View unanswered posts    View active topics

All times are UTC - 6 hours





Post new topic Reply to topic  [ 6 posts ] 
Print view Previous topic   Next topic  
Author Message
Search for:
PostPosted: Wed Mar 16, 2011 5:50 pm 
Offline
Joined: Thu Mar 25, 2004 11:00 am
Posts: 9551
Location: Arlington, MA
FYA...

I was trying to check how much using hardware acceleration affected the CPU load while playing back flash videos the other day, and the results from top were puzzling and counterintuitive. So I repeated the experiments, did the tests in different orders and got the same odd results. For several of the less demanding videos, top was consistently showing a higher % CPU usage.

This was a real head scratcher, until the light dawned when I popped up the KSensors tool to check the CPU temperatures, and noticed that the CPU was only running at 1Ghz... Duh-oh! Basically the CPU load during playback was low enough that the Cool & Quiet support had throttled the clock, resulting in a higher % busy and an odd jump in my measurements.

:oops:


Top
 Profile  
 
 Post subject:
PostPosted: Thu Mar 17, 2011 7:14 am 
Offline
Joined: Thu Mar 02, 2006 5:42 pm
Posts: 410
Location: middleton wi usa atsc
Did the Cool & Quiet frequency reduction affect playback or just the top readings?

Out of curiosity what was the mobo, cpu and graphics card in use?
Thanks.


Top
 Profile  
 
 Post subject:
PostPosted: Thu Mar 17, 2011 9:05 pm 
Offline
Joined: Thu Mar 25, 2004 11:00 am
Posts: 9551
Location: Arlington, MA
Oh, it all kept working just fine, the cool & quiet did it's job without a blip. It just changed the basis of my % CPU usage measurements and confused the heck out of me. The moral of the story was just to make sure that you know what you're measuring, a given % of 2200Mhz is different than the same % of 1000Mhz. ;-)

To satisfy your curiosity the WS box specs are currently:

mobo - Asus A8N-SLI
cpu - Athlon 64 X2 4200+
gpu - GeForce GT 430 (GF108)


Top
 Profile  
 
 Post subject:
PostPosted: Fri Mar 18, 2011 9:37 pm 
Offline
Joined: Tue Aug 15, 2006 11:14 am
Posts: 1343
Location: Orlando FL
I've noticed that my video hangs slightly when the CPU fan spools up or down. Anyone else?

_________________
My System


Top
 Profile  
 
 Post subject:
PostPosted: Sun Mar 20, 2011 3:24 am 
Offline
Joined: Tue Jan 18, 2005 2:07 am
Posts: 1532
Location: California
tjc wrote:
mobo - Asus A8N-SLI
cpu - Athlon 64 X2 4200+
gpu - GeForce GT 430 (GF108)


TJC, do you have a kill-a-watt type measurement of how much power the box draws, both idle and under load? THanks!

_________________
Marc

The views expressed are my own and do not necessarily reflect the views of my employer.


Top
 Profile  
 
 Post subject:
PostPosted: Sun Mar 20, 2011 9:13 am 
Offline
Joined: Thu Mar 25, 2004 11:00 am
Posts: 9551
Location: Arlington, MA
Nope, but I doubt it's as power efficient as a more modern machine would be.

It's at least 4 years old now, probably closer to 5, and while it was built and subsequently modded to run cool and keep the noise level low, minimizing it's power consumption was only pursued as a means to those ends.

It's an 89w processor, there are a couple sticks of fast RAM, a 49W GPU, 3 120mm fans (including the PS) and 1 92mm, a recent WD 320Gb "blue" series drive, and a 430W PS that dates from before the era of 80+ efficiency ratings.

Power consumption will be a bigger focus when I eventually update or replace it.


Top
 Profile  
 

Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 6 posts ] 


All times are UTC - 6 hours




Who is online

Users browsing this forum: No registered users and 16 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Jump to:  
cron
Powered by phpBB® Forum Software © phpBB Group

Theme Created By ceyhansuyu