| LinHES Forums http://forums.linhes.org/ |
|
| XF86Config-4 examples http://forums.linhes.org/viewtopic.php?f=1&t=258 |
Page 1 of 1 |
| Author: | avallach [ Tue Dec 09, 2003 9:45 am ] |
| Post subject: | XF86Config-4 examples |
I am having some promblems with video output to the TV. I am using a Asus GeForce 3 Deluxe card (S-Video). I was wondering if some people could pose their XF86Config-4 files so I could see any differences between mine and theirs. Thanks |
|
| Author: | Xsecrets [ Tue Dec 09, 2003 3:19 pm ] |
| Post subject: | |
well from mine with onbaord nvidia 4mx from nforce2 motherobard the relevant parts are Section "Device" ### Available Driver options are:- # sw_cursor is needed for some ati and radeon cards Option "sw_cursor" Option "ConnectedMonitor" "TV" #Option "hw_cursor" #Option "NoAccel" #Option "ShowCache" #Option "ShadowFB" #Option "UseFBDev" #Option "Rotate" Identifier "Card0" # The following line is auto-generated by KNOPPIX mkxf86config Driver "nvidia" VendorName "All" BoardName "All" # BusID "PCI:1:0:0" EndSection Section "Monitor" Identifier "Monitor0" Option "DPMS" "true" # HorizSync 28.0 - 78.0 # Warning: This may fry very old Monitors HorizSync 30-50 # Warning: This may fry old Monitors VertRefresh 60 # Very conservative. May flicker. # These are some Modelines that happen to work on many systems # Especially the "1024x768" has been thoroughly tested, even on Laptops Modeline "640x480" 25.175 640 664 760 800 480 491 493 525 #60Hz Modeline "800x600" 40.12 800 848 968 1056 600 601 605 628 #60Hz Modeline "1024x768" 85 1024 1056 1152 1360 768 784 787 823 Modeline "1152x864" 92 1152 1208 1368 1474 864 865 875 895 Modeline "1152x864" 110 1152 1240 1324 1552 864 864 876 908 Modeline "1152x864" 135 1152 1464 1592 1776 864 864 876 908 Modeline "1152x864" 137.65 1152 1184 1312 1536 864 866 885 902 -HSync -VSync Modeline "1280x1024" 80 1280 1296 1512 1568 1024 1025 1037 1165 Interlace Modeline "1280x1024" 110 1280 1328 1512 1712 1024 1025 1028 1054 Modeline "1280x1024" 126.5 1280 1312 1472 1696 1024 1032 1040 1068 -HSync -VSync Modeline "1280x1024" 135 1280 1312 1456 1712 1024 1027 1030 1064 Modeline "1280x1024" 135 1280 1312 1416 1664 1024 1027 1030 1064 Modeline "1280x1024" 157.5 1280 1344 1504 1728 1024 1025 1028 1072 +HSync +VSync Modeline "1280x1024" 181.75 1280 1312 1440 1696 1024 1031 1046 1072 -HSync -VSync Modeline "1600x1200" 162 1600 1664 1856 2160 1200 1201 1204 1250 +HSync +VSync Modeline "1600x1200" 189 1600 1664 1856 2160 1200 1201 1204 1250 -HSync -VSync Modeline "1600x1200" 202.5 1600 1664 1856 2160 1200 1201 1204 1250 +HSync +VSync Modeline "1600x1200" 220 1600 1616 1808 2080 1200 1204 1207 1244 +HSync +VSync ModeLine "1800x1440" 230 1800 1896 2088 2392 1440 1441 1444 1490 +HSync +VSync ModeLine "1800x1440" 250 1800 1896 2088 2392 1440 1441 1444 1490 +HSync +VSync EndSection |
|
| Author: | webview [ Fri Jan 09, 2004 6:23 pm ] |
| Post subject: | |
Do you have anything like this, maybe at the bottom of XF86Config-4: Section "DRI" Mode 0666 EndSection Thanks, |
|
| Author: | Xsecrets [ Fri Jan 09, 2004 6:44 pm ] |
| Post subject: | |
If you are using a nvidia card you need to remove or comment out that section. The nvidia drivers do not use dri. althought it usually doesn't hurt anything. |
|
| Page 1 of 1 | All times are UTC - 6 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|