda: drive cache: write through Aug 6 01:44:24 box kernel: SCSI device sda: 490234752 512-byte hdwr sectors (251000 MB) Aug 6 01:44:24 box kernel: sda: Write Protect is off Aug 6 01:44:24 box kernel: SCSI device sda: drive cache: write through Aug 6 01:44:24 box kernel: sda: sda1 sda2 sda3 Aug 6 01:44:24 box kernel: sd 0:0:0:0: Attached scsi disk sda Aug 6 01:44:24 box kernel: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12 Aug 6 01:44:24 box kernel: serio: i8042 AUX port at 0x60,0x64 irq 12 Aug 6 01:44:24 box kernel: serio: i8042 KBD port at 0x60,0x64 irq 1 Aug 6 01:44:24 box kernel: mice: PS/2 mouse device common for all mice Aug 6 01:44:24 box kernel: md: linear personality registered for level -1 Aug 6 01:44:24 box kernel: md: raid0 personality registered for level 0 Aug 6 01:44:24 box kernel: md: raid1 personality registered for level 1 Aug 6 01:44:24 box kernel: raid6: int32x1 765 MB/s Aug 6 01:44:24 box kernel: raid6: int32x2 699 MB/s Aug 6 01:44:24 box kernel: raid6: int32x4 535 MB/s Aug 6 01:44:24 box kernel: raid6: int32x8 492 MB/s Aug 6 01:44:24 box kernel: raid6: mmxx1 1449 MB/s Aug 6 01:44:24 box kernel: raid6: mmxx2 2656 MB/s Aug 6 01:44:24 box kernel: input: AT Translated Set 2 keyboard as /class/input/input0 Aug 6 01:44:24 box kernel: raid6: sse1x1 1425 MB/s Aug 6 01:44:24 box kernel: raid6: sse1x2 2359 MB/s Aug 6 01:44:24 box kernel: raid6: sse2x1 2464 MB/s Aug 6 01:44:24 box kernel: raid6: sse2x2 3339 MB/s Aug 6 01:44:24 box kernel: raid6: using algorithm sse2x2 (3339 MB/s) Aug 6 01:44:24 box kernel: md: raid6 personality registered for level 6 Aug 6 01:44:24 box kernel: md: raid5 personality registered for level 5 Aug 6 01:44:24 box kernel: md: raid4 personality registered for level 4 Aug 6 01:44:24 box kernel: raid5: automatically using best checksumming function: pIII_sse Aug 6 01:44:24 box kernel: pIII_sse : 5480.000 MB/sec Aug 6 01:44:24 box kernel: raid5: using function: pIII_sse (5480.000 MB/sec) Aug 6 01:44:24 box kernel: md: md driver 0.90.3 MAX_MD_DEVS=256, MD_SB_DISKS=27 Aug 6 01:44:24 box kernel: md: bitmap version 4.39 Aug 6 01:44:24 box kernel: device-mapper: ioctl: 4.7.0-ioctl (2006-06-24) initialised: dm-devel@redhat.com Aug 6 01:44:24 box kernel: NET: Registered protocol family 1 Aug 6 01:44:24 box kernel: NET: Registered protocol family 15 Aug 6 01:44:24 box kernel: Using IPI No-Shortcut mode Aug 6 01:44:24 box kernel: Suspend2 Core. Aug 6 01:44:24 box kernel: Suspend2 Userspace UI Support module loaded. Aug 6 01:44:24 box kernel: Suspend2 Userspace Storage Manager module loaded. Aug 6 01:44:24 box kernel: Suspend2 Compressor module loaded. Aug 6 01:44:24 box kernel: Suspend2 Encryptor module loaded. Aug 6 01:44:24 box kernel: Suspend2 Block I/O module loaded. Aug 6 01:44:24 box kernel: Suspend2 Swap Allocator module loaded. Aug 6 01:44:24 box kernel: ACPI: (supports S0 S1 S4 S5) Aug 6 01:44:24 box kernel: md: Autodetecting RAID arrays. Aug 6 01:44:24 box kernel: md: autorun ... Aug 6 01:44:24 box kernel: md: ... autorun DONE. Aug 6 01:44:24 box kernel: RAMDISK: Compressed image found at block 0 Aug 6 01:44:24 box kernel: Time: tsc clocksource has been installed. Aug 6 01:44:24 box kernel: VFS: Mounted root (ext2 filesystem). Aug 6 01:44:24 box kernel: ieee1394: sbp2: Driver forced to serialize I/O (serialize_io=1) Aug 6 01:44:24 box kernel: ieee1394: sbp2: Try serialize_io=0 for better performance Aug 6 01:44:24 box kernel: usbcore: registered new driver usbfs Aug 6 01:44:24 box kernel: usbcore: registered new driver hub Aug 6 01:44:24 box kernel: Suspend2 2.2.8.4: SwapAllocator: Signature found. Aug 6 01:44:24 box kernel: Suspend2 2.2.8.4: Resuming enabled. Aug 6 01:44:24 box kernel: Suspend2 2.2.8.4: Normal swapspace found. Aug 6 01:44:24 box kernel: Suspend2 2.2.8.4: No image found. Aug 6 01:44:24 box kernel: Suspend2 2.2.8.4: Resuming disabled as requested. Aug 6 01:44:24 box kernel: kjournald starting. Commit interval 5 seconds Aug 6 01:44:24 box kernel: EXT3 FS on sda1, internal journal Aug 6 01:44:24 box kernel: EXT3-fs: mounted filesystem with ordered data mode. Aug 6 01:44:24 box kernel: Freeing unused kernel memory: 268k freed Aug 6 01:44:24 box kernel: input: ImExPS/2 Logitech Explorer Mouse as /class/input/input1 Aug 6 01:44:24 box kernel: ts: Compaq touchscreen protocol output Aug 6 01:44:24 box kernel: Linux agpgart interface v0.101 (c) Dave Jones Aug 6 01:44:24 box kernel: pci_hotplug: PCI Hot Plug PCI Core version: 0.5 Aug 6 01:44:24 box kernel: agpgart: Detected AGP bridge 0 Aug 6 01:44:24 box kernel: agpgart: AGP aperture is 128M @ 0xd8000000 Aug 6 01:44:24 box kernel: shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 Aug 6 01:44:24 box kernel: Linux video capture interface: v2.00 Aug 6 01:44:24 box kernel: USB Universal Host Controller Interface driver v3.0 Aug 6 01:44:24 box kernel: ACPI: PCI Interrupt Link [ALKB] enabled at IRQ 21 Aug 6 01:44:24 box kernel: ACPI: PCI Interrupt 0000:00:10.0[A] -> Link [ALKB] -> GSI 21 (level, low) -> IRQ 18 Aug 6 01:44:24 box kernel: PCI: VIA IRQ fixup for 0000:00:10.0, from 10 to 2 Aug 6 01:44:24 box kernel: uhci_hcd 0000:00:10.0: UHCI Host Controller Aug 6 01:44:24 box kernel: uhci_hcd 0000:00:10.0: new USB bus registered, assigned bus number 1 Aug 6 01:44:24 box kernel: uhci_hcd 0000:00:10.0: irq 18, io base 0x0000e300 Aug 6 01:44:24 box kernel: usb usb1: configuration #1 chosen from 1 choice Aug 6 01:44:24 box kernel: hub 1-0:1.0: USB hub found Aug 6 01:44:24 box kernel: hub 1-0:1.0: 2 ports detected Aug 6 01:44:24 box kernel: Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing disabled Aug 6 01:44:24 box kernel: serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A Aug 6 01:44:24 box kernel: serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A Aug 6 01:44:24 box kernel: ACPI: PCI Interrupt 0000:00:10.1[A] -> Link [ALKB] -> GSI 21 (level, low) -> IRQ 18 Aug 6 01:44:24 box kernel: PCI: VIA IRQ fixup for 0000:00:10.1, from 10 to 2 Aug 6 01:44:24 box kernel: uhci_hcd 0000:00:10.1: UHCI Host Controller Aug 6 01:44:24 box kernel: uhci_hcd 0000:00:10.1: new USB bus registered, assigned bus number 2 Aug 6 01:44:24 box kernel: uhci_hcd 0000:00:10.1: irq 18, io base 0x0000e400 Aug 6 01:44:24 box kernel: usb usb2: configuration #1 chosen from 1 choice Aug 6 01:44:24 box kernel: hub 2-0:1.0: USB hub found Aug 6 01:44:24 box kernel: hub 2-0:1.0: 2 ports detected Aug 6 01:44:24 box kernel: 00:09: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A Aug 6 01:44:24 box kernel: 00:0a: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A Aug 6 01:44:24 box kernel: parport: PnPBIOS parport detected. Aug 6 01:44:24 box kernel: parport0: PC-style at 0x378, irq 7 [PCSPP] Aug 6 01:44:24 box kernel: ACPI: PCI Interrupt 0000:00:10.2[B] -> Link [ALKB] -> GSI 21 (level, low) -> IRQ 18 Aug 6 01:44:24 box kernel: PCI: VIA IRQ fixup for 0000:00:10.2, from 11 to 2 Aug 6 01:44:24 box kernel: uhci_hcd 0000:00:10.2: UHCI Host Controller Aug 6 01:44:24 box kernel: uhci_hcd 0000:00:10.2: new USB bus registered, assigned bus number 3 Aug 6 01:44:24 box kernel: uhci_hcd 0000:00:10.2: irq 18, io base 0x0000e500 Aug 6 01:44:24 box kernel: usb usb3: configuration #1 chosen from 1 choice Aug 6 01:44:24 box kernel: hub 3-0:1.0: USB hub found Aug 6 01:44:24 box kernel: hub 3-0:1.0: 2 ports detected Aug 6 01:44:24 box kernel: ACPI: PCI Interrupt 0000:00:10.3[B] -> Link [ALKB] -> GSI 21 (level, low) -> IRQ 18 Aug 6 01:44:24 box kernel: PCI: VIA IRQ fixup for 0000:00:10.3, from 11 to 2 Aug 6 01:44:24 box kernel: uhci_hcd 0000:00:10.3: UHCI Host Controller Aug 6 01:44:24 box kernel: uhci_hcd 0000:00:10.3: new USB bus registered, assigned bus number 4 Aug 6 01:44:24 box kernel: uhci_hcd 0000:00:10.3: irq 18, io base 0x0000e600 Aug 6 01:44:24 box kernel: usb usb4: configuration #1 chosen from 1 choice Aug 6 01:44:24 box kernel: hub 4-0:1.0: USB hub found Aug 6 01:44:24 box kernel: hub 4-0:1.0: 2 ports detected Aug 6 01:44:24 box kernel: usb 1-2: new low speed USB device using uhci_hcd and address 2 Aug 6 01:44:24 box kernel: ACPI: PCI Interrupt 0000:00:10.4[C] -> Link [ALKB] -> GSI 21 (level, low) -> IRQ 18 Aug 6 01:44:24 box kernel: PCI: VIA IRQ fixup for 0000:00:10.4, from 5 to 2 Aug 6 01:44:24 box kernel: ehci_hcd 0000:00:10.4: EHCI Host Controller Aug 6 01:44:24 box kernel: ehci_hcd 0000:00:10.4: new USB bus registered, assigned bus number 5 Aug 6 01:44:24 box kernel: ehci_hcd 0000:00:10.4: irq 18, io mem 0xf6000000 Aug 6 01:44:24 box kernel: ehci_hcd 0000:00:10.4: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 Aug 6 01:44:24 box kernel: usb usb5: configuration #1 chosen from 1 choice Aug 6 01:44:24 box kernel: hub 5-0:1.0: USB hub found Aug 6 01:44:24 box kernel: hub 5-0:1.0: 8 ports detected Aug 6 01:44:24 box kernel: ivtv: ==================== START INIT IVTV ==================== Aug 6 01:44:24 box kernel: ivtv: version 0.10.1 (tagged release) loading Aug 6 01:44:24 box kernel: ivtv: Linux version: 2.6.18-chw-13 SMP preempt mod_unload 586 gcc-4.1 Aug 6 01:44:24 box kernel: ivtv: In case of problems please include the debug info between Aug 6 01:44:24 box kernel: ivtv: the START INIT IVTV and END INIT IVTV lines, along with Aug 6 01:44:24 box kernel: ivtv: any module options, when mailing the ivtv-users mailinglist. Aug 6 01:44:24 box kernel: ivtv0: Autodetected Hauppauge card (cx23416 based) Aug 6 01:44:24 box kernel: ACPI: PCI Interrupt 0000:00:09.0[A] -> GSI 17 (level, low) -> IRQ 19 Aug 6 01:44:24 box kernel: ivtv0: Unreasonably low latency timer, setting to 64 (was 32) Aug 6 01:44:24 box kernel: ivtv0: loaded v4l-cx2341x-enc.fw firmware (376836 bytes) Aug 6 01:44:24 box kernel: ivtv0: Encoder revision: 0x02060039 Aug 6 01:44:24 box kernel: tuner 1-0061: chip found @ 0xc2 (ivtv i2c driver #0) Aug 