| LinHES Forums http://forums.linhes.org/ |
|
| Boot hangs on ivtv driver http://forums.linhes.org/viewtopic.php?f=1&t=945 |
Page 1 of 1 |
| Author: | aventius [ Mon Mar 08, 2004 5:46 pm ] |
| Post subject: | Boot hangs on ivtv driver |
I installed KnoppMyth (with TV-out at boot) using Auto Install. When I reboot without the cd, the boot process hangs. I can't even restart with CTRL-ALT-DEL. The last line shown before the system hangs is i2c-core.o: adaptor ivtv i2c driver #0 registered as adapter 0. Board: MSI K7D CPU: Dual AMD MP 2000+ Capture: Hauppage PVR-250 Output: PNY AGP 8x with VGA and S-Video Please advise.... |
|
| Author: | cesman [ Tue Mar 09, 2004 3:10 am ] |
| Post subject: | |
Is the card seated well? Do you have PnP turned off in the BIOS? Disconnted anything you may have attached to USB. |
|
| Author: | aventius [ Tue Mar 09, 2004 9:31 pm ] |
| Post subject: | Nope... |
I unplugged my usb mouse, turned off PnP and it still doesn't work. I also tried it on my PIII computer without success. Although when I take out the Hauppauge card, it DOES boot up. |
|
| Author: | cesman [ Tue Mar 09, 2004 9:45 pm ] |
| Post subject: | |
Can you specify and IRQ for the card in your BIOS? |
|
| Author: | aventius [ Thu Mar 11, 2004 5:18 am ] |
| Post subject: | |
I think i might be too much of a newbie. What do you mean by "specify and IRQ"??? |
|
| Author: | aventius [ Thu Mar 11, 2004 5:48 am ] |
| Post subject: | |
i'm beginning to think that I may have a card that is broken or damaged. |
|
| Author: | cesman [ Thu Mar 11, 2004 11:02 am ] |
| Post subject: | |
Instead of automicatically assigning and IRQ to the card specify one in the BIOS. |
|
| Author: | aventius [ Thu Mar 11, 2004 12:45 pm ] |
| Post subject: | |
Yes I can assign an IRQ but I don't know what I'm doing. Here's my setup... AGP Slot --- Video Card PCI-64 --- Open PCI-64 --- Open PCI-32 --- Open PCI-32 --- Lan PCI-32 --- Hauppauge PVR-250 Here's what my manual says about IRQ *** PCI Interrupt Request Routing PCI Slot 1 - INTA# - INTB# - INTC# - INTD# PCI Slot 2 - INTB# - INTC# - INTD# - INTA# PCI Slot 3 - INTA# - INTB# - INTC# - INTD# PCI Slot 4 - INTB# - INTC# - INTD# - INTA# PCI Slot 5 - INTC# - INTD# - INTA# - INTB# *** Reload Global Time Events IRQ3 ~ IRQ15 ---- Now how would I go about setting the IRQ for the card. Any help would be very much appreciated as I have no clue. |
|
| Author: | aventius [ Thu Mar 11, 2004 12:56 pm ] |
| Post subject: | |
Here's a link to some pictures of the available bios screens http://www.personal.psu.edu/users/d/l/d ... sktop.html |
|
| Author: | cesman [ Thu Mar 11, 2004 5:31 pm ] |
| Post subject: | |
Consult your motherboard manual on how to assign IRQ. Have you tried the card in a different slot? |
|
| Page 1 of 1 | All times are UTC - 6 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|