View unanswered posts    View active topics

All times are UTC - 6 hours





Post new topic Reply to topic  [ 30 posts ] 
Go to page Previous  1, 2

Print view Previous topic   Next topic  
Author Message
Search for:
 Post subject: Conf and Log files
PostPosted: Mon Sep 08, 2008 6:36 pm 
Offline
Joined: Mon Jan 30, 2006 1:18 pm
Posts: 86
Location: Dayton, Ohio
Xorg.0.log:

[code]This is a pre-release version of the X server from The X.Org Foundation.
It is not supported in any way.
Bugs may be filed in the bugzilla at http://bugs.freedesktop.org/.
Select the "xorg" product for bugs you find in this release.
Before reporting bugs in pre-release versions please check the
latest version in the X.Org Foundation git repository.
See http://wiki.x.org/wiki/GitPage for git access instructions.

X.Org X Server 1.4.0.90
Release Date: 5 September 2007
X Protocol Version 11, Revision 0
Build Operating System: Linux Debian (xorg-server 2:1.4.1~git20080131-3)
Current Operating System: Linux mythtv 2.6.23-chw-4 #1 SMP PREEMPT Mon May 26 14:44:56 PDT 2008 i686
Build Date: 02 April 2008 01:11:22PM

Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
Module Loader present
Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Mon Sep 8 20:20:31 2008
(==) Using config file: "/etc/X11/xorg.conf"
(==) ServerLayout "XFree86 Configured"
(**) |-->Screen "Screen0" (0)
(**) | |-->Monitor "Monitor0"
(**) | |-->Device "Card0"
(**) |-->Input Device "Keyboard0"
(**) |-->Input Device "USB Mouse"
(**) Option "AllowMouseOpenFail" "true"
(==) Automatically adding devices
(==) Automatically enabling devices
(WW) The directory "/usr/share/fonts/X11/Speedo" does not exist.
Entry deleted from font path.
(WW) The directory "/usr/share/fonts/X11/PEX" does not exist.
Entry deleted from font path.
(WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist.
Entry deleted from font path.
(WW) The directory "/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType" does not exist.
Entry deleted from font path.
(WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/truetype".
Entry deleted from font path.
(Run 'mkfontdir' on "/usr/share/fonts/truetype").
(WW) The directory "/usr/share/fonts/latex-ttf-fonts" does not exist.
Entry deleted from font path.
(==) Including the default font path /usr/share/fonts/X11/misc,/usr/share/fonts/X11/cyrillic,/usr/share/fonts/X11/100dpi/:unscaled,/usr/share/fonts/X11/75dpi/:unscaled,/usr/share/fonts/X11/Type1,/usr/share/fonts/X11/100dpi,/usr/share/fonts/X11/75dpi,/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType.
(**) FontPath set to:
/usr/share/fonts/X11/misc:unscaled,
/usr/share/fonts/X11/75dpi:unscaled,
/usr/share/fonts/X11/100dpi:unscaled,
/usr/share/fonts/X11/Type1,
/usr/share/fonts/X11/misc,
/usr/share/fonts/X11/cyrillic,
/usr/share/fonts/X11/100dpi/:unscaled,
/usr/share/fonts/X11/75dpi/:unscaled,
/usr/share/fonts/X11/Type1,
/usr/share/fonts/X11/100dpi,
/usr/share/fonts/X11/75dpi,
/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType
(**) RgbPath set to "/usr/share/X11/rgb"
(**) ModulePath set to "/usr/lib/xorg/modules"
(WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
(II) No APM support in BIOS or kernel
(II) Loader magic: 0x81d9ec0
(II) Module ABI versions:
X.Org ANSI C Emulation: 0.3
X.Org Video Driver: 2.0
X.Org XInput driver : 2.0
X.Org Server Extension : 0.3
X.Org Font Renderer : 0.5
(II) Loader running on linux
(II) LoadModule: "pcidata"
(II) Loading /usr/lib/xorg/modules//libpcidata.so
(II) Module pcidata: vendor="X.Org Foundation"
compiled for 1.4.0.90, module version = 1.0.0
ABI class: X.Org Video Driver, version 2.0
(--) using VT number 7

(II) PCI: PCI scan (all values are in hex)
(II) PCI: 00:00:0: chip 10de,01e0 card 1043,80ac rev c1 class 06,00,00 hdr 80
(II) PCI: 00:00:1: chip 10de,01ea card 1043,80ac rev c1 class 05,00,00 hdr 80
(II) PCI: 00:00:2: chip 10de,01ee card 1043,80ac rev c1 class 05,00,00 hdr 80
(II) PCI: 00:00:3: chip 10de,01ed card 1043,80ac rev c1 class 05,00,00 hdr 80
(II) PCI: 00:00:4: chip 10de,01ec card 1043,80ac rev c1 class 05,00,00 hdr 80
(II) PCI: 00:00:5: chip 10de,01ef card 1043,80ac rev c1 class 05,00,00 hdr 80
(II) PCI: 00:01:0: chip 10de,0060 card 1043,80ad rev a4 class 06,01,00 hdr 80
(II) PCI: 00:01:1: chip 10de,0064 card 1043,0c11 rev a2 class 0c,05,00 hdr 80
(II) PCI: 00:02:0: chip 10de,0067 card 1043,0c11 rev a4 class 0c,03,10 hdr 80
(II) PCI: 00:02:1: chip 10de,0067 card 1043,0c11 rev a4 class 0c,03,10 hdr 80
(II) PCI: 00:02:2: chip 10de,0068 card 1043,0c11 rev a4 class 0c,03,20 hdr 80
(II) PCI: 00:04:0: chip 10de,0066 card 1043,80a7 rev a1 class 02,00,00 hdr 00
(II) PCI: 00:06:0: chip 10de,006a card 1043,8095 rev a1 class 04,01,00 hdr 00
(II) PCI: 00:08:0: chip 10de,006c card 0000,0000 rev a3 class 06,04,00 hdr 01
(II) PCI: 00:09:0: chip 10de,0065 card 1043,0c11 rev a2 class 01,01,8a hdr 00
(II) PCI: 00:1e:0: chip 10de,01e8 card 0000,0000 rev c1 class 06,04,00 hdr 01
(II) PCI: 01:07:0: chip 14f1,8800 card 18ac,d500 rev 05 class 04,00,00 hdr 80
(II) PCI: 01:07:1: chip 14f1,8811 card 18ac,d500 rev 05 class 04,80,00 hdr 80
(II) PCI: 01:07:2: chip 14f1,8802 card 18ac,d500 rev 05 class 04,80,00 hdr 80
(II) PCI: 02:00:0: chip 10de,0322 card 0000,0000 rev a1 class 03,00,00 hdr 00
(II) PCI: End of PCI scan
(II) Host-to-PCI bridge:
(II) Bus 0: bridge is at (0:0:0), (0,0,2), BCTRL: 0x0008 (VGA_EN is set)
(II) Bus 0 I/O range:
[0] -1 0 0x00000000 - 0x0000ffff (0x10000) IX[B]
(II) Bus 0 non-prefetchable memory range:
[0] -1 0 0x00000000 - 0xffffffff (0x0) MX[B]
(II) Bus 0 prefetchable memory range:
[0] -1 0 0x00000000 - 0xffffffff (0x0) MX[B]
(II) PCI-to-ISA bridge:
(II) Bus -1: bridge is at (0:1:0), (0,-1,-1), BCTRL: 0x0008 (VGA_EN is set)
(II) PCI-to-PCI bridge:
(II) Bus 1: bridge is at (0:8:0), (0,1,1), BCTRL: 0x0202 (VGA_EN is cleared)
(II) Bus 1 non-prefetchable memory range:
[0] -1 0 0xde000000 - 0xe0ffffff (0x3000000) MX[B]
(II) PCI-to-PCI bridge:
(II) Bus 2: bridge is at (0:30:0), (0,2,2), BCTRL: 0x000a (VGA_EN is set)
(II) Bus 2 non-prefetchable memory range:
[0] -1 0 0xdc000000 - 0xddffffff (0x2000000) MX[B]
(II) Bus 2 prefetchable memory range:
[0] -1 0 0xd0000000 - 0xd7ffffff (0x8000000) MX[B]
(--) PCI: (1:7:0) unknown vendor (0x14f1) unknown chipset (0x8800) rev 5, Mem @ 0xde000000/24
(--) PCI:*(2:0:0) nVidia Corporation NV34 [GeForce FX 5200] rev 161, Mem @ 0xdc000000/24, 0xd0000000/27
(II) Addressable bus resource ranges are
[0] -1 0 0x00000000 - 0xffffffff (0x0) MX[B]
[1] -1 0 0x00000000 - 0x0000ffff (0x10000) IX[B]
(II) OS-reported resource ranges:
[0] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[4] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[5] -1 0 0x00000000 - 0x000000ff (0x100) IX[B]
(II) PCI Memory resource overlap reduced 0xd8000000 from 0xdbffffff to 0xd7ffffff
(II) Active PCI resource ranges:
[0] -1 0 0xe0000000 - 0xe0ffffff (0x1000000) MX[B]
[1] -1 0 0xdf000000 - 0xdfffffff (0x1000000) MX[B]
[2] -1 0 0xe1001000 - 0xe1001fff (0x1000) MX[B]
[3] -1 0 0xe1000000 - 0xe1000fff (0x1000) MX[B]
[4] -1 0 0xe1005000 - 0xe10050ff (0x100) MX[B]
[5] -1 0 0xe1004000 - 0xe1004fff (0x1000) MX[B]
[6] -1 0 0xe1003000 - 0xe1003fff (0x1000) MX[B]
[7] -1 0 0xd8000000 - 0xd7ffffff (0x0) MX[B]O
[8] -1 0 0xd0000000 - 0xd7ffffff (0x8000000) MX[B](B)
[9] -1 0 0xdc000000 - 0xdcffffff (0x1000000) MX[B](B)
[10] -1 0 0xde000000 - 0xdeffffff (0x1000000) MX[B](B)
[11] -1 0 0x0000f000 - 0x0000f00f (0x10) IX[B]
[12] -1 0 0x0000dc00 - 0x0000dc7f (0x80) IX[B]
[13] -1 0 0x0000d800 - 0x0000d8ff (0x100) IX[B]
[14] -1 0 0x0000d400 - 0x0000d407 (0x8) IX[B]
[15] -1 0 0x0000d000 - 0x0000d01f (0x20) IX[B]
(II) Active PCI resource ranges after removing overlaps:
[0] -1 0 0xe0000000 - 0xe0ffffff (0x1000000) MX[B]
[1] -1 0 0xdf000000 - 0xdfffffff (0x1000000) MX[B]
[2] -1 0 0xe1001000 - 0xe1001fff (0x1000) MX[B]
[3] -1 0 0xe1000000 - 0xe1000fff (0x1000) MX[B]
[4] -1 0 0xe1005000 - 0xe10050ff (0x100) MX[B]
[5] -1 0 0xe1004000 - 0xe1004fff (0x1000) MX[B]
[6] -1 0 0xe1003000 - 0xe1003fff (0x1000) MX[B]
[7] -1 0 0xd8000000 - 0xd7ffffff (0x0) MX[B]O
[8] -1 0 0xd0000000 - 0xd7ffffff (0x8000000) MX[B](B)
[9] -1 0 0xdc000000 - 0xdcffffff (0x1000000) MX[B](B)
[10] -1 0 0xde000000 - 0xdeffffff (0x1000000) MX[B](B)
[11] -1 0 0x0000f000 - 0x0000f00f (0x10) IX[B]
[12] -1 0 0x0000dc00 - 0x0000dc7f (0x80) IX[B]
[13] -1 0 0x0000d800 - 0x0000d8ff (0x100) IX[B]
[14] -1 0 0x0000d400 - 0x0000d407 (0x8) IX[B]
[15] -1 0 0x0000d000 - 0x0000d01f (0x20) IX[B]
(II) OS-reported resource ranges after removing overlaps with PCI:
[0] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[4] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[5] -1 0 0x00000000 - 0x000000ff (0x100) IX[B]
(II) All system resource ranges:
[0] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[4] -1 0 0xe0000000 - 0xe0ffffff (0x1000000) MX[B]
[5] -1 0 0xdf000000 - 0xdfffffff (0x1000000) MX[B]
[6] -1 0 0xe1001000 - 0xe1001fff (0x1000) MX[B]
[7] -1 0 0xe1000000 - 0xe1000fff (0x1000) MX[B]
[8] -1 0 0xe1005000 - 0xe10050ff (0x100) MX[B]
[9] -1 0 0xe1004000 - 0xe1004fff (0x1000) MX[B]
[10] -1 0 0xe1003000 - 0xe1003fff (0x1000) MX[B]
[11] -1 0 0xd8000000 - 0xd7ffffff (0x0) MX[B]O
[12] -1 0 0xd0000000 - 0xd7ffffff (0x8000000) MX[B](B)
[13] -1 0 0xdc000000 - 0xdcffffff (0x1000000) MX[B](B)
[14] -1 0 0xde000000 - 0xdeffffff (0x1000000) MX[B](B)
[15] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[16] -1 0 0x00000000 - 0x000000ff (0x100) IX[B]
[17] -1 0 0x0000f000 - 0x0000f00f (0x10) IX[B]
[18] -1 0 0x0000dc00 - 0x0000dc7f (0x80) IX[B]
[19] -1 0 0x0000d800 - 0x0000d8ff (0x100) IX[B]
[20] -1 0 0x0000d400 - 0x0000d407 (0x8) IX[B]
[21] -1 0 0x0000d000 - 0x0000d01f (0x20) IX[B]
(II) "extmod" will be loaded. This was enabled by default and also specified in the config file.
(II) "dbe" will be loaded. This was enabled by default and also specified in the config file.
(II) "glx" will be loaded. This was enabled by default and also specified in the config file.
(II) "freetype" will be loaded. This was enabled by default and also specified in the config file.
(II) "record" will be loaded. This was enabled by default and also specified in the config file.
(II) "dri" will be loaded by default.
(II) LoadModule: "dbe"
(II) Loading /usr/lib/xorg/modules/extensions//libdbe.so
(II) Module dbe: vendor="X.Org Foundation"
compiled for 1.4.0.90, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 0.3
(II) Loading extension DOUBLE-BUFFER
(II) LoadModule: "glx"
(II) Loading /usr/lib/xorg/modules/extensions//libglx.so
(II) Module glx: vendor="NVIDIA Corporation"
compiled for 4.0.2, module version = 1.0.0
Module class: X.Org Server Extension
(II) NVIDIA GLX Module 173.14.09 Thu Jun 5 00:07:40 PDT 2008
(II) Loading extension GLX
(II) LoadModule: "freetype"
(II) Loading /usr/lib/xorg/modules//fonts/libfreetype.so
(II) Module freetype: vendor="X.Org Foundation & the After X-TT Project"
compiled for 1.4.0.90, module version = 2.1.0
Module class: X.Org Font Renderer
ABI class: X.Org Font Renderer, version 0.5
(II) Loading font FreeType
(II) LoadModule: "type1"
(WW) Warning, couldn't open module type1
(II) UnloadModule: "type1"
(EE) Failed to load module "type1" (module does not exist, 0)
(II) LoadModule: "record"
(II) Loading /usr/lib/xorg/modules/extensions//librecord.so
(II) Module record: vendor="X.Org Foundation"
compiled for 1.4.0.90, module version = 1.13.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 0.3
(II) Loading extension RECORD
(II) LoadModule: "extmod"
(II) Loading /usr/lib/xorg/modules/extensions//libextmod.so
(II) Module extmod: vendor="X.Org Foundation"
compiled for 1.4.0.90, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 0.3
(II) Loading extension SHAPE
(II) Loading extension MIT-SUNDRY-NONSTANDARD
(II) Loading extension BIG-REQUESTS
(II) Loading extension SYNC
(II) Loading extension MIT-SCREEN-SAVER
(II) Loading extension XC-MISC
(II) Loading extension XFree86-VidModeExtension
(II) Loading extension XFree86-Misc
(II) Loading extension DPMS
(II) Loading extension TOG-CUP
(II) Loading extension Extended-Visual-Information
(II) Loading extension XVideo
(II) Loading extension XVideo-MotionCompensation
(II) Loading extension X-Resource
(II) LoadModule: "dri"
(II) Loading /usr/lib/xorg/modules/extensions//libdri.so
(II) Module dri: vendor="X.Org Foundation"
compiled for 1.4.0.90, module version = 1.0.0
ABI class: X.Org Server Extension, version 0.3
(II) Loading extension XFree86-DRI
(II) LoadModule: "nvidia"
(II) Loading /usr/lib/xorg/modules/drivers//nvidia_drv.so
(II) Module nvidia: vendor="NVIDIA Corporation"
compiled for 4.0.2, module version = 1.0.0
Module class: X.Org Video Driver
(II) LoadModule: "kbd"
(II) Loading /usr/lib/xorg/modules/input//kbd_drv.so
(II) Module kbd: vendor="X.Org Foundation"
compiled for 1.4.0, module version = 1.2.2
Module class: X.Org XInput Driver
ABI class: X.Org XInput driver, version 2.0
(II) LoadModule: "mouse"
(II) Loading /usr/lib/xorg/modules/input//mouse_drv.so
(II) Module mouse: vendor="X.Org Foundation"
compiled for 1.4.0, module version = 1.2.2
Module class: X.Org XInput Driver
ABI class: X.Org XInput driver, version 2.0
(II) NVIDIA dlloader X Driver 173.14.09 Wed Jun 4 23:47:25 PDT 2008
(II) NVIDIA Unified Driver for all Supported NVIDIA GPUs
(II) Primary Device is: PCI 02:00:0
(--) Assigning device section with no busID to primary device
(--) Chipset NVIDIA GPU found
(II) NVIDIA(0): Found 1 NVIDIA X Screens
(II) Loading sub module "fb"
(II) LoadModule: "fb"
(II) Loading /usr/lib/xorg/modules//libfb.so
(II) Module fb: vendor="X.Org Foundation"
compiled for 1.4.0.90, module version = 1.0.0
ABI class: X.Org ANSI C Emulation, version 0.3
(II) Loading sub module "wfb"
(II) LoadModule: "wfb"
(II) Loading /usr/lib/xorg/modules//libwfb.so
(II) Module wfb: vendor="X.Org Foundation"
compiled for 1.4.0.90, module version = 1.0.0
ABI class: X.Org ANSI C Emulation, version 0.3
(II) Loading sub module "ramdac"
(II) LoadModule: "ramdac"(II) Module "ramdac" already built-in
(II) resource ranges after xf86ClaimFixedResources() call:
[0] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[4] -1 0 0xe0000000 - 0xe0ffffff (0x1000000) MX[B]
[5] -1 0 0xdf000000 - 0xdfffffff (0x1000000) MX[B]
[6] -1 0 0xe1001000 - 0xe1001fff (0x1000) MX[B]
[7] -1 0 0xe1000000 - 0xe1000fff (0x1000) MX[B]
[8] -1 0 0xe1005000 - 0xe10050ff (0x100) MX[B]
[9] -1 0 0xe1004000 - 0xe1004fff (0x1000) MX[B]
[10] -1 0 0xe1003000 - 0xe1003fff (0x1000) MX[B]
[11] -1 0 0xd8000000 - 0xd7ffffff (0x0) MX[B]O
[12] -1 0 0xd0000000 - 0xd7ffffff (0x8000000) MX[B](B)
[13] -1 0 0xdc000000 - 0xdcffffff (0x1000000) MX[B](B)
[14] -1 0 0xde000000 - 0xdeffffff (0x1000000) MX[B](B)
[15] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[16] -1 0 0x00000000 - 0x000000ff (0x100) IX[B]
[17] -1 0 0x0000f000 - 0x0000f00f (0x10) IX[B]
[18] -1 0 0x0000dc00 - 0x0000dc7f (0x80) IX[B]
[19] -1 0 0x0000d800 - 0x0000d8ff (0x100) IX[B]
[20] -1 0 0x0000d400 - 0x0000d407 (0x8) IX[B]
[21] -1 0 0x0000d000 - 0x0000d01f (0x20) IX[B]
(II) resource ranges after probing:
[0] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[4] -1 0 0xe0000000 - 0xe0ffffff (0x1000000) MX[B]
[5] -1 0 0xdf000000 - 0xdfffffff (0x1000000) MX[B]
[6] -1 0 0xe1001000 - 0xe1001fff (0x1000) MX[B]
[7] -1 0 0xe1000000 - 0xe1000fff (0x1000) MX[B]
[8] -1 0 0xe1005000 - 0xe10050ff (0x100) MX[B]
[9] -1 0 0xe1004000 - 0xe1004fff (0x1000) MX[B]
[10] -1 0 0xe1003000 - 0xe1003fff (0x1000) MX[B]
[11] -1 0 0xd8000000 - 0xd7ffffff (0x0) MX[B]O
[12] -1 0 0xd0000000 - 0xd7ffffff (0x8000000) MX[B](B)
[13] -1 0 0xdc000000 - 0xdcffffff (0x1000000) MX[B](B)
[14] -1 0 0xde000000 - 0xdeffffff (0x1000000) MX[B](B)
[15] 0 0 0x000a0000 - 0x000affff (0x10000) MS[B]
[16] 0 0 0x000b0000 - 0x000b7fff (0x8000) MS[B]
[17] 0 0 0x000b8000 - 0x000bffff (0x8000) MS[B]
[18] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[19] -1 0 0x00000000 - 0x000000ff (0x100) IX[B]
[20] -1 0 0x0000f000 - 0x0000f00f (0x10) IX[B]
[21] -1 0 0x0000dc00 - 0x0000dc7f (0x80) IX[B]
[22] -1 0 0x0000d800 - 0x0000d8ff (0x100) IX[B]
[23] -1 0 0x0000d400 - 0x0000d407 (0x8) IX[B]
[24] -1 0 0x0000d000 - 0x0000d01f (0x20) IX[B]
[25] 0 0 0x000003b0 - 0x000003bb (0xc) IS[B]
[26] 0 0 0x000003c0 - 0x000003df (0x20) IS[B]
(II) Setting vga for screen 0.
(**) NVIDIA(0): Depth 24, (--) framebuffer bpp 32
(==) NVIDIA(0): RGB weight 888
(==) NVIDIA(0): Default visual is TrueColor
(==) NVIDIA(0): Using gamma correction (1.0, 1.0, 1.0)
(**) NVIDIA(0): Option "XvMCUsesTextures" "false"
(**) NVIDIA(0): Option "UseEdidDpi" "FALSE"
(**) NVIDIA(0): Option "DPI" "100 x 100"
(**) NVIDIA(0): Option "UseEvents" "true"
(==) NVIDIA(0): Using HW cursor
(**) NVIDIA(0): Enabling RENDER acceleration
(==) NVIDIA(0): Video key set to default value of 0x101fe
(II) NVIDIA(0): Support for GLX with the Damage and Composite X extensions is
(II) NVIDIA(0): enabled.
(II) NVIDIA(0): NVIDIA GPU GeForce FX 5200 (NV34) at PCI:2:0:0 (GPU-0)
(--) NVIDIA(0): Memory: 131072 kBytes
(II) NVIDIA(0): GPU RAM Type: DDR1
(--) NVIDIA(0): VideoBIOS: 04.34.20.23.aa
(--) NVIDIA(0): Found 2 CRTCs on board
(II) NVIDIA(0): Supported display device(s): CRT-0, CRT-1, DFP-0, TV-0
(II) NVIDIA(0): Bus detected as AGP
(II) NVIDIA(0): Detected AGP rate: 8X
(--) NVIDIA(0): Interlaced video modes are supported on this GPU
(II) NVIDIA(0):
(II) NVIDIA(0): Mode timing constraints for : GeForce FX 5200
(II) NVIDIA(0): Maximum mode timing values :
(II) NVIDIA(0): Horizontal Visible Width : 8192
(II) NVIDIA(0): Horizontal Blank Start : 8192
(II) NVIDIA(0): Horizontal Blank Width : 4096
(II) NVIDIA(0): Horizontal Sync Start : 8184
(II) NVIDIA(0): Horizontal Sync Width : 504
(II) NVIDIA(0): Horizontal Total Width : 8224
(II) NVIDIA(0): Vertical Visible Height : 8192
(II) NVIDIA(0): Vertical Blank Start : 8192
(II) NVIDIA(0): Vertical Blank Width : 256
(II) NVIDIA(0): Veritcal Sync Start : 8191
(II) NVIDIA(0): Vertical Sync Width : 15
(II) NVIDIA(0): Vertical Total Height : 8193
(II) NVIDIA(0):
(II) NVIDIA(0): Minimum mode timing values :
(II) NVIDIA(0): Horizontal Total Width : 40
(II) NVIDIA(0): Vertical Total Height : 2
(II) NVIDIA(0):
(II) NVIDIA(0): Mode timing alignment :
(II) NVIDIA(0): Horizontal Visible Width : multiples of 8
(II) NVIDIA(0): Horizontal Blank Start : multiples of 8
(II) NVIDIA(0): Horizontal Blank Width : multiples of 8
(II) NVIDIA(0): Horizontal Sync Start : multiples of 8
(II) NVIDIA(0): Horizontal Sync Width : multiples of 8
(II) NVIDIA(0): Horizontal Total Width : multiples of 8
(II) NVIDIA(0):
