LinHES Forums http://forums.linhes.org/ |
|
r5a15.1 hangs at boot http://forums.linhes.org/viewtopic.php?f=1&t=4539 |
Page 1 of 1 |
Author: | Ezekiel rage [ Wed May 11, 2005 7:31 pm ] |
Post subject: | r5a15.1 hangs at boot |
I've been tring for 3 days to install this and having no luck at all. I've probably made 6 cd's. Burning them as slow as nero will let me--8x. Right before it finishes installing, a lot of error messages pop up on the screen. White letters on black background. They go by so fast I can't read them all. Most say something about not beeing able to find or read something. Then the last screen comes up saying install was succesful and to reboot. Upon reboot, an error message comes up... LILO 22.6.1 Loading Linux...... Block move error 0 - signature not found I know almost nothing about linux. Any help anyone could give me is greatly appreciated. the specs on the comp are: Asus cusl2-c w/1 Ghz PIII Maxtor 250 gb hard drive 50x cd rom Geforce 3 Ti 200 A firewire card w/TI chipset soundblaster Live! No nic--knoppmyth kept locking up tryng to get an ip address so I pulled it out 512 meg of memory |
Author: | Ezekiel rage [ Thu May 12, 2005 1:26 am ] |
Post subject: | |
I figured out the problem. I have had this machine overclocked for 3 years without a problem. 1.12 ghz is not much, but it was enough to keep knoppmyth from booting. I did a re-install, but keep getting the same errors near the end. But it does start up now. I've got several other problems now, chief among them is that MYsql is not configured properly and will not get the channel guide, but that is a problem for another section..... |
Author: | brendan [ Thu May 12, 2005 11:10 am ] |
Post subject: | |
Ezekiel rage wrote: I figured out the problem. I have had this machine overclocked for 3 years without a problem. 1.12 ghz is not much, but it was enough to keep knoppmyth from booting. I did a re-install, but keep getting the same errors near the end. But it does start up now. I've got several other problems now, chief among them is that MYsql is not configured properly and will not get the channel guide, but that is a problem for another section.....
Sounds like the install didn't actually complete... -brendan |
Author: | Ezekiel rage [ Thu May 12, 2005 1:44 pm ] |
Post subject: | |
That's what I thought too. So after I clocked it back to stock, I re-installed. But I still am getting the same errors just before it quits. They go by so quickly that I cannot read them all. Does knoppmyth make any log files during install? Maybe a log has in it what did not install. I also don't have a capture card in the machine. Could that be a problem? I don't plan on using one because I am going to record from my Motorola DCT-6412's firewire port. |
Author: | cesman [ Thu May 12, 2005 2:57 pm ] |
Post subject: | |
Errors at the end is normal... |
Author: | piffy [ Fri Jul 01, 2005 8:50 pm ] |
Post subject: | |
In my case disabling my second hard drive durring the upgrade cleared up the problem.... weird but it worked. |
Page 1 of 1 | All times are UTC - 6 hours |
Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |