LinHES Forums :: View topic - [Solved] Install problems with R5A16, PVR500, HD3000

ivtv: ==================== START INIT IVTV ====================
ivtv: version 0.3.6 (l) loading
ivtv: Linux version: 2.6.11.9-chw-2 SMP preempt 586 gcc-3.3
ivtv: In case of problems please include the debug info
ivtv: between the START INIT IVTV and END INIT IVTV lines when
ivtv: mailing the ivtv-devel mailinglist.
ivtv: Autodetected WinTV PVR 150 card
ivtv: Found an iTVC16 based chip
ACPI: PCI interrupt 0000:03:08.0[A] -> GSI 18 (level, low) -> IRQ 18
ivtv: Unreasonably low latency timer, setting to 64 (was 32)
ivtv: XXX PCI device: 0x2570 vendor: 0x8086
tveeprom: Hauppauge: model = 23552, rev = D492, serial# = 8033941
tveeprom: tuner = Philips FQ1236A MK4 (idx = 92, type = 57)
tveeprom: tuner fmt = NTSC(M) (eeprom = 0x08, v4l2 = 0x00001000)
tveeprom: audio_processor = MSP3410D (type = 5)
ivtv: i2c attach [client=tveeprom[50],ok]
tuner: chip found at addr 0xc2 i2c-bus ivtv i2c driver #0
ivtv: i2c attach [client=(tuner unset),ok]
saa7115: starting probe for adapter ivtv i2c driver #0 (0x10005)
ivtv: Tuner Type 57, Tuner formats 0x00001000, Radio: yes, Model 0x00914652, Revision 0x00000001
ivtv: NTSC tuner detected
ivtv: Radio detected
cx25840: starting probe for adapter SMBus I801 adapter at 0c00 (0x0)
cx25840: detecting cx25840 client on address 0x88
cx25840: writing init values
i2c_adapter i2c-0: I2C level transfers not supported
i2c_adapter i2c-0: I2C level transfers not supported
i2c_adapter i2c-0: I2C level transfers not supported
i2c_adapter i2c-0: I2C level transfers not supported
i2c_adapter i2c-0: I2C level transfers not supported
i2c_adapter i2c-0: I2C level transfers not supported
i2c_adapter i2c-0: I2C level transfers not supported
i2c_adapter i2c-0: I2C level transfers not supported
i2c_adapter i2c-0: I2C level transfers not supported
i2c_adapter i2c-0: I2C level transfers not supported
i2c_adapter i2c-0: I2C level transfers not supported
i2c_adapter i2c-0: I2C level transfers not supported
i2c_adapter i2c-0: I2C level transfers not supported
i2c_adapter i2c-0: I2C level transfers not supported
i2c_adapter i2c-0: I2C level transfers not supported
i2c_adapter i2c-0: I2C level transfers not supported
i2c_adapter i2c-0: I2C level transfers not supported
i2c_adapter i2c-0: I2C level transfers not supported
i2c_adapter i2c-0: I2C level transfers not supported
cx25840: requesting /lib/modules/HcwMakoA.ROM
i2c_adapter i2c-0: I2C level transfers not supported
i2c_adapter i2c-0: I2C level transfers not supported
i2c_adapter i2c-0: I2C level transfers not supported
i2c_adapter i2c-0: I2C level transfers not supported
i2c_adapter i2c-0: I2C level transfers not supported
i2c_adapter i2c-0: I2C level transfers not supported
i2c_adapter i2c-0: I2C level transfers not supported
i2c_adapter i2c-0: I2C level transfers not supported
i2c_adapter i2c-0: I2C level transfers not supported
i2c_adapter i2c-0: I2C level transfers not supported
i2c_adapter i2c-0: I2C level transfers not supported
i2c_adapter i2c-0: I2C level transfers not supported
i2c_adapter i2c-0: I2C level transfers not supported
i2c_adapter i2c-0: I2C level transfers not supported
Unable to handle kernel NULL pointer dereference at virtual address 00000014
printing eip:
e27729da
*pde = 00000000
Oops: 0002 [#1]
PREEMPT SMP
Modules linked in: cx25840 ivtv sg nvidia eepro100 cx88_blackbird cx88_atsc ehci_hcd shpchp pci_hotplug intel_mch_agp 8250_pnp pcspkr tsdev evdev saa7115 msp3400 md5 ipv6 autofs4 af_packet snd_mixer_oss snd_ca0106 snd_ac97_codec snd_pcm snd_timer snd_page_alloc snd soundcore tuner cx8800 v4l1_compat v4l2_common e100 mii cx88_dvb cx8802 mt352 cx88xx i2c_algo_bit ir_common btcx_risc tveeprom videodev or51132 firmware_class video_buf_dvb dvb_core video_buf cx22702 dvb_pll i2c_i801 i2c_core cfi_cmdset_0002 cfi_util jedec_probe cfi_probe gen_probe ichxrom mtdcore chipreg map_funcs intel_agp agpgart parport_pc parport 8250 serial_core ohci1394 pcmcia yenta_socket rsrc_nonstatic pcmcia_core video thermal processor fan container button battery ac rtc ieee1394 usb_storage ohci_hcd uhci_hcd usbcore tmscsim BusLogic
CPU: 1
EIP: 0060:[<e27729da>] Tainted: P VLI
EFLAGS: 00010202 (2.6.11.9-chw-2)
EIP is at cx25840_load_fw_nohp+0x10a/0x300 [cx25840]
eax: 00000000 ebx: dc308400 ecx: 00000003 edx: dc308400
esi: dc308400 edi: e270f000 ebp: dc308400 esp: da6d5e4c
ds: 007b es: 007b ss: 0068
Process modprobe (pid: 4625, threadinfo=da6d4000 task=df2db550)
Stack: dc308400 dd795c80 c0000000 00000000 00000000 dc308400 00000000 e2773de0
00000001 e27709f3 dc308400 c140e020 00000000 da6d5ee1 ffffffff c03f1e00
20000092 00003530 dbcbdf44 00000001 da6d5ee0 c012fedb df258020 00065f01
Call Trace:
[<e27709f3>] cx25840_initialize+0x1b3/0x340 [cx25840]
[<c012fedb>] autoremove_wake_function+0x1b/0x40
[<c0215d01>] xfs_qm_vop_chown_reserve+0xf1/0x110
[<c0118c16>] __wake_up_common+0x36/0x60
[<c011cfad>] call_console_drivers+0x5d/0x110
[<c011d3b5>] release_console_sem+0x75/0xb0
[<c011d269>] vprintk+0xf9/0x150
[<c011d15f>] printk+0xf/0x20
[<e2771ec8>] cx25840_detect_client+0x158/0x1d0 [cx25840]
[<e10611c2>] i2c_probe+0x232/0x320 [i2c_core]
[<e2771f76>] cx25840_attach_adapter+0x36/0x40 [cx25840]
[<e2771d70>] cx25840_detect_client+0x0/0x1d0 [cx25840]
[<e106053a>] i2c_add_driver+0x8a/0xc0 [i2c_core]
[<e1573013>] m__init+0x13/0x22 [cx25840]
[<c01342a2>] sys_init_module+0x172/0x230
[<c0103017>] syscall_call+0x7/0xb
Code: 4d d6 ff ff 83 c4 0c 6a 01 6a 05 8b 44 24 30 50 e8 3c d6 ff ff a1 c4 53 77 e2 83 c4 0c 85 c0 74 11 8b 54 24 28 8b 42 0c 8b 40 10 <c7> 40 14 03 00 00 00 8d 47 02 31 ed 89 04 24 8d b4 26 00 00 00
<3>ivtv: Failed to load module cx25840

Author:	mbelly [ Fri Jun 17, 2005 3:38 am ]
Post subject:	[Solved] Install problems with R5A16, PVR500, HD3000
[Solved when I upgraded from ivtv 0.3.6L to 0.3.6o. Just remade and installed, rebooted and bam, TV.] ******************************************************************* Hi all, I tried getting Knoppmyth working according to Linuxgeek's post. ("R5A16 Rocks") Everything seemed to come together smoothly, but I got to a point where I needed to reboot, and now I get a hang on boot. The last 2 lines before the crash are: Code: <3>ivtv: Failed to load module cx25840 eth0: no IPv6 routers present My guess is that my real problem lies in the cx25840 module not loading, but has anyone else run across this problem? On another side note, has anyone else got the pvr-500 and pchdtv running on r5a16? [Edit: adding in the results of "modprobe ivtv" "dmesg"] dmesg: -------- Code:** ivtv: ==================== START INIT IVTV ==================== ivtv: version 0.3.6 (l) loading ivtv: Linux version: 2.6.11.9-chw-2 SMP preempt 586 gcc-3.3 ivtv: In case of problems please include the debug info ivtv: between the START INIT IVTV and END INIT IVTV lines when ivtv: mailing the ivtv-devel mailinglist. ivtv: Autodetected WinTV PVR 150 card ivtv: Found an iTVC16 based chip ACPI: PCI interrupt 0000:03:08.0[A] -> GSI 18 (level, low) -> IRQ 18 ivtv: Unreasonably low latency timer, setting to 64 (was 32) ivtv: XXX PCI device: 0x2570 vendor: 0x8086 tveeprom: Hauppauge: model = 23552, rev = D492, serial# = 8033941 tveeprom: tuner = Philips FQ1236A MK4 (idx = 92, type = 57) tveeprom: tuner fmt = NTSC(M) (eeprom = 0x08, v4l2 = 0x00001000) tveeprom: audio_processor = MSP3410D (type = 5) ivtv: i2c attach [client=tveeprom[50],ok] tuner: chip found at addr 0xc2 i2c-bus ivtv i2c driver #0 ivtv: i2c attach [client=(tuner unset),ok] saa7115: starting probe for adapter ivtv i2c driver #0 (0x10005) ivtv: Tuner Type 57, Tuner formats 0x00001000, Radio: yes, Model 0x00914652, Revision 0x00000001 ivtv: NTSC tuner detected ivtv: Radio detected cx25840: starting probe for adapter SMBus I801 adapter at 0c00 (0x0) cx25840: detecting cx25840 client on address 0x88 cx25840: writing init values i2c_adapter i2c-0: I2C level transfers not supported i2c_adapter i2c-0: I2C level transfers not supported i2c_adapter i2c-0: I2C level transfers not supported i2c_adapter i2c-0: I2C level transfers not supported i2c_adapter i2c-0: I2C level transfers not supported i2c_adapter i2c-0: I2C level transfers not supported i2c_adapter i2c-0: I2C level transfers not supported i2c_adapter i2c-0: I2C level transfers not supported i2c_adapter i2c-0: I2C level transfers not supported i2c_adapter i2c-0: I2C level transfers not supported i2c_adapter i2c-0: I2C level transfers not supported i2c_adapter i2c-0: I2C level transfers not supported i2c_adapter i2c-0: I2C level transfers not supported i2c_adapter i2c-0: I2C level transfers not supported i2c_adapter i2c-0: I2C level transfers not supported i2c_adapter i2c-0: I2C level transfers not supported i2c_adapter i2c-0: I2C level transfers not supported i2c_adapter i2c-0: I2C level transfers not supported i2c_adapter i2c-0: I2C level transfers not supported cx25840: requesting /lib/modules/HcwMakoA.ROM i2c_adapter i2c-0: I2C level transfers not supported i2c_adapter i2c-0: I2C level transfers not supported i2c_adapter i2c-0: I2C level transfers not supported i2c_adapter i2c-0: I2C level transfers not supported i2c_adapter i2c-0: I2C level transfers not supported i2c_adapter i2c-0: I2C level transfers not supported i2c_adapter i2c-0: I2C level transfers not supported i2c_adapter i2c-0: I2C level transfers not supported i2c_adapter i2c-0: I2C level transfers not supported i2c_adapter i2c-0: I2C level transfers not supported i2c_adapter i2c-0: I2C level transfers not supported i2c_adapter i2c-0: I2C level transfers not supported i2c_adapter i2c-0: I2C level transfers not supported i2c_adapter i2c-0: I2C level transfers not supported Unable to handle kernel NULL pointer dereference at virtual address 00000014 printing eip: e27729da pde = 00000000 Oops: 0002 [#1] PREEMPT SMP Modules linked in: cx25840 ivtv sg nvidia eepro100 cx88_blackbird cx88_atsc ehci_hcd shpchp pci_hotplug intel_mch_agp 8250_pnp pcspkr tsdev evdev saa7115 msp3400 md5 ipv6 autofs4 af_packet snd_mixer_oss snd_ca0106 snd_ac97_codec snd_pcm snd_timer snd_page_alloc snd soundcore tuner cx8800 v4l1_compat v4l2_common e100 mii cx88_dvb cx8802 mt352 cx88xx i2c_algo_bit ir_common btcx_risc tveeprom videodev or51132 firmware_class video_buf_dvb dvb_core video_buf cx22702 dvb_pll i2c_i801 i2c_core cfi_cmdset_0002 cfi_util jedec_probe cfi_probe gen_probe ichxrom mtdcore chipreg map_funcs intel_agp agpgart parport_pc parport 8250 serial_core ohci1394 pcmcia yenta_socket rsrc_nonstatic pcmcia_core video thermal processor fan container button battery ac rtc ieee1394 usb_storage ohci_hcd uhci_hcd usbcore tmscsim BusLogic CPU: 1 EIP: 0060:[<e27729da>] Tainted: P VLI EFLAGS: 00010202 (2.6.11.9-chw-2) EIP is at cx25840_load_fw_nohp+0x10a/0x300 [cx25840] eax: 00000000 ebx: dc308400 ecx: 00000003 edx: dc308400 esi: dc308400 edi: e270f000 ebp: dc308400 esp: da6d5e4c ds: 007b es: 007b ss: 0068 Process modprobe (pid: 4625, threadinfo=da6d4000 task=df2db550) Stack: dc308400 dd795c80 c0000000 00000000 00000000 dc308400 00000000 e2773de0 00000001 e27709f3 dc308400 c140e020 00000000 da6d5ee1 ffffffff c03f1e00 20000092 00003530 dbcbdf44 00000001 da6d5ee0 c012fedb df258020 00065f01 Call Trace: [<e27709f3>] cx25840_initialize+0x1b3/0x340 [cx25840] [<c012fedb>] autoremove_wake_function+0x1b/0x40 [<c0215d01>] xfs_qm_vop_chown_reserve+0xf1/0x110 [<c0118c16>] __wake_up_common+0x36/0x60 [<c011cfad>] call_console_drivers+0x5d/0x110 [<c011d3b5>] release_console_sem+0x75/0xb0 [<c011d269>] vprintk+0xf9/0x150 [<c011d15f>] printk+0xf/0x20 [<e2771ec8>] cx25840_detect_client+0x158/0x1d0 [cx25840] [<e10611c2>] i2c_probe+0x232/0x320 [i2c_core] [<e2771f76>] cx25840_attach_adapter+0x36/0x40 [cx25840] [<e2771d70>] cx25840_detect_client+0x0/0x1d0 [cx25840] [<e106053a>] i2c_add_driver+0x8a/0xc0 [i2c_core] [<e1573013>] m__init+0x13/0x22 [cx25840] [<c01342a2>] sys_init_module+0x172/0x230 [<c0103017>] syscall_call+0x7/0xb Code: 4d d6 ff ff 83 c4 0c 6a 01 6a 05 8b 44 24 30 50 e8 3c d6 ff ff a1 c4 53 77 e2 83 c4 0c 85 c0 74 11 8b 54 24 28 8b 42 0c 8b 40 10 <c7> 40 14 03 00 00 00 8d 47 02 31 ed 89 04 24 8d b4 26 00 00 00 <3>ivtv: Failed to load module cx25840 This is what my /etc/mythtv/modules/ivtv file looks like. Code:* alias char-major-81 videodev alias char-major-61 lirc_i2c alias char-major-81-1 ivtv alias char-major-81-2 ivtv #options cx25840 no_black_magic=1 options ivtv ivtv_std=0 tuner=57,57 tda9887=0,0 ivtv_debug=1 #options ivtv debug=1 #options tuner type=2 options cx25840 i2c_enable=1,1 options saa7127 i2c_enable=1,-1 options msp3400 once=1 simple=1 install ivtv /sbin/modprobe tuner; /sbin/modprobe msp3400; /sbin/modprobe saa7115; /sbin/modprobe --ignore-install ivtv remove ivtv /sbin/modprobe -r --ignore-remove ivtv && /sbin/modprobe -r saa7115 && /sbin/modprobe -r msp3400 && /sbin/modprobe -r tuner Thanks, ~Matt

LinHES Forums http://forums.linhes.org/

[Solved] Install problems with R5A16, PVR500, HD3000 http://forums.linhes.org/viewtopic.php?f=1&t=4945	Page 1 of 1

Page 1 of 1	All times are UTC - 6 hours
Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/