LinHES Forums http://forums.linhes.org/ |
|
PVR 350 problems R4V4.1 Install can't watch TV http://forums.linhes.org/viewtopic.php?f=10&t=2374 |
Page 1 of 1 |
Author: | LonelyOne [ Fri Sep 10, 2004 2:52 am ] |
Post subject: | PVR 350 problems R4V4.1 Install can't watch TV |
Thanks to the Admin of the forum Hi I searched in this Forum for Three Days and it won't work Please help me I've set the Settings for the PVR 350 but when I set a channel I can't see anything Can anyone post a example for the SettingsĀ“?? Please Please don't say search in Google or go to this site I want only a example for the Settings Sorry for my bad English !!! I'm German Thanks a lot LonelyOne My ivtv Code: alias char-major-81 videodev alias char-major-61 lirc_i2c options ivtv ivtv_debug=1 ivtv_pal=1 options tuner type=28 options msp3400 once=1 simple=1 options saa7127 enable_output=1 output_select=0 pal=1 #<- remove pal=1 for NTSC add below ivtv msp3400 saa7115 saa7127 tuner add above ivtv lirc_dev lirc_i2c ivtv-fb My XF86Config-4 Code: Section "ServerLayout"
Identifier "XFree86 Configured" Screen 0 "Screen0" 0 0 InputDevice "Keyboard0" "CoreKeyboard" InputDevice "USB Mouse" "CorePointer" # Serial Mouse not detected # USB Mouse not detected EndSection Section "ServerFlags" Option "AllowMouseOpenFail" "true" EndSection Section "Files" RgbPath "/usr/X11R6/lib/X11/rgb" ModulePath "/usr/X11R6/lib/modules" FontPath "/usr/X11R6/lib/X11/fonts/misc:unscaled" FontPath "/usr/X11R6/lib/X11/fonts/misc" FontPath "/usr/X11R6/lib/X11/fonts/75dpi:unscaled" FontPath "/usr/X11R6/lib/X11/fonts/75dpi" FontPath "/usr/X11R6/lib/X11/fonts/100dpi:unscaled" FontPath "/usr/X11R6/lib/X11/fonts/100dpi" FontPath "/usr/X11R6/lib/X11/fonts/Speedo" FontPath "/usr/X11R6/lib/X11/fonts/PEX" # Additional fonts: Locale, Gimp, TTF... FontPath "/usr/X11R6/lib/X11/fonts/cyrillic" # FontPath "/usr/X11R6/lib/X11/fonts/latin2/75dpi" # FontPath "/usr/X11R6/lib/X11/fonts/latin2/100dpi" # True type and type1 fonts are also handled via xftlib, see /etc/X11/XftConfig! FontPath "/usr/X11R6/lib/X11/fonts/Type1" FontPath "/usr/share/fonts/ttf/western" FontPath "/usr/share/fonts/ttf/decoratives" FontPath "/usr/share/fonts/truetype" FontPath "/usr/share/fonts/truetype/openoffice" FontPath "/usr/share/fonts/truetype/ttf-bitstream-vera" FontPath "/usr/share/fonts/latex-ttf-fonts" FontPath "/usr/X11R6/lib/X11/fonts/defoma/CID" FontPath "/usr/X11R6/lib/X11/fonts/defoma/TrueType" EndSection Section "Module" Load "ddc" # ddc probing of monitor # Load "GLcore" Load "dbe" Load "v4l" Load "extmod" Load "glx" Load "bitmap" # bitmap-fonts Load "speedo" Load "type1" Load "freetype" Load "record" EndSection Section "InputDevice" Identifier "Keyboard0" Driver "keyboard" Option "CoreKeyboard" Option "XkbRules" "xfree86" Option "XkbModel" "pc106" Option "XkbLayout" "de" EndSection Section "InputDevice" Identifier "Serial Mouse" Driver "mouse" Option "Protocol" "Microsoft" Option "Device" "/dev/ttyS0" Option "Emulate3Buttons" "true" Option "Emulate3Timeout" "70" Option "SendCoreEvents" "true" EndSection Section "InputDevice" Identifier "PS/2 Mouse" Driver "mouse" Option "Protocol" "auto" Option "ZAxisMapping" "4 5" Option "Device" "/dev/psaux" Option "Emulate3Buttons" "true" Option "Emulate3Timeout" "70" Option "SendCoreEvents" "true" EndSection Section "InputDevice" Identifier "USB Mouse" Driver "mouse" Option "Device" "/dev/input/mice" Option "SendCoreEvents" "true" Option "Protocol" "IMPS/2" Option "ZAxisMapping" "4 5" Option "Buttons" "5" EndSection # Auto-generated by KNOPPIX mkxf86config Section "Monitor" Identifier "Monitor0" Option "DPMS" "true" Option "TVStandard" "PAL-B" Option "ConnectedMonitor" "CRT" Option "TVOutFormat" "COMPOSITE" Option "NoLogo" "0" Option "TVOverScan" "1.0" VendorName "KDS" ModelName "KDS1983" HorizSync 30 - 50 # DDC-probed VertRefresh 60 # DDC-probed # These are the DDC-probed settings reported by your monitor. # 1600x1200, 75.0Hz; hfreq=93.75, vfreq=75.00 ModeLine "1600x1200" 202.50 1600 1664 1856 2160 1200 1201 1204 1250 +hsync +vsync # 1280x1024, 85.0Hz; hfreq=91.15, vfreq=85.02 ModeLine "1280x1024" 157.50 1280 1344 1504 1728 1024 1025 1028 1072 +hsync +vsync # 1152x864, 75.0Hz; hfreq=67.50, vfreq=75.00 ModeLine "1152x864" 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync # 1024x768, 85.0Hz; hfreq=68.68, vfreq=85.00 ModeLine "1024x768" 94.50 1024 1072 1168 1376 768 769 772 808 +hsync +vsync # 1024x768, 75.0Hz; hfreq=60.02, vfreq=75.03 ModeLine "1024x768" 78.75 1024 1040 1136 1312 768 769 772 800 +hsync +vsync # 1024x768, 70.0Hz; hfreq=56.48, vfreq=70.07 ModeLine "1024x768" 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync # 800x600, 85.0Hz; hfreq=53.67, vfreq=85.06 ModeLine "800x600" 56.25 800 832 896 1048 600 601 604 631 +hsync +vsync # 800x600, 75.0Hz; hfreq=46.88, vfreq=75.00 ModeLine "800x600" 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync # 800x600, 72.0Hz; hfreq=48.08, vfreq=72.19 ModeLine "800x600" 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync # 800x600, 60.0Hz; hfreq=37.88, vfreq=60.32 ModeLine "800x600" 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync # 640x480, 85.0Hz; hfreq=43.27, vfreq=85.01 ModeLine "640x480" 36.00 640 696 752 832 480 481 484 509 -hsync -vsync # 640x480, 75.0Hz; hfreq=37.50, vfreq=75.00 ModeLine "640x480" 31.50 640 656 720 840 480 481 484 500 -hsync -vsync # 640x480, 60.0Hz; hfreq=31.47, vfreq=59.94 ModeLine "640x480" 25.17 640 648 744 784 480 482 484 509 -hsync -vsync EndSection Section "Device" ### Available Driver options are:- # sw_cursor is needed for some ati and radeon cards Option "sw_cursor" #Option "hw_cursor" #Option "NoAccel" #Option "ShowCache" #Option "ShadowFB" #Option "UseFBDev" #Option "Rotate" Identifier "Card0" # The following line is auto-generated by KNOPPIX mkxf86config Driver "nvidia" VendorName "All" BoardName "All" # BusID "PCI:1:0:0" EndSection Section "Screen" Identifier "Screen0" Device "Card0" Monitor "Monitor0" DefaultColorDepth 16 SubSection "Display" Depth 1 Modes "800x600" "640x480" EndSubSection SubSection "Display" Depth 4 Modes "800x600" "640x480" EndSubSection SubSection "Display" Depth 8 Modes "800x600" "640x480" EndSubSection SubSection "Display" Depth 15 Modes "800x600" "640x480" EndSubSection SubSection "Display" Depth 16 Modes "800x600" "640x480" EndSubSection SubSection "Display" Depth 24 Modes "800x600" "640x480" EndSubSection SubSection "Display" Depth 32 Modes "800x600" "640x480" EndSubSection EndSection Section "DRI" Mode 0666 EndSection |
Author: | cesman [ Fri Sep 10, 2004 8:50 am ] |
Post subject: | |
If you're having problems with your 350 and need help, you should not post here. I deleted you previous post and will delete this one. |
Author: | kashmir [ Fri Sep 24, 2004 6:48 am ] |
Post subject: | |
I agree with LonelyOne that the pvr-350 is rather a tier-3. followed for 2 nights and days all the instructions out there. too many people out there for whom it didnt work. if it's a hardware issue, it should be pointed out here that the cards are not worth the many $$ you pay for them... now i am installing windows, just to see if the hardware is working at all |
Author: | Thermopyle [ Mon Oct 04, 2004 1:17 pm ] |
Post subject: | IVTV version not up to date |
Here's the problem. Hauppauge changes thier cards almost every time they do a production run. So a PVR350 from 6 months ago doesn't use the same tuner the new ones do. For those of you that don't know what IVTV is it's the opensource driver for pvr250s and pvr350s. What that means to us is that when a new card is released the opensource community has to spend a significant ammount of time getting the drivers to support the new cards (currently the community is basically one guy: Chris Kennedy). I, unfortunately, have one of the new prv350 cards and I've been struggling with it for a couple months. A friend of mine who is a seasoned MythTV guru spent 4 hours hammering away at it and was able to get clear reception for a couple seconds before crashing. Here's what we came up with. From a terminal window you can test the input by doing: Code: cat /dev/video0 > test.mpg (hit Ctrl-C after a few seconds to stop it) Code: mplayer test.mpg
If you see static then the tuner is not tuning properly. This is indicitive of ivtv not properly detecting your tuner type. The lastest drivers (at the time) were #114b 0.1.10-pre2. We installed these (with some effort) and were able to get it to tune properly but it would crash every time after about 1 or 2 seconds requiring a power down. This is to be expected as 114 is very early in the deveolpment cycle. Based on prior experience 114 should be pretty solid in a couple weeks but for now it's pretty much totally unstable. Long story short we're all SOL until Chris can get it done. You can follow his progress at: http://www.poptix.net/ivtv/ |
Author: | Human [ Tue Oct 12, 2004 12:36 pm ] |
Post subject: | something that may help |
I'm using R4V5 (MythTV 0.16) and I've gotten a lot of extra stability with my PVR-350 by turning commercial flagging off. I'm using ivtv 0.1.9a with the latest Hauppage firmware and ivtvdev as my XWindows driver. Perhaps that combination of things will help give you extra stability, too. My tuner type is 39, incidentally. As for the original German poster, feel free to contact me directly in German if you're having trouble with English. Lange her hab' ich fliessend Deutsch gesprochen, aber hoffentlich weiss ich noch genug, Sie zu helfen |
Author: | Thermopyle [ Thu Dec 02, 2004 11:52 am ] |
Post subject: | Possible fix for New PVR350 cards |
I'm going to be trying this out within the week. I'll keep everyone posted but I'm guessing this is the fix I've been looking for. BTW Chris is DA MAN! [url]http://205.209.168.201/~ckennedy/ivtv/new_tuners/[/url] |
Author: | Thermopyle [ Sun Jan 02, 2005 11:40 am ] |
Post subject: | V is for Victory |
OK OK it's been more than a week. We've had to change kernels and recompile with the new tuner mod, but we finally got it working. I suggest we move the PVR-350 to tier 2. Addendum: I would not recommend using knoppmyth with a new PVR 350, but if you're knee deep in it and want to try to do everything in debian (limited user support for ivtv and myth) I'm here to tell you it is possible but not a road I'd take again. Hindsight's 20-20 but if I had it to do over again I would have struggled through FC2. |
Page 1 of 1 | All times are UTC - 6 hours |
Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |