| LinHES Forums http://forums.linhes.org/ |
|
| FVWM not starting after install (eMachine) http://forums.linhes.org/viewtopic.php?f=1&t=504 |
Page 1 of 1 |
| Author: | lil_slice [ Tue Jan 13, 2004 11:28 pm ] |
| Post subject: | FVWM not starting after install (eMachine) |
I completed installation without error but x will not start (or rather will not start correctly.) I suspect it has something to do with my eMachines integrated graphics chip, but an not really sure. When I boot, everything is fine, but the screen just goes black when GDM starts, however the system appears to be running fine from what I can tell logging on to different tty's. This is the relevent end of /var/log/messages The tuner card is also very cheap and generic and although I have since removed it, reinstalled, and gotten the same error, I thought it could hurt to provide that part of the log as well. ------begin log chunk--------- Jan 13 21:56:38 BeBopTV kernel: ttyS00 at 0x03f8 (irq = 4) is a 16550A Jan 13 21:56:38 BeBopTV kernel: i810_rng hardware driver 0.9.8 loaded Jan 13 21:56:38 BeBopTV kernel: Linux video capture interface: v1.00 Jan 13 21:56:38 BeBopTV kernel: i2c-core.o: i2c core module Jan 13 21:56:38 BeBopTV kernel: i2c-algo-bit.o: i2c bit algorithm module Jan 13 21:56:38 BeBopTV kernel: bttv: driver version 0.7.104 loaded Jan 13 21:56:38 BeBopTV kernel: bttv: using 4 buffers with 2080k (8320k total) for capture Jan 13 21:56:38 BeBopTV kernel: bttv: Host bridge is Intel Corp. 82845G/GL [Brookdale-G] Chipset Host Bridge Jan 13 21:56:38 BeBopTV kernel: bttv: Bt8xx card found (0). Jan 13 21:56:38 BeBopTV kernel: bttv0: Bt878 (rev 2) at 02:0b.0, irq: 23, latency: 132, mmio: 0xf8000000 Jan 13 21:56:38 BeBopTV kernel: bttv0: detected: (Askey Magic/others) TView99 CPH06x [card=38], PCI subsystem ID is 144f:3000 Jan 13 21:56:38 BeBopTV kernel: bttv0: using: BT878(Askey CPH06X TView99) [card=38,autodetected] Jan 13 21:56:38 BeBopTV kernel: i2c-core.o: adapter bt848 #0 registered as adapter 0. Jan 13 21:56:38 BeBopTV kernel: bttv0: using tuner=-1 Jan 13 21:56:38 BeBopTV kernel: bttv0: i2c: checking for MSP34xx @ 0x80... not found Jan 13 21:56:38 BeBopTV kernel: bttv0: i2c: checking for TDA9875 @ 0xb0... not found Jan 13 21:56:38 BeBopTV kernel: bttv0: i2c: checking for TDA7432 @ 0x8a... not found Jan 13 21:56:38 BeBopTV kernel: tvaudio: TV audio decoder + audio/video mux driver Jan 13 21:56:38 BeBopTV kernel: tvaudio: known chips: tda9840,tda9873h,tda9874h/a,tda9850,tda9855,tea6300,tea6420,tda8425,pic16c54 (PV951) Jan 13 21:56:38 BeBopTV kernel: i2c-core.o: driver generic i2c audio driver registered. Jan 13 21:56:38 BeBopTV kernel: bttv0: PLL: 28636363 => 35468950 .. ok Jan 13 21:56:38 BeBopTV kernel: bttv0: registered device video0 Jan 13 21:56:38 BeBopTV kernel: bttv0: registered device vbi0 Jan 13 21:56:38 BeBopTV kernel: i2c-core.o: driver i2c TV tuner driver registered. Jan 13 21:56:38 BeBopTV kernel: tuner: probing bt848 #0 i2c adapter [id=0x10005] Jan 13 21:56:38 BeBopTV kernel: tuner: chip found @ 0xc0 Jan 13 21:56:38 BeBopTV kernel: i2c-core.o: client [(tuner unset)] registered to adapter [bt848 #0](pos. 0). Jan 13 21:56:38 BeBopTV kernel: 8139too Fast Ethernet driver 0.9.26 Jan 13 21:56:38 BeBopTV kernel: eth0: RealTek RTL8139 Fast Ethernet at 0xe08eb000, 00:40:2b:6c:80:c1, IRQ 17 Jan 13 21:56:38 BeBopTV kernel: ttyS1: LSR safety check engaged! Jan 13 21:56:38 BeBopTV kernel: ttyS1: LSR safety check engaged! Jan 13 21:56:38 BeBopTV kernel: kjournald starting. Commit interval 5 seconds Jan 13 21:56:38 BeBopTV kernel: EXT3 FS 2.4-0.9.19, 19 August 2002 on ide0(3,4), internal journal Jan 13 21:56:38 BeBopTV kernel: EXT3-fs: mounted filesystem with ordered data mode. Jan 13 21:56:38 BeBopTV kernel: blk: queue c03319e0, I/O limit 4095Mb (mask 0xffffffff) Jan 13 21:56:45 BeBopTV kernel: Linux agpgart interface v0.99 (c) Jeff Hartmann Jan 13 21:56:45 BeBopTV kernel: agpgart: Maximum main memory to use for agp memory: 438M Jan 13 21:56:45 BeBopTV kernel: agpgart: Detected an Intel 845G Chipset. Jan 13 21:56:45 BeBopTV kernel: agpgart: detected 892K stolen memory. Jan 13 21:56:45 BeBopTV kernel: agpgart: AGP aperture is 128M @ 0xf0000000 Jan 13 21:56:46 BeBopTV kernel: [drm] AGP 0.99 aperture @ 0xf0000000 128MB Jan 13 21:56:46 BeBopTV kernel: [drm] Initialized i830 1.3.2 20021108 on minor 0 Jan 13 21:56:46 BeBopTV kernel: mtrr: base(0xf0020000) is not aligned on a size(0x400000) boundary Jan 13 22:16:38 BeBopTV -- MARK -- -----end log chunk ----- Here some autodetect information for my video "card" and capture card. This information comes from booting from a MandrakeMove cd and looking at the hardware configuration, so this may or may not be 100% depending on the reliability of the mandrakemove distro to identify my specific hardware. video card Vender: Intel Corporation Bus: PCI Bus ID 8086:2562:109f:3186 Location on the bus: 0:2:0 Description: 82845 CGC (chipset graphics controller) Module: Card:Intel 845 Media class: DISPLAY_VGA tuner Vendor: Brooktree Corporation Bus: PCI Bus ID: 109e:36e:144f:3000 Location on the bus: 2:b:0 Description: Bt878 Module: bttv Media class: MULTIMEDIA_VIDEO Thanks |
|
| Author: | Xsecrets [ Wed Jan 14, 2004 8:19 am ] |
| Post subject: | |
check to make sure that your refresh rates in XF86Config-4 are appropriate for your monitor or tv whatever you are outputting to. |
|
| Author: | lil_slice [ Wed Jan 14, 2004 9:11 am ] |
| Post subject: | |
Got it, I changed the hsync rate, and also I think it was looking at the wrong bus. I changed it to the bus that Mandrake Move gave me, and now I'm rockin the X. Thanks. |
|
| Page 1 of 1 | All times are UTC - 6 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|