View unanswered posts    View active topics

All times are UTC - 6 hours





Post new topic Reply to topic  [ 24 posts ] 
Go to page Previous  1, 2

Print view Previous topic   Next topic  
Author Message
Search for:
 Post subject:
PostPosted: Tue Jun 12, 2007 5:45 pm 
Offline
Joined: Sat Sep 16, 2006 8:08 am
Posts: 71
Cool, I have the Hauppage remote for myth, so it should work out the same for me.


Top
 Profile  
 
 Post subject:
PostPosted: Wed Jun 13, 2007 7:37 am 
Offline
Joined: Fri Nov 18, 2005 9:22 am
Posts: 777
Location: spencerport, ny (USA)
donjski wrote:
Cool, I have the Hauppage remote for myth, so it should work out the same for me.

Should work, and the Harmony will probably be able to figure it out quickly. Worst-case, you have to learn all of the buttons.


Top
 Profile  
 
 Post subject:
PostPosted: Mon Jan 19, 2009 7:03 pm 
Offline
Joined: Sat Sep 16, 2006 8:08 am
Posts: 71
Hi again,

I'm posting here cause I have just upgraded to 5.5 and have some questions about what i did in the past.

I am currently using 1080i rather than 720p this time. Below is my config.

the 3 problems that I am having are:

1.when in setup on the frontend, i see a bit of flickering

2. when in the main menu, if i go up or down to switch between options, they disappear until I come back to the main menu, This does not happen in any other menus.

3. the time and date at the top of the menu looks like this when the hour goes to double digits Mon Jan 19, 1.... one being `12

I am using the Neon Wide theme. Same TV as in the earlier post.

Code:
Section "ServerLayout"
   Identifier     "XFree86 Configured"
   Screen      0  "Screen0" 0 0
   InputDevice    "Keyboard0" "CoreKeyboard"
# PS/2 Mouse not detected
# Serial Mouse not detected
        InputDevice    "USB Mouse" "CorePointer"
EndSection

Section "ServerFlags"
   Option "AllowMouseOpenFail"  "true"
   
EndSection

Section "Files"
   RgbPath      "/usr/share/X11/rgb"
   ModulePath   "/usr/lib/xorg/modules"
   FontPath     "/usr/share/fonts/X11/misc:unscaled"
   FontPath     "/usr/share/fonts/X11/75dpi:unscaled"
   FontPath     "/usr/share/fonts/X11/100dpi:unscaled"
   FontPath     "/usr/share/fonts/X11/Type1"
   FontPath     "/usr/share/fonts/X11/Speedo"
   FontPath     "/usr/share/fonts/X11/PEX"
# Additional fonts: Locale, Gimp, TTF...
   FontPath     "/usr/share/fonts/X11/cyrillic"
#   FontPath     "/usr/share/fonts/X11/latin2/75dpi"
#   FontPath     "/usr/share/fonts/X11/latin2/100dpi"
# True type and type1 fonts are also handled via xftlib, see /etc/X11/XftConfig!
   FontPath     "/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType"
   FontPath     "/usr/share/fonts/truetype"
   FontPath     "/usr/share/fonts/latex-ttf-fonts"
EndSection

Section "Module"
# Comments: see http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=346408
   Load  "dbe" # Double Buffering Extension, very important.
#   Load  "dri" # This shouldn't be available choice if user has selected driver vga, vesa or nv.
   Load  "glx" # GLX Extension.
   Load  "freetype" # Freetype fonts.
   Load  "type1"  # Type 1 fonts
   Load  "record" # Developer extension, usually not needed
#   Load  "extmod" # This is okay, but if you look into "man xorg.conf" you'll find option NOT to include DGA extension with extmod, and for a good reason.. DGA causes instability as it access videoram without consulting X about it.
   SubSection      "extmod"
      Option          "omit xfree86-dga"
   EndSubSection
#   Load  "speedo" # Speedo fonts, this module doesn't exist in Xorg 7.0.17
# The following are deprecated/unstable/unneeded in Xorg 7.0
#       Load  "ddc"  # ddc probing of monitor, this should be never present, as it gets automatically loaded.
#   Load  "GLcore" # This should be never present, as it gets automatically loaded.
#       Load  "bitmap" # Should be never present, as it gets automatically loaded. This is a font module, and loading it in xorg.conf makes X try to load it twice.
EndSection

Section "InputDevice"
   Identifier  "Keyboard0"
   Driver      "kbd"
        Option      "CoreKeyboard"
   Option "XkbRules" "xorg"
   Option "XkbModel" "pc105"
   Option "XkbLayout" "us"

EndSection

Section "InputDevice"
   Identifier  "Serial Mouse"
   Driver      "mouse"
   Option      "Protocol" "Microsoft"
   Option      "Device" "/dev/ttyS0"
   Option      "Emulate3Buttons" "true"
   Option      "Emulate3Timeout" "70"
   Option       "SendCoreEvents"  "true"
EndSection

Section "InputDevice"
   Identifier  "PS/2 Mouse"
   Driver      "mouse"
   Option      "Protocol" "auto"
Option          "ZAxisMapping"          "4 5"
   Option      "Device" "/dev/psaux"
   Option      "Emulate3Buttons" "true"
   Option      "Emulate3Timeout" "70"
   Option       "SendCoreEvents"  "true"
EndSection

Section "InputDevice"
        Identifier      "USB Mouse"
        Driver          "mouse"
        Option          "Device"                "/dev/input/mice"
   Option      "SendCoreEvents"   "true"
        Option          "Protocol"              "IMPS/2"
        Option          "ZAxisMapping"          "4 5"
        Option          "Buttons"               "5"
EndSection

# Auto-generated by KNOPPIX mkxf86config

Section "Monitor"
   Identifier   "Monitor0"
   Option   "DPMS"   "true"
   Option "UseEdidDpi" "FALSE"
   Option "DPI" "100 x 100"
   VendorName   "TVT"
   ModelName   "TVT0000"
#   HorizSync    28.0 - 78.0 # Warning: This may fry very old Monitors
   HorizSync    28.0 - 96.0 # Warning: This may fry old Monitors
   VertRefresh 50 - 75 # DDC-probed
   # These are the DDC-probed settings reported by your monitor.
   # 1280x1024, 75.0Hz; hfreq=79.98, vfreq=75.03
   ModeLine "1280x1024"   135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync
   # 1152x864, 75.0Hz; hfreq=67.50, vfreq=75.00
   ModeLine "1152x864"   108.00 1152 1216 1344 1600  864  865  868  900 +hsync +vsync
   # 1024x768, 75.0Hz; hfreq=60.02, vfreq=75.03
   ModeLine "1024x768"    78.75 1024 1040 1136 1312  768  769  772  800 +hsync +vsync
   # 1024x768, 70.0Hz; hfreq=56.48, vfreq=70.07
   ModeLine "1024x768"    75.00 1024 1048 1184 1328  768  771  777  806 -hsync -vsync
   # 1024x768, 70.0Hz; hfreq=56.48, vfreq=70.07
   ModeLine "1024x768"    75.00 1024 1048 1184 1328  768  771  777  806 -hsync -vsync
   # 800x600, 75.0Hz; hfreq=46.88, vfreq=75.00
   ModeLine "800x600"    49.50  800  816  896 1056  600  601  604  625 +hsync +vsync
   # 800x600, 72.0Hz; hfreq=48.08, vfreq=72.19
   ModeLine "800x600"    50.00  800  856  976 1040  600  637  643  666 +hsync +vsync
   # 800x600, 72.0Hz; hfreq=48.08, vfreq=72.19
   ModeLine "800x600"    50.00  800  856  976 1040  600  637  643  666 +hsync +vsync
   # 800x600, 60.0Hz; hfreq=37.88, vfreq=60.32
   ModeLine "800x600"    40.00  800  840  968 1056  600  601  605  628 +hsync +vsync
   # 640x480, 75.0Hz; hfreq=37.50, vfreq=75.00
   ModeLine "640x480"    31.50  640  656  720  840  480  481  484  500 -hsync -vsync
   # 640x480, 72.0Hz; hfreq=37.86, vfreq=72.81
   ModeLine "640x480"    31.50  640  656  696  816  480  481  484  504 -hsync -vsync
   # 640x480, 60.0Hz; hfreq=31.47, vfreq=59.94
   ModeLine "640x480"    25.17  640  648  744  784  480  482  484  509 -hsync -vsync
   # Extended modelines with GTF timings
   # 640x480 @ 100.00 Hz (GTF) hsync: 50.90 kHz; pclk: 43.16 MHz
   ModeLine "640x480"  43.16  640 680 744 848  480 481 484 509  -HSync +Vsync
   # 768x576 @ 60.00 Hz (GTF) hsync: 35.82 kHz; pclk: 34.96 MHz
   ModeLine "768x576"  34.96  768 792 872 976  576 577 580 597  -HSync +Vsync
   # 768x576 @ 72.00 Hz (GTF) hsync: 43.27 kHz; pclk: 42.93 MHz
   ModeLine "768x576"  42.93  768 800 880 992  576 577 580 601  -HSync +Vsync
   # 768x576 @ 75.00 Hz (GTF) hsync: 45.15 kHz; pclk: 45.51 MHz
   ModeLine "768x576"  45.51  768 808 888 1008  576 577 580 602  -HSync +Vsync
   # 768x576 @ 85.00 Hz (GTF) hsync: 51.42 kHz; pclk: 51.84 MHz
   ModeLine "768x576"  51.84  768 808 888 1008  576 577 580 605  -HSync +Vsync
   # 768x576 @ 100.00 Hz (GTF) hsync: 61.10 kHz; pclk: 62.57 MHz
   ModeLine "768x576"  62.57  768 816 896 1024  576 577 580 611  -HSync +Vsync
   # 800x600 @ 100.00 Hz (GTF) hsync: 63.60 kHz; pclk: 68.18 MHz
   ModeLine "800x600"  68.18  800 848 936 1072  600 601 604 636  -HSync +Vsync
   # 1024x768 @ 100.00 Hz (GTF) hsync: 81.40 kHz; pclk: 113.31 MHz
   ModeLine "1024x768"  113.31  1024 1096 1208 1392  768 769 772 814  -HSync +Vsync
   # 1152x864 @ 60.00 Hz (GTF) hsync: 53.70 kHz; pclk: 81.62 MHz
   ModeLine "1152x864"  81.62  1152 1216 1336 1520  864 865 868 895  -HSync +Vsync
   # 1152x864 @ 85.00 Hz (GTF) hsync: 77.10 kHz; pclk: 119.65 MHz
   ModeLine "1152x864"  119.65  1152 1224 1352 1552  864 865 868 907  -HSync +Vsync
   # 1152x864 @ 100.00 Hz (GTF) hsync: 91.50 kHz; pclk: 143.47 MHz
   ModeLine "1152x864"  143.47  1152 1232 1360 1568  864 865 868 915  -HSync +Vsync
   # 1280x960 @ 72.00 Hz (GTF) hsync: 72.07 kHz; pclk: 124.54 MHz
   ModeLine "1280x960"  124.54  1280 1368 1504 1728  960 961 964 1001  -HSync +Vsync
   # 1280x960 @ 75.00 Hz (GTF) hsync: 75.15 kHz; pclk: 129.86 MHz
   ModeLine "1280x960"  129.86  1280 1368 1504 1728  960 961 964 1002  -HSync +Vsync
   # 1280x960 @ 100.00 Hz (GTF) hsync: 101.70 kHz; pclk: 178.99 MHz
   ModeLine "1280x960"  178.99  1280 1376 1520 1760  960 961 964 1017  -HSync +Vsync
   # 1280x1024 @ 100.00 Hz (GTF) hsync: 108.50 kHz; pclk: 190.96 MHz
   ModeLine "1280x1024"  190.96  1280 1376 1520 1760  1024 1025 1028 1085  -HSync +Vsync
   # 1400x1050 @ 60.00 Hz (GTF) hsync: 65.22 kHz; pclk: 122.61 MHz
   ModeLine "1400x1050"  122.61  1400 1488 1640 1880  1050 1051 1054 1087  -HSync +Vsync
   # 1400x1050 @ 72.00 Hz (GTF) hsync: 78.77 kHz; pclk: 149.34 MHz
   ModeLine "1400x1050"  149.34  1400 1496 1648 1896  1050 1051 1054 1094  -HSync +Vsync
   # 1400x1050 @ 75.00 Hz (GTF) hsync: 82.20 kHz; pclk: 155.85 MHz
   ModeLine "1400x1050"  155.85  1400 1496 1648 1896  1050 1051 1054 1096  -HSync +Vsync
   # 1400x1050 @ 85.00 Hz (GTF) hsync: 93.76 kHz; pclk: 179.26 MHz
   ModeLine "1400x1050"  179.26  1400 1504 1656 1912  1050 1051 1054 1103  -HSync +Vsync
   # 1400x1050 @ 100.00 Hz (GTF) hsync: 111.20 kHz; pclk: 214.39 MHz
   ModeLine "1400x1050"  214.39  1400 1512 1664 1928  1050 1051 1054 1112  -HSync +Vsync
   # 1600x1200 @ 100.00 Hz (GTF) hsync: 127.10 kHz; pclk: 280.64 MHz
   ModeLine "1600x1200"  280.64  1600 1728 1904 2208  1200 1201 1204 1271  -HSync +Vsync
   # 1680x1050 (Notebook)
   ModeLine "1680x1050" 154.2 1680 1712 2296 2328   1050 1071 1081 1103
   # 1920x1200 @ 60.00 Hz (GTF)  hsync: 74.52; pclk: 193.16 MHz
   ModeLine "1920x1200" 193.16  1920 2048 2256 2592  1200 1201 1204 1242  -HSync +HSync
   ModeLine "ATSC-720-59.94p" 74.1 1280 1320 1376 1648 720 722 728 750
       ModeLine "ATSC-1080-59.94i" 74.2 1920 1960 2016 2200 1080 1082 1088 1125 interlace
EndSection

Section "Device"
   ### Available Driver options are:-
# sw_cursor is needed for some ati and radeon cards
        #Option     "sw_cursor"
        #Option     "hw_cursor"
        #Option     "NoAccel"
        #Option     "ShowCache"
        #Option     "ShadowFB"
        #Option     "UseFBDev"
        #Option     "Rotate"
   Identifier  "Card0"
# The following line is auto-generated by KNOPPIX mkxf86config
   Driver      "nvidia"
   Option "XvmcUsesTextures" "false"
   Option "UseEvents" "true"
   VendorName  "All"
   BoardName   "All"
#   BusID       "PCI:1:0:0"
EndSection

Section "Screen"
   Identifier "Screen0"
   Device     "Card0"
   Monitor    "Monitor0"
   DefaultColorDepth 24
   SubSection "Display"
      Depth     1
      Modes "1280x1024" "1152x864" "1024x768" "800x600" "640x480"
   EndSubSection
   SubSection "Display"
      Depth     4
      Modes "1280x1024" "1152x864" "1024x768" "800x600" "640x480"
   EndSubSection
   SubSection "Display"
      Depth     8
      Modes "1280x1024" "1152x864" "1024x768" "800x600" "640x480"
   EndSubSection
   SubSection "Display"
      Depth     15
      Modes "1280x1024" "1152x864" "1024x768" "800x600" "640x480"
   EndSubSection
   SubSection "Display"
      Depth     16
      Modes "1280x1024" "1152x864" "1024x768" "800x600" "640x480"
   EndSubSection
#   SubSection "Display"
#      Depth     24
#      Modes "1280x1024" "1152x864" "1024x768" "800x600" "640x480"
#   EndSubSection
   SubSection "Display"
      Depth     32
      Modes "1280x1024" "1152x864" "1024x768" "800x600" "640x480"
   EndSubSection
   SubSection     "Display"
      Depth       24
      Modes       "ATSC-1080-59.94i"
   EndSubSection   
EndSection

Section "DRI"
   Mode 0666
EndSection




Top
 Profile  
 
 Post subject:
PostPosted: Wed Jan 21, 2009 8:10 pm 
Offline
Joined: Sat Sep 16, 2006 8:08 am
Posts: 71
anyone?


Top
 Profile  
 
 Post subject:
PostPosted: Thu Jan 22, 2009 9:53 am 
Offline
Joined: Tue May 09, 2006 11:50 am
Posts: 102
Not sure that this is it, but try disabling opengl for your menus. This sounds like a strange page flip thing.

If that works, and you'd like to re-enable openGL, post back here, I think I can give you an xorg.conf option that will fix it.


Top
 Profile  
 
 Post subject:
PostPosted: Thu Jan 22, 2009 5:41 pm 
Offline
Joined: Sat Sep 16, 2006 8:08 am
Posts: 71
I can't seem to find where the open gl flag is.


Top
 Profile  
 
 Post subject:
PostPosted: Fri Jan 23, 2009 9:56 am 
Offline
Joined: Tue May 09, 2006 11:50 am
Posts: 102
You don't have to leave the frontend, its a checkbox in the appearance options. I'll walk through it tonight and repost here.


Top
 Profile  
 
 Post subject:
PostPosted: Sat Jan 24, 2009 1:14 pm 
Offline
Joined: Sat Sep 16, 2006 8:08 am
Posts: 71
Thanks, pilesofspam.

I looked all over the frontend, and could not locate it. I do remember turning it on though. But for some reason, the menu is no longer disappearing. Go figure...I would like to make sure that it is on or off though.


Top
 Profile  
 
 Post subject:
PostPosted: Sat Jan 24, 2009 6:00 pm 
Offline
Joined: Thu Mar 25, 2004 11:00 am
Posts: 9551
Location: Arlington, MA
Search for posts by me that mention "settings.sh" and "gl".


Top
 Profile  
 

Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 24 posts ] 
Go to page Previous  1, 2



All times are UTC - 6 hours




Who is online

Users browsing this forum: No registered users and 19 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Jump to:  
cron
Powered by phpBB® Forum Software © phpBB Group

Theme Created By ceyhansuyu