LinHES Forums http://forums.linhes.org/ |
|
LIRC configuration on new install w/ multiple receivers http://forums.linhes.org/viewtopic.php?f=1&t=18688 |
Page 1 of 1 |
Author: | jmckeown2 [ Sun Aug 03, 2008 10:08 am ] |
Post subject: | LIRC configuration on new install w/ multiple receivers |
I auto-installed R5.5 on an essentially new box. (2 PVR-150's and an iMON VFD were recycled from the previous incarnation.) One of the PVR-150s is the MCE flavor, ie with the MCE USB remote receiver; the iMON VFD also has a remote receiver. In the install it appears both remotes were detected and both klms are active: Code: $ lsmod | grep lirc
lirc_mod_mce 18948 1 lirc_imon 19080 1 lirc_dev 16132 2 lirc_mod_mce,lirc_imon usbcore 125448 11 usbhid,lirc_mod_mce,usb_storage,uhci_hcd,lirc_imon,ehci_hcd,ohci_hcd but the config files only seem to have one remote; the MCE. What I see as the "bug" here is that it configured the MCE remote, and pointed hardware.conf at /dev/lirc0, when the MCE was actually at /dev/lirc1. I'm not sure if there's anything worth fixing here, since I imagine 99.9% of users only have one remote receiver. -- Maybe a caveat in the install instructions; "If you're going to have more than one remote receiver, you may need to tweak the DEVICE= line in /etc/lirc/hardware.conf to point to the right device" I did have modified startup scripts that allowed me to use BOTH remotes at the same time, but I havn't gotten around to restoring them yet. If I'm wrong and there actually is interest in a multi-remote mythbox I can take notes during my re-setup, and provide details, and maybe a wiki article... |
Page 1 of 1 | All times are UTC - 6 hours |
Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |