LinHES Forums • View topic - Upgraded to ivtv-pre2-ck-100z ? Need help please

Board index Linux Installation

All times are UTC - 6 hours

Upgraded to ivtv-pre2-ck-100z ? Need help please

Page 1 of 1

[ 9 posts ]

Print view

Previous topic Next topic

Author

Message

mythdude350

Post subject: Upgraded to ivtv-pre2-ck-100z ? Need help please

Posted: Mon Oct 11, 2004 8:52 pm

Joined: Tue Oct 05, 2004 2:30 am

Posts: 24

If you did the ivtv upgrade from 0.1.9 in R4V5 to 0.1.10-pre2-ck-100z then can you please post your XF86Config-4 and modules/ivtv file here? My config is off somewhere and can't seem to figure out where. I am using pvr-350 tv out so the X-config is critical.

Thanks

Top

wrooster

Post subject:

Posted: Mon Oct 11, 2004 11:19 pm

Joined: Thu Feb 19, 2004 6:52 pm

Posts: 117

R4V5 install w/PVR350 NTSC format with composite IN and OUT

Code:

jds@mythtv:/etc/modutils $ uname -a
Linux mythtv 2.4.25-chw #1 Sat Apr 10 15:46:31 PDT 2004 i686 GNU/Linux

Code:

jds@mythtv:/etc/modutils $ lspci | grep iTV
02:09.0 Multimedia video controller: Internext Compression Inc iTVC15 MPEG-2 Encoder (rev 01)

Code:

jds@mythtv:/etc/modutils $ cat /etc/mythtv/modules/ivtv
alias char-major-61 lirc_i2c
alias char-major-81 videodev
# alias char-major-81-0 ivtv
options ivtv debug=1
options tuner type=2
options saa7127 enable_output=1 output_select=0
options msp3400 once=1 simple=1
add below ivtv msp3400 saa7115 saa7127 tuner
add above ivtv lirc_dev lirc_i2c ivtv-fb

Code:

jds@mythtv:/etc/X11 $ cat XF86Config-4 | manual_editor

Section "ServerLayout"
         Identifier     "XFree86 Configured"
         Screen  0 "TV Screen"
         InputDevice    "PS/2 Mouse" "CorePointer"
         InputDevice    "Keyboard0" "CoreKeyboard"
EndSection

< snip / a lot of misc generic stuff >

Section "Device"
        Identifier  "Hauppauge PVR 350 iTVC15 Framebuffer"
        # Driver      "fbdev"
        Driver      "ivtvdev"

        ### change fb1 to whatever number you got in the previous section
        # Option      "fbdev" "/dev/fb1"
        Option      "fbdev" "/dev/fb1"

        ### change the busid to whatever is reported by lspci. Note that
        ### output of lspci is hex, so add a preceding "0x" to the BusID
        BusID "2:0x09:0"
EndSection

Section "Screen"
        Identifier  "TV Screen"
        Device      "Hauppauge PVR 350 iTVC15 Framebuffer"
        Monitor     "NTSC Monitor"
        DefaultDepth 24
        DefaultFbbpp 32
        Subsection "Display"
          Depth 24
          FbBpp 32
          Modes "720x480"
        EndSubsection
EndSection

Code:

jds@mythtv:~ $ ls -sl /dev/fb[0-1]*
   0 crw--w--w-    1 root     tty       29,   0 Apr 14  2001 /dev/fb0
   0 crw--w--w-    1 root     tty       29,   0 Apr 14  2001 /dev/fb0current
   0 crw-rw-rw-    1 mythtv   root      29,   1 Oct 10 11:16 /dev/fb1
   0 crw-rw-rw-    1 root     tty       29,  33 Apr 14  2001 /dev/fb1autodetect
   0 crw-rw-rw-    1 root     tty       29,  32 Apr 14  2001 /dev/fb1current

Code:

jds@mythtv:/etc/X11 $ find /usr -name "ivtvdev*" -print
/usr/X11R6/lib/modules/drivers/ivtvdev_drv.o
jds@mythtv:/etc/X11 $ cksum /usr/X11R6/lib/modules/drivers/ivtvdev_drv.o
4253674261 17902 /usr/X11R6/lib/modules/drivers/ivtvdev_drv.o

Code:

jds@mythtv:/etc/X11 $ lsmod
Module                  Size  Used by    Not tainted
lirc_i2c                4448   1 (autoclean)
lirc_dev                8592   1 (autoclean) [lirc_i2c]
ivtv-fb                19536   1 (autoclean)
tveeprom                6016   0 (autoclean) (unused)
ivtv                  773888   4 (autoclean) [ivtv-fb]
msp3400                20224   1 (autoclean)
saa7115                 7776   0 (autoclean) (unused)
saa7127                 8132   0 (autoclean) (unused)
tuner                  12712   1 (autoclean)
i2c-algo-bit            7048   1 (autoclean) [ivtv]
i2c-core               12452   0 (autoclean) [lirc_i2c tveeprom msp3400 saa7115
saa7127 tuner i2c-algo-bit]
videodev                6016   9 (autoclean) [ivtv]
ledxmit_serial          7328   0
ledxmit_dev             8784   1 [ledxmit_serial]
autofs4                 9332   0 (unused)
af_packet              14632   0 (unused)
snd-mixer-oss          11640   0
snd-intel8x0           17636   0
snd-pcm                56000   0 [snd-intel8x0]
snd-timer              14088   0 [snd-pcm]
snd-ac97-codec         32832   0 [snd-intel8x0]
snd-page-alloc          4316   0 [snd-intel8x0 snd-pcm]
snd-mpu401-uart         3168   0 [snd-intel8x0]
snd-rawmidi            13088   0 [snd-mpu401-uart]
snd-seq-device          3824   0 [snd-rawmidi]
snd                    27940   0 [snd-mixer-oss snd-intel8x0 snd-pcm snd-timer s
nd-ac97-codec snd-mpu401-uart snd-rawmidi snd-seq-device]
soundcore               3524   1 [snd]
agpgart                42852   0 (unused)
eepro100               19412   1
mii                     2176   0 [eepro100]
hw_random               2680   0 (unused)
serial                 44708   0
usb-uhci               22960   0 (unused)
usbcore                59980   0 [usb-uhci]
rtc                     7432   0
ext3                   65604   2
jbd                    47952   2 [ext3]

Code:

Oct 10 15:31:46 mythtv syslogd 1.4.1#10: restart.
Oct 10 15:31:46 mythtv kernel: klogd 1.4.1#10, log source = /proc/kmsg started.
Oct 10 15:31:46 mythtv kernel: Inspecting /boot/System.map-2.4.25-chw
Oct 10 15:31:46 mythtv kernel: Loaded 18648 symbols from /boot/System.map-2.4.25-chw.
Oct 10 15:31:46 mythtv kernel: Symbols match kernel version 2.4.25.
Oct 10 15:31:46 mythtv kernel: Loaded 522 symbols from 25 modules.
Oct 10 15:31:46 mythtv kernel: Linux version 2.4.25-chw (root@km_dev.mysettopbox.tv) (gcc version 3.3.2 20030812 (Debian prerelease)) #1 Sat Apr 10 15:46:31 PDT 2004
Oct 10 15:31:46 mythtv kernel: BIOS-provided physical RAM map:
Oct 10 15:31:46 mythtv kernel:  BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
Oct 10 15:31:46 mythtv kernel:  BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
Oct 10 15:31:46 mythtv kernel:  BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
Oct 10 15:31:46 mythtv kernel:  BIOS-e820: 0000000000100000 - 000000001ffd0000 (usable)
Oct 10 15:31:46 mythtv kernel:  BIOS-e820: 000000001ffd0000 - 000000001fff0000 (ACPI NVS)
Oct 10 15:31:46 mythtv kernel:  BIOS-e820: 000000001fff0000 - 0000000020000000 (usable)
Oct 10 15:31:46 mythtv kernel:  BIOS-e820: 00000000feea0000 - 0000000100000000 (reserved)
Oct 10 15:31:46 mythtv kernel: 0MB HIGHMEM available.
Oct 10 15:31:46 mythtv kernel: 512MB LOWMEM available.
Oct 10 15:31:46 mythtv kernel: On node 0 totalpages: 131072
Oct 10 15:31:46 mythtv kernel: zone(0): 4096 pages.
Oct 10 15:31:46 mythtv kernel: zone(1): 126976 pages.
Oct 10 15:31:46 mythtv kernel: zone(2): 0 pages.
Oct 10 15:31:46 mythtv kernel: Kernel command line: auto BOOT_IMAGE=Linux ro root=301 hda=scsi hdb=scsi hdc=scsi hdd=scsi hde=scsi hdf=scsi hdg=scsi hdh=scsi apm=power-off nomce
Oct 10 15:31:46 mythtv kernel: ide_setup: hda=scsi
Oct 10 15:31:46 mythtv kernel: ide_setup: hdb=scsi
Oct 10 15:31:46 mythtv kernel: ide_setup: hdc=scsi
Oct 10 15:31:46 mythtv kernel: ide_setup: hdd=scsi
Oct 10 15:31:46 mythtv kernel: ide_setup: hde=scsi
Oct 10 15:31:46 mythtv kernel: ide_setup: hdf=scsi
Oct 10 15:31:46 mythtv kernel: ide_setup: hdg=scsi
Oct 10 15:31:46 mythtv kernel: ide_setup: hdh=scsi
Oct 10 15:31:46 mythtv kernel: Initializing CPU#0
Oct 10 15:31:46 mythtv kernel: Detected 863.877 MHz processor.
Oct 10 15:31:46 mythtv kernel: Console: colour dummy device 80x25
Oct 10 15:31:46 mythtv kernel: Calibrating delay loop... 1723.59 BogoMIPS
Oct 10 15:31:46 mythtv kernel: Memory: 515200k/524288k available (1363k kernel code, 8572k reserved, 490k data, 116k init, 0k highmem)
Oct 10 15:31:46 mythtv kernel: Dentry cache hash table entries: 65536 (order: 7, 524288 bytes)
Oct 10 15:31:46 mythtv kernel: Inode cache hash table entries: 32768 (order: 6, 262144 bytes)
Oct 10 15:31:46 mythtv kernel: Mount cache hash table entries: 512 (order: 0, 4096 bytes)
Oct 10 15:31:46 mythtv kernel: Buffer cache hash table entries: 32768 (order: 5, 131072 bytes)
Oct 10 15:31:46 mythtv kernel: Page-cache hash table entries: 131072 (order: 7, 524288 bytes)
Oct 10 15:31:46 mythtv kernel: CPU: L1 I cache: 16K, L1 D cache: 16K
Oct 10 15:31:46 mythtv kernel: CPU: L2 cache: 256K
Oct 10 15:31:46 mythtv kernel: CPU: Intel Pentium III (Coppermine) stepping 06
Oct 10 15:31:46 mythtv kernel: Enabling fast FPU save and restore... done.
Oct 10 15:31:46 mythtv kernel: Enabling unmasked SIMD FPU exception support... done.
Oct 10 15:31:46 mythtv kernel: Checking 'hlt' instruction... OK.
Oct 10 15:31:46 mythtv kernel: POSIX conformance testing by UNIFIX
Oct 10 15:31:46 mythtv kernel: mtrr: v1.40 (20010327) Richard Gooch (rgooch@atnf.csiro.au)
Oct 10 15:31:46 mythtv kernel: mtrr: detected mtrr type: Intel
Oct 10 15:31:46 mythtv kernel: PCI: PCI BIOS revision 2.10 entry at 0xe838d, last bus=2
Oct 10 15:31:46 mythtv kernel: PCI: Using configuration type 1
Oct 10 15:31:46 mythtv kernel: PCI: Probing PCI hardware
Oct 10 15:31:46 mythtv kernel: PCI: Probing PCI hardware (bus 00)
Oct 10 15:31:46 mythtv kernel: Transparent bridge - Intel Corp. 82801BA/CA/DB/EB PCI Bridge
Oct 10 15:31:46 mythtv kernel: PCI: Using IRQ router PIIX/ICH [8086/2440] at 00:1f.0
Oct 10 15:31:46 mythtv kernel: isapnp: Scanning for PnP cards...
Oct 10 15:31:46 mythtv kernel: isapnp: No Plug & Play device found
Oct 10 15:31:46 mythtv kernel: Linux NET4.0 for Linux 2.4
Oct 10 15:31:46 mythtv kernel: Based upon Swansea University Computer Society NET3.039
Oct 10 15:31:46 mythtv kernel: Initializing RT netlink socket
Oct 10 15:31:46 mythtv kernel: Starting kswapd
Oct 10 15:31:46 mythtv kernel: VFS: Disk quotas vdquot_6.5.1
Oct 10 15:31:46 mythtv kernel: vesafb: framebuffer at 0x48000000, mapped to 0xe080d000, size 3072k
Oct 10 15:31:46 mythtv kernel: vesafb: mode is 1024x768x16, linelength=2048, pages=0
Oct 10 15:31:46 mythtv kernel: vesafb: protected mode interface info at c000:0336
Oct 10 15:31:46 mythtv kernel: vesafb: scrolling: redraw
Oct 10 15:31:46 mythtv kernel: vesafb: directcolor: size=0:5:6:5, shift=0:11:5:0
Oct 10 15:31:46 mythtv kernel: Looking for splash picture... no good signature found.

Oct 10 15:31:46 mythtv kernel: Console: switching to colour frame buffer device 128x48
Oct 10 15:31:46 mythtv kernel: fb0: VESA VGA frame buffer device
Oct 10 15:31:46 mythtv kernel: pty: 256 Unix98 ptys configured
Oct 10 15:31:46 mythtv kernel: Floppy drive(s): fd0 is 1.44M
Oct 10 15:31:46 mythtv kernel: FDC 0 is a post-1991 82077
Oct 10 15:31:46 mythtv kernel: RAMDISK driver initialized: 16 RAM disks of 4096K size 1024 blocksize
Oct 10 15:31:46 mythtv kernel: loop: loaded (max 8 devices)
Oct 10 15:31:46 mythtv kernel: Uniform Multi-Platform E-IDE driver Revision: 7.00beta4-2.4
Oct 10 15:31:46 mythtv kernel: ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
Oct 10 15:31:46 mythtv kernel: ICH2: IDE controller at PCI slot 00:1f.1
Oct 10 15:31:46 mythtv kernel: ICH2: chipset revision 1
Oct 10 15:31:46 mythtv kernel: ICH2: not 100%% native mode: will probe irqs later
Oct 10 15:31:46 mythtv kernel:     ide0: BM-DMA at 0x2460-0x2467, BIOS settings: hda:DMA, hdb:pio
Oct 10 15:31:46 mythtv kernel:     ide1: BM-DMA at 0x2468-0x246f, BIOS settings: hdc:DMA, hdd:pio
Oct 10 15:31:46 mythtv kernel: hda: WDC WD2500JB-00GVA0, ATA DISK drive
Oct 10 15:31:46 mythtv kernel: hdc: Compaq CRD-8481B, ATAPI CD/DVD-ROM drive
Oct 10 15:31:46 mythtv kernel: ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
Oct 10 15:31:46 mythtv kernel: ide1 at 0x170-0x177,0x376 on irq 15
Oct 10 15:31:46 mythtv kernel: hda: attached ide-disk driver.
Oct 10 15:31:46 mythtv kernel: hda: host protected area => 1
Oct 10 15:31:46 mythtv kernel: hda: 488397168 sectors (250059 MB) w/8192KiB Cache, CHS=30401/255/63
Oct 10 15:31:46 mythtv kernel: ide-cd: passing drive hdc to ide-scsi emulation.
Oct 10 15:31:46 mythtv kernel: hdc: attached ide-scsi driver.
Oct 10 15:31:46 mythtv kernel: Partition check:
Oct 10 15:31:46 mythtv kernel:  hda: hda1 hda2 hda3 hda4
Oct 10 15:31:46 mythtv kernel: Highpoint HPT370 Softwareraid driver for linux version 0.02
Oct 10 15:31:46 mythtv kernel: Guestimating sector 488375744 for superblock
Oct 10 15:31:46 mythtv kernel: SCSI subsystem driver Revision: 1.00
Oct 10 15:31:46 mythtv kernel: scsi0 : SCSI host adapter emulation for IDE ATAPI devices
Oct 10 15:31:46 mythtv kernel:   Vendor: COMPAQ    Model: CRD-8481B         Rev: 2.05
Oct 10 15:31:46 mythtv kernel:   Type:   CD-ROM                             ANSI SCSI revision: 02
Oct 10 15:31:46 mythtv kernel: Attached scsi CD-ROM sr0 at scsi0, channel 0, id 0, lun 0
Oct 10 15:31:46 mythtv kernel: sr0: scsi3-mmc drive: 48x/48x cd/rw xa/form2 cdda tray
Oct 10 15:31:46 mythtv kernel: Uniform CD-ROM driver Revision: 3.12
Oct 10 15:31:46 mythtv kernel: Initializing Cryptographic API
Oct 10 15:31:46 mythtv kernel: NET4: Linux TCP/IP 1.0 for NET4.0
Oct 10 15:31:46 mythtv kernel: IP Protocols: ICMP, UDP, TCP, IGMP
Oct 10 15:31:46 mythtv kernel: IP: routing cache hash table of 4096 buckets, 32Kbytes
Oct 10 15:31:46 mythtv kernel: TCP: Hash tables configured (established 131072 bind 65536)
Oct 10 15:31:46 mythtv kernel: NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
Oct 10 15:31:46 mythtv kernel: RAMDISK: Compressed image found at block 0
Oct 10 15:31:46 mythtv kernel: Freeing initrd memory: 151k freed
Oct 10 15:31:46 mythtv kernel: VFS: Mounted root (ext2 filesystem).
Oct 10 15:31:46 mythtv kernel: Journalled Block Device driver loaded
Oct 10 15:31:46 mythtv kernel: kjournald starting.  Commit interval 5 seconds
Oct 10 15:31:46 mythtv kernel: EXT3 FS 2.4-0.9.19, 19 August 2002 on ide0(3,1), internal journal
Oct 10 15:31:46 mythtv kernel: EXT3-fs: mounted filesystem with ordered data mode.
Oct 10 15:31:46 mythtv kernel: Freeing unused kernel memory: 116k freed
Oct 10 15:31:46 mythtv kernel: Adding Swap: 955856k swap-space (priority -1)
Oct 10 15:31:46 mythtv kernel: EXT3 FS 2.4-0.9.19, 19 August 2002 on ide0(3,1), internal journal
Oct 10 15:31:46 mythtv kernel: Real Time Clock Driver v1.10f
Oct 10 15:31:46 mythtv kernel: usb.c: registered new driver usbdevfs
Oct 10 15:31:46 mythtv kernel: usb.c: registered new driver hub
Oct 10 15:31:46 mythtv kernel: usb-uhci.c: $Revision: 1.275 $ time 16:10:01 Apr 10 2004
Oct 10 15:31:46 mythtv kernel: usb-uhci.c: High bandwidth mode enabled
Oct 10 15:31:46 mythtv kernel: PCI: Found IRQ 5 for device 00:1f.4
Oct 10 15:31:46 mythtv kernel: usb-uhci.c: USB UHCI at I/O 0x2440, IRQ 5
Oct 10 15:31:46 mythtv kernel: usb-uhci.c: Detected 2 ports
Oct 10 15:31:46 mythtv kernel: usb.c: new USB bus registered, assigned bus number 1
Oct 10 15:31:46 mythtv kernel: hub.c: USB hub found
Oct 10 15:31:46 mythtv kernel: hub.c: 2 ports detected
Oct 10 15:31:46 mythtv kernel: usb-uhci.c: v1.275:USB Universal Host Controller Interface driver
Oct 10 15:31:46 mythtv kernel: Serial driver version 5.05c (2001-07-08) with MANY_PORTS SHARE_IRQ SERIAL_PCI ISAPNP enabled
Oct 10 15:31:46 mythtv kernel: ttyS00 at 0x03f8 (irq = 4) is a 16550A
Oct 10 15:31:46 mythtv kernel: ttyS01 at 0x02f8 (irq = 3) is a 16550A
Oct 10 15:31:46 mythtv kernel: hw_random hardware driver 1.0.0 loaded
Oct 10 15:31:46 mythtv kernel: eepro100.c:v1.09j-t 9/29/99 Donald Becker http://www.scyld.com/network/eepro100.html
Oct 10 15:31:46 mythtv kernel: eepro100.c: $Revision: 1.36 $ 2000/11/17 Modified by Andrey V. Savochkin <saw@saw.sw.com.sg> and others
Oct 10 15:31:46 mythtv kernel: PCI: Found IRQ 5 for device 02:08.0
Oct 10 15:31:46 mythtv kernel: eth0: OEM i82557/i82558 10/100 Ethernet, 00:02:A5:02:8E:94, IRQ 5.
Oct 10 15:31:46 mythtv kernel:   Board assembly 010633-001, Physical connectors present: RJ45
Oct 10 15:31:46 mythtv kernel:   Primary interface chip i82555 PHY #1.
Oct 10 15:31:46 mythtv kernel:   General self-test: passed.
Oct 10 15:31:46 mythtv kernel:   Serial sub-system self-test: passed.
Oct 10 15:31:46 mythtv kernel:   Internal registers self-test: passed.
Oct 10 15:31:46 mythtv kernel:   ROM checksum self-test: passed (0x04f4518b).
Oct 10 15:31:46 mythtv kernel: Linux agpgart interface v0.99 (c) Jeff Hartmann
Oct 10 15:31:46 mythtv kernel: agpgart: Maximum main memory to use for agp memory: 440M
Oct 10 15:31:46 mythtv kernel: agpgart: Detected Intel i815 chipset
Oct 10 15:31:46 mythtv kernel: agpgart: AGP aperture is 64M @ 0x4c000000
Oct 10 15:31:46 mythtv kernel: PCI: Found IRQ 11 for device 00:1f.5
Oct 10 15:31:46 mythtv kernel: intel8x0: clocking to 41158
Oct 10 15:31:46 mythtv kernel: kjournald starting.  Commit interval 5 seconds
Oct 10 15:31:46 mythtv kernel: EXT3 FS 2.4-0.9.19, 19 August 2002 on ide0(3,4), internal journal
Oct 10 15:31:46 mythtv kernel: EXT3-fs: mounted filesystem with ordered data mode.
Oct 10 15:31:46 mythtv kernel: blk: queue c0316080, I/O limit 4095Mb (mask 0xffffffff)
Oct 10 15:31:46 mythtv kernel: ledxmit_dev: IR Remote Control driver registered, at major 72 
Oct 10 15:31:46 mythtv kernel: ledxmit_serial: auto-detected active high receiver
Oct 10 15:31:46 mythtv kernel: ledxmit_dev: ledxmit_register_plugin:sample_rate: 0
Oct 10 15:31:52 mythtv kernel: Linux video capture interface: v1.00
Oct 10 15:31:52 mythtv kernel: i2c-core.o: i2c core module version 2.6.1 (20010830)
Oct 10 15:31:52 mythtv kernel: i2c-algo-bit.o: i2c bit algorithm module
Oct 10 15:31:52 mythtv kernel: saa7127: video encoder driver version V 0.3 loaded
Oct 10 15:31:52 mythtv kernel: ivtv: ==================== START INIT IVTV ====================
Oct 10 15:31:52 mythtv kernel: ivtv: version 0.1.10 (0.1.10pre2-ck100z) loading
Oct 10 15:31:52 mythtv kernel: ivtv: Linux version: 2.4.25-chw
Oct 10 15:31:52 mythtv kernel: ivtv: In case of problems please include the debug info
Oct 10 15:31:52 mythtv kernel: ivtv: between the START INIT IVTV and END INIT IVTV lines when
Oct 10 15:31:52 mythtv kernel: ivtv: mailing the ivtv-devel mailinglist.
Oct 10 15:31:52 mythtv kernel: ivtv: Autodetected WinTV PVR 350 card
Oct 10 15:31:52 mythtv kernel: ivtv: Found an iTVC15 based chip
Oct 10 15:31:52 mythtv kernel: PCI: Found IRQ 10 for device 02:09.0
Oct 10 15:31:52 mythtv kernel: ivtv: pci: PCIBUS detected device: 0x1130 vendor: 0x8086
Oct 10 15:31:52 mythtv kernel: tuner: chip found at addr 0xc2 i2c-bus ivtv i2c driver #0
Oct 10 15:31:52 mythtv kernel: ivtv: i2c attach [client=(tuner unset),ok]
Oct 10 15:31:52 mythtv kernel: tuner: type set to 2 (Philips NTSC (FI1236,FM1236 and compatibles)) by insmod option
Oct 10 15:31:52 mythtv kernel: tuner: The type=<n> insmod option will go away soon.
Oct 10 15:31:52 mythtv kernel: tuner: Please use the tuner=<n> option provided by
Oct 10 15:31:52 mythtv kernel: tuner: tv aard core driver (bttv, saa7134, ...) instead.
Oct 10 15:31:53 mythtv kernel: saa7127: Selecting NTSC video Standard
Oct 10 15:31:53 mythtv kernel: saa7127: Selecting S-Video+Composite
Oct 10 15:31:53 mythtv kernel: saa7127: Turn WSS off
Oct 10 15:31:53 mythtv kernel: saa7127: Widescreen Mode 4:3 Full Format
Oct 10 15:31:53 mythtv kernel: saa7127: Selecting Normal Encoder Input
Oct 10 15:31:53 mythtv kernel: saa7127: Enable Video Output
Oct 10 15:31:53 mythtv kernel: ivtv: i2c attach [client=saa7127[0],ok]
Oct 10 15:31:53 mythtv kernel: saa7115: starting probe for adapter ivtv i2c driver #0 (0x10005)
Oct 10 15:31:53 mythtv kernel: apm: BIOS not found.
Oct 10 15:31:53 mythtv kernel: saa7115: detecting saa7115 client on address 0x42
Oct 10 15:31:53 mythtv kernel: saa7115: writing init values
Oct 10 15:31:53 mythtv kernel: ivtv: i2c attach [client=saa7115[0],ok]
Oct 10 15:31:53 mythtv kernel: saa7115: status: (1E) 0x50, (1F) 0xc0
Oct 10 15:31:53 mythtv kernel: msp34xx: ivtv version
Oct 10 15:31:53 mythtv kernel: msp34xx: init: chip=MSP3448W-A2, has NICAM support, simple (D) mode, simpler (G) no-thread mode
Oct 10 15:31:53 mythtv kernel: msp34xx: $Id$ compiled on: Oct 10 2004 11:25:03
Oct 10 15:31:53 mythtv kernel: ivtv: i2c attach [client=MSP3448W-A2,ok]
Oct 10 15:31:53 mythtv kernel: tveeprom: Hauppauge: model = 48132, rev = J323, serial# = 7011834
Oct 10 15:31:53 mythtv kernel: tveeprom: tuner = Philips FM1236 (idx = 23, type = 2)
Oct 10 15:31:53 mythtv kernel: tveeprom: tuner fmt = NTSC(M) (eeprom = 0x08, v4l2 = 0x00001000)
Oct 10 15:31:53 mythtv kernel: tveeprom: audio_processor = MSP3440 (type = 11)
Oct 10 15:31:53 mythtv kernel: ivtv: i2c attach [client=tveeprom[0],ok]
Oct 10 15:31:53 mythtv kernel: ivtv: Tuner Type 2, Tuner formats 0x00001000, Radio: yes, Model 0x00a93493, Revision 0x00000001
Oct 10 15:31:53 mythtv kernel: ivtv: NTSC tuner detected
Oct 10 15:31:53 mythtv kernel: ivtv: Radio detected
Oct 10 15:31:54 mythtv kernel: ivtv: Encoder revision: 0x02040011
Oct 10 15:31:54 mythtv kernel: ivtv: Decoder revision: 0x02020023
Oct 10 15:31:54 mythtv kernel: ivtv: Configuring WinTV PVR 350 card with 9 streams
Oct 10 15:31:54 mythtv kernel: ivtv: Create DMA stream 0 using 128 buffers of size 32768
Oct 10 15:31:54 mythtv kernel: ivtv: Create DMA stream 1 using 128 buffers of size 32768
Oct 10 15:31:54 mythtv kernel: ivtv: Create stream 2 using 128 buffers of size 4096
Oct 10 15:31:54 mythtv kernel: ivtv: Create DMA stream 3 using 128 buffers of size 32768
Oct 10 15:31:54 mythtv kernel: ivtv: Create stream 4
Oct 10 15:31:54 mythtv kernel: ivtv: Create DMA stream 5 using 16 buffers of size 32768
Oct 10 15:31:54 mythtv kernel: ivtv: Create stream 6 using 128 buffers of size 4096
Oct 10 15:31:54 mythtv kernel: ivtv: Create stream 7
Oct 10 15:31:54 mythtv kernel: ivtv: Create DMA stream 8 using 16 buffers of size 32768
Oct 10 15:31:54 mythtv kernel: ivtv: Setting Tuner 2
Oct 10 15:31:54 mythtv kernel: ivtv: Setting audio matrix to input 3, output 1
Oct 10 15:31:54 mythtv kernel: ivtv: Switching standard to NTSC.
Oct 10 15:31:55 mythtv kernel: saa7115: decoder set norm NTSC
Oct 10 15:31:55 mythtv kernel: saa7115: set audio: 0x01
Oct 10 15:31:55 mythtv kernel: saa7127: Setting Encoder Video Standard
Oct 10 15:31:55 mythtv kernel: saa7127: Set NTSC Video Mode
Oct 10 15:31:55 mythtv kernel: saa7127: Selecting NTSC video Standard
Oct 10 15:31:55 mythtv kernel: ivtv: Initialized WinTV PVR 350, card #0
Oct 10 15:31:55 mythtv kernel: ivtv: ====================  END INIT IVTV  ====================
Oct 10 15:31:55 mythtv kernel: ivtv-osd: Framebuffer module loaded (attached to ivtv card id 0)
Oct 10 15:31:55 mythtv kernel: apm: BIOS not found.
Oct 10 15:31:56 mythtv kernel: ivtv-osd: Framebuffer is at decoder-relative address 0x00510000 and has 1704960 bytes.
Oct 10 15:31:56 mythtv kernel: ivtv-osd: screen coords: [0 0] -> [720 480]
Oct 10 15:31:56 mythtv kernel: ivtv-osd: original global alpha = 208
Oct 10 15:31:56 mythtv kernel: ivtv-osd: current OSD state = 39
Oct 10 15:31:57 mythtv kernel: ivtv-osd: new global alpha = 208 (1 255 0)
Oct 10 15:31:57 mythtv kernel: ivtv-osd: Good video_base is inside valid allocated space.
Oct 10 15:31:57 mythtv kernel: ivtv-osd: framebuffer at 0x45510000, mapped to 0xe2d44000, size 1350k
Oct 10 15:31:57 mythtv kernel: ivtv-osd: mode is 720x480x32, linelength=2880
Oct 10 15:31:57 mythtv kernel: ivtv-osd: fb1: iTVC15 TV out frame buffer device
Oct 10 15:31:57 mythtv kernel: lirc_dev: IR Remote Control driver registered, at major 61 
Oct 10 15:31:57 mythtv kernel: bttv: driver version 0.9.15 loaded
Oct 10 15:31:57 mythtv kernel: bttv: using 8 buffers with 2080k (520 pages) each for capture
Oct 10 15:31:57 mythtv kernel: bttv: driver version 0.9.15 loaded
Oct 10 15:31:57 mythtv kernel: bttv: using 8 buffers with 2080k (520 pages) each for capture
Oct 10 15:31:57 mythtv kernel: lirc_i2c: chip found @ 0x18 (Hauppauge IR)
Oct 10 15:31:57 mythtv kernel: ivtv: i2c attach [client=Hauppauge IR,ok]
Oct 10 15:31:57 mythtv kernel: lirc_dev: lirc_register_plugin:sample_rate: 10
Oct 10 15:31:57 mythtv kernel: saa7115: decoder set input (0)
Oct 10 15:31:57 mythtv kernel: saa7115: now setting Composite input
Oct 10 15:31:57 mythtv kernel: ivtv: Setting audio matrix to input 1, output 1
Oct 10 15:31:57 mythtv kernel: ivtv: Finished with Mute
Oct 10 15:31:57 mythtv kernel: saa7115: decoder set picture bright=128 contrast=63 saturation=64 hue=0
Oct 10 15:31:57 mythtv kernel: saa7115: decoder set picture bright=128 contrast=63 saturation=63 hue=0
Oct 10 15:31:57 mythtv kernel: saa7115: decoder set picture bright=127 contrast=63 saturation=63 hue=0
Oct 10 15:31:57 mythtv kernel: saa7115: decoder set picture bright=127 contrast=63 saturation=63 hue=0
Oct 10 15:32:00 mythtv kernel: apm: BIOS not found.
Oct 10 15:32:01 mythtv kernel: saa7115: decoder set picture bright=127 contrast=63 saturation=63 hue=0
Oct 10 15:32:01 mythtv last message repeated 7 times
Oct 10 15:32:01 mythtv kernel: saa7115: decoder set size
Oct 10 15:32:03 mythtv kernel: saa7115: decoder disable output
Oct 10 15:32:03 mythtv kernel: saa7115: decoder enable output
Oct 10 15:32:03 mythtv kernel: ivtv: VIM Restart

Last edited by wrooster on Tue Oct 12, 2004 9:09 am, edited 1 time in total.

Top

mythdude350

Post subject:

Posted: Tue Oct 12, 2004 12:10 am

Joined: Tue Oct 05, 2004 2:30 am

Posts: 24

Everything looks per your output yet I get a black screen on tv out of 350. I can make it work with older drivers. What else can I do ? I dont have any ivtvdev file being made at all. My X pretty much says it cant find the driver ivtvdev. If I try fbdev then I get error saying initialization failed or something. I have to identify the device it seems.

Here's output:

root@mythtv:/var/log # ivtvfbctl /dev/fb1 -on
Framebuffer state:
Framebuffer state: ON
Global alpha: ENABLED
Local alpha: disabled
Flicker reduction: ENABLED
Global alpha value: 208
Active buffer:
Offset: 0x00000000
Maximum offset: 0x00151800
Horizontal stride: 720 32-bit words
Vertical lines: 480 lines
Coordinates (x, y): 0, 0

Framebuffer state:
Framebuffer state: ON
Global alpha: ENABLED
Local alpha: disabled
Flicker reduction: ENABLED
Global alpha value: 208
Active buffer:
Offset: 0x00000000
Maximum offset: 0x00151800
Horizontal stride: 720 32-bit words
Vertical lines: 480 lines
Coordinates (x, y): 0, 0

Oct 11 22:44:41 mythtv kernel: product code 434d rev 00.9 date 07-31-00
Oct 11 22:44:41 mythtv kernel: 8K byte-wide RAM 5:3 Rx:Tx split, autoselect/Autonegotiate interface.
Oct 11 22:44:41 mythtv kernel: MII transceiver found at address 24, status 786d.
Oct 11 22:44:41 mythtv kernel: Enabling bus-master transmits and whole-frame receives.
Oct 11 22:44:41 mythtv kernel: 00:10.0: scatter/gather enabled. h/w checksums enabled
Oct 11 22:44:41 mythtv kernel: Linux agpgart interface v0.99 (c) Jeff Hartmann
Oct 11 22:44:41 mythtv kernel: agpgart: Maximum main memory to use for agp memory: 149M
Oct 11 22:44:41 mythtv kernel: agpgart: Detected Intel 440BX chipset
Oct 11 22:44:41 mythtv kernel: agpgart: AGP aperture is 64M @ 0xf4000000
Oct 11 22:44:41 mythtv kernel: PCI: Found IRQ 10 for device 00:06.0
Oct 11 22:44:41 mythtv kernel: PCI: Sharing IRQ 10 with 00:10.0
Oct 11 22:44:41 mythtv kernel: SGI XFS with realtime, no debug enabled
Oct 11 22:44:41 mythtv kernel: SGI XFS Quota Management subsystem
Oct 11 22:44:41 mythtv kernel: XFS mounting filesystem ide0(3,3)
Oct 11 22:44:41 mythtv kernel: XFS mounting filesystem ide0(3,4)
Oct 11 22:44:41 mythtv kernel: blk: queue c0316080, I/O limit 4095Mb (mask 0xffffffff)
Oct 11 22:44:48 mythtv kernel: apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16)
Oct 11 22:44:48 mythtv kernel: Linux video capture interface: v1.00
Oct 11 22:44:48 mythtv kernel: i2c-core.o: i2c core module version 2.6.1 (20010830)
Oct 11 22:44:48 mythtv kernel: i2c-algo-bit.o: i2c bit algorithm module
Oct 11 22:44:48 mythtv kernel: saa7127: video encoder driver version V 0.3 loaded
Oct 11 22:44:48 mythtv kernel: ivtv: ==================== START INIT IVTV ====================
Oct 11 22:44:48 mythtv kernel: ivtv: version 0.1.10 (0.1.10pre2-ck100z) loading
Oct 11 22:44:48 mythtv kernel: ivtv: Linux version: 2.4.25-chw
Oct 11 22:44:48 mythtv kernel: ivtv: In case of problems please include the debug info
Oct 11 22:44:48 mythtv kernel: ivtv: between the START INIT IVTV and END INIT IVTV lines when
Oct 11 22:44:48 mythtv kernel: ivtv: mailing the ivtv-devel mailinglist.
Oct 11 22:44:48 mythtv kernel: ivtv: Autodetected WinTV PVR 350 card
Oct 11 22:44:48 mythtv kernel: ivtv: Found an iTVC15 based chip
Oct 11 22:44:48 mythtv kernel: PCI: Found IRQ 11 for device 00:0e.0
Oct 11 22:44:48 mythtv kernel: PCI: Sharing IRQ 11 with 00:04.2
Oct 11 22:44:48 mythtv kernel: ivtv: pci: PCIBUS detected device: 0x7190 vendor: 0x8086
Oct 11 22:44:48 mythtv kernel: tuner: chip found at addr 0xc2 i2c-bus ivtv i2c driver #0
Oct 11 22:44:48 mythtv kernel: ivtv: i2c attach [client=(tuner unset),ok]
Oct 11 22:44:48 mythtv kernel: tuner: type set to 44 (Philips 4 in 1 (ATI TV Wonder Pro/Conexant)) by insmod option
Oct 11 22:44:48 mythtv kernel: tuner: The type=<n> insmod option will go away soon.
Oct 11 22:44:48 mythtv kernel: tuner: Please use the tuner=<n> option provided by
Oct 11 22:44:48 mythtv kernel: tuner: tv aard core driver (bttv, saa7134, ...) instead.
Oct 11 22:44:48 mythtv kernel: saa7127: Selecting NTSC video Standard

Oct 11 22:44:48 mythtv kernel: saa7127: Selecting NTSC video Standard
Oct 11 22:44:48 mythtv kernel: saa7127: Selecting S-Video+Composite
Oct 11 22:44:48 mythtv kernel: saa7127: Turn WSS off
Oct 11 22:44:48 mythtv kernel: saa7127: Widescreen Mode 4:3 Full Format
Oct 11 22:44:48 mythtv kernel: saa7127: Selecting Normal Encoder Input
Oct 11 22:44:48 mythtv kernel: saa7127: Enable Video Output
Oct 11 22:44:48 mythtv kernel: ivtv: i2c attach [client=saa7127[0],ok]
Oct 11 22:44:48 mythtv kernel: saa7115: starting probe for adapter ivtv i2c driver #0 (0x10005)
Oct 11 22:44:48 mythtv kernel: saa7115: detecting saa7115 client on address 0x42
Oct 11 22:44:48 mythtv kernel: saa7115: writing init values
Oct 11 22:44:49 mythtv kernel: ivtv: i2c attach [client=saa7115[0],ok]
Oct 11 22:44:49 mythtv kernel: saa7115: status: (1E) 0x09, (1F) 0xc0
Oct 11 22:44:49 mythtv kernel: msp34xx: ivtv version
Oct 11 22:44:49 mythtv kernel: msp34xx: init: chip=MSP3448W-A2, has NICAM support, simple (D) mode, simpler (G) no-thread mode
Oct 11 22:44:49 mythtv kernel: msp34xx: $Id$ compiled on: Oct 11 2004 22:35:13
Oct 11 22:44:49 mythtv kernel: ivtv: i2c attach [client=MSP3448W-A2,ok]
Oct 11 22:44:49 mythtv kernel: tveeprom: Hauppauge: model = 48132, rev = K168, serial# = 2844335
Oct 11 22:44:49 mythtv kernel: tveeprom: tuner = Philips FM1216 ME MK3 (idx = 68, type = 38)
Oct 11 22:44:49 mythtv kernel: tveeprom: tuner fmt = NTSC(M) (eeprom = 0x08, v4l2 = 0x00001000)
Oct 11 22:44:49 mythtv kernel: tveeprom: audio_processor = MSP3440 (type = 11)
Oct 11 22:44:49 mythtv kernel: ivtv: i2c attach [client=tveeprom[0],ok]
Oct 11 22:44:49 mythtv kernel: ivtv: Tuner Type 38, Tuner formats 0x00001000, Radio: yes, Model 0x00ad1598, Revision 0x00000001
Oct 11 22:44:49 mythtv kernel: ivtv: NTSC tuner detected
Oct 11 22:44:49 mythtv kernel: ivtv: Radio detected
Oct 11 22:44:50 mythtv kernel: ivtv: Encoder revision: 0x02040011
Oct 11 22:44:50 mythtv kernel: ivtv: Decoder revision: 0x02020023
Oct 11 22:44:50 mythtv kernel: ivtv: Configuring WinTV PVR 350 card with 9 streams
Oct 11 22:44:50 mythtv kernel: ivtv: Create DMA stream 0 using 128 buffers of size 32768
Oct 11 22:44:50 mythtv kernel: ivtv: Create DMA stream 1 using 128 buffers of size 32768
Oct 11 22:44:50 mythtv kernel: ivtv: Create stream 2 using 128 buffers of size 4096
Oct 11 22:44:50 mythtv kernel: ivtv: Create DMA stream 3 using 128 buffers of size 32768
Oct 11 22:44:50 mythtv kernel: ivtv: Create stream 4
Oct 11 22:44:50 mythtv kernel: ivtv: Create DMA stream 5 using 16 buffers of size 32768
Oct 11 22:44:50 mythtv kernel: ivtv: Create stream 6 using 128 buffers of size 4096
Oct 11 22:44:50 mythtv kernel: ivtv: Create stream 7
Oct 11 22:44:50 mythtv kernel: ivtv: Create DMA stream 8 using 16 buffers of size 32768
Oct 11 22:44:50 mythtv kernel: ivtv: Setting Tuner 38
Oct 11 22:44:50 mythtv kernel: tuner: type already set to 44, ignoring request for 38

Oct 11 22:44:50 mythtv kernel: ivtv: Setting audio matrix to input 3, output 1
Oct 11 22:44:50 mythtv kernel: ivtv: Switching standard to NTSC.
Oct 11 22:44:51 mythtv kernel: saa7115: decoder set norm NTSC
Oct 11 22:44:51 mythtv kernel: saa7115: set audio: 0x01
Oct 11 22:44:51 mythtv kernel: saa7127: Setting Encoder Video Standard
Oct 11 22:44:51 mythtv kernel: saa7127: Set NTSC Video Mode
Oct 11 22:44:51 mythtv kernel: saa7127: Selecting NTSC video Standard
Oct 11 22:44:51 mythtv kernel: ivtv: Initialized WinTV PVR 350, card #0
Oct 11 22:44:51 mythtv kernel: ivtv: ==================== END INIT IVTV ====================
Oct 11 22:44:51 mythtv kernel: ivtv-osd: Framebuffer module loaded (attached to ivtv card id 0)
Oct 11 22:44:51 mythtv kernel: ivtv-osd: Framebuffer is at decoder-relative address 0x00510000 and has 1704960 bytes.
Oct 11 22:44:52 mythtv kernel: ivtv-osd: screen coords: [0 0] -> [720 480]
Oct 11 22:44:52 mythtv kernel: ivtv-osd: original global alpha = 208
Oct 11 22:44:52 mythtv kernel: ivtv-osd: current OSD state = 39
Oct 11 22:44:53 mythtv kernel: ivtv-osd: new global alpha = 208 (1 255 0)
Oct 11 22:44:53 mythtv kernel: ivtv-osd: Good video_base is inside valid allocated space.
Oct 11 22:44:53 mythtv kernel: ivtv-osd: framebuffer at 0xf9510000, mapped to 0xcedfd000, size 1350k
Oct 11 22:44:53 mythtv kernel: ivtv-osd: framebuffer at 0xf9510000, mapped to 0xcedfd000, size 1350k
Oct 11 22:44:53 mythtv kernel: ivtv-osd: mode is 720x480x32, linelength=2880
Oct 11 22:44:53 mythtv kernel: ivtv-osd: fb1: iTVC15 TV out frame buffer device
Oct 11 22:44:53 mythtv kernel: lirc_dev: IR Remote Control driver registered, at major 61
Oct 11 22:44:53 mythtv kernel: bttv: driver version 0.9.15 loaded
Oct 11 22:44:53 mythtv kernel: bttv: using 8 buffers with 2080k (520 pages) each for capture
Oct 11 22:44:53 mythtv kernel: bttv: Host bridge needs ETBF enabled.
Oct 11 22:44:53 mythtv kernel: bttv: driver version 0.9.15 loaded
Oct 11 22:44:53 mythtv kernel: bttv: using 8 buffers with 2080k (520 pages) each for capture
Oct 11 22:44:53 mythtv kernel: bttv: Host bridge needs ETBF enabled.
Oct 11 22:44:53 mythtv kernel: lirc_i2c: chip found @ 0x18 (Hauppauge IR)
Oct 11 22:44:53 mythtv kernel: ivtv: i2c attach [client=Hauppauge IR,ok]
Oct 11 22:44:53 mythtv kernel: lirc_dev: lirc_register_plugin:sample_rate: 10
Oct 11 22:44:53 mythtv kernel: saa7115: decoder set picture bright=128 contrast=63 saturation=64 hue=0
Oct 11 22:44:53 mythtv kernel: saa7115: decoder set picture bright=128 contrast=63 saturation=63 hue=0
Oct 11 22:44:53 mythtv kernel: saa7115: decoder set picture bright=127 contrast=63 saturation=63 hue=0
Oct 11 22:44:53 mythtv kernel: saa7115: decoder set picture bright=127 contrast=63 saturation=63 hue=0
Oct 11 22:44:53 mythtv kernel: ivtv: v4l2 ioctl: set frequency 1236
Oct 11 22:44:54 mythtv kernel: ivtv: Finished with Mute

Top

mythdude350

Post subject:

Posted: Tue Oct 12, 2004 12:15 am

Joined: Tue Oct 05, 2004 2:30 am

Posts: 24

I pretty much get a green screen for a second and then all black.

Top

mythdude350

Post subject:

Posted: Tue Oct 12, 2004 12:48 am

Joined: Tue Oct 05, 2004 2:30 am

Posts: 24

Okay I found ivtvdev_drv.o pre-compiled on web. I copied it to the X11R6.../driver directory and now tv out is working.

However now X keeps on asking me to input login information rather than directly starting the frontend. How can I restore the original settings of X where it would simply start the front end automatically without any login screen.

Thanks !!

Top

cesman

Post subject:

Posted: Tue Oct 12, 2004 8:20 am

Joined: Fri Sep 19, 2003 7:05 pm

Posts: 5088

Location: Fontana, Ca

GDM should launch FVWM automaticaly after 30 secs. The isue could be GDM's configuration has been changed or /home/mythtv/.fvwm/.fvwm2rc has been changed so it doesn't lanuch MythTV (KnopmMyth-run).

_________________
cesman

When the source is open, the possibilities are endless!

Top

wrooster

Post subject:

Posted: Tue Oct 12, 2004 9:05 am

Joined: Thu Feb 19, 2004 6:52 pm

Posts: 117

Quote:

GDM should launch FVWM automaticaly after 30 secs.

that's exactly how my newly installed R4V5 behaves.

ps: i grok'd the .fvwm2rc a bit but i did not see an obvious place to cut the delay down from 30 seconds (to say 10). is there a trivial way to do this?

thanks,
jim

Top

Xsecrets

Post subject:

Posted: Tue Oct 12, 2004 9:08 am

Joined: Mon Oct 06, 2003 10:38 am

Posts: 4978

Location: Nashville, TN

that won't be in the fvwmrc it is handled by GDM. Sorry I can't help you with which file controls GDM, I've never messed with it, but at least you will be looking in the right direction.

_________________
Have a question search the forum and have a look at the KnoppMythWiki.

Xsecrets

Top

wrooster

Post subject:

Posted: Tue Oct 12, 2004 9:23 am

Joined: Thu Feb 19, 2004 6:52 pm

Posts: 117

ok, found it...

jds@mythtv:~ $ grep TimedLoginDelay /etc/gdm/gdm.conf
TimedLoginDelay=30

thanks for the lead.

jim

Top

Page 1 of 1

[ 9 posts ]

Board index Linux Installation

All times are UTC - 6 hours

Who is online

Users browsing this forum: No registered users and 66 guests

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum