| LinHES Forums http://forums.linhes.org/ |
|
| ivtv forced itself to set to NTSC. http://forums.linhes.org/viewtopic.php?f=1&t=3972 |
Page 1 of 1 |
| Author: | kellogs [ Sat Mar 26, 2005 11:30 pm ] |
| Post subject: | ivtv forced itself to set to NTSC. |
alias char-major-81 videodev alias char-major-61 lirc_i2c options ivtv debug=1 options saa7115 enable_output=1 output_select=0 pal=1 options tuner=5 options msp3400 once=1 simple=1 install ivtv /sbin/modprobe tuner; /sbin/modprobe msp3400; /sbin/modprobe saa7115; /sbin/modprobe --ignore-install ivtv remove ivtv /sbin/modprobe -r --ignore-remove ivtv && /sbin/modprobe -r saa7115 && /sbin/modprobe -r msp3400 && /sbin/modprobe -r tuner Linux video capture interface: v1.00 ivtv: Unknown parameter `ivtv_pal' ivtv: ==================== START INIT IVTV ==================== ivtv: version 0.2.0 (rc3a) loading ivtv: Linux version: 2.6.9-chw-4 SMP preempt 586 gcc-3.3 ivtv: In case of problems please include the debug info ivtv: between the START INIT IVTV and END INIT IVTV lines when ivtv: mailing the ivtv-devel mailinglist. ivtv: Autodetected WinTV PVR 250 card ivtv: Found an iTVC15 based chip ACPI: PCI interrupt 0000:01:06.0[A] -> GSI 16 (level, high) -> IRQ 16 ivtv: Unreasonably low latency timer, setting to 64 (was 32) ivtv: XXX PCI device: 0x01e0 vendor: 0x10de tveeprom: Hauppauge: model = 48034, rev = F221, serial# = 5179276 tveeprom: tuner = Philips FM1216 (idx = 21, type = 5) tveeprom: tuner fmt = PAL(B/G) (eeprom = 0x04, v4l2 = 0x00000007) tveeprom: audio_processor = MSP3415 (type = 6) ivtv: i2c attach [client=tveeprom[0],ok] ivtv: Tuner Type 5, Tuner formats 0x00000007, Radio: yes, Model 0x00992491, Revision 0x00000005 ivtv: PAL tuner detected ivtv: Radio detected tuner: Ignoring new-style parameters in presence of obsolete ones tuner: chip found at addr 0xc2 i2c-bus ivtv i2c driver #0 ivtv: i2c attach [client=(tuner unset),ok] tuner: type set to 5 (Philips PAL_BG (FI1216 and compatibles)) by insmod option tuner: The type=<n> insmod option will go away soon. tuner: Please use the tuner=<n> option provided by tuner: tv aard core driver (bttv, saa7134, ...) instead. saa7115: Unknown parameter `enable_output' saa7115: starting probe for adapter ivtv i2c driver #0 (0x10005) saa7115: detecting saa7115 client on address 0x42 saa7115: writing init values ivtv: i2c attach [client=saa7115[0],ok] saa7115: status: (1E) 0x00, (1F) 0xc0 msp34xx: ivtv version msp34xx: init: chip=MSP3415G-B8, has NICAM support, simple (D) mode, simpler (G) no-thread mode msp34xx: $Id$ compiled on: Feb 5 2005 20:42:28 ivtv: i2c attach [client=MSP3415G-B8,ok] ivtv: Encoder revision: 0x02040011 ivtv: Decoder revision: 0x02020023 ivtv: Configuring WinTV PVR 250 card with 5 streams ivtv: Create DMA stream 0 using 256 16384 byte buffers 4194304 kbytes total ivtv: Registered v4l2 device, streamtype 0 minor 0 ivtv: Create DMA stream 1 ivtv: Registered v4l2 device, streamtype 1 minor 32 ivtv: Create stream 2 using 40 52224 byte buffers 2097152 kbytes total ivtv: Registered v4l2 device, streamtype 2 minor 224 ivtv: Create DMA stream 3 using 455 4608 byte buffers 2097152 kbytes total ivtv: Registered v4l2 device, streamtype 3 minor 24 ivtv: Create stream 4 ivtv: Registered v4l2 device, streamtype 4 minor 64 ivtv: Setting Tuner 5 ivtv: Setting audio matrix to input 3, output 1 ivtv: Switching standard to PAL. ivtv: ivtv_enc_thread: pid = 2001, itv = 0xe0e5d920 saa7115: decoder set norm PAL saa7115: set audio: 0x01 ivtv: Initialized WinTV PVR 250, card #0 ivtv: ==================== END INIT IVTV ==================== ivtv: Switching standard to NTSC. saa7115: decoder set norm NTSC saa7115: set audio: 0x01 saa7115: decoder disable output saa7115: decoder set input (0) saa7115: now setting Composite input ivtv: Setting audio matrix to input 1, output 1 saa7115: decoder enable output saa7115: decoder set size saa7115: decoder disable output input: PC Speaker saa7115: decoder enable output Why after init ivtv to pal ... it sets itself to NTSC? which script is being called? Using R5A12. Thanks |
|
| Page 1 of 1 | All times are UTC - 6 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|