I auto-installed.
First boot gdm tried to load X three times then asked me if I wanted to view the output. I think I have fairly standard hardware (FX5200) (have run x on ubuntu,gentoo etc) see my lspci below.
I tried adding mode lines according to
Code:
`gtf 1280 1024 70 -x`
etc.
Is there a standard FX5200 I can use?
I am currently using a modified version of the one on the wiki. Please see my XF86Config-4 below.
What do I need to change?
Thanks in advance.
lspci:
Code:
0000:00:00.0 Host bridge: nVidia Corporation nForce2 AGP (different version?) (rev c1)
Subsystem: ABIT Computer Corp.: Unknown device 1c02
Flags: bus master, 66MHz, fast devsel, latency 0
Memory at e0000000 (32-bit, prefetchable) [size=64M]
Capabilities: [40] AGP version 3.0
Capabilities: [60] #08 [2001]
0000:00:00.1 RAM memory: nVidia Corporation nForce2 Memory Controller 1 (rev c1)
Subsystem: nVidia Corporation: Unknown device 0c17
Flags: 66MHz, fast devsel
0000:00:00.2 RAM memory: nVidia Corporation nForce2 Memory Controller 4 (rev c1)
Subsystem: nVidia Corporation: Unknown device 0c17
Flags: 66MHz, fast devsel
0000:00:00.3 RAM memory: nVidia Corporation nForce2 Memory Controller 3 (rev c1)
Subsystem: nVidia Corporation: Unknown device 0c17
Flags: 66MHz, fast devsel
0000:00:00.4 RAM memory: nVidia Corporation nForce2 Memory Controller 2 (rev c1)
Subsystem: nVidia Corporation: Unknown device 0c17
Flags: 66MHz, fast devsel
0000:00:00.5 RAM memory: nVidia Corporation nForce2 Memory Controller 5 (rev c1)
Subsystem: nVidia Corporation: Unknown device 0c17
Flags: 66MHz, fast devsel
0000:00:01.0 ISA bridge: nVidia Corporation nForce2 ISA Bridge (rev a4)
Subsystem: ABIT Computer Corp.: Unknown device 1c02
Flags: bus master, 66MHz, fast devsel, latency 0
Capabilities: [48] #08 [01e1]
0000:00:01.1 SMBus: nVidia Corporation nForce2 SMBus (MCP) (rev a2)
Subsystem: ABIT Computer Corp.: Unknown device 1c02
Flags: 66MHz, fast devsel, IRQ 5
I/O ports at d000 [size=32]
Capabilities: [44] Power Management version 2
0000:00:02.0 USB Controller: nVidia Corporation nForce2 USB Controller (rev a4) (prog-if 10 [OHCI])
Subsystem: ABIT Computer Corp.: Unknown device 1c02
Flags: bus master, 66MHz, fast devsel, latency 0, IRQ 16
Memory at e8002000 (32-bit, non-prefetchable) [size=4K]
Capabilities: [44] Power Management version 2
0000:00:02.1 USB Controller: nVidia Corporation nForce2 USB Controller (rev a4) (prog-if 10 [OHCI])
Subsystem: ABIT Computer Corp.: Unknown device 1c02
Flags: bus master, 66MHz, fast devsel, latency 0, IRQ 17
Memory at e8003000 (32-bit, non-prefetchable) [size=4K]
Capabilities: [44] Power Management version 2
0000:00:02.2 USB Controller: nVidia Corporation nForce2 USB Controller (rev a4) (prog-if 20 [EHCI])
Subsystem: ABIT Computer Corp.: Unknown device 1c02
Flags: bus master, 66MHz, fast devsel, latency 0, IRQ 17
Memory at e8004000 (32-bit, non-prefetchable) [size=256]
Capabilities: [44] #0a [2080]
Capabilities: [80] Power Management version 2
0000:00:04.0 Ethernet controller: nVidia Corporation nForce2 Ethernet Controller (rev a1)
Subsystem: ABIT Computer Corp.: Unknown device 1c02
Flags: bus master, 66MHz, fast devsel, latency 0, IRQ 19
Memory at e8005000 (32-bit, non-prefetchable) [size=4K]
I/O ports at d400 [size=8]
Capabilities: [44] Power Management version 2
0000:00:06.0 Multimedia audio controller: nVidia Corporation nForce2 AC97 Audio Controler (MCP) (rev a1)
Subsystem: ABIT Computer Corp.: Unknown device 1c02
Flags: bus master, 66MHz, fast devsel, latency 0, IRQ 16
I/O ports at d800 [size=256]
I/O ports at dc00 [size=128]
Memory at e8000000 (32-bit, non-prefetchable) [size=4K]
Capabilities: [44] Power Management version 2
0000:00:08.0 PCI bridge: nVidia Corporation nForce2 External PCI Bridge (rev a3) (prog-if 00 [Normal decode])
Flags: bus master, 66MHz, fast devsel, latency 0
Bus: primary=00, secondary=01, subordinate=01, sec-latency=32
Memory behind bridge: e6000000-e7ffffff
Prefetchable memory behind bridge: d8000000-dfffffff
0000:00:09.0 IDE interface: nVidia Corporation nForce2 IDE (rev a2) (prog-if 8a [Master SecP PriP])
Subsystem: ABIT Computer Corp.: Unknown device 1c02
Flags: bus master, 66MHz, fast devsel, latency 0
I/O ports at f000 [size=16]
Capabilities: [44] Power Management version 2
0000:00:1e.0 PCI bridge: nVidia Corporation nForce2 AGP (rev c1) (prog-if 00 [Normal decode])
Flags: bus master, 66MHz, medium devsel, latency 32
Bus: primary=00, secondary=02, subordinate=02, sec-latency=32
Memory behind bridge: e4000000-e5ffffff
Prefetchable memory behind bridge: d0000000-d7ffffff
0000:01:06.0 Multimedia video controller: Conexant Winfast TV2000 XP (rev 05)
Subsystem: Hauppauge computer works Inc.: Unknown device 3401
Flags: bus master, medium devsel, latency 32, IRQ 18
Memory at e6000000 (32-bit, non-prefetchable) [size=16M]
Capabilities: [44] Vital Product Data
Capabilities: [4c] Power Management version 2
0000:01:06.1 Multimedia controller: Conexant: Unknown device 8811 (rev 05)
Subsystem: Hauppauge computer works Inc.: Unknown device 3401
Flags: bus master, medium devsel, latency 32, IRQ 10
Memory at e7000000 (32-bit, non-prefetchable) [size=16M]
Capabilities: [4c] Power Management version 2
0000:01:07.0 Multimedia video controller: Internext Compression Inc iTVC16 (CX23416) MPEG-2 Encoder (rev 01)
Subsystem: Hauppauge computer works Inc. WinTV PVR 250
Flags: bus master, medium devsel, latency 64, IRQ 20
Memory at d8000000 (32-bit, prefetchable) [size=64M]
Capabilities: [44] Power Management version 2
0000:01:0a.0 Network controller: Intersil Corporation Prism 2.5 Wavelan chipset (rev 01)
Subsystem: 3Com Corporation: Unknown device 0001
Flags: bus master, medium devsel, latency 32, IRQ 18
Memory at dc000000 (32-bit, prefetchable) [size=4K]
Capabilities: [dc] Power Management version 2
0000:02:00.0 VGA compatible controller: nVidia Corporation NV34 [GeForce FX 5200] (rev a1) (prog-if 00 [VGA])
Flags: bus master, 66MHz, medium devsel, latency 32, IRQ 12
Memory at e4000000 (32-bit, non-prefetchable) [size=16M]
Memory at d0000000 (32-bit, prefetchable) [size=128M]
Expansion ROM at e5000000 [disabled] [size=128K]
Capabilities: [60] Power Management version 2
Capabilities: [44] AGP version 3.0
XFX86config
Code:
ection "ServerLayout"
Identifier "XFree86 Configured"
Screen 0 "Screen0" 0 0
InputDevice "Keyboard0" "CoreKeyboard"
InputDevice "PS/2 Mouse" "CorePointer"
EndSection
Section "ServerFlags"
Option "AllowMouseOpenFail" "true"
Option "NoPM" "true"
EndSection
Section "Files"
RgbPath "/usr/X11R6/lib/X11/rgb"
ModulePath "/usr/X11R6/lib/modules"
FontPath "/usr/X11R6/lib/X11/fonts/misc:unscaled"
FontPath "/usr/X11R6/lib/X11/fonts/misc"
FontPath "/usr/X11R6/lib/X11/fonts/75dpi:unscaled"
FontPath "/usr/X11R6/lib/X11/fonts/75dpi"
FontPath "/usr/X11R6/lib/X11/fonts/100dpi:unscaled"
FontPath "/usr/X11R6/lib/X11/fonts/100dpi"
FontPath "/usr/X11R6/lib/X11/fonts/Speedo"
FontPath "/usr/X11R6/lib/X11/fonts/Type1"
EndSection
Section "Module"
# Load "ddc" # ddc probing of monitor
# Load "GLcore"
Load "dbe"
Load "v4l"
Load "extmod"
Load "glx"
Load "bitmap" # bitmap-fonts
Load "speedo"
Load "type1"
Load "freetype"
Load "record"
EndSection
Section "InputDevice"
Identifier "Keyboard0"
Driver "keyboard"
Option "CoreKeyboard"
Option "XkbRules" "xfree86"
Option "XkbModel" "pc105"
Option "XkbLayout" "us"
EndSection
Section "InputDevice"
Identifier "PS/2 Mouse"
Driver "mouse"
Option "Protocol" "IMPS/2"
Option "ZAxisMapping" "4 5"
Option "Device" "/dev/psaux"
Option "Emulate3Buttons" "true"
Option "Emulate3Timeout" "70"
Option "SendCoreEvents" "true"
EndSection
# Auto-generated by KNOPPIX mkxf86config
Section "Monitor"
Identifier "Monitor0"
VendorName "IBM"
ModelName "IBM252f"
HorizSync 28.0 - 96.0
VertRefresh 50 - 75
# 1280x1024 @ 70.00 Hz (GTF) hsync: 74.62 kHz; pclk: 128.94 MHz
Modeline "1280x1024_70.00" 128.94 1280 1368 1504 1728 1024 1025 1028 1066 -HSync +Vsync
# 800x600 @ 70.00 Hz (GTF) hsync: 43.75 kHz; pclk: 45.50 MHz
Modeline "800x600_70.00" 45.50 800 840 920 1040 600 601 604 625 -HSync +Vsync
EndSection
Section "Device"
Identifier "Card0"
Driver "nvidia"
BoardName "nVidia GeForce FX5200"
#Option "RenderAccel" "1"
Option "ConnectedMonitor" "Monitor0"
Option "MetaModes" "1280x1024_70.00" "800x600_70.00"
Option "NoLogo" "1"
# sw_cursor is needed for some ati and radeon cards
#Option "sw_cursor"
# Other options...
#Option "hw_cursor"
#Option "NoAccel"
#Option "ShowCache"
#Option "ShadowFB"
#Option "UseFBDev"
#Option "Rotate"
# The following line is auto-generated by KNOPPIX mkxf86config
#BusID "PCI:1:0:0"
EndSection
Section "Screen"
Identifier "Screen0"
Device "Card0"
Monitor "Monitor0"
DefaultColorDepth 24
SubSection "Display"
Depth 24
Modes "1280x1024_70.00" "800x600_70.00"
EndSubSection
EndSection
#Section "DRI"
# Mode 0666
#EndSection