| LinHES Forums http://forums.linhes.org/ |
|
| LAN problem of an linux beginner http://forums.linhes.org/viewtopic.php?f=1&t=4889 |
Page 1 of 1 |
| Author: | Schaubi666 [ Sun Jun 12, 2005 3:06 am ] |
| Post subject: | LAN problem of an linux beginner |
Hi, i installed R5A16 on a new drive, no problems so far. But no browser installed, i want to install via "apt-get install xxx" but no connection possible. i have a lan behind a router. with Knoppix 3.9 evrything is fine. what to check? ping 127.0.0.1 works, but no other! thx for help. Schlaubi |
|
| Author: | jac1d [ Sun Jun 12, 2005 6:49 am ] |
| Post subject: | |
Hi There, 127.0.0.1 is what is known as the loopback interface. It is the local ip address of your ethernet card, so you're not pinging outside the box, you're just looping back. Thus it (should) always work. the command using the command ` Code: ifconfig ` at the prompt to show the configuration of your current interface. If you have a single ethernet interface it should display as "eth0" which is the first ethernet (interfaces in linux number from 0 up).The command ` Code: netcardconfig ` can be used to specify your IP address configuration. It is menu driven and can be run from a command prompt. If you are behind a router that uses DHCP, then you should select DHCP instead of a static address. During the installation it should have asked you if you wanted to Broadcast for an IP or something to that effect. The normal answer, behind a home router, is Yes. THis will enabled DHCP, however you can also enable it from the netcardconfig program. To check connectivity to the rest of the world, look at the output of ifconfig once you complete your netcardconfig and if you have a valid IP address try to ping a host in the outside world, for example " Code: ping www.news.com "Also try tracing the path to it to see where your packets go: Code: traceroute www.news.com (or better yet, us an IP in case your DNS isn't working) Code: traceroute 24.222.0.5 (CTRL-C will break you out of it) Should show something like this (your path will be totally different but the point is that you see the routers from your house to their server): Code: [root@blackops ~]# traceroute 24.222.0.5
traceroute to 24.222.0.5 (24.222.0.5), 30 hops max, 38 byte packets 1 10.200.0.1 (10.200.0.1) 59.590 ms 58.390 ms 64.249 ms 2 fa1-0.aggr3.bwi1.network.coloco.com (144.202.255.13) 57.646 ms 54.036 ms 61.796 ms 3 fa5-0.core2.bwi1.network.coloco.com (144.202.255.6) 61.764 ms 66.261 ms 63.896 ms 4 fa5-0.core1.bwi1.network.coloco.com (144.202.255.5) 66.146 ms 55.519 ms 58.966 ms 5 157.130.48.161 (157.130.48.161) 61.225 ms 52.960 ms 61.832 ms 6 0.so-2-1-0.XL2.DCA5.ALTER.NET (152.63.39.74) 60.421 ms 54.655 ms 59.913 ms 7 0.so-7-0-0.XL2.MTL1.ALTER.NET (152.63.133.57) 71.266 ms 69.521 ms 79.355 ms 8 0.so-3-0-0.XR2.MTL1.ALTER.NET (152.63.133.42) 69.301 ms 68.837 ms 70.127 ms 9 192.ATM6-0.GW2.HFX1.ALTER.NET (152.63.132.157) 85.129 ms 102.367 ms 84.652 ms 10 205.150.223.94 (205.150.223.94) 94.129 ms 93.408 ms 98.791 ms 11 hlfx-asr1.eastlink.ca (24.222.79.206) 98.086 ms 102.298 ms 97.416 ms 12 m5.eastlink.ca (24.222.0.5) 99.488 ms 94.786 ms 92.364 ms |
|
| Author: | kwyjibo [ Sun Jun 12, 2005 2:51 pm ] |
| Post subject: | Re: LAN problem of an linux beginner |
Schaubi666 wrote: i have a lan behind a router.
Try this. edit your /etc/network/interfaces like Code: auto lo eth0
iface lo inet loopback iface eth0 inet dhcp |
|
| Author: | Schaubi666 [ Tue Jun 14, 2005 2:18 pm ] |
| Post subject: | |
Thx jac1d + kwyjibo, i did netcardconfig and afterwards the eth0 was working. My next step is to fix my sound problem!!!! you may help ???? ALSA /usr/src/alsa/alsa-kernel/pci/cs46xx/cs46xx_lib.c:3138: ERROR:snd-cs46xx: never read ISV3 & ISV4 from AC'97 ALSA /usr/src/alsa/alsa-kernel/pci/cs46xx/cs46xx_lib.c:3139: Tryreloading the ALSA driver, if you find something ALSA /usr/src/alsa/alsa-kernel/pci/cs46xx/cs46xx_lib.c:3140: brokenor not working on your soundcard upon ALSA /usr/src/alsa/alsa-kernel/pci/cs46xx/cs46xx_lib.c:3141: thismessage please report to alsa-devel@lists.sourceforge.net Sound Fusion CS46xx: probe of 0000:00:0d.0 failed with error -5 Schlaubi P.S. i installed alsa also the modprob snd-cs46xx, was fine( no Output) but after reboot the errormessage appeared. |
|
| Author: | Xsecrets [ Tue Jun 14, 2005 4:17 pm ] |
| Post subject: | |
you really should open another thread for the sound issue, but any reason why you installed alsa instead of using the one that is already installed? |
|
| Author: | Schaubi666 [ Wed Jun 15, 2005 1:23 am ] |
| Post subject: | |
not realy, i visited the www.asla-procect.org site, and followed the instructions vor my cs46xx card. Schlaubi |
|
| Page 1 of 1 | All times are UTC - 6 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|