LinHES Forums http://forums.linhes.org/ |
|
Xserver fails to load: first boot. Help please. http://forums.linhes.org/viewtopic.php?f=1&t=9305 |
Page 1 of 1 |
Author: | pfb [ Mon Mar 27, 2006 10:59 am ] |
Post subject: | Xserver fails to load: first boot. Help please. |
I auto-installed. First boot gdm tried to load X three times then asked me if I wanted to view the output. I think I have fairly standard hardware (FX5200) (have run x on ubuntu,gentoo etc) see my lspci below. I tried adding mode lines according to Code: `gtf 1280 1024 70 -x` etc. Is there a standard FX5200 I can use? I am currently using a modified version of the one on the wiki. Please see my XF86Config-4 below. What do I need to change? Thanks in advance. lspci: Code: 0000:00:00.0 Host bridge: nVidia Corporation nForce2 AGP (different version?) (rev c1) Subsystem: ABIT Computer Corp.: Unknown device 1c02 Flags: bus master, 66MHz, fast devsel, latency 0 Memory at e0000000 (32-bit, prefetchable) [size=64M] Capabilities: [40] AGP version 3.0 Capabilities: [60] #08 [2001] 0000:00:00.1 RAM memory: nVidia Corporation nForce2 Memory Controller 1 (rev c1) Subsystem: nVidia Corporation: Unknown device 0c17 Flags: 66MHz, fast devsel 0000:00:00.2 RAM memory: nVidia Corporation nForce2 Memory Controller 4 (rev c1) Subsystem: nVidia Corporation: Unknown device 0c17 Flags: 66MHz, fast devsel 0000:00:00.3 RAM memory: nVidia Corporation nForce2 Memory Controller 3 (rev c1) Subsystem: nVidia Corporation: Unknown device 0c17 Flags: 66MHz, fast devsel 0000:00:00.4 RAM memory: nVidia Corporation nForce2 Memory Controller 2 (rev c1) Subsystem: nVidia Corporation: Unknown device 0c17 Flags: 66MHz, fast devsel 0000:00:00.5 RAM memory: nVidia Corporation nForce2 Memory Controller 5 (rev c1) Subsystem: nVidia Corporation: Unknown device 0c17 Flags: 66MHz, fast devsel 0000:00:01.0 ISA bridge: nVidia Corporation nForce2 ISA Bridge (rev a4) Subsystem: ABIT Computer Corp.: Unknown device 1c02 Flags: bus master, 66MHz, fast devsel, latency 0 Capabilities: [48] #08 [01e1] 0000:00:01.1 SMBus: nVidia Corporation nForce2 SMBus (MCP) (rev a2) Subsystem: ABIT Computer Corp.: Unknown device 1c02 Flags: 66MHz, fast devsel, IRQ 5 I/O ports at d000 [size=32] Capabilities: [44] Power Management version 2 0000:00:02.0 USB Controller: nVidia Corporation nForce2 USB Controller (rev a4) (prog-if 10 [OHCI]) Subsystem: ABIT Computer Corp.: Unknown device 1c02 Flags: bus master, 66MHz, fast devsel, latency 0, IRQ 16 Memory at e8002000 (32-bit, non-prefetchable) [size=4K] Capabilities: [44] Power Management version 2 0000:00:02.1 USB Controller: nVidia Corporation nForce2 USB Controller (rev a4) (prog-if 10 [OHCI]) Subsystem: ABIT Computer Corp.: Unknown device 1c02 Flags: bus master, 66MHz, fast devsel, latency 0, IRQ 17 Memory at e8003000 (32-bit, non-prefetchable) [size=4K] Capabilities: [44] Power Management version 2 0000:00:02.2 USB Controller: nVidia Corporation nForce2 USB Controller (rev a4) (prog-if 20 [EHCI]) Subsystem: ABIT Computer Corp.: Unknown device 1c02 Flags: bus master, 66MHz, fast devsel, latency 0, IRQ 17 Memory at e8004000 (32-bit, non-prefetchable) [size=256] Capabilities: [44] #0a [2080] Capabilities: [80] Power Management version 2 0000:00:04.0 Ethernet controller: nVidia Corporation nForce2 Ethernet Controller (rev a1) Subsystem: ABIT Computer Corp.: Unknown device 1c02 Flags: bus master, 66MHz, fast devsel, latency 0, IRQ 19 Memory at e8005000 (32-bit, non-prefetchable) [size=4K] I/O ports at d400 [size=8] Capabilities: [44] Power Management version 2 0000:00:06.0 Multimedia audio controller: nVidia Corporation nForce2 AC97 Audio Controler (MCP) (rev a1) Subsystem: ABIT Computer Corp.: Unknown device 1c02 Flags: bus master, 66MHz, fast devsel, latency 0, IRQ 16 I/O ports at d800 [size=256] I/O ports at dc00 [size=128] Memory at e8000000 (32-bit, non-prefetchable) [size=4K] Capabilities: [44] Power Management version 2 0000:00:08.0 PCI bridge: nVidia Corporation nForce2 External PCI Bridge (rev a3) (prog-if 00 [Normal decode]) Flags: bus master, 66MHz, fast devsel, latency 0 Bus: primary=00, secondary=01, subordinate=01, sec-latency=32 Memory behind bridge: e6000000-e7ffffff Prefetchable memory behind bridge: d8000000-dfffffff 0000:00:09.0 IDE interface: nVidia Corporation nForce2 IDE (rev a2) (prog-if 8a [Master SecP PriP]) Subsystem: ABIT Computer Corp.: Unknown device 1c02 Flags: bus master, 66MHz, fast devsel, latency 0 I/O ports at f000 [size=16] Capabilities: [44] Power Management version 2 0000:00:1e.0 PCI bridge: nVidia Corporation nForce2 AGP (rev c1) (prog-if 00 [Normal decode]) Flags: bus master, 66MHz, medium devsel, latency 32 Bus: primary=00, secondary=02, subordinate=02, sec-latency=32 Memory behind bridge: e4000000-e5ffffff Prefetchable memory behind bridge: d0000000-d7ffffff 0000:01:06.0 Multimedia video controller: Conexant Winfast TV2000 XP (rev 05) Subsystem: Hauppauge computer works Inc.: Unknown device 3401 Flags: bus master, medium devsel, latency 32, IRQ 18 Memory at e6000000 (32-bit, non-prefetchable) [size=16M] Capabilities: [44] Vital Product Data Capabilities: [4c] Power Management version 2 0000:01:06.1 Multimedia controller: Conexant: Unknown device 8811 (rev 05) Subsystem: Hauppauge computer works Inc.: Unknown device 3401 Flags: bus master, medium devsel, latency 32, IRQ 10 Memory at e7000000 (32-bit, non-prefetchable) [size=16M] Capabilities: [4c] Power Management version 2 0000:01:07.0 Multimedia video controller: Internext Compression Inc iTVC16 (CX23416) MPEG-2 Encoder (rev 01) Subsystem: Hauppauge computer works Inc. WinTV PVR 250 Flags: bus master, medium devsel, latency 64, IRQ 20 Memory at d8000000 (32-bit, prefetchable) [size=64M] Capabilities: [44] Power Management version 2 0000:01:0a.0 Network controller: Intersil Corporation Prism 2.5 Wavelan chipset (rev 01) Subsystem: 3Com Corporation: Unknown device 0001 Flags: bus master, medium devsel, latency 32, IRQ 18 Memory at dc000000 (32-bit, prefetchable) [size=4K] Capabilities: [dc] Power Management version 2 0000:02:00.0 VGA compatible controller: nVidia Corporation NV34 [GeForce FX 5200] (rev a1) (prog-if 00 [VGA]) Flags: bus master, 66MHz, medium devsel, latency 32, IRQ 12 Memory at e4000000 (32-bit, non-prefetchable) [size=16M] Memory at d0000000 (32-bit, prefetchable) [size=128M] Expansion ROM at e5000000 [disabled] [size=128K] Capabilities: [60] Power Management version 2 Capabilities: [44] AGP version 3.0 XFX86config Code: ection "ServerLayout"
Identifier "XFree86 Configured" Screen 0 "Screen0" 0 0 InputDevice "Keyboard0" "CoreKeyboard" InputDevice "PS/2 Mouse" "CorePointer" EndSection Section "ServerFlags" Option "AllowMouseOpenFail" "true" Option "NoPM" "true" EndSection Section "Files" RgbPath "/usr/X11R6/lib/X11/rgb" ModulePath "/usr/X11R6/lib/modules" FontPath "/usr/X11R6/lib/X11/fonts/misc:unscaled" FontPath "/usr/X11R6/lib/X11/fonts/misc" FontPath "/usr/X11R6/lib/X11/fonts/75dpi:unscaled" FontPath "/usr/X11R6/lib/X11/fonts/75dpi" FontPath "/usr/X11R6/lib/X11/fonts/100dpi:unscaled" FontPath "/usr/X11R6/lib/X11/fonts/100dpi" FontPath "/usr/X11R6/lib/X11/fonts/Speedo" FontPath "/usr/X11R6/lib/X11/fonts/Type1" EndSection Section "Module" # Load "ddc" # ddc probing of monitor # Load "GLcore" Load "dbe" Load "v4l" Load "extmod" Load "glx" Load "bitmap" # bitmap-fonts Load "speedo" Load "type1" Load "freetype" Load "record" EndSection Section "InputDevice" Identifier "Keyboard0" Driver "keyboard" Option "CoreKeyboard" Option "XkbRules" "xfree86" Option "XkbModel" "pc105" Option "XkbLayout" "us" EndSection Section "InputDevice" Identifier "PS/2 Mouse" Driver "mouse" Option "Protocol" "IMPS/2" Option "ZAxisMapping" "4 5" Option "Device" "/dev/psaux" Option "Emulate3Buttons" "true" Option "Emulate3Timeout" "70" Option "SendCoreEvents" "true" EndSection # Auto-generated by KNOPPIX mkxf86config Section "Monitor" Identifier "Monitor0" VendorName "IBM" ModelName "IBM252f" HorizSync 28.0 - 96.0 VertRefresh 50 - 75 # 1280x1024 @ 70.00 Hz (GTF) hsync: 74.62 kHz; pclk: 128.94 MHz Modeline "1280x1024_70.00" 128.94 1280 1368 1504 1728 1024 1025 1028 1066 -HSync +Vsync # 800x600 @ 70.00 Hz (GTF) hsync: 43.75 kHz; pclk: 45.50 MHz Modeline "800x600_70.00" 45.50 800 840 920 1040 600 601 604 625 -HSync +Vsync EndSection Section "Device" Identifier "Card0" Driver "nvidia" BoardName "nVidia GeForce FX5200" #Option "RenderAccel" "1" Option "ConnectedMonitor" "Monitor0" Option "MetaModes" "1280x1024_70.00" "800x600_70.00" Option "NoLogo" "1" # sw_cursor is needed for some ati and radeon cards #Option "sw_cursor" # Other options... #Option "hw_cursor" #Option "NoAccel" #Option "ShowCache" #Option "ShadowFB" #Option "UseFBDev" #Option "Rotate" # The following line is auto-generated by KNOPPIX mkxf86config #BusID "PCI:1:0:0" EndSection Section "Screen" Identifier "Screen0" Device "Card0" Monitor "Monitor0" DefaultColorDepth 24 SubSection "Display" Depth 24 Modes "1280x1024_70.00" "800x600_70.00" EndSubSection EndSection #Section "DRI" # Mode 0666 #EndSection |
Author: | mac [ Mon Mar 27, 2006 6:05 pm ] |
Post subject: | |
what was in /var/log/XFree86.0.log ? |
Author: | roe [ Tue Apr 04, 2006 4:45 am ] |
Post subject: | I had a similar issue |
I too had a hell of a time gettin X to run with my FX5200. My issue and apparently its not uncommon is a bad burn. With the image being as large as it is it seems to increase the failure rate, here is how I discovered my issue with the help of Xsecrets. the /usr/src/linux dir should have a complete source tree in it, mine only had like 6dirs, I tried to untar the /usr/src/kernel-source-2.6.15-chw-2 (or something like that) and the untarring returned "unexpected EOF" Once I slowe the burn down from 24x to 8x everything went in cleanly with no problems |
Page 1 of 1 | All times are UTC - 6 hours |
Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |