Attention: I AM A NEEBEE !!!
Hello,
soory about my poor english.
I live in Germany.
I have downloaded the ISO of "KnoppMyth R5"
Install was OK
i have following Hardware:
AMD Athlon 700 MHz (SlotA)
Asus KV7 (Mainboard)
256 MB RAM
ELSA Erazor X (32MB VGA Card)
Intel 100 Pro (NIC)
TechniSat SkyStar 2 (Hardware rev. 2.6D)
with B2C2 ChipsSet
Sound Blaster 16 SoundCard with ES1317 ChipSet
The SoundCard i must configure via "alsa-setup"
at the first boottime the alsa but errors out to the display
if i change the config it was OK !
I am new in MythTV.
I have some Problems with the Configuration.
But i can´t find some TV Channnels !
I tryed the Following Configuration:
How must i Configure the DVB (TechniSat SkyStar 2)
so scan and find TV Channel´s ?
The "skystar2" module is loaded, if ich check this
with lsmod.
Witch device files i must found in /dev
for this DVB Card ? Or must i create some devices files
for that card ?
If i must create the device files, please tell me how !
Thanks to my friend markus, i tryed my dvb-card
on this windows pc (windows xp)
the card is OK, it runs under windows !!!
Thanks
bye
dennis
Infos:
root@mythtv:~# lsmod
Module Size Used by
eepro100 28428 0
pci_hotplug 30652 0
pcspkr 5324 0
analog 11936 0
8250_pnp 9984 0
tsdev 7616 0
snd_ens1371 20708 0
snd_rawmidi 21540 1 snd_ens1371
snd_seq_device 8328 1 snd_rawmidi
snd_pcm 81156 1 snd_ens1371
snd_timer 22404 1 snd_pcm
snd_page_alloc 9352 1 snd_pcm
snd_ac97_codec 64720 1 snd_ens1371
gameport 5632 2 analog,snd_ens1371
md5 5760 1
ipv6 232064 10
evdev 9088 0
autofs4 17284 0
af_packet 18312 0
snd_mixer_oss 18176 0
snd 47332 7 snd_ens1371,snd_rawmidi,snd_seq_device,snd_pcm,snd_timer,snd_ac97_codec,snd_mixer_oss
soundcore 9184 1 snd
skystar2 25476 0
e100 32768 0
mii 5888 2 eepro100,e100
dvb_core 77480 1 skystar2
crc32 6016 1 dvb_core
via_agp 9344 1
agpgart 29356 1 via_agp
parport_pc 37312 0
parport 34760 1 parport_pc
8250 19584 1 8250_pnp
serial_core 20096 1 8250
ds 15748 0
yenta_socket 19456 0
pcmcia_core 58948 2 ds,yenta_socket
thermal 12808 0
processor 17856 1 thermal
fan 4868 0
button 7056 0
battery 9860 0
ac 5508 0
rtc 11976 0
sbp2 23304 0
ohci1394 31876 0
ieee1394 304696 2 sbp2,ohci1394
usb_storage 61760 0
ohci_hcd 20100 0
uhci_hcd 30096 0
usbcore 99172 5 usb_storage,ohci_hcd,uhci_hcd
tmscsim 25792 0
ide_cd 38816 0
ide_scsi 15364 0
cat /var/log/dmesg
Linux version 2.6.9-chw-4 (
root@dev.mysettopbox.tv) (gcc version 3.3.4 (Debian 1
:3.3.4-9)) #1 SMP Fri Feb 4 20:15:03 EST 2005
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 000000000ffec000 (usable)
BIOS-e820: 000000000ffec000 - 000000000ffef000 (ACPI data)
BIOS-e820: 000000000ffef000 - 000000000ffff000 (reserved)
BIOS-e820: 000000000ffff000 - 0000000010000000 (ACPI NVS)
BIOS-e820: 00000000ffff0000 - 0000000100000000 (reserved)
0MB HIGHMEM available.
255MB LOWMEM available.
On node 0 totalpages: 65516
DMA zone: 4096 pages, LIFO batch:1
Normal zone: 61420 pages, LIFO batch:14
HighMem zone: 0 pages, LIFO batch:1
DMI 2.3 present.
ACPI: RSDP (v000 ASUS ) @ 0x000f6580
ACPI: RSDT (v001 ASUS K7V-T 0x30303031 MSFT 0x31313031) @ 0x0ffec000
ACPI: FADT (v001 ASUS K7V-T 0x30303031 MSFT 0x31313031) @ 0x0ffec080
ACPI: BOOT (v001 ASUS K7V-T 0x30303031 MSFT 0x31313031) @ 0x0ffec040
ACPI: DSDT (v001 ASUS K7V-T 0x00001000 MSFT 0x0100000b) @ 0x00000000
ACPI: PM-Timer IO Port: 0xe408
Built 1 zonelists
Kernel command line: auto BOOT_IMAGE=Linux ro root=301 hda=scsi hdb=scsi hdc=scs
i hdd=scsi hde=scsi hdf=scsi hdg=scsi hdh=scsi apm=power-off nomce
ide_setup: hda=scsi
ide_setup: hdb=scsi
ide_setup: hdc=scsi
ide_setup: hdd=scsi
ide_setup: hde=scsi
ide_setup: hdf=scsi
ide_setup: hdg=scsi
ide_setup: hdh=scsi
No local APIC present or hardware disabled
Initializing CPU#0
PID hash table entries: 1024 (order: 10, 16384 bytes)
Detected 699.987 MHz processor.
Using pmtmr for high-res timesource
Console: colour dummy device 80x25
Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
Memory: 254212k/262064k available (2769k kernel code, 7308k reserved, 1040k data
, 196k init, 0k highmem)
Checking if this processor honours the WP bit even in supervisor mode... Ok.
Calibrating delay loop... 1384.44 BogoMIPS (lpj=692224)
Security Scaffold v1.0.0 initialized
SELinux: Initializing.
SELinux: Starting in permissive mode
Mount-cache hash table entries: 512 (order: 0, 4096 bytes)
CPU: After generic identify, caps: 0183f9ff c1c3f9ff 00000000 00000000
CPU: After vendor identify, caps: 0183f9ff c1c3f9ff 00000000 00000000
CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
CPU: L2 Cache: 512K (64 bytes/line)
CPU: After all inits, caps: 0183f9ff c1c3f9ff 00000000 00000020
Enabling fast FPU save and restore... done.
Checking 'hlt' instruction... OK.
ACPI: IRQ9 SCI: Edge set to Level Trigger.
CPU0: AMD Athlon(tm) Processor stepping 01
per-CPU timeslice cutoff: 1463.67 usecs.
task migration cache decay timeout: 2 msecs.
SMP motherboard not detected.
Local APIC not detected. Using dummy APIC emulation.
Brought up 1 CPUs
checking if image is initramfs...it isn't (no cpio magic); looks like an initrd
Freeing initrd memory: 4k freed
NET: Registered protocol family 16
PCI: PCI BIOS revision 2.10 entry at 0xf0fa0, last bus=1
PCI: Using configuration type 1
mtrr: v2.0 (20020519)
ACPI: Subsystem revision 20040816
ACPI: Interpreter enabled
ACPI: Using PIC for interrupt routing
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 *5 6 7 9 10 11 12 14 15)
ACPI: PCI Root Bridge [PCI0] (00:00)
PCI: Probing PCI hardware (bus 00)
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
Linux Plug and Play Support v0.97 (c) Adam Belay
PnPBIOS: Scanning system for PnP BIOS support...
PnPBIOS: Found PnP BIOS installation structure at 0xc00fc2d0
PnPBIOS: PnP BIOS version 1.0, entry 0xf0000:0xc300, dseg 0xf0000
PnPBIOS: 16 nodes reported by PnP BIOS; 16 recorded by driver
SCSI subsystem initialized
PCI: Using ACPI for IRQ routing
ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 5
ACPI: PCI interrupt 0000:00:04.2[D] -> GSI 5 (level, low) -> IRQ 5
ACPI: PCI interrupt 0000:00:04.3[D] -> GSI 5 (level, low) -> IRQ 5
ACPI: PCI interrupt 0000:00:09.0[A] -> GSI 5 (level, low) -> IRQ 5
ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 10
ACPI: PCI interrupt 0000:00:0b.0[A] -> GSI 10 (level, low) -> IRQ 10
ACPI: PCI interrupt 0000:00:0d.0[A] -> GSI 5 (level, low) -> IRQ 5
ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 11
ACPI: PCI interrupt 0000:01:00.0[A] -> GSI 11 (level, low) -> IRQ 11
pnp: 00:12: ioport range 0x290-0x297 has been reserved
pnp: 00:12: ioport range 0xe400-0xe47f could not be reserved
pnp: 00:12: ioport range 0xe800-0xe83f could not be reserved
Simple Boot Flag at 0x3a set to 0x1
Total HugeTLB memory allocated, 0
VFS: Disk quotas dquot_6.5.1
Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
SGI XFS with ACLs, security attributes, realtime, large block numbers, no debug
enabled
SGI XFS Quota Management subsystem
SELinux: Registering netfilter hooks
Initializing Cryptographic API
PCI: Disabling Via external APIC routing
vesafb: framebuffer at 0xd8000000, mapped to 0xd0880000, size 3072k
vesafb: mode is 1024x768x16, linelength=2048, pages=0
vesafb: protected mode interface info at c000:ab39
vesafb: scrolling: redraw
vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0
bootsplash 3.1.4-2004/02/19-spock-0.1: looking for picture... no good signature
found.
Console: switching to colour frame buffer device 128x48
fb0: VESA VGA frame buffer device
isapnp: Scanning for PnP cards...
isapnp: No Plug & Play device found
serio: i8042 AUX port at 0x60,0x64 irq 12
serio: i8042 KBD port at 0x60,0x64 irq 1
Using anticipatory io scheduler
Floppy drive(s): fd0 is 1.44M
FDC 0 is a post-1991 82077
RAMDISK driver initialized: 16 RAM disks of 4096K size 1024 blocksize
loop: loaded (max 8 devices)
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
VP_IDE: IDE controller at PCI slot 0000:00:04.1
VP_IDE: chipset revision 16
VP_IDE: not 100% native mode: will probe irqs later
VP_IDE: VIA vt82c686a (rev 22) IDE UDMA66 controller on pci0000:00:04.1
ide0: BM-DMA at 0xd800-0xd807, BIOS settings: hda:DMA, hdb:pio
ide1: BM-DMA at 0xd808-0xd80f, BIOS settings: hdc:DMA, hdd:pio
Probing IDE interface ide0...
hda: WDC WD205BA, ATA DISK drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
Probing IDE interface ide1...
hdc: TOSHIBA CD-ROM XM-6502B, ATAPI CD/DVD-ROM drive
ide1 at 0x170-0x177,0x376 on irq 15
Probing IDE interface ide2...
ide2: Wait for ready failed before probe !
Probing IDE interface ide3...
ide3: Wait for ready failed before probe !
Probing IDE interface ide4...
ide4: Wait for ready failed before probe !
Probing IDE interface ide5...
ide5: Wait for ready failed before probe !
hda: max request size: 128KiB
hda: 40088160 sectors (20525 MB) w/2048KiB Cache, CHS=39770/16/63
hda: cache flushes not supported
hda: hda1 hda2 hda3 hda4
libata version 1.02 loaded.
mice: PS/2 mouse device common for all mice
input: AT Translated Set 2 keyboard on isa0060/serio0
input: ImPS/2 Logitech Wheel Mouse on isa0060/serio1
NET: Registered protocol family 2
IP: routing cache hash table of 2048 buckets, 16Kbytes
TCP: Hash tables configured (established 16384 bind 16384)
NET: Registered protocol family 1
NET: Registered protocol family 15
ACPI: (supports S0 S1 S4 S5)
ACPI wakeup devices:
PCI0 UAR1 UAR2 USB0 USB1
RAMDISK: Compressed image found at block 0
VFS: Mounted root (ext2 filesystem).
EXT3-fs: mounted filesystem with ordered data mode.
VFS: Mounted root (ext3 filesystem) readonly.
Trying to move old root to /initrd ... <6>kjournald starting. Commit interval 5
seconds
okay
Freeing unused kernel memory: 196k freed
dding 763048k swap on /dev/hda2. Priority:-1 extents:1
EXT3 FS on hda1, internal journal
ide-scsi is deprecated for cd burning! Use ide-cd and give dev=/dev/hdX as devic
e
scsi0 : SCSI host adapter emulation for IDE ATAPI devices
Vendor: TOSHIBA Model: CD-ROM XM-6502B Rev: 1013
Type: CD-ROM ANSI SCSI revision: 02
sr0: scsi3-mmc drive: 40x/40x cd/rw xa/form2 cdda tray
Uniform CD-ROM driver Revision: 3.20
Attached scsi CD-ROM sr0 at scsi0, channel 0, id 0, lun 0
usbcore: registered new driver usbfs
usbcore: registered new driver hub
USB Universal Host Controller Interface driver v2.2
ACPI: PCI interrupt 0000:00:04.2[D] -> GSI 5 (level, low) -> IRQ 5
uhci_hcd 0000:00:04.2: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller
uhci_hcd 0000:00:04.2: irq 5, io base 0000d400
uhci_hcd 0000:00:04.2: new USB bus registered, assigned bus number 1
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 2 ports detected
ACPI: PCI interrupt 0000:00:04.3[D] -> GSI 5 (level, low) -> IRQ 5
uhci_hcd 0000:00:04.3: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller
(#2)
uhci_hcd 0000:00:04.3: irq 5, io base 0000d000
uhci_hcd 0000:00:04.3: new USB bus registered, assigned bus number 2
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
ohci_hcd: 2004 Feb 02 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI)
Initializing USB Mass Storage driver...
usbcore: registered new driver usb-storage
USB Mass Storage support registered.
ieee1394: Initialized config rom entry `ip1394'
sbp2: $Rev: 1219 $ Ben Collins <bcollins@debian.org>
Real Time Clock Driver v1.12
ACPI: Power Button (FF) [PWRF]
ACPI: Processor [CPU0] (supports C1 C2, 16 throttling states)
Linux Kernel Card Services
options: [pci] [cardbus] [pm]
Serial: 8250/16550 driver $Revision: 1.90 $ 8 ports, IRQ sharing disabled
ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
parport0: PC-style at 0x378 (0x778) [PCSPP,TRISTATE]
parport_pc: Via 686A parallel port: io=0x378
Linux agpgart interface v0.100 (c) Dave Jones
agpgart: Detected VIA KX133 chipset
agpgart: Maximum main memory to use for agp memory: 203M
agpgart: AGP aperture is 64M @ 0xe4000000
e100: Intel(R) PRO/100 Network Driver, 3.0.27-k2-NAPI
e100: Copyright(c) 1999-2004 Intel Corporation
ACPI: PCI interrupt 0000:00:0d.0[A] -> GSI 5 (level, low) -> IRQ 5
e100: eth0: e100_probe: addr 0xd5000000, irq 5, MAC addr 00:D0:B7:15:64:2A
ACPI: PCI interrupt 0000:00:0b.0[A] -> GSI 10 (level, low) -> IRQ 10
drivers/media/dvb/b2c2/skystar2.c: FlexCopIIB(rev.195) chip found
drivers/media/dvb/b2c2/skystar2.c: the chip has 38 hardware filters
DVB: registering new adapter (SkyStar2).
NET: Registered protocol family 17
NET: Registered protocol family 10
IPv6 over IPv4 tunneling driver
EXT3 FS on hda4, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
kjournald starting. Commit interval 5 seconds
Disabled Privacy Extensions on device c0465bc0(lo)
e100: eth0: e100_watchdog: link up, 100Mbps, full-duplex