(--) NVIDIA(0): Connected display device(s) on GeForce FX 5200 at PCI:2:0:0:
(--) NVIDIA(0): AOC F1950iLCD Display (DFP-0)
(--) NVIDIA(0): AOC F1950iLCD Display (DFP-0): 135.0 MHz maximum pixel clock
(--) NVIDIA(0): AOC F1950iLCD Display (DFP-0): Internal Single Link TMDS
(--) NVIDIA(0): AOC F1950iLCD Display (DFP-0): Native FlatPanel Scaling is
(--) NVIDIA(0): supported
(--) NVIDIA(0): AOC F1950iLCD Display (DFP-0): DFP modes are limited to 60 Hz
(--) NVIDIA(0): refresh rate
(--) NVIDIA(0): AOC F1950iLCD Display (DFP-0): DFP is not internal to
(--) NVIDIA(0): notebook
(--) NVIDIA(0):
(--) NVIDIA(0): --- EDID for AOC F1950iLCD Display (DFP-0) ---
(--) NVIDIA(0): EDID Version : 1.3
(--) NVIDIA(0): Manufacturer : AOC
(--) NVIDIA(0): Monitor Name : AOC F1950iLCD Display
(--) NVIDIA(0): Product ID : 61950
(--) NVIDIA(0): 32-bit Serial Number : 301
(--) NVIDIA(0): Serial Number String :
(--) NVIDIA(0): Manufacture Date : 2005, week 24
(--) NVIDIA(0): DPMS Capabilities : Active Off
(--) NVIDIA(0): Prefer first detailed timing : Yes
(--) NVIDIA(0): Supports GTF : No
(--) NVIDIA(0): Maximum Image Size : 380mm x 300mm
(--) NVIDIA(0): Valid HSync Range : 30.0 kHz - 83.0 kHz
(--) NVIDIA(0): Valid VRefresh Range : 55 Hz - 75 Hz
(--) NVIDIA(0): EDID maximum pixel clock : 140.0 MHz
(--) NVIDIA(0):
(--) NVIDIA(0): Established Timings:
(--) NVIDIA(0): 640 x 480 @ 60 Hz
(--) NVIDIA(0): 640 x 480 @ 72 Hz
(--) NVIDIA(0): 640 x 480 @ 75 Hz
(--) NVIDIA(0): 800 x 600 @ 56 Hz
(--) NVIDIA(0): 800 x 600 @ 60 Hz
(--) NVIDIA(0): 800 x 600 @ 72 Hz
(--) NVIDIA(0): 800 x 600 @ 75 Hz
(--) NVIDIA(0): 1024 x 768 @ 60 Hz
(--) NVIDIA(0): 1024 x 768 @ 70 Hz
(--) NVIDIA(0): 1024 x 768 @ 75 Hz
(--) NVIDIA(0): 1280 x 1024 @ 75 Hz
(--) NVIDIA(0):
(--) NVIDIA(0): Detailed Timings:
(--) NVIDIA(0): 1280 x 1024 @ 60 Hz
(--) NVIDIA(0): Pixel Clock : 108.00 MHz
(--) NVIDIA(0): HRes, HSyncStart : 1280, 1328
(--) NVIDIA(0): HSyncEnd, HTotal : 1440, 1688
(--) NVIDIA(0): VRes, VSyncStart : 1024, 1025
(--) NVIDIA(0): VSyncEnd, VTotal : 1028, 1066
(--) NVIDIA(0): H/V Polarity : +/+
(--) NVIDIA(0):
(--) NVIDIA(0):
(--) NVIDIA(0): Raw EDID bytes:
(--) NVIDIA(0):
(--) NVIDIA(0): 00 ff ff ff ff ff ff 00 05 e3 fe f1 2d 01 00 00
(--) NVIDIA(0): 18 0f 01 03 80 26 1e 78 2a ac 45 a5 53 4a 9d 24
(--) NVIDIA(0): 14 4f 54 bf ef 00 81 80 01 01 01 01 01 01 01 01
(--) NVIDIA(0): 01 01 01 01 01 01 30 2a 00 98 51 00 2a 40 30 70
(--) NVIDIA(0): 13 00 78 2d 11 00 00 1e 00 00 00 fc 00 46 31 39
(--) NVIDIA(0): 35 30 69 20 0a 20 20 20 20 20 00 00 00 fc 00 4c
(--) NVIDIA(0): 43 44 20 44 69 73 70 6c 61 79 0a 20 00 00 00 fd
(--) NVIDIA(0): 00 37 4b 1e 53 0e 00 0a 20 20 20 20 20 20 00 d9
(--) NVIDIA(0):
(--) NVIDIA(0): --- End of EDID for AOC F1950iLCD Display (DFP-0) ---
(--) NVIDIA(0):
(II) NVIDIA(0): Frequency information for AOC F1950iLCD Display (DFP-0):
(II) NVIDIA(0): HorizSync : 30.000-83.000 kHz
(II) NVIDIA(0): VertRefresh : 55.000-75.000 Hz
(II) NVIDIA(0): (HorizSync from EDID)
(II) NVIDIA(0): (VertRefresh from EDID)
(II) NVIDIA(0):
(II) NVIDIA(0): --- Building ModePool for AOC F1950iLCD Display (DFP-0) ---
(II) NVIDIA(0): Validating Mode "1280x1024":
(II) NVIDIA(0): 1280 x 1024 @ 60 Hz
(II) NVIDIA(0): For use as DFP backend.
(II) NVIDIA(0): Mode Source: EDID
(II) NVIDIA(0): Pixel Clock : 108.00 MHz
(II) NVIDIA(0): HRes, HSyncStart : 1280, 1328
(II) NVIDIA(0): HSyncEnd, HTotal : 1440, 1688
(II) NVIDIA(0): VRes, VSyncStart : 1024, 1025
(II) NVIDIA(0): VSyncEnd, VTotal : 1028, 1066
(II) NVIDIA(0): H/V Polarity : +/+
(II) NVIDIA(0): Mode is valid.
(II) NVIDIA(0):
(II) NVIDIA(0): Validating Mode "640x480":
(II) NVIDIA(0): 640 x 480 @ 60 Hz
(II) NVIDIA(0): For use as DFP backend.
(II) NVIDIA(0): Mode Source: EDID
(II) NVIDIA(0): Pixel Clock : 25.18 MHz
(II) NVIDIA(0): HRes, HSyncStart : 640, 656
(II) NVIDIA(0): HSyncEnd, HTotal : 752, 800
(II) NVIDIA(0): VRes, VSyncStart : 480, 490
(II) NVIDIA(0): VSyncEnd, VTotal : 492, 525
(II) NVIDIA(0): H/V Polarity : -/-
(II) NVIDIA(0): Mode is valid.
(II) NVIDIA(0):
(II) NVIDIA(0): Validating Mode "640x480":
(II) NVIDIA(0): 640 x 480 @ 73 Hz
(II) NVIDIA(0): For use as DFP backend.
(II) NVIDIA(0): Mode Source: EDID
(II) NVIDIA(0): Pixel Clock : 31.50 MHz
(II) NVIDIA(0): HRes, HSyncStart : 640, 664
(II) NVIDIA(0): HSyncEnd, HTotal : 704, 832
(II) NVIDIA(0): VRes, VSyncStart : 480, 489
(II) NVIDIA(0): VSyncEnd, VTotal : 492, 520
(II) NVIDIA(0): H/V Polarity : -/-
(WW) NVIDIA(0): Mode is rejected: Only 60 Hz VertRefresh modes are allowed
(WW) NVIDIA(0): for this TMDS encoder; this mode had VertRefresh 72.8 Hz.
(II) NVIDIA(0):
(II) NVIDIA(0): Validating Mode "640x480":
(II) NVIDIA(0): 640 x 480 @ 75 Hz
(II) NVIDIA(0): For use as DFP backend.
(II) NVIDIA(0): Mode Source: EDID
(II) NVIDIA(0): Pixel Clock : 31.50 MHz
(II) NVIDIA(0): HRes, HSyncStart : 640, 656
(II) NVIDIA(0): HSyncEnd, HTotal : 720, 840
(II) NVIDIA(0): VRes, VSyncStart : 480, 481
(II) NVIDIA(0): VSyncEnd, VTotal : 484, 500
(II) NVIDIA(0): H/V Polarity : -/-
(WW) NVIDIA(0): Mode is rejected: Only 60 Hz VertRefresh modes are allowed
(WW) NVIDIA(0): for this TMDS encoder; this mode had VertRefresh 75.0 Hz.
(II) NVIDIA(0):
(II) NVIDIA(0): Validating Mode "800x600":
(II) NVIDIA(0): 800 x 600 @ 56 Hz
(II) NVIDIA(0): For use as DFP backend.
(II) NVIDIA(0): Mode Source: EDID
(II) NVIDIA(0): Pixel Clock : 36.00 MHz
(II) NVIDIA(0): HRes, HSyncStart : 800, 824
(II) NVIDIA(0): HSyncEnd, HTotal : 896, 1024
(II) NVIDIA(0): VRes, VSyncStart : 600, 601
(II) NVIDIA(0): VSyncEnd, VTotal : 603, 625
(II) NVIDIA(0): H/V Polarity : +/+
(WW) NVIDIA(0): Mode is rejected: Only 60 Hz VertRefresh modes are allowed
(WW) NVIDIA(0): for this TMDS encoder; this mode had VertRefresh 56.2 Hz.
(II) NVIDIA(0):
(II) NVIDIA(0): Validating Mode "800x600":
(II) NVIDIA(0): 800 x 600 @ 60 Hz
(II) NVIDIA(0): For use as DFP backend.
(II) NVIDIA(0): Mode Source: EDID
(II) NVIDIA(0): Pixel Clock : 40.00 MHz
(II) NVIDIA(0): HRes, HSyncStart : 800, 840
(II) NVIDIA(0): HSyncEnd, HTotal : 968, 1056
(II) NVIDIA(0): VRes, VSyncStart : 600, 601
(II) NVIDIA(0): VSyncEnd, VTotal : 605, 628
(II) NVIDIA(0): H/V Polarity : +/+
(II) NVIDIA(0): Mode is valid.
(II) NVIDIA(0):
(II) NVIDIA(0): Validating Mode "800x600":
(II) NVIDIA(0): 800 x 600 @ 72 Hz
(II) NVIDIA(0): For use as DFP backend.
(II) NVIDIA(0): Mode Source: EDID
(II) NVIDIA(0): Pixel Clock : 50.00 MHz
(II) NVIDIA(0): HRes, HSyncStart : 800, 856
(II) NVIDIA(0): HSyncEnd, HTotal : 976, 1040
(II) NVIDIA(0): VRes, VSyncStart : 600, 637
(II) NVIDIA(0): VSyncEnd, VTotal : 643, 666
(II) NVIDIA(0): H/V Polarity : +/+
(WW) NVIDIA(0): Mode is rejected: Only 60 Hz VertRefresh modes are allowed
(WW) NVIDIA(0): for this TMDS encoder; this mode had VertRefresh 72.2 Hz.
(II) NVIDIA(0):
(II) NVIDIA(0): Validating Mode "800x600":
(II) NVIDIA(0): 800 x 600 @ 75 Hz
(II) NVIDIA(0): For use as DFP backend.
(II) NVIDIA(0): Mode Source: EDID
(II) NVIDIA(0): Pixel Clock : 49.50 MHz
(II) NVIDIA(0): HRes, HSyncStart : 800, 816
(II) NVIDIA(0): HSyncEnd, HTotal : 896, 1056
(II) NVIDIA(0): VRes, VSyncStart : 600, 601
(II) NVIDIA(0): VSyncEnd, VTotal : 604, 625
(II) NVIDIA(0): H/V Polarity : +/+
(WW) NVIDIA(0): Mode is rejected: Only 60 Hz VertRefresh modes are allowed
(WW) NVIDIA(0): for this TMDS encoder; this mode had VertRefresh 75.0 Hz.
(II) NVIDIA(0):
(II) NVIDIA(0): Validating Mode "1024x768":
(II) NVIDIA(0): 1024 x 768 @ 60 Hz
(II) NVIDIA(0): For use as DFP backend.
(II) NVIDIA(0): Mode Source: EDID
(II) NVIDIA(0): Pixel Clock : 65.00 MHz
(II) NVIDIA(0): HRes, HSyncStart : 1024, 1048
(II) NVIDIA(0): HSyncEnd, HTotal : 1184, 1344
(II) NVIDIA(0): VRes, VSyncStart : 768, 771
(II) NVIDIA(0): VSyncEnd, VTotal : 777, 806
(II) NVIDIA(0): H/V Polarity : -/-
(II) NVIDIA(0): Mode is valid.
(II) NVIDIA(0):
(II) NVIDIA(0): Validating Mode "1024x768":
(II) NVIDIA(0): 1024 x 768 @ 70 Hz
(II) NVIDIA(0): For use as DFP backend.
(II) NVIDIA(0): Mode Source: EDID
(II) NVIDIA(0): Pixel Clock : 75.00 MHz
(II) NVIDIA(0): HRes, HSyncStart : 1024, 1048
(II) NVIDIA(0): HSyncEnd, HTotal : 1184, 1328
(II) NVIDIA(0): VRes, VSyncStart : 768, 771
(II) NVIDIA(0): VSyncEnd, VTotal : 777, 806
(II) NVIDIA(0): H/V Polarity : -/-
(WW) NVIDIA(0): Mode is rejected: Only 60 Hz VertRefresh modes are allowed
(WW) NVIDIA(0): for this TMDS encoder; this mode had VertRefresh 70.1 Hz.
(II) NVIDIA(0):
(II) NVIDIA(0): Validating Mode "1024x768":
(II) NVIDIA(0): 1024 x 768 @ 75 Hz
(II) NVIDIA(0): For use as DFP backend.
(II) NVIDIA(0): Mode Source: EDID
(II) NVIDIA(0): Pixel Clock : 78.75 MHz
(II) NVIDIA(0): HRes, HSyncStart : 1024, 1040
(II) NVIDIA(0): HSyncEnd, HTotal : 1136, 1312
(II) NVIDIA(0): VRes, VSyncStart : 768, 769
(II) NVIDIA(0): VSyncEnd, VTotal : 772, 800
(II) NVIDIA(0): H/V Polarity : +/+
(WW) NVIDIA(0): Mode is rejected: Only 60 Hz VertRefresh modes are allowed
(WW) NVIDIA(0): for this TMDS encoder; this mode had VertRefresh 75.0 Hz.
(II) NVIDIA(0):
(II) NVIDIA(0): Validating Mode "1280x1024":
(II) NVIDIA(0): 1280 x 1024 @ 75 Hz
(II) NVIDIA(0): For use as DFP backend.
(II) NVIDIA(0): Mode Source: EDID
(II) NVIDIA(0): Pixel Clock : 135.00 MHz
(II) NVIDIA(0): HRes, HSyncStart : 1280, 1296
(II) NVIDIA(0): HSyncEnd, HTotal : 1440, 1688
(II) NVIDIA(0): VRes, VSyncStart : 1024, 1025
(II) NVIDIA(0): VSyncEnd, VTotal : 1028, 1066
(II) NVIDIA(0): H/V Polarity : +/+
(WW) NVIDIA(0): Mode is rejected: Only 60 Hz VertRefresh modes are allowed
(WW) NVIDIA(0): for this TMDS encoder; this mode had VertRefresh 75.0 Hz.
(II) NVIDIA(0):
(II) NVIDIA(0):
(II) NVIDIA(0): Native backend timings for AOC F1950iLCD Display (DFP-0):
(II) NVIDIA(0): 1280 x 1024 @ 60 Hz
(II) NVIDIA(0): Pixel Clock : 108.000 MHz
(II) NVIDIA(0): HRes, HSyncStart : 1280, 1328
(II) NVIDIA(0): HSyncEnd, HTotal : 1440, 1688
(II) NVIDIA(0): VRes, VSyncStart : 1024, 1025
(II) NVIDIA(0): VSyncEnd, VTotal : 1028, 1066
(II) NVIDIA(0): H/V Polarity : +/+
(II) NVIDIA(0):
(II) NVIDIA(0): Validating Mode "1280x1024":
(II) NVIDIA(0): 1280 x 1024 @ 60 Hz
(II) NVIDIA(0): Mode Source: EDID
(II) NVIDIA(0): Pixel Clock : 108.00 MHz
(II) NVIDIA(0): HRes, HSyncStart : 1280, 1328
(II) NVIDIA(0): HSyncEnd, HTotal : 1440, 1688
(II) NVIDIA(0): VRes, VSyncStart : 1024, 1025
(II) NVIDIA(0): VSyncEnd, VTotal : 1028, 1066
(II) NVIDIA(0): H/V Polarity : +/+
(II) NVIDIA(0): Mode is valid.
(II) NVIDIA(0):
(II) NVIDIA(0): Validating Mode "640x480":
(II) NVIDIA(0): 640 x 480 @ 60 Hz
(II) NVIDIA(0): Mode Source: EDID
(II) NVIDIA(0): Pixel Clock : 25.18 MHz
(II) NVIDIA(0): HRes, HSyncStart : 640, 656
(II) NVIDIA(0): HSyncEnd, HTotal : 752, 800
(II) NVIDIA(0): VRes, VSyncStart : 480, 490
(II) NVIDIA(0): VSyncEnd, VTotal : 492, 525
(II) NVIDIA(0): H/V Polarity : -/-
(II) NVIDIA(0): Mode is valid.
(II) NVIDIA(0):
(II) NVIDIA(0): Validating Mode "640x480":
(II) NVIDIA(0): 640 x 480 @ 73 Hz
(II) NVIDIA(0): Mode Source: EDID
(II) NVIDIA(0): Pixel Clock : 31.50 MHz
(II) NVIDIA(0): HRes, HSyncStart : 640, 664
(II) NVIDIA(0): HSyncEnd, HTotal : 704, 832
(II) NVIDIA(0): VRes, VSyncStart : 480, 489
(II) NVIDIA(0): VSyncEnd, VTotal : 492, 520
(II) NVIDIA(0): H/V Polarity : -/-
(WW) NVIDIA(0): Mode is rejected: Only 60 Hz VertRefresh modes are allowed
(WW) NVIDIA(0): for this TMDS encoder; this mode had VertRefresh 72.8 Hz.
(II) NVIDIA(0):
(II) NVIDIA(0): Validating Mode "640x480":
(II) NVIDIA(0): 640 x 480 @ 75 Hz
(II) NVIDIA(0): Mode Source: EDID
(II) NVIDIA(0): Pixel Clock : 31.50 MHz
(II) NVIDIA(0): HRes, HSyncStart : 640, 656
(II) NVIDIA(0): HSyncEnd, HTotal : 720, 840
(II) NVIDIA(0): VRes, VSyncStart : 480, 481
(II) NVIDIA(0): VSyncEnd, VTotal : 484, 500
(II) NVIDIA(0): H/V Polarity : -/-
(WW) NVIDIA(0): Mode is rejected: Only 60 Hz VertRefresh modes are allowed
(WW) NVIDIA(0): for this TMDS encoder; this mode had VertRefresh 75.0 Hz.
(II) NVIDIA(0):
(II) NVIDIA(0): Validating Mode "800x600":
(II) NVIDIA(0): 800 x 600 @ 56 Hz
(II) NVIDIA(0): Mode Source: EDID
(II) NVIDIA(0): Pixel Clock : 36.00 MHz
(II) NVIDIA(0): HRes, HSyncStart : 800, 824
(II) NVIDIA(0): HSyncEnd, HTotal : 896, 1024
(II) NVIDIA(0): VRes, VSyncStart : 600, 601
(II) NVIDIA(0): VSyncEnd, VTotal : 603, 625
(II) NVIDIA(0): H/V Polarity : +/+
(WW) NVIDIA(0): Mode is rejected: Only 60 Hz VertRefresh modes are allowed
(WW) NVIDIA(0): for this TMDS encoder; this mode had VertRefresh 56.2 Hz.
(II) NVIDIA(0):
(II) NVIDIA(0): Validating Mode "800x600":
(II) NVIDIA(0): 800 x 600 @ 60 Hz
(II) NVIDIA(0): Mode Source: EDID
(II) NVIDIA(0): Pixel Clock : 40.00 MHz
(II) NVIDIA(0): HRes, HSyncStart : 800, 840
(II) NVIDIA(0): HSyncEnd, HTotal : 968, 1056
(II) NVIDIA(0): VRes, VSyncStart : 600, 601
(II) NVIDIA(0): VSyncEnd, VTotal : 605, 628
(II) NVIDIA(0): H/V Polarity : +/+
(II) NVIDIA(0): Mode is valid.
(II) NVIDIA(0):
(II) NVIDIA(0): Validating Mode "800x600":
(II) NVIDIA(0): 800 x 600 @ 72 Hz
(II) NVIDIA(0): Mode Source: EDID
(II) NVIDIA(0): Pixel Clock : 50.00 MHz
(II) NVIDIA(0): HRes, HSyncStart : 800, 856
(II) NVIDIA(0): HSyncEnd, HTotal : 976, 1040
(II) NVIDIA(0): VRes, VSyncStart : 600, 637
(II) NVIDIA(0): VSyncEnd, VTotal : 643, 666
(II) NVIDIA(0): H/V Polarity : +/+
(WW) NVIDIA(0): Mode is rejected: Only 60 Hz VertRefresh modes are allowed
(WW) NVIDIA(0): for this TMDS encoder; this mode had VertRefresh 72.2 Hz.
(II) NVIDIA(0):
(II) NVIDIA(0): Validating Mode "800x600":
(II) NVIDIA(0): 800 x 600 @ 75 Hz
(II) NVIDIA(0): Mode Source: EDID
(II) NVIDIA(0): Pixel Clock : 49.50 MHz
(II) NVIDIA(0): HRes, HSyncStart : 800, 816
(II) NVIDIA(0): HSyncEnd, HTotal : 896, 1056
(II) NVIDIA(0): VRes, VSyncStart : 600, 601
(II) NVIDIA(0): VSyncEnd, VTotal : 604, 625
(II) NVIDIA(0): H/V Polarity : +/+
(WW) NVIDIA(0): Mode is rejected: Only 60 Hz VertRefresh modes are allowed
(WW) NVIDIA(0): for this TMDS encoder; this mode had VertRefresh 75.0 Hz.
(II) NVIDIA(0):
(II) NVIDIA(0): Validating Mode "1024x768":
(II) NVIDIA(0): 1024 x 768 @ 60 Hz
(II) NVIDIA(0): Mode Source: EDID
(II) NVIDIA(0): Pixel Clock : 65.00 MHz
(II) NVIDIA(0): HRes, HSyncStart : 1024, 1048
(II) NVIDIA(0): HSyncEnd, HTotal : 1184, 1344
(II) NVIDIA(0): VRes, VSyncStart : 768, 771
(II) NVIDIA(0): VSyncEnd, VTotal : 777, 806
(II) NVIDIA(0): H/V Polarity : -/-
(II) NVIDIA(0): Mode is valid.
(II) NVIDIA(0):
(II) NVIDIA(0): Validating Mode "1024x768":
(II) NVIDIA(0): 1024 x 768 @ 70 Hz
(II) NVIDIA(0): Mode Source: EDID
(II) NVIDIA(0): Pixel Clock : 75.00 MHz
(II) NVIDIA(0): HRes, HSyncStart : 1024, 1048
(II) NVIDIA(0): HSyncEnd, HTotal : 1184, 1328
(II) NVIDIA(0): VRes, VSyncStart : 768, 771
(II) NVIDIA(0): VSyncEnd, VTotal : 777, 806
(II) NVIDIA(0): H/V Polarity : -/-
(WW) NVIDIA(0): Mode is rejected: Only 60 Hz VertRefresh modes are allowed
(WW) NVIDIA(0): for this TMDS encoder; this mode had VertRefresh 70.1 Hz.
(II) NVIDIA(0):
(II) NVIDIA(0): Validating Mode "1024x768":
(II) NVIDIA(0): 1024 x 768 @ 75 Hz
(II) NVIDIA(0): Mode Source: EDID
(II) NVIDIA(0): Pixel Clock : 78.75 MHz
(II) NVIDIA(0): HRes, HSyncStart : 1024, 1040
(II) NVIDIA(0): HSyncEnd, HTotal : 1136, 1312
(II) NVIDIA(0): VRes, VSyncStart : 768, 769
(II) NVIDIA(0): VSyncEnd, VTotal : 772, 800
(II) NVIDIA(0): H/V Polarity : +/+
(WW) NVIDIA(0): Mode is rejected: Only 60 Hz VertRefresh modes are allowed
(WW) NVIDIA(0): for this TMDS encoder; this mode had VertRefresh 75.0 Hz.
(II) NVIDIA(0):
(II) NVIDIA(0): Validating Mode "1280x1024":
(II) NVIDIA(0): 1280 x 1024 @ 75 Hz
(II) NVIDIA(0): Mode Source: EDID
(II) NVIDIA(0): Pixel Clock : 135.00 MHz
(II) NVIDIA(0): HRes, HSyncStart : 1280, 1296
(II) NVIDIA(0): HSyncEnd, HTotal : 1440, 1688
(II) NVIDIA(0): VRes, VSyncStart : 1024, 1025
(II) NVIDIA(0): VSyncEnd, VTotal : 1028, 1066
(II) NVIDIA(0): H/V Polarity : +/+
(WW) NVIDIA(0): Mode is rejected: Only 60 Hz VertRefresh modes are allowed
(WW) NVIDIA(0): for this TMDS encoder; this mode had VertRefresh 75.0 Hz.
(II) NVIDIA(0):
(II) NVIDIA(0): Validating Mode "640x480":
(II) NVIDIA(0): 640 x 480 @ 60 Hz
(II) NVIDIA(0): Mode Source: X Configuration file ModeLine
(II) NVIDIA(0): Pixel Clock : 25.20 MHz
(II) NVIDIA(0): HRes, HSyncStart : 640, 656
(II) NVIDIA(0): HSyncEnd, HTotal : 752, 800
(II) NVIDIA(0): VRes, VSyncStart : 480, 490
(II) NVIDIA(0): VSyncEnd, VTotal : 492, 525
(II) NVIDIA(0): H/V Polarity : -/-
(II) NVIDIA(0): BestFit Backend for "640x480": 1280x1024
(II) NVIDIA(0): Mode is valid.
(II) NVIDIA(0):
(II) NVIDIA(0): Validating Mode "800x600":
(II) NVIDIA(0): 800 x 600 @ 60 Hz
(II) NVIDIA(0): Mode Source: X Configuration file ModeLine
(II) NVIDIA(0): Pixel Clock : 40.00 MHz
(II) NVIDIA(0): HRes, HSyncStart : 800, 840
(II) NVIDIA(0): HSyncEnd, HTotal : 968, 1056
(II) NVIDIA(0): VRes, VSyncStart : 600, 601
(II) NVIDIA(0): VSyncEnd, VTotal : 605, 628
(II) NVIDIA(0): H/V Polarity : +/+
(II) NVIDIA(0): BestFit Backend for "800x600": 800x600
(II) NVIDIA(0): Mode is valid.
(II) NVIDIA(0):
(II) NVIDIA(0): Validating Mode "1024x768":
(II) NVIDIA(0): 1024 x 768 @ 60 Hz
(II) NVIDIA(0): Mode Source: X Configuration file ModeLine
(II) NVIDIA(0): Pixel Clock : 65.00 MHz
(II) NVIDIA(0): HRes, HSyncStart : 1024, 1048
(II) NVIDIA(0): HSyncEnd, HTotal : 1184, 1344
(II) NVIDIA(0): VRes, VSyncStart : 768, 771
(II) NVIDIA(0): VSyncEnd, VTotal : 777, 806
(II) NVIDIA(0): H/V Polarity : -/-
(II) NVIDIA(0): BestFit Backend for "1024x768": 1024x768
(II) NVIDIA(0): Mode is valid.
(II) NVIDIA(0):
(II) NVIDIA(0): Validating Mode "640x350":
(II) NVIDIA(0): 640 x 350 @ 85 Hz
(II) NVIDIA(0): Mode Source: X Server
(II) NVIDIA(0): Pixel Clock : 31.50 MHz
(II) NVIDIA(0): HRes, HSyncStart : 640, 672
(II) NVIDIA(0): HSyncEnd, HTotal : 736, 832
(II) NVIDIA(0): VRes, VSyncStart : 350, 382
(II) NVIDIA(0): VSyncEnd, VTotal : 385, 445
(II) NVIDIA(0): H/V Polarity : +/-
(WW) NVIDIA(0): Mode is rejected: Only 60 Hz VertRefresh modes are allowed
(WW) NVIDIA(0): for this TMDS encoder; this mode had VertRefresh 85.1 Hz.
(II) NVIDIA(0):
(II) NVIDIA(0): Validating Mode "320x175":
(II) NVIDIA(0): 320 x 175 @ 85 Hz
(II) NVIDIA(0): Mode Source: X Server
(II) NVIDIA(0): Pixel Clock : 15.75 MHz
(II) NVIDIA(0): HRes, HSyncStart : 320, 336
(II) NVIDIA(0): HSyncEnd, HTotal : 368, 416
(II) NVIDIA(0): VRes, VSyncStart : 175, 191
(II) NVIDIA(0): VSyncEnd, VTotal : 192, 222
(II) NVIDIA(0): H/V Polarity : +/-
(II) NVIDIA(0): Extra : DoubleScan
(WW) NVIDIA(0): Mode is rejected: Only 60 Hz VertRefresh modes are allowed
(WW) NVIDIA(0): for this TMDS encoder; this mode had VertRefresh 85.3 Hz.
(II) NVIDIA(0):
(II) NVIDIA(0): Validating Mode "640x400":
(II) NVIDIA(0): 640 x 400 @ 85 Hz
(II) NVIDIA(0): Mode Source: X Server
(II) NVIDIA(0): Pixel Clock : 31.50 MHz
(II) NVIDIA(0): HRes, HSyncStart : 640, 672
(II) NVIDIA(0): HSyncEnd, HTotal : 736, 832
(II) NVIDIA(0): VRes, VSyncStart : 400, 401
(II) NVIDIA(0): VSyncEnd, VTotal : 404, 445
(II) NVIDIA(0): H/V Polarity : -/+
(WW) NVIDIA(0): Mode is rejected: Only 60 Hz VertRefresh modes are allowed
(WW) NVIDIA(0): for this TMDS encoder; this mode had VertRefresh 85.1 Hz.
(II) NVIDIA(0):
(II) NVIDIA(0): Validating Mode "320x200":
(II) NVIDIA(0): 320 x 200 @ 85 Hz
(II) NVIDIA(0): Mode Source: X Server
(II) NVIDIA(0): Pixel Clock : 15.75 MHz
(II) NVIDIA(0): HRes, HSyncStart : 320, 336
(II) NVIDIA(0): HSyncEnd, HTotal : 368, 416
(II) NVIDIA(0): VRes, VSyncStart : 200, 200
(II) NVIDIA(0): VSyncEnd, VTotal : 202, 222
(II) NVIDIA(0): H/V Polarity : -/+
(II) NVIDIA(0): Extra : DoubleScan
(WW) NVIDIA(0): Mode is rejected: Only 60 Hz VertRefresh modes are allowed
(WW) NVIDIA(0): for this TMDS encoder; this mode had VertRefresh 85.3 Hz.
(II) NVIDIA(0):
(II) NVIDIA(0): Validating Mode "720x400":
(II) NVIDIA(0): 720 x 400 @ 85 Hz
(II) NVIDIA(0): Mode Source: X Server
(II) NVIDIA(0): Pixel Clock : 35.50 MHz
(II) NVIDIA(0): HRes, HSyncStart : 720, 756
(II) NVIDIA(0): HSyncEnd, HTotal : 828, 936
(II) NVIDIA(0): VRes, VSyncStart : 400, 401
(II) NVIDIA(0): VSyncEnd, VTotal : 404, 446
(II) NVIDIA(0): H/V Polarity : -/+
(WW) NVIDIA(0): Mode is rejected: Only 60 Hz VertRefresh modes are allowed
(WW) NVIDIA(0): for this TMDS encoder; this mode had VertRefresh 85.0 Hz.
(II) NVIDIA(0):
(II) NVIDIA(0): Validating Mode "360x200":
(II) NVIDIA(0): 360 x 200 @ 85 Hz
(II) NVIDIA(0): Mode Source: X Server
(II) NVIDIA(0): Pixel Clock : 17.75 MHz
(II) NVIDIA(0): HRes, HSyncStart : 360, 378
(II) NVIDIA(0): HSyncEnd, HTotal : 414, 468
(II) NVIDIA(0): VRes, VSyncStart : 200, 200
(II) NVIDIA(0): VSyncEnd, VTotal : 202, 223
(II) NVIDIA(0): H/V Polarity : -/+
(II) NVIDIA(0): Extra : DoubleScan
(WW) NVIDIA(0): Mode is rejected: Only 60 Hz VertRefresh modes are allowed
(WW) NVIDIA(0): for this TMDS encoder; this mode had VertRefresh 85.0 Hz.
(II) NVIDIA(0):
(II) NVIDIA(0): Validating Mode "320x240":
(II) NVIDIA(0): 320 x 240 @ 60 Hz
(II) NVIDIA(0): Mode Source: X Server
(II) NVIDIA(0): Pixel Clock : 12.59 MHz
(II) NVIDIA(0): HRes, HSyncStart : 320, 328
(II) NVIDIA(0): HSyncEnd, HTotal : 376, 400
(II) NVIDIA(0): VRes, VSyncStart : 240, 245
(II) NVIDIA(0): VSyncEnd, VTotal : 246, 262
(II) NVIDIA(0): H/V Polarity : -/-
(II) NVIDIA(0): Extra : DoubleScan
(II) NVIDIA(0): BestFit Backend for "320x240": 1280x1024
(II) NVIDIA(0): Mode is valid.
(II) NVIDIA(0):
(II) NVIDIA(0): Validating Mode "320x240":
(II) NVIDIA(0): 320 x 240 @ 73 Hz
(II) NVIDIA(0): Mode Source: X Server
(II) NVIDIA(0): Pixel Clock : 15.75 MHz
(II) NVIDIA(0): HRes, HSyncStart : 320, 332
(II) NVIDIA(0): HSyncEnd, HTotal : 352, 416
(II) NVIDIA(0): VRes, VSyncStart : 240, 244
(II) NVIDIA(0): VSyncEnd, VTotal : 246, 260
(II) NVIDIA(0): H/V Polarity : -/-
(II) NVIDIA(0): Extra : DoubleScan
(WW) NVIDIA(0): Mode is rejected: Only 60 Hz VertRefresh modes are allowed
(WW) NVIDIA(0): for this TMDS encoder; this mode had VertRefresh 72.8 Hz.
(II) NVIDIA(0):
(II) NVIDIA(0): Validating Mode "320x240":
(II) NVIDIA(0): 320 x 240 @ 75 Hz
(II) NVIDIA(0): Mode Source: X Server
(II) NVIDIA(0): Pixel Clock : 15.75 MHz
(II) NVIDIA(0): HRes, HSyncStart : 320, 328
(II) NVIDIA(0): HSyncEnd, HTotal : 360, 420
(II) NVIDIA(0): VRes, VSyncStart : 240, 240
(II) NVIDIA(0): VSyncEnd, VTotal : 242, 250
(II) NVIDIA(0): H/V Polarity : -/-
(II) NVIDIA(0): Extra : DoubleScan
(WW) NVIDIA(0): Mode is rejected: Only 60 Hz VertRefresh modes are allowed
(WW) NVIDIA(0): for this TMDS encoder; this mode had VertRefresh 75.0 Hz.
(II) NVIDIA(0):
(II) NVIDIA(0): Validating Mode "320x240":
(II) NVIDIA(0): 320 x 240 @ 85 Hz
(II) NVIDIA(0): Mode Source: X Server
(II) NVIDIA(0):


Top
 Profile  
 
 Post subject: Conf and log files
PostPosted: Mon Sep 08, 2008 6:43 pm 
Offline
Joined: Mon Jan 30, 2006 1:18 pm
Posts: 86
Location: Dayton, Ohio
Hmm...I tried posting the Xorg.0.log file and got just less than half of it posted. The file is 2400+ lines. Is there a message size limit?

Anyway, here's the xorg.conf file:


Code:
Section "ServerLayout"
   Identifier     "XFree86 Configured"
   Screen      0  "Screen0" 0 0
   InputDevice    "Keyboard0" "CoreKeyboard"
# PS/2 Mouse not detected
# Serial Mouse not detected
        InputDevice    "USB Mouse" "CorePointer"
EndSection

Section "ServerFlags"
   Option "AllowMouseOpenFail"  "true"
   
EndSection

Section "Files"
   RgbPath      "/usr/share/X11/rgb"
   ModulePath   "/usr/lib/xorg/modules"
   FontPath     "/usr/share/fonts/X11/misc:unscaled"
   FontPath     "/usr/share/fonts/X11/75dpi:unscaled"
   FontPath     "/usr/share/fonts/X11/100dpi:unscaled"
   FontPath     "/usr/share/fonts/X11/Type1"
   FontPath     "/usr/share/fonts/X11/Speedo"
   FontPath     "/usr/share/fonts/X11/PEX"
# Additional fonts: Locale, Gimp, TTF...
   FontPath     "/usr/share/fonts/X11/cyrillic"
#   FontPath     "/usr/share/fonts/X11/latin2/75dpi"
#   FontPath     "/usr/share/fonts/X11/latin2/100dpi"
# True type and type1 fonts are also handled via xftlib, see /etc/X11/XftConfig!
   FontPath     "/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType"
   FontPath     "/usr/share/fonts/truetype"
   FontPath     "/usr/share/fonts/latex-ttf-fonts"
EndSection

Section "Module"
# Comments: see http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=346408
   Load  "dbe" # Double Buffering Extension, very important.
#   Load  "dri" # This shouldn't be available choice if user has selected driver vga, vesa or nv.
   Load  "glx" # GLX Extension.
   Load  "freetype" # Freetype fonts.
   Load  "type1"  # Type 1 fonts
   Load  "record" # Developer extension, usually not needed
#   Load  "extmod" # This is okay, but if you look into "man xorg.conf" you'll find option NOT to include DGA extension with extmod, and for a good reason.. DGA causes instability as it access videoram without consulting X about it.
   SubSection      "extmod"
      Option          "omit xfree86-dga"
   EndSubSection
#   Load  "speedo" # Speedo fonts, this module doesn't exist in Xorg 7.0.17
# The following are deprecated/unstable/unneeded in Xorg 7.0
#       Load  "ddc"  # ddc probing of monitor, this should be never present, as it gets automatically loaded.
#   Load  "GLcore" # This should be never present, as it gets automatically loaded.
#       Load  "bitmap" # Should be never present, as it gets automatically loaded. This is a font module, and loading it in xorg.conf makes X try to load it twice.
EndSection

Section "InputDevice"
   Identifier  "Keyboard0"
   Driver      "kbd"
        Option      "CoreKeyboard"
   Option "XkbRules" "xorg"
   Option "XkbModel" "pc105"
   Option "XkbLayout" "us"

EndSection

Section "InputDevice"
   Identifier  "Serial Mouse"
   Driver      "mouse"
   Option      "Protocol" "Microsoft"
   Option      "Device" "/dev/ttyS0"
   Option      "Emulate3Buttons" "true"
   Option      "Emulate3Timeout" "70"
   Option       "SendCoreEvents"  "true"
EndSection

Section "InputDevice"
   Identifier  "PS/2 Mouse"
   Driver      "mouse"
   Option      "Protocol" "auto"
Option          "ZAxisMapping"          "4 5"
   Option      "Device" "/dev/psaux"
   Option      "Emulate3Buttons" "true"
   Option      "Emulate3Timeout" "70"
   Option       "SendCoreEvents"  "true"
EndSection

Section "InputDevice"
        Identifier      "USB Mouse"
        Driver          "mouse"
        Option          "Device"                "/dev/input/mice"
   Option      "SendCoreEvents"   "true"
        Option          "Protocol"              "IMPS/2"
        Option          "ZAxisMapping"          "4 5"
        Option          "Buttons"               "5"
EndSection

# Auto-generated by KNOPPIX mkxf86config

Section "Monitor"
   Identifier   "Monitor0"
   Option   "DPMS"   "true"
   Option "UseEdidDpi" "FALSE"
   Option "DPI" "100 x 100"
#   HorizSync    28.0 - 78.0 # Warning: This may fry very old Monitors
   HorizSync    28.0 - 96.0 # Warning: This may fry old Monitors
   VertRefresh  50.0 - 75.0 # Very conservative. May flicker.
#   VertRefresh  50.0 - 62.0 # Extreme conservative. Will flicker. TFT default.
   #  Default modes distilled from
   #      "VESA and Industry Standards and Guide for Computer Display Monitor
   #       Timing", version 1.0, revision 0.8, adopted September 17, 1998.
   #  $XFree86: xc/programs/Xserver/hw/xfree86/etc/vesamodes,v 1.4 1999/11/18 16:52:17 tsi Exp $
   # 640x480 @ 60Hz (Industry standard) hsync: 31.5kHz
   ModeLine "640x480"    25.2  640  656  752  800    480  490  492  525 -hsync -vsync
   # 800x600 @ 60Hz (VESA) hsync: 37.9kHz
   ModeLine "800x600"    40.0  800  840  968 1056    600  601  605  628 +hsync +vsync
   # 1024x768 @ 60Hz (VESA) hsync: 48.4kHz
   ModeLine "1024x768"   65.0 1024 1048 1184 1344    768  771  777  806 -hsync -vsync
EndSection

Section "Device"
   ### Available Driver options are:-
# sw_cursor is needed for some ati and radeon cards
        #Option     "sw_cursor"
        #Option     "hw_cursor"
        #Option     "NoAccel"
        #Option     "ShowCache"
        #Option     "ShadowFB"
        #Option     "UseFBDev"
        #Option     "Rotate"
   Identifier  "Card0"
# The following line is auto-generated by KNOPPIX mkxf86config
   Driver      "nvidia"
   Option "XvmcUsesTextures" "false"
   Option "UseEvents" "true"
   VendorName  "All"
   BoardName   "All"
#   BusID       "PCI:1:0:0"
EndSection

Section "Screen"
   Identifier "Screen0"
   Device     "Card0"
   Monitor    "Monitor0"
   DefaultColorDepth 24
   SubSection "Display"
      Depth     1
      Modes "1024x768" "800x600" "640x480"
   EndSubSection
   SubSection "Display"
      Depth     4
      Modes "1024x768" "800x600" "640x480"
   EndSubSection
   SubSection "Display"
      Depth     8
      Modes "1024x768" "800x600" "640x480"
   EndSubSection
   SubSection "Display"
      Depth     15
      Modes "1024x768" "800x600" "640x480"
   EndSubSection
   SubSection "Display"
      Depth     16
      Modes "1024x768" "800x600" "640x480"
   EndSubSection
   SubSection "Display"
      Depth     24
      Modes "1024x768" "800x600" "640x480"
   EndSubSection
   SubSection "Display"
      Depth     32
      Modes "1024x768" "800x600" "640x480"
   EndSubSection
EndSection

Section "DRI"
   Mode 0666
EndSection


Top
 Profile  
 
 Post subject: Further testing
PostPosted: Sat Sep 13, 2008 9:44 am 
Offline
Joined: Mon Jan 30, 2006 1:18 pm
Posts: 86
Location: Dayton, Ohio
I scheduled a recording, which the box seems to have done. When I tried to watch it the screen went black and I couldn't get back to the menu. I wiped the drive and am trying the "upgrade" path from the last version (which worked except for the "prebuffering pause" crap) to the newest version. My attempt last night seemed to go well (I even got mystery voices coming out of my speakers at one point that said something like "database sync") but when it got to "updating database schema" it ran all night and still didn't complete. I've wiped (again) and started over (again)...


Top
 Profile  
 
 Post subject:
PostPosted: Sat Sep 13, 2008 10:43 am 
Offline
Joined: Thu Mar 25, 2004 11:00 am
Posts: 9551
Location: Arlington, MA
Have you read the R5.5 Hints? It covers these issues along with many others. Also see this thread on: Database Errors After Upgrade

There were a couple things that caused problems with the DB restore and waiting for the schema upgrade by the MythTV BE respectively.

Both are relatively easy to fix manually, and Human has just updated the live patcher with an automatic fix for the various causes of the first one.

The second one you can just ignore for now if the "Waiting for schema upgrade to complete..." takes more than 5-10 minutes. It's just not looking for the right log message.


Top
 Profile  
 
 Post subject:
PostPosted: Sun Sep 14, 2008 6:35 am 
Offline
Joined: Mon Jan 30, 2006 1:18 pm
Posts: 86
Location: Dayton, Ohio
Thanks, tjc, for the reply.

I went back, checked the hints, and found the references you made. Made the corrections, used the live patcher, got back into MythTV after the changes. I tried following the instructions as to when I should run the live patcher. When I did (after the setup part where I defined the network addressing, et cetera) I ended up in strange territory--after setting up my capture card, the program kept complaining that I didn't have any storage directories defined. When I then tried to watch live TV, I'd get dumped right back to the menu. A check of the logs showed that, indeed, no directories had been created/assigned so there was no place to store the live buffer. I got a bit confused at that point, and looking at the MythTV site's instructions didn't help much. (It talked about the importance of creating the directories, but didn't go into details on how. I knew they should be created on hda3 for my system, but had problems making the logical leap on how to create a directory on hda3 specifically.) So I had apparently dumped out of Knoppmyth's setup unintenionally and some things didn't run to completion. I just wiped the drive and started with a fresh auto install from scratch. I'm back where I started.

I did figure out a couple of things to try. I kept getting messages in the frontend log (I believe) when it tried to change mode from "none" to "watch TV" because the ACPI daemon wasn't loaded. I followed instructions to load it; now that error's gone away. I also had tried force-installing a couple of older versions of the nVidia drivers with no luck.

So, is there some magic to posting a 2500+ line code file? I'd like to try re-posting the Xorg.0.log for wiser folks than I to examine but can't seem to do the whole thing.


Top
 Profile  
 
 Post subject:
PostPosted: Tue Sep 16, 2008 10:04 am 
Offline
Joined: Mon Jan 30, 2006 1:18 pm
Posts: 86
Location: Dayton, Ohio
Okay, figured out how to create two directories and assign them to hda3. The concept certainly is different than in the DOS/Windows world--everything's virtual. But I had two directories for recordings--one for LiveTV and one just for recordings--on the partition with all the room, and I assigned them to the appropriate storage groups. Then I tried watching LiveTV from the menu, but would get dumped immediately back to the menu again. The log files didn't show anything particularly informative.

Since I'd been mucking around quite a bit with settings I wiped the HD and started from scratch (fifth, sixth time? I've lost count...) but the power and internet connection went out not long after I got to mythtv-setup. Now I have power again but the internet may be down for another couple of days, so I'm stuck waiting. Man, Hurricane Ike really tore things up for a lot of people--even those of us up in Ohio!


Top
 Profile  
 
PostPosted: Tue Sep 30, 2008 10:01 am 
Offline
Joined: Mon Jan 30, 2006 1:18 pm
Posts: 86
Location: Dayton, Ohio
...so I guess I'm on my own. I just LOVE being a pioneer. :roll:


Top
 Profile  
 
 Post subject:
PostPosted: Tue Sep 30, 2008 6:43 pm 
Offline
Site Admin
Joined: Fri Sep 19, 2003 6:37 pm
Posts: 2657
Location: Whittier, Ca
Harbinger wrote:
So, is there some magic to posting a 2500+ line code file? I'd like to try re-posting the Xorg.0.log for wiser folks than I to examine but can't seem to do the whole thing.
Pastebin.com, zip it up and post it on your homepage. Surely you ISP gives you some storage for a home page...


Top
 Profile  
 
 Post subject:
PostPosted: Wed Oct 01, 2008 12:17 pm 
Offline
Joined: Mon Jan 30, 2006 1:18 pm
Posts: 86
Location: Dayton, Ohio
cecil wrote:
Harbinger wrote:
So, is there some magic to posting a 2500+ line code file? I'd like to try re-posting the Xorg.0.log for wiser folks than I to examine but can't seem to do the whole thing.
Pastebin.com, zip it up and post it on your homepage. Surely you ISP gives you some storage for a home page...


I'd never heard of pastebin.com, and just visited them...how cool is that? I had no idea a service like that existed. I'll post that file, with a link here, when I get home tonight. As for a personal homepage...yeah, I believe RoadRunner allows me some space but I've never bothered setting it up. I just started two blogs within the past month, though...I was the only geek I knew without a web presence. :shock:


Top
 Profile  
 
 Post subject: Here they are!
PostPosted: Sat Oct 04, 2008 11:05 am 
Offline
Joined: Mon Jan 30, 2006 1:18 pm
Posts: 86
Location: Dayton, Ohio
On pastebin.com--first, my Xorg.0.log:

http://pastebin.com/m57e0235e

Next, my xorg.conf file:

http://pastebin.com/m48f61051


Top
 Profile  
 
 Post subject:
PostPosted: Mon Oct 13, 2008 2:03 pm 
Offline
Joined: Mon Jan 30, 2006 1:18 pm
Posts: 86
Location: Dayton, Ohio
Could someone please look at these files and LMK if anything's obviously wrong that I can correct? It would be greatly appreciated.


Top
 Profile  
 
 Post subject:
PostPosted: Wed Oct 22, 2008 5:22 pm 
Offline
Joined: Mon Jan 30, 2006 1:18 pm
Posts: 86
Location: Dayton, Ohio
For heaven's sake--let's not have everyone jump in at once! :)


Top
 Profile  
 
 Post subject:
PostPosted: Wed Oct 22, 2008 9:30 pm 
Offline
Joined: Sat Sep 02, 2006 1:46 pm
Posts: 44
I am probably the last guy you want looking over your xorg files, but there really doesn't seem to be anything wrong with them (there is only one error (EE) message -- something about a font path). The links that tjc/jzigmyth provided to the "hints" and wiki pages should give you alot of information. Otherwise, you may just need to explain the problem again with some more details.


Top
 Profile  
 
 Post subject:
PostPosted: Fri Oct 24, 2008 7:44 pm 
Offline
Joined: Mon Jan 30, 2006 1:18 pm
Posts: 86
Location: Dayton, Ohio
jbm2131--

Thanks for the reply. I'd already gone through the hints and troubleshooting as suggested with no joy. I guess it's a good thing I'm not depending on the box to record right now...except that I'm missing a few shows I really wanted to see in HD this fall.


Top
 Profile  
 
 Post subject: NRFPT
PostPosted: Thu Dec 04, 2008 8:03 am 
Offline
Joined: Mon Jan 30, 2006 1:18 pm
Posts: 86
Location: Dayton, Ohio
Well, it's literally been months since I posted this problem. Followed the suggested FAQs as well as the few suggestions made to assist in troubleshooting. I've been derailed due to an operation and subsequent recovery period so I haven't looked at it lately, but I'm pretty disappointed.

The program would at least work in the last version, albeit with jerkiness and picture aberrations when an overlay was done or channels changed. My hardware didn't change--something had to change in the new Xorg. However, despite posting my config files, nobody's been able to offer a solution.

For me, KnoppMyth is just Not Ready For Prime Time, and fails it's goal of making an easily-installed PVR for the masses. I'm going to have to shelve it until the next release and maybe I'll try it again then.


Top
 Profile  
 

Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 30 posts ] 
Go to page Previous  1, 2



All times are UTC - 6 hours




Who is online

Users browsing this forum: No registered users and 2 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Jump to:  
Powered by phpBB® Forum Software © phpBB Group

Theme Created By ceyhansuyu