| LinHES Forums http://forums.linhes.org/ |
|
| Working pvr350 + working pvr250 = working pvr350 only...... http://forums.linhes.org/viewtopic.php?f=14&t=5818 |
Page 1 of 1 |
| Author: | siasl [ Sat Aug 27, 2005 10:56 am ] |
| Post subject: | Working pvr350 + working pvr250 = working pvr350 only...... |
Have a working R5A16 with a PVR350. Bought a PVR250 as a second tuner. Installed the PVR250. Rebooted. The original PVR350 was seen as card 0. The PVR250 was seen as card 1 in messages. In Mythtv-setup I could assign my source (comcast) just fine to tuner 0 (the pvr350). However, in the setup capture options there was not a tuner 1 but a second tuner 0. After doing the obligatory forum searches and reading about all the possible issues with new pvr250 cards I elected to try an experiment before going on the new ivtv re-compiles journey so many seem to have done. I took the PVR250 out leaving only the PVR350. Rebooted. Re setup the capture card in Mythtv-setup. Everything worked fine. I took the PVR350 out and installed pvr250 by itself. Re booted. Setup the capture card in Mythtv-setup. Everything worked fine once again. This seems to suggest the drivers I have are fine for both cards. What could be causing there not to be a tuner 1 option available when I have both cards installed? Just an extra tuner 0. Thanks |
|
| Author: | tjc [ Sat Aug 27, 2005 11:04 am ] |
| Post subject: | |
Just incomplete index information. Card 0 - Tuner 0, Card 1 - Tuner 0, ... The critical bit of differentiation is really under the 2. Capture Cards menu option in mythtv-setup where your first MPEG device should be /dev/video0 and the next one should be /dev/video1 |
|
| Author: | siasl [ Sat Aug 27, 2005 11:48 am ] |
| Post subject: | PVR350+PVR250= 2 tuners!!!! |
Thanks. That was somewhat non intuitive. Glad I didn't go shot gunning the new drivers deal. Thanks again. |
|
| Page 1 of 1 | All times are UTC - 6 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|