THANKS!!!
that fixed it.
the diff was:
diff modules.orig modules
45d44
< ivtv
| LinHES Forums http://forums.linhes.org/ |
|
| ivtv cannot load firmware with R5B7 http://forums.linhes.org/viewtopic.php?f=1&t=9066 |
Page 1 of 1 |
| Author: | goldenfri [ Sat Mar 18, 2006 8:03 pm ] |
| Post subject: | ivtv cannot load firmware with R5B7 |
I just did an auto upgrade to the newest knoppmyth everything seems to be good except that now ivtv won't start: ivtv: ==================== START INIT IVTV ==================== ivtv: version 0.4.3 (tagged release) loading ivtv: Linux version: 2.6.15-chw-2 SMP preempt 586 gcc-3.3 ivtv: In case of problems please include the debug info between ivtv: the START INIT IVTV and END INIT IVTV lines, along with ivtv: any module options, when mailing the ivtv-users mailinglist. ivtv0: Autodetected WinTV PVR 350 card (cx23415 based) ivtv0: Unreasonably low latency timer, setting to 64 (was 32) tuner 0-0061: chip found @ 0xc2 (ivtv i2c driver #0) ivtv0: i2c attach to card #0 ok [client=(tuner unset), addr=61] ivtv0: i2c attach to card #0 ok [client=MSP4448G-A2, addr=40] saa7115 0-0021: saa7115 found @ 0x42 (ivtv i2c driver #0) ivtv0: i2c attach to card #0 ok [client=saa7115, addr=21] ivtv0: i2c attach to card #0 ok [client=tveeprom, addr=50] saa7127 0-0044: saa7127 found @ 0x88 (ivtv i2c driver #0) ivtv0: i2c attach to card #0 ok [client=saa7127, addr=44] ivtv0: unable to open firmware v4l-cx2341x-enc.fw ivtv0: did you put the firmware in the hotplug firmware directory? ivtv0 warning: failed loading encoder firmware ivtv0 warning: Error loading firmware -3! ivtv0: Error -3 initializing firmware. ivtv0: Error -12 on initialization ivtv: probe of 0000:00:0c.0 failed with error -12 ivtv: ==================== END INIT IVTV ==================== and yet: ls /usr/lib/hotplug/firmware/v4l-* /usr/lib/hotplug/firmware/v4l-cx2341x-dec.fw /usr/lib/hotplug/firmware/v4l-cx2341x-init.mpg /usr/lib/hotplug/firmware/v4l-cx2341x-enc.fw /usr/lib/hotplug/firmware/v4l-cx25840.fw all seems to be where it should... oh and I have a PVR350 that has been working great with an older version for many months. any ideas? [/code] |
|
| Author: | tjc [ Sat Mar 18, 2006 8:27 pm ] |
| Post subject: | |
Run these commands & reboot: Code: cd /etc
mv -f modules modules.orig sed '/ivtv/d' <modules.orig >modules diff modules.orig modules |
|
| Author: | goldenfri [ Sat Mar 18, 2006 8:57 pm ] |
| Post subject: | |
THANKS!!!
that fixed it. the diff was: diff modules.orig modules 45d44 < ivtv |
|
| Author: | tjc [ Sat Mar 18, 2006 10:20 pm ] |
| Post subject: | |
Pretty much as expected... 
|
|
| Author: | snaproll [ Sun Mar 19, 2006 10:12 am ] |
| Post subject: | |
Thanks tjc, I had pretty much the same issue, and those commands fixed it, but my diff result was 40d39 (??). I doubt we'd have figured THAT one out on our own ! 
|
|
| Author: | tjc [ Sun Mar 19, 2006 11:28 am ] |
| Post subject: | |
This is my list of R5B7 upgrade tips which covers this and other issues: http://mysettopbox.tv/phpBB2/viewtopic.php?t=9069 |
|
| Page 1 of 1 | All times are UTC - 6 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|