6 01:44:24 box kernel: tveeprom 1-0050: Hauppauge model 26582, rev C699, serial# 8901693 Aug 6 01:44:24 box kernel: tveeprom 1-0050: tuner model is TCL 2002N 5H (idx 99, type 50) Aug 6 01:44:24 box kernel: tveeprom 1-0050: TV standards NTSC(M) (eeprom 0x08) Aug 6 01:44:24 box kernel: tveeprom 1-0050: audio processor is CX25843 (idx 37) Aug 6 01:44:24 box kernel: tveeprom 1-0050: decoder processor is CX25843 (idx 30) Aug 6 01:44:24 box kernel: tveeprom 1-0050: has no radio, has no IR receiver, has no IR transmitter Aug 6 01:44:24 box kernel: ivtv0: Autodetected Hauppauge WinTV PVR-150 Aug 6 01:44:24 box kernel: cx25840 1-0044: cx25843-23 found @ 0x88 (ivtv i2c driver #0) Aug 6 01:44:24 box kernel: usb 1-2: new low speed USB device using uhci_hcd and address 3 Aug 6 01:44:24 box kernel: usb 1-2: configuration #1 chosen from 1 choice Aug 6 01:44:24 box kernel: usb 2-2: new full speed USB device using uhci_hcd and address 2 Aug 6 01:44:24 box kernel: usb 2-2: configuration #1 chosen from 1 choice Aug 6 01:44:24 box kernel: usbcore: registered new driver hiddev Aug 6 01:44:24 box kernel: lirc_dev: IR Remote Control driver registered, at major 61 Aug 6 01:44:24 box kernel: Aug 6 01:44:24 box kernel: lirc_mceusb2: Philips eHome USB IR Transciever and Microsoft MCE 2005 Remote Control driver for LIRC v0.26 Aug 6 01:44:24 box kernel: lirc_mceusb2: Daniel Melander <lirc@rajidae.se>, Martin Blatter <martin_a_blatter@yahoo.com> Aug 6 01:44:24 box kernel: hiddev96: USB HID v1.10 Device [APC Back-UPS ES 350 FW:823.B1.D USB FW:B1] on usb-0000:00:10.0-2 Aug 6 01:44:24 box kernel: usbcore: registered new driver usbhid Aug 6 01:44:24 box kernel: drivers/usb/input/hid-core.c: v2.6:USB HID core driver Aug 6 01:44:24 box kernel: usb 2-2: reset full speed USB device using uhci_hcd and address 2 Aug 6 01:44:24 box kernel: lirc_dev: lirc_register_plugin: sample_rate: 0 Aug 6 01:44:24 box kernel: lirc_mceusb2[2]: SMK eHome Infrared Transceiver on usb2:2 Aug 6 01:44:24 box kernel: usbcore: registered new driver lirc_mceusb2 Aug 6 01:44:24 box kernel: cx25840 1-0044: loaded v4l-cx25840.fw firmware (16382 bytes) Aug 6 01:44:24 box kernel: wm8775 1-001b: chip found @ 0x36 (ivtv i2c driver #0) Aug 6 01:44:24 box kernel: ivtv0: Registered device video0 for encoder MPEG (4 MB) Aug 6 01:44:24 box kernel: ivtv0: Registered device video32 for encoder YUV (2 MB) Aug 6 01:44:24 box kernel: ivtv0: Registered device vbi0 for encoder VBI (1 MB) Aug 6 01:44:24 box kernel: ivtv0: Registered device video24 for encoder PCM audio (1 MB) Aug 6 01:44:24 box kernel: tuner 1-0061: type set to 50 (TCL 2002N) Aug 6 01:44:24 box kernel: ivtv0: Initialized Hauppauge WinTV PVR-150, card #0 Aug 6 01:44:24 box kernel: ivtv: ==================== END INIT IVTV ==================== Aug 6 01:44:24 box kernel: ACPI: PCI Interrupt Link [ALKC] enabled at IRQ 22 Aug 6 01:44:24 box kernel: ACPI: PCI Interrupt 0000:00:11.5[C] -> Link [ALKC] -> GSI 22 (level, low) -> IRQ 20 Aug 6 01:44:24 box kernel: Adding 979956k swap on /dev/sda2. Priority:-1 extents:1 across:979956k Aug 6 01:44:24 box kernel: EXT3 FS on sda1, internal journal Aug 6 01:44:24 box kernel: bttv: driver version 0.9.17 loaded Aug 6 01:44:24 box kernel: bttv: using 8 buffers with 2080k (520 pages) each for capture Aug 6 01:44:24 box kernel: bt878: AUDIO driver version 0.0.0 loaded Aug 6 01:44:24 box kernel: Non-volatile memory driver v1.2 Aug 6 01:44:24 box kernel: saa7130/34: v4l2 driver version 0.2.14 loaded Aug 6 01:44:24 box kernel: cx2388x cx88-mpeg Driver Manager version 0.0.6 loaded Aug 6 01:44:24 box kernel: cx2388x dvb driver version 0.0.6 loaded Aug 6 01:44:24 box kernel: cx8802_register_driver() ->registering driver type=dvb access=shared Aug 6 01:44:24 box kernel: Initializing USB Mass Storage driver... Aug 6 01:44:24 box kernel: usbcore: registered new driver usb-storage Aug 6 01:44:24 box kernel: USB Mass Storage support registered. Aug 6 01:44:24 box kernel: Registering unionfs 20061031-1310 Aug 6 01:44:24 box kernel: unionfs: debugging is not enabled Aug 6 01:44:24 box kernel: ACPI: Power Button (FF) [PWRF] Aug 6 01:44:24 box kernel: ACPI: Power Button (CM) [PWRB] Aug 6 01:44:24 box kernel: ACPI: Fan [FAN] (on) Aug 6 01:44:24 box kernel: ACPI Exception (acpi_processor-0681): AE_NOT_FOUND, Processor Device is not present [20060707] Aug 6 01:44:24 box kernel: ACPI: Thermal Zone [THRM] (40 C) Aug 6 01:44:24 box kernel: fuse init (API version 7.7) Aug 6 01:44:24 box kernel: NET: Registered protocol family 17 Aug 6 01:44:24 box kernel: NET: Registered protocol family 10 Aug 6 01:44:24 box kernel: lo: Disabled Privacy Extensions Aug 6 01:44:24 box kernel: IPv6 over IPv4 tunneling driver Aug 6 01:45:02 box kernel: nvidia: module license 'NVIDIA' taints kernel. Aug 6 01:45:02 box kernel: ACPI: PCI Interrupt 0000:01:00.0[A] -> GSI 16 (level, low) -> IRQ 21 Aug 6 01:45:02 box kernel: NVRM: loading NVIDIA Linux x86 Kernel Module 1.0-8776 Mon Oct 16 21:56:04 PDT 2006 Aug 6 01:45:02 box kernel: agpgart: Found an AGP 3.0 compliant device at 0000:00:00.0. Aug 6 01:45:02 box kernel: agpgart: Device is in legacy mode, falling back to 2.x Aug 6 01:45:02 box kernel: agpgart: Putting AGP V2 device at 0000:00:00.0 into 4x mode Aug 6 01:45:02 box kernel: agpgart: Putting AGP V2 device at 0000:01:00.0 into 4x mode Aug 6 01:45:07 box gconfd (mythtv-3732): starting (version 2.16.0), pid 3732 user 'mythtv' Aug 6 01:45:07 box gconfd (mythtv-3732): Resolved address "xml:readonly:/etc/gconf/gconf.xml.mandatory" to a read-only configuration source at position 0 Aug 6 01:45:07 box gconfd (mythtv-3732): Resolved address "xml:readwrite:/home/mythtv/.gconf" to a writable configuration source at position 1 Aug 6 01:45:07 box gconfd (mythtv-3732): Resolved address "xml:readonly:/etc/gconf/gconf.xml.defaults" to a read-only configuration source at position 2 Aug 6 01:45:07 box gconfd (mythtv-3732): Resolved address "xml:readonly:/var/lib/gconf/debian.defaults" to a read-only configuration source at position 3 Aug 6 01:45:07 box gconfd (mythtv-3732): Resolved address "xml:readonly:/var/lib/gconf/defaults" to a read-only configuration source at position 4
|
|
Top |
|
![](images/spacer.gif) |
manicmike
|
Posted: Mon Aug 06, 2007 5:14 pm |
|
Joined: Sun Aug 28, 2005 7:07 pm
Posts: 821
Location:
Melbourne, Australia
|
First thing that springs to mind is that you have a log of the backend when it should never have started. You said it crashed at the start of the setup, so it shouldn't have started the backend at all.
It starts with no setup information (that line about the ip address error) since you have never completed the setup. What I think you should try next is to disable the backend prior to entering the setup's root password (alt-f2 will do it).
Also, have you tried an autoinstall with just the blank sata disk? If it goes well, you could easily restore the previous database manually from the old IDE disk.
Mike
_________________ ********************* LinHES 7.4 Australian Dragon *********************
|
|
Top |
|
![](images/spacer.gif) |
lhassell
|
Posted: Mon Aug 13, 2007 5:39 pm |
|
Joined: Wed Sep 27, 2006 4:47 pm
Posts: 46
|
Sorry I've taken so long on this... work is hell (but a 60 hour paycheck will be nice.)
Anyway, I've tried again installing to a 30 gig IDE drive with only that drive and my DVD-RW installed (thinking maybe the SATA drive may be part of the problem). After the install, I hit Alt-F2 to insure that the backend was down, and got partially through the startup install menus, but the machine is still freezing. I've found a couple of interesting entries in the log files, posted below.
from /var/log/kern.log
--------------------------------------------------------------------------------------
Aug 14 00:17:30 box kernel: Registering unionfs 20061031-1310
Aug 14 00:17:30 box kernel: unionfs: debugging is not enabled
Aug 14 00:17:30 box kernel: ACPI: Power Button (FF) [PWRF]
Aug 14 00:17:30 box kernel: ACPI: Power Button (CM) [PWRB]
Aug 14 00:17:30 box kernel: ACPI: Fan [FAN] (on)
Aug 14 00:17:30 box kernel: ACPI Exception (acpi_processor-0681): AE_NOT_FOUND, Processor Device is not present [20060707]
Aug 14 00:17:30 box kernel: ACPI: Getting cpuindex for acpiid 0x1
Aug 14 00:17:30 box kernel: ACPI: Thermal Zone [THRM] (40 C)
Aug 14 00:17:30 box kernel: fuse init (API version 7.7)
Aug 14 00:17:30 box kernel: NET: Registered protocol family 17
Aug 14 00:17:30 box kernel: NET: Registered protocol family 10
Aug 14 00:17:30 box kernel: lo: Disabled Privacy Extensions
Aug 14 00:17:30 box kernel: IPv6 over IPv4 tunneling driver
Aug 14 00:18:04 box kernel: nvidia: module license 'NVIDIA' taints kernel.
Aug 14 00:18:04 box kernel: ACPI: PCI Interrupt 0000:01:00.0[A] -> GSI 16 (level, low) -> IRQ 21
Aug 14 00:18:04 box kernel: NVRM: loading NVIDIA Linux x86 Kernel Module 1.0-8776 Mon Oct 16 21:56:04 PDT 2006
Aug 14 00:18:04 box kernel: agpgart: Found an AGP 3.0 compliant device at 0000:00:00.0.
Aug 14 00:18:04 box kernel: agpgart: Device is in legacy mode, falling back to 2.x
Aug 14 00:18:04 box kernel: agpgart: Putting AGP V2 device at 0000:00:00.0 into 4x mode
Aug 14 00:18:04 box kernel: agpgart: Putting AGP V2 device at 0000:01:00.0 into 4x mode
Aug 14 00:18:36 box kernel: eth0: link up, 100Mbps, full-duplex, lpa 0x41E1
Aug 14 00:18:37 box kernel: eth0: link up, 100Mbps, full-duplex, lpa 0x41E1
Aug 14 00:18:47 box kernel: NVRM: Xid (0001:00): 6, PE0000 169c ff7a979d 00000040 ff79969c ff73676b Aug 14 00:18:48 box kernel: eth0: no IPv6 routers present
--------------------------------------------------------------------------------------
from /var/log/syslog
--------------------------------------------------------------------------------------
Aug 14 00:18:37 box kernel: eth0: link up, 100Mbps, full-duplex, lpa 0x41E1
Aug 14 00:18:37 box pumpd[3886]: configured interface eth0
Aug 14 00:18:43 box ntpd[3923]: ntpd 4.2.2p4@1.1585-o Sat Oct 21 14:37:05 UTC 2006 (1)
Aug 14 00:18:43 box ntpd[3924]: precision = 1.000 usec
Aug 14 00:18:43 box ntpd[3924]: Listening on interface wildcard, 0.0.0.0#123 Disabled
Aug 14 00:18:43 box ntpd[3924]: Listening on interface wildcard, ::#123 Disabled
Aug 14 00:18:43 box ntpd[3924]: Listening on interface eth0, fe80::219:dbff:feac:ad3f#123 Enabled
Aug 14 00:18:43 box ntpd[3924]: Listening on interface lo, ::1#123 Enabled
Aug 14 00:18:43 box ntpd[3924]: Listening on interface eth0, 192.168.2.5#123 Enabled
Aug 14 00:18:43 box ntpd[3924]: Listening on interface lo, 127.0.0.1#123 Enabled
Aug 14 00:18:43 box ntpd[3924]: kernel time sync status 0040
Aug 14 00:18:43 box ntpd[3924]: frequency initialized 0.000 PPM from /var/lib/ntp/ntp.drift
Aug 14 00:18:47 box kernel: NVRM: Xid (0001:00): 6, PE0000 169c ff7a979d 00000040 ff79969c ff73676b
Aug 14 00:18:48 box kernel: eth0: no IPv6 routers present
Aug 13 16:18:52 box ntpd[3924]: synchronized to 192.36.143.150, stratum 1
Aug 13 16:18:52 box ntpd[3924]: time reset -28799.939948 s
Aug 13 16:18:52 box ntpd[3924]: kernel time sync enabled 0001
--------------------------------------------------------------------------------------
^--As near as I can tell, this seems to be the moment the machine froze.
Just to re-iterate, the motherboard, processor, memory, and power supply are brand new, so the problem should not be the hardware. The motherboard does say it has a VIA bios chip... would that make a difference?
Thanks
|
|
Top |
|
![](images/spacer.gif) |
cecil
|
Posted: Mon Aug 13, 2007 6:06 pm |
|
![Offline Offline](./styles/just_enjoy_LH/imageset/en/icon_user_offline.gif) |
Site Admin |
Joined: Fri Sep 19, 2003 6:37 pm
Posts: 2659
Location:
Whittier, Ca
|
lhassell wrote: Just to re-iterate, the motherboard, processor, memory, and power supply are brand new, so the problem should not be the hardware. The motherboard does say it has a VIA bios chip... would that make a difference? Does mean it is... I won't go over the saga that I had with 4 "new" Memorex DVD burners a few weeks ago. Via chipsets have been problematic in the past. However, I know of no issues w/ newer chipsets. I did see if you ran memtest overnight to test the new hardware...
|
|
Top |
|
![](images/spacer.gif) |
lhassell
|
Posted: Thu Aug 16, 2007 4:52 pm |
|
Joined: Wed Sep 27, 2006 4:47 pm
Posts: 46
|
Well... finally, I just swapped another mobo with my new one. I think it was a conflict with the onboard video card. It is up and running on the new hardware. thanks for the help.
|
|
Top |
|
![](images/spacer.gif) |
manicmike
|
Posted: Thu Aug 16, 2007 5:48 pm |
|
Joined: Sun Aug 28, 2005 7:07 pm
Posts: 821
Location:
Melbourne, Australia
|
lhassell wrote: Well... finally, I just swapped another mobo with my new one. I think it was a conflict with the onboard video card. It is up and running on the new hardware. thanks for the help.
You can nearly always disable the onboard video, if you still want to use it.
The CMOS settings will do this, and free up the memory, too.\
Mike
_________________ ********************* LinHES 7.4 Australian Dragon *********************
|
|
Top |
|
![](images/spacer.gif) |
lhassell
|
Posted: Thu Aug 16, 2007 6:37 pm |
|
Joined: Wed Sep 27, 2006 4:47 pm
Posts: 46
|
Well, at this point, I have it running on the new mobo, working well, (other than an issue with the remote) so there's no need to go fixing what isn't broken. luckily, I had mobos to swap.
Thanks for the help, at any rate.
Leif
|
|
Top |
|
![](images/spacer.gif) |