View unanswered posts    View active topics

All times are UTC - 6 hours





Post new topic Reply to topic  [ 6 posts ] 
Print view Previous topic   Next topic  
Author Message
Search for:
 Post subject: i/o error on install
PostPosted: Tue Oct 27, 2009 8:14 pm 
Offline
Joined: Wed Mar 04, 2009 2:56 pm
Posts: 23
Location: Trumbull, CT
I am having trouble installing R5.5. I previously installed and used Knoppmyth for a few months but then had a failure. I tried to reinstall but kept having odd failures during the install. I kept seeing I/O errors and finally concluded that I had a hard drive problem, so I replaced the hard drive and tried to install again. I get to the copying files stage and then I get the following message:

Code:
cloop: zlib decompression error -3 uncompressing block 1076 65536/65536/27111/0 19294605-19321716
cloop: zlib decompression error -3 uncompressing block 1076 65536/65536/27111/0 19294605-19321716
cloop: zlib decompression error -3 uncompressing block 1076 65536/65536/27111/0 19294605-19321716
cloop: zlib decompression error -3 uncompressing block 1076 65536/65536/27111/0 19294605-19321716
cloop: zlib decompression error -3 uncompressing block 1076 65536/65536/27111/0 19294605-19321716
cloop: zlib decompression error -3 uncompressing block 1076 65536/65536/27111/0 19294605-19321716
cloop: zlib decompression error -3 uncompressing block 1076 65536/65536/27111/0 19294605-19321716
cloop: zlib decompression error -3 uncompressing block 1076 65536/65536/27111/0 19294605-19321716
cloop: zlib decompression error -3 uncompressing block 1076 65536/65536/27111/0 19294605-19321716
end_request: I/O error, dev cloop0, sector 137684
Buffer I/O error on device cloop0, logical block 34421
Buffer I/O error on device cloop0, logical block 34422
Buffer I/O error on device cloop0, logical block 34423
Buffer I/O error on device cloop0, logical block 34424
Buffer I/O error on device cloop0, logical block 34425
Buffer I/O error on device cloop0, logical block 34426
Buffer I/O error on device cloop0, logical block 34427
Buffer I/O error on device cloop0, logical block 34428
Buffer I/O error on device cloop0, logical block 34429
Buffer I/O error on device cloop0, logical block 34430
cloop: zlib decompression error -3 uncompressing block 1076 65536/65536/27111/0 19294605-19321716
cloop: zlib decompression error -3 uncompressing block 1076 65536/65536/27111/0 19294605-19321716
end_request: I/O error, dev cloop0, sector 137820

then it continues copying files and seems to install but then hangs

I had to hand copy the above output, but I think it is all correct.

What is device cloop0? Could my CD/DVD be bad?


Top
 Profile  
 
 Post subject:
PostPosted: Tue Oct 27, 2009 11:27 pm 
Offline
Site Admin
Joined: Fri Sep 19, 2003 6:37 pm
Posts: 2657
Location: Whittier, Ca
Bad burn and or media incompatibility w/ reader and or reader going south.


Top
 Profile  
 
 Post subject: i/o error on install
PostPosted: Wed Oct 28, 2009 7:06 am 
Offline
Joined: Wed Mar 04, 2009 2:56 pm
Posts: 23
Location: Trumbull, CT
Thanks for the quick response. I burned another copy on different batch of CD's and I get the same errors.

Is it safe to assume the CD/DVD is bad? What is device cloop0?


Top
 Profile  
 
 Post subject: i/o error on install
PostPosted: Wed Oct 28, 2009 5:21 pm 
Offline
Joined: Wed Mar 04, 2009 2:56 pm
Posts: 23
Location: Trumbull, CT
Wait a minute, I just thought of something. I have the CD/DVD drive as the slave and the HDD as the master on a single IDE cable. Could that be an issue? Normally I wouldn't share the cable, but my motherboard has only 1 IDE plug and I was trying to avoid using a SATA HDD.


Top
 Profile  
 
 Post subject:
PostPosted: Wed Oct 28, 2009 7:28 pm 
Offline
Joined: Wed Mar 07, 2007 9:51 am
Posts: 173
Location: Uniontown, PA
Double check the hd jumper setting, and check the bios settings for UDMA access. Sometimes the master HD setting tells it that it's the ONLY drive on the wire. Is the cable an 80/40 wire version? Most newer systems want an 80 wire IDE cable, and will downgrade access speed if they find a 40 wire version.

Got another CD drive to plug in temporally?


Top
 Profile  
 
 Post subject: i/o error on install
PostPosted: Sun Nov 01, 2009 4:45 pm 
Offline
Joined: Wed Mar 04, 2009 2:56 pm
Posts: 23
Location: Trumbull, CT
I am using 80 wire (HDD) IDE cable. I have HDD as Master, CD/DVD as slave. But there seems to be something else going on. I pulled the CD/DVD and created a bootable flashdrive with the Knoppmyth iso on it and booted from the flashdrive. The install started and the same error occurred. I have changed hard drives, burnt new CD's from freshly downloaded .iso file, changed IDE cables. stuill gewtting the following errors (this is only a snippet of the error message - full error message shows in my original post)

Code:
cloop: zlib decompression error -3 uncompressing block 1076 65536/65536/27111/0 19294605-19321716
cloop: zlib decompression error -3 uncompressing block 1076 65536/65536/27111/0 19294605-19321716
cloop: zlib decompression error -3 uncompressing block 1076 65536/65536/27111/0 19294605-19321716

What do I do now?


Top
 Profile  
 

Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 6 posts ] 


All times are UTC - 6 hours




Who is online

Users browsing this forum: No registered users and 2 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Jump to:  
Powered by phpBB® Forum Software © phpBB Group

Theme Created By ceyhansuyu