LinHES Forums http://forums.linhes.org/ |
|
i/o error on install http://forums.linhes.org/viewtopic.php?f=1&t=20434 |
Page 1 of 1 |
Author: | pmljr [ Tue Oct 27, 2009 8:14 pm ] |
Post subject: | i/o error on install |
I am having trouble installing R5.5. I previously installed and used Knoppmyth for a few months but then had a failure. I tried to reinstall but kept having odd failures during the install. I kept seeing I/O errors and finally concluded that I had a hard drive problem, so I replaced the hard drive and tried to install again. I get to the copying files stage and then I get the following message: Code: cloop: zlib decompression error -3 uncompressing block 1076 65536/65536/27111/0 19294605-19321716
cloop: zlib decompression error -3 uncompressing block 1076 65536/65536/27111/0 19294605-19321716 cloop: zlib decompression error -3 uncompressing block 1076 65536/65536/27111/0 19294605-19321716 cloop: zlib decompression error -3 uncompressing block 1076 65536/65536/27111/0 19294605-19321716 cloop: zlib decompression error -3 uncompressing block 1076 65536/65536/27111/0 19294605-19321716 cloop: zlib decompression error -3 uncompressing block 1076 65536/65536/27111/0 19294605-19321716 cloop: zlib decompression error -3 uncompressing block 1076 65536/65536/27111/0 19294605-19321716 cloop: zlib decompression error -3 uncompressing block 1076 65536/65536/27111/0 19294605-19321716 cloop: zlib decompression error -3 uncompressing block 1076 65536/65536/27111/0 19294605-19321716 end_request: I/O error, dev cloop0, sector 137684 Buffer I/O error on device cloop0, logical block 34421 Buffer I/O error on device cloop0, logical block 34422 Buffer I/O error on device cloop0, logical block 34423 Buffer I/O error on device cloop0, logical block 34424 Buffer I/O error on device cloop0, logical block 34425 Buffer I/O error on device cloop0, logical block 34426 Buffer I/O error on device cloop0, logical block 34427 Buffer I/O error on device cloop0, logical block 34428 Buffer I/O error on device cloop0, logical block 34429 Buffer I/O error on device cloop0, logical block 34430 cloop: zlib decompression error -3 uncompressing block 1076 65536/65536/27111/0 19294605-19321716 cloop: zlib decompression error -3 uncompressing block 1076 65536/65536/27111/0 19294605-19321716 end_request: I/O error, dev cloop0, sector 137820 then it continues copying files and seems to install but then hangs I had to hand copy the above output, but I think it is all correct. What is device cloop0? Could my CD/DVD be bad? |
Author: | cecil [ Tue Oct 27, 2009 11:27 pm ] |
Post subject: | |
Bad burn and or media incompatibility w/ reader and or reader going south. |
Author: | pmljr [ Wed Oct 28, 2009 7:06 am ] |
Post subject: | i/o error on install |
Thanks for the quick response. I burned another copy on different batch of CD's and I get the same errors. Is it safe to assume the CD/DVD is bad? What is device cloop0? |
Author: | pmljr [ Wed Oct 28, 2009 5:21 pm ] |
Post subject: | i/o error on install |
Wait a minute, I just thought of something. I have the CD/DVD drive as the slave and the HDD as the master on a single IDE cable. Could that be an issue? Normally I wouldn't share the cable, but my motherboard has only 1 IDE plug and I was trying to avoid using a SATA HDD. |
Author: | larrybpsu [ Wed Oct 28, 2009 7:28 pm ] |
Post subject: | |
Double check the hd jumper setting, and check the bios settings for UDMA access. Sometimes the master HD setting tells it that it's the ONLY drive on the wire. Is the cable an 80/40 wire version? Most newer systems want an 80 wire IDE cable, and will downgrade access speed if they find a 40 wire version. Got another CD drive to plug in temporally? |
Author: | pmljr [ Sun Nov 01, 2009 4:45 pm ] |
Post subject: | i/o error on install |
I am using 80 wire (HDD) IDE cable. I have HDD as Master, CD/DVD as slave. But there seems to be something else going on. I pulled the CD/DVD and created a bootable flashdrive with the Knoppmyth iso on it and booted from the flashdrive. The install started and the same error occurred. I have changed hard drives, burnt new CD's from freshly downloaded .iso file, changed IDE cables. stuill gewtting the following errors (this is only a snippet of the error message - full error message shows in my original post) Code: cloop: zlib decompression error -3 uncompressing block 1076 65536/65536/27111/0 19294605-19321716
cloop: zlib decompression error -3 uncompressing block 1076 65536/65536/27111/0 19294605-19321716 cloop: zlib decompression error -3 uncompressing block 1076 65536/65536/27111/0 19294605-19321716 What do I do now? |
Page 1 of 1 | All times are UTC - 6 hours |
Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |