| LinHES Forums http://forums.linhes.org/ |
|
| Newbie: PVR350 + shuttle sk41G Svideo out +KnoppMythR4.2 http://forums.linhes.org/viewtopic.php?f=1&t=924 |
Page 1 of 1 |
| Author: | S-Cript [ Sun Mar 07, 2004 10:54 am ] |
| Post subject: | Newbie: PVR350 + shuttle sk41G Svideo out +KnoppMythR4.2 |
first of all maybe a newbie area is wise to create (since this knoppmyth is according to many the bomb compared to the Windowsvariants) second i installed( or better the CD installed) it completely without any problems during install) after rebooting the monitor went 'black' and i tested the other videochannel, only this was also 'black',then i connected the cable to the S-video of the shuttle and i got a screen.. after setting up the configuration, i rebooted the system and again the same as mentioned above, now on the 'general screen' same as on the 'real'screen, i only see 'the top left of the screen' (if you split a normal screen into 4 parts) all conclusive, can somebody please help me getting this thing started |
|
| Author: | SnapperDragon [ Mon Mar 08, 2004 12:00 pm ] |
| Post subject: | |
Not sure if you're in a NTSC area, but if you are in PAL, you will need to modify the file before doing this: After a clean install, make sure you install the nvidia drivers. From an x-term, type "install-nvidia.sh" Then, do the following: cp /usr/X11/XF86Config-4 /usr/X11/XF86Config-4.ORIGINAL cp /usr/X11/XF86Config-4.nvidia.sample /usr/X11/XF86Config-4 After a reboot (or X restart), you should be able to get output via SVIDEO from your shuttle's built-in svideo port to your tv. MAKE SURE IN THE BIOS YOU SETUP THE NTSC-M option. This worked for me on my shuttle sn41g2 box. |
|
| Author: | S-Cript [ Wed Mar 10, 2004 6:57 am ] |
| Post subject: | |
Thanx, im in the Pal region ( the Netherlands).. does that mean i still have to set the ntsc-m option the weird thing is,i couldn't find a 'ntfs-m' in the bios in the past second i want to use the PVR-350 as out to the TV, what do i need to do for this?? the other options you mentioned i'll try tonight |
|
| Author: | Xsecrets [ Wed Mar 10, 2004 8:01 am ] |
| Post subject: | |
Well don't have this system or anything, but I would think that if you are connecting to a pal tv you would not want to choose ntsc-m for tvout in the bios. My guess would be that you would choose pal-? . |
|
| Page 1 of 1 | All times are UTC - 6 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|