| LinHES Forums http://forums.linhes.org/ |
|
| Knoppmyth won't even install http://forums.linhes.org/viewtopic.php?f=1&t=2476 |
Page 1 of 1 |
| Author: | freakwent [ Thu Sep 23, 2004 3:33 pm ] |
| Post subject: | Knoppmyth won't even install |
On my system I can change the time zone, say yes, then it take me back to the time zone menu without any change. After the format and the install, two blue lines of the (ncurses?) screen are displayed, and caps and scroll lock keys flash in a kernel panic. Nothing is installed to the MBR, and it's not due to BIOS virus protection. The ISO MD5's OK and the burn is good. I haven't another system to test this in (yet). Are these known problems? Where can I get the logs produced by the failed install from, to see what's happening? |
|
| Author: | Xsecrets [ Thu Sep 23, 2004 4:22 pm ] |
| Post subject: | |
maybe you should search the forums to see if they are known issues, maybe search for blink keyboard. |
|
| Author: | carys [ Sat Sep 25, 2004 9:54 pm ] |
| Post subject: | |
I am having the exact same problem. I get through all of the questions on Auto Install and at 85% complete on the copy process it loses part of the display and the Caps and Scroll lock start to blink. Hardware config: AMD K6-300 MHz 192MB RAM 13 GB Western Digital HDD HP CD burner Generic i740 AGP Video card SoundBlaster 16 10bT card (Via Chip-Unknown mfg) tried with Nic removed and same result |
|
| Author: | Xsecrets [ Sat Sep 25, 2004 11:32 pm ] |
| Post subject: | |
see previous post. you would thing since you found this thread you would have seen the answer I already posted. |
|
| Author: | carys [ Mon Sep 27, 2004 6:52 pm ] |
| Post subject: | |
I saw the earlier post, I just didn't realize it was an "answer". I did search but the only things I found were problems on systems that were already installed. Some people had problems with their NICs which is why I tried without it. Others had BIOS issues but mine is up to date and I have disabled all power management. I guess I will try a full distro and then install myth. |
|
| Author: | notivo [ Sat Oct 02, 2004 10:19 am ] |
| Post subject: | |
This is a known problem, I believe cecil blamed it on the kernel last time. It happens sometimes when the system is rebooting. Try unpluging your network cable until the front-end starts coming up. It is the only workaround I know. Then buy a UPS so you don't have to reboot or it doesn't get stuck like that during a brown out. |
|
| Author: | hotboy041582 [ Sun Oct 10, 2004 12:12 pm ] |
| Post subject: | |
I'll tell you what I had to do since this sounds similar to mine. The screen blanks out during the install about 85%through (like a screensaver kicking in) if you touch any key it will fail. So don't touch any key and let it sit for 10 or 20 mins to be sure its done and touch a key and came up saying installation complete and everything works ok. Otherwise if you didn't let it set and finish installation it will fail and you'll get the blinking keyboard lights. |
|
| Author: | Liv2Cod [ Sun Oct 10, 2004 12:44 pm ] |
| Post subject: | |
Another tip -- use a PS/2 keyboard and mouse. My system goes into a kernel panic if I try to use USB peripherals. I could get it working with a USB mouse but a USB keyboard kills it every time. |
|
| Page 1 of 1 | All times are UTC - 6 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|