| LinHES Forums http://forums.linhes.org/ |
|
| Slide Show with PVR-500 and R5A30.2 http://forums.linhes.org/viewtopic.php?f=14&t=8894 |
Page 1 of 1 |
| Author: | vabiro [ Thu Mar 09, 2006 4:27 pm ] |
| Post subject: | Slide Show with PVR-500 and R5A30.2 |
Hi all, I am having a difficult time getting my PVR-500 to work with Knoppmyth. I am using R5A30.2 I have combed this and other forms for suggestions and have tried the processes outlined in: http://www.bitbenderforums.com/~ralpha6 ... mythtv.htm http://www.knoppmythwiki.org/index.php? ... 0DualTuner http://www.bitbenderforums.com/~ralpha6 ... mythtv.htm As well as a variety of posts here. It seems to be detecting the card fine: Quote: cat /var/log/messages | grep WinTV Mar 9 14:31:22 mythserver kernel: ivtv0: Autodetected WinTV PVR 150 card (iTVC16 based) Mar 9 14:31:22 mythserver kernel: ivtv0: Initialized WinTV PVR 500 (unit #1), card #0 Mar 9 14:31:22 mythserver kernel: ivtv1: Autodetected WinTV PVR 150 card (iTVC16 based) Mar 9 14:31:22 mythserver kernel: ivtv1: Initialized WinTV PVR 500 (unit #2), card #1 Mar 9 15:18:33 mythserver kernel: ivtv0: Autodetected WinTV PVR 150 card (iTVC16 based) Mar 9 15:18:33 mythserver kernel: ivtv0: Initialized WinTV PVR 500 (unit #1), card #0 Mar 9 15:18:33 mythserver kernel: ivtv1: Autodetected WinTV PVR 150 card (iTVC16 based) Mar 9 15:18:33 mythserver kernel: ivtv1: Initialized WinTV PVR 500 (unit #2), card #1 Quote: dmesg | grep tuner
tveeprom: Second (radio) tuner idx 101 tveeprom: tuner = Philips FQ1236A MK4 (idx = 92, type = 57) tveeprom: tuner fmt = NTSC(M) (eeprom = 0x08, v4l2 = 0x00001000) tuner (ivtv): chip found at addr 0xc0 i2c-bus ivtv i2c driver #0 ivtv0: i2c attach to card #0 ok [client=(tuner unset), addr=60] tuner: type set to 62 (Philips TEA5767HN FM Radio) by autodetect tuner (ivtv): chip found at addr 0xc2 i2c-bus ivtv i2c driver #0 ivtv0: i2c attach to card #0 ok [client=(tuner unset), addr=61] ivtv0: Detected a TEA5767 radio tuner. Enabling radio support. tuner: type set to 57 (Philips FQ1236A MK4) by ivtv i2c driver #0 tveeprom: Second (radio) tuner idx 101 tveeprom: tuner = Philips FQ1236A MK4 (idx = 92, type = 57) tveeprom: tuner fmt = NTSC(M) (eeprom = 0x08, v4l2 = 0x00001000) tuner (ivtv): chip found at addr 0xc2 i2c-bus ivtv i2c driver #1 ivtv1: i2c attach to card #1 ok [client=(tuner unset), addr=61] tuner: type set to 57 (Philips FQ1236A MK4) by ivtv i2c driver #1 The PC is a Dell Optiplex GX240 System specifications CPU Single Socket 478: Pentium 4 2.0 + GHz Chipset Intel 845 Expansion slots 4 PCI 512MB RAM hda = 20GB hdb = 300GB hdc = Samsung DVD-R+/- 1 AGP Storage I/O Onboard EIDE ATA 66/100 Front Side Bus 400 MHz Any thoughts would be appreciated. Victor |
|
| Author: | vabiro [ Thu Mar 09, 2006 6:29 pm ] |
| Post subject: | |
Hi again, I realised that I didn't specify what the problem was. It seems to take quite a while to display anything, and once it does it is a "slide show", and it seems to be the second tuner if that makes a difference (i.e., the first one doesn't seem to work) I piped the output from the mythfrontend to a file and this is the output: Quote: 2006-03-09 19:13:57.581 Enabled verbose msgs : important general
2006-03-09 19:13:57.858 Switching to square mode (blue) 2006-03-09 19:13:58.263 Joystick disabled. 2006-03-09 19:13:58.323 Registering Internal as a media playback plugin. 2006-03-09 19:13:58.350 Registering MythDVD DVD Media Handler as a media handler 2006-03-09 19:13:58.351 Registering MythDVD VCD Media Handler as a media handler 2006-03-09 19:13:59.217 Registering MythMusic Media Handler as a media handler SIP listening on IP Address 192.168.123.8:5060 NAT address 192.168.123.8 SIP: Cannot register; proxy, username or password not set 2006-03-09 19:14:27.582 Starting media monitor. 2006-03-09 19:15:04.589 New DB connection, total: 2 2006-03-09 19:15:04.635 Connecting to backend server: 192.168.123.8:6543 (try 1 of 5) 2006-03-09 19:15:04.643 Using protocol version 15 2006-03-09 19:15:04.691 Using protocol version 15 2006-03-09 19:15:09.958 taking too long to be allowed to read.. 2006-03-09 19:15:18.802 Waited 4 seconds for data to become available, waiting again... 2006-03-09 19:15:22.811 Waited 4 seconds for data to become available, waiting again... 2006-03-09 19:15:27.719 Waited 4 seconds for data to become available, waiting again... 2006-03-09 19:15:32.771 Waited 4 seconds for data to become available, waiting again... 2006-03-09 19:15:38.707 Waited 4 seconds for data to become available, waiting again... 2006-03-09 19:15:42.711 Waited 4 seconds for data to become available, waiting again... 2006-03-09 19:15:42.828 Opening audio device '/dev/dsp'. 2006-03-09 19:15:42.828 Opening OSS audio device '/dev/dsp'. *** * Couldn't find Xv support, falling back to non-Xv mode. * MythTV performance will be much slower since color * conversion and scaling will be done in software. * Consider upgrading your video card or X server if * you would like better performance. 2006-03-09 19:15:42.978 Couldn't get the color key color, and we need it. You likely won't get any video. 2006-03-09 19:15:43.361 Video timing method: RTC 2006-03-09 19:15:43.362 Using realtime priority. 2006-03-09 19:15:43.403 Changing from None to WatchingLiveTV 2006-03-09 19:15:50.743 Waited 4 seconds for data to become available, waiting again... 2006-03-09 19:15:53.299 prebuffering pause 2006-03-09 19:15:57.087 Waited 4 seconds for data to become available, waiting again... 2006-03-09 19:16:02.724 Waited 4 seconds for data to become available, waiting again... 2006-03-09 19:16:09.064 Waited 4 seconds for data to become available, waiting again... *** * Your system is not capable of displaying the * full framerate at 1024x768 resolution. Frames * will be skipped in order to keep the audio and * video in sync. 2006-03-09 19:16:13.373 prebuffering pause 2006-03-09 19:16:16.756 Waited 4 seconds for data to become available, waiting again... 2006-03-09 19:16:20.760 Waited 4 seconds for data to become available, waiting again... 2006-03-09 19:16:24.764 Waited 4 seconds for data to become available, waiting again... 2006-03-09 19:16:25.474 RemoteFile::Read() failed in RingBuffer::safe_read(). 2006-03-09 19:16:26.028 prebuffering pause 2006-03-09 19:16:29.608 Waited 4 seconds for data to become available, waiting again... 2006-03-09 19:16:33.613 Waited 4 seconds for data to become available, waiting again... 2006-03-09 19:16:34.730 GetNextFreeFrame() served a busy frame. Dropping. #Frames=32/31. 2006-03-09 19:16:38.749 Waited 4 seconds for data to become available, waiting again... 2006-03-09 19:16:39.119 GetNextFreeFrame() served a busy frame. Dropping. #Frames=31/31. 2006-03-09 19:16:40.014 prebuffering pause 2006-03-09 19:16:43.173 Waited 4 seconds for data to become available, waiting again... 2006-03-09 19:16:47.177 Waited 4 seconds for data to become available, waiting again... 2006-03-09 19:16:48.692 GetNextFreeFrame() served a busy frame. Dropping. #Frames=30/31. 2006-03-09 19:16:49.111 prebuffering pause 2006-03-09 19:16:52.761 Waited 4 seconds for data to become available, waiting again... 2006-03-09 19:16:56.765 Waited 4 seconds for data to become available, waiting again... 2006-03-09 19:16:57.705 prebuffering pause 2006-03-09 19:17:01.257 Waited 4 seconds for data to become available, waiting again... 2006-03-09 19:17:02.692 prebuffering pause 2006-03-09 19:17:06.277 Waited 4 seconds for data to become available, waiting again... 2006-03-09 19:17:10.282 Waited 4 seconds for data to become available, waiting again... 2006-03-09 19:17:14.290 Waited 4 seconds for data to become available, waiting again... 2006-03-09 19:17:15.278 RemoteFile::Read() failed in RingBuffer::safe_read(). 2006-03-09 19:17:15.869 prebuffering pause 2006-03-09 19:17:19.426 Waited 4 seconds for data to become available, waiting again... 2006-03-09 19:17:23.434 Waited 4 seconds for data to become available, waiting again... 2006-03-09 19:17:27.438 Waited 4 seconds for data to become available, waiting again... 2006-03-09 19:17:28.691 RemoteFile::Read() failed in RingBuffer::safe_read(). 2006-03-09 19:17:29.340 prebuffering pause 2006-03-09 19:17:33.205 prebuffering pause 2006-03-09 19:17:36.762 Waited 4 seconds for data to become available, waiting again... 2006-03-09 19:17:42.738 Waited 4 seconds for data to become available, waiting again... 2006-03-09 19:17:46.858 prebuffering pause 2006-03-09 19:17:50.427 Waited 4 seconds for data to become available, waiting again... 2006-03-09 19:17:54.899 Waited 4 seconds for data to become available, waiting again... 2006-03-09 19:17:55.877 prebuffering pause 2006-03-09 19:17:59.491 Waited 4 seconds for data to become available, waiting again... 2006-03-09 19:18:02.158 prebuffering pause 2006-03-09 19:18:05.803 Waited 4 seconds for data to become available, waiting again... 2006-03-09 19:18:10.543 Waited 4 seconds for data to become available, waiting again... 2006-03-09 19:18:14.547 Waited 4 seconds for data to become available, waiting again... 2006-03-09 19:18:15.268 prebuffering pause 2006-03-09 19:18:18.747 Waited 4 seconds for data to become available, waiting again... 2006-03-09 19:18:24.180 Waited 4 seconds for data to become available, waiting again... 2006-03-09 19:18:27.114 prebuffering pause 2006-03-09 19:18:30.744 Waited 4 seconds for data to become available, waiting again... 2006-03-09 19:18:35.636 Waited 4 seconds for data to become available, waiting again... 2006-03-09 19:18:37.110 prebuffering pause 2006-03-09 19:18:44.728 Waited 4 seconds for data to become available, waiting again... 2006-03-09 19:18:46.905 prebuffering pause 2006-03-09 19:18:50.732 Waited 4 seconds for data to become available, waiting again... 2006-03-09 19:18:51.540 Couldn't get the color key color, and we need it. You likely won't get any video. 2006-03-09 19:18:52.452 Waited too long for ringbuffer pause.. 2006-03-09 19:18:53.456 Waited too long for ringbuffer pause.. 2006-03-09 19:18:53.949 Changing from WatchingLiveTV to None 2006-03-09 19:18:53.956 Changing from None to None Small "burps" of audio seem to come through as it moves to the next "slide", so once it is working I think audio should be OK. Thanks again. Victor |
|
| Author: | vabiro [ Fri Mar 10, 2006 2:24 pm ] |
| Post subject: | |
Hi again, I thought I'd take another run at it today, and I'm still having problems. In the interest of providing as much info as possible, here is the IVTV init (output of dmesg | grep ivtv) Quote: ivtv: ==================== START INIT IVTV ====================
ivtv: version 0.4.3 (tagged release) loading ivtv: Linux version: 2.6.13.2-chw-3 SMP preempt 586 gcc-3.3 ivtv: In case of problems please include the debug info between ivtv: the START INIT IVTV and END INIT IVTV lines, along with ivtv: any module options, when mailing the ivtv-users mailinglist. ivtv0: Autodetected WinTV PVR 150 card (cx23416 based) tveeprom: ivtv version ivtv0: i2c attach to card #0 ok [client=tveeprom, addr=50] tuner (ivtv): chip found at addr 0xc0 i2c-bus ivtv i2c driver #0 ivtv0: i2c attach to card #0 ok [client=(tuner unset), addr=60] tuner (ivtv): chip found at addr 0xc2 i2c-bus ivtv i2c driver #0 ivtv0: i2c attach to card #0 ok [client=(tuner unset), addr=61] cx25840 1-0044: ivtv driver cx25840 1-0044: cx25843-23 found @ 0x88 (ivtv i2c driver #0) ivtv0: i2c attach to card #0 ok [client=cx25840, addr=44] wm8775 1-001b: ivtv driver wm8775 1-001b: chip found @ 0x36 (ivtv i2c driver #0) ivtv0: i2c attach to card #0 ok [client=wm8775, addr=1b] tda9887 1-0043: (ivtv) chip found @ 0x86 (ivtv i2c driver #0) ivtv0: i2c attach to card #0 ok [client=tda9887, addr=43] ivtv0: This is the first unit of a PVR500 ivtv0: Detected a TEA5767 radio tuner. Enabling radio support. ivtv0: loaded v4l-cx2341x-enc.fw firmware (262144 bytes) ivtv0: Encoder revision: 0x02050032 ivtv0: Allocate DMA encoder MPEG stream: 128 x 32768 buffers (4096KB total) ivtv0: Allocate DMA encoder YUV stream: 194 x 10800 buffers (2048KB total) ivtv0: Allocate DMA encoder VBI stream: 120 x 17472 buffers (2048KB total) ivtv0: Allocate DMA encoder PCM audio stream: 455 x 4608 buffers (2048KB total) ivtv0: Create encoder radio stream tuner: type set to 57 (Philips FQ1236A MK4) by ivtv i2c driver #0 ivtv0: Initialized WinTV PVR 500 (unit #1), card #0 ivtv: ====================== NEXT CARD ====================== ivtv1: Autodetected WinTV PVR 150 card (cx23416 based) tveeprom: ivtv version ivtv1: i2c attach to card #1 ok [client=tveeprom, addr=50] tuner (ivtv): chip found at addr 0xc2 i2c-bus ivtv i2c driver #1 ivtv1: i2c attach to card #1 ok [client=(tuner unset), addr=61] cx25840 2-0044: ivtv driver cx25840 2-0044: cx25843-23 found @ 0x88 (ivtv i2c driver #1) ivtv1: i2c attach to card #1 ok [client=cx25840, addr=44] wm8775 2-001b: ivtv driver wm8775 2-001b: chip found @ 0x36 (ivtv i2c driver #1) ivtv1: i2c attach to card #1 ok [client=wm8775, addr=1b] tda9887 2-0043: (ivtv) chip found @ 0x86 (ivtv i2c driver #1) ivtv1: i2c attach to card #1 ok [client=tda9887, addr=43] ivtv1: This is the first unit of a PVR500 ivtv1: loaded v4l-cx2341x-enc.fw firmware (262144 bytes) ivtv1: Encoder revision: 0x02050032 ivtv1: Allocate DMA encoder MPEG stream: 128 x 32768 buffers (4096KB total) ivtv1: Allocate DMA encoder YUV stream: 194 x 10800 buffers (2048KB total) ivtv1: Allocate DMA encoder VBI stream: 120 x 17472 buffers (2048KB total) ivtv1: Allocate DMA encoder PCM audio stream: 455 x 4608 buffers (2048KB total) ivtv1: Create encoder radio stream tuner: type set to 57 (Philips FQ1236A MK4) by ivtv i2c driver #1 ivtv1: Initialized WinTV PVR 500 (unit #1), card #1 ivtv: ==================== END INIT IVTV ==================== Victor |
|
| Author: | vabiro [ Sun Mar 19, 2006 10:42 am ] |
| Post subject: | |
Bump |
|
| Author: | tjc [ Sun Mar 19, 2006 11:35 am ] |
| Post subject: | |
Try R5B7, be sure to drop all your card definitions in mythtv-setup and rrecreate them. There's more here under "After the install (phase 2):" http://mysettopbox.tv/phpBB2/viewtopic.php?t=9069 |
|
| Author: | vabiro [ Mon Mar 20, 2006 10:30 am ] |
| Post subject: | |
Hi, Thanks for bringing R5B7 to my attention. Somehow I overlooked the release. I went through the instruction on the thread that you provided. Fortunately, I was starting from scratch, so I could do a new install and then make the changes that they suggest to /etc/modules, recreate the cards in mythtv-setup, reboot, then give it a try. Unfortunately, it's still not working for me. In the mythbackend.log, here is the output when I try to watch TV: Quote: 2006-03-20 11:12:45.418 Using runtime prefix = /usr 2006-03-20 11:12:45.680 New DB connection, total: 1 2006-03-20 11:12:45.710 Connected to database 'mythconverg' at host: localhost 2006-03-20 11:12:45.749 Current Schema Version: 1123 Starting up as the master server. 2006-03-20 11:12:47.540 New DB connection, total: 2 2006-03-20 11:12:47.544 Connected to database 'mythconverg' at host: localhost 2006-03-20 11:12:47.632 New DB connection, total: 3 2006-03-20 11:12:47.649 Connected to database 'mythconverg' at host: localhost 2006-03-20 11:12:48.006 New DB scheduler connection 2006-03-20 11:12:48.010 Connected to database 'mythconverg' at host: localhost 2006-03-20 11:12:48.615 mythbackend version: 0.19.20060121-2 www.mythtv.org 2006-03-20 11:12:48.627 Enabled verbose msgs: important general 2006-03-20 11:12:48.654 AutoExpire: Found 2 recorders w/max rate of 144 MiB/min 2006-03-20 11:12:48.658 AutoExpire: Required Free Space: 3.1 GB w/freq: 10 min 2006-03-20 11:12:50.117 Reschedule requested for id -1. 2006-03-20 11:12:51.253 Scheduled 0 items in 1.1 = 1.13 match + 0.01 place 2006-03-20 11:12:51.262 Seem to be woken up by USER 2006-03-20 11:12:57.415 Running HouseKeeping 2006-03-20 11:13:10.657 MainServer::HandleAnnounce Monitor 2006-03-20 11:13:10.660 adding: mythtvserver as a client (events: 0) 2006-03-20 11:13:10.699 MainServer::HandleAnnounce Playback 2006-03-20 11:13:10.709 adding: mythtvserver as a client (events: 0) 2006-03-20 11:13:10.714 MainServer::HandleAnnounce Monitor 2006-03-20 11:13:10.723 adding: mythtvserver as a client (events: 1) 2006-03-20 11:13:10.747 TVRec(1): Changing from None to WatchingLiveTV 2006-03-20 11:13:11.263 Can't enable VBI recording (2) vbi: Invalid argument 2006-03-20 11:13:32.861 TVRec(1): Changing from WatchingLiveTV to None 2006-03-20 11:13:34.408 Finished recording Unknown: channel 1990 Actually that is the log from boot-up to trying to watch, and then it failing. I'm a bit puzzled by the line "2006-03-20 11:13:34.408 Finished recording Unknown: channel 1990". I have the cards configured to switch/start at channel 3, just to see if I can view any input. In fact, my satellite provider's (ExpressVu) doesn't even have a channel 1990. Earlier log entries also mentioned a scheduled recording on ch 615, and attempted to change the tuner to that channel. Here is the output from mythfrontend Quote: 2006-03-20 11:45:24.543 Using runtime prefix = /usr
2006-03-20 11:45:24.572 New DB connection, total: 1 2006-03-20 11:45:24.575 Connected to database 'mythconverg' at host: localhost 2006-03-20 11:45:24.577 Total desktop dim: 1024x768, with 1 screen[s]. 2006-03-20 11:45:24.581 Using screen 0, 1024x768 at 0,0 2006-03-20 11:45:24.587 Current Schema Version: 1123 2006-03-20 11:45:24.588 mythfrontend version: 0.19.20060121-2 www.mythtv.org 2006-03-20 11:45:24.588 Enabled verbose msgs: important general 2006-03-20 11:45:24.763 lang0: eng 2006-03-20 11:45:24.763 lang: eng 2006-03-20 11:45:24.774 lang1: eng 2006-03-20 11:45:24.774 lang: eng 2006-03-20 11:45:24.883 Total desktop dim: 1024x768, with 1 screen[s]. 2006-03-20 11:45:24.885 Using screen 0, 1024x768 at 0,0 2006-03-20 11:45:24.886 Switching to square mode (Titivillus) 2006-03-20 11:45:25.269 Joystick disabled. 2006-03-20 11:45:25.317 Registering Internal as a media playback plugin. 2006-03-20 11:45:25.357 Registering MythDVD DVD Media Handler as a media handler 2006-03-20 11:45:25.358 Registering MythDVD VCD Media Handler as a media handler 2006-03-20 11:45:26.512 Registering MythMusic Media Handler as a media handler 2006-03-20 11:45:26.628 New DB connection, total: 2 2006-03-20 11:45:27.232 Starting media monitor. 2006-03-20 11:45:27.254 Connected to database 'mythconverg' at host: localhost SIP listening on IP Address 192.168.123.8:5060 NAT address 192.168.123.8 SIP: Cannot register; proxy, username or password not set 2006-03-20 11:45:32.844 Connecting to backend server: 127.0.0.1:6543 (try 1 of 5) 2006-03-20 11:45:32.852 Using protocol version 26 2006-03-20 11:45:32.879 TV: Attempting to change from None to WatchingLiveTV 2006-03-20 11:45:32.891 Using protocol version 26 2006-03-20 11:45:33.136 RingBuf(/myth/tv/1990_20060320114533.mpg): Invalid file (fd 16) when opening '/myth/tv/1990_20060320114533.mpg'. 12 retries remaining. 2006-03-20 11:45:33.638 RingBuf(/myth/tv/1990_20060320114533.mpg): Invalid file (fd 16) when opening '/myth/tv/1990_20060320114533.mpg'. 11 retries remaining. 2006-03-20 11:45:34.141 RingBuf(/myth/tv/1990_20060320114533.mpg): Invalid file (fd 16) when opening '/myth/tv/1990_20060320114533.mpg'. 10 retries remaining. 2006-03-20 11:45:34.644 RingBuf(/myth/tv/1990_20060320114533.mpg): Invalid file (fd 16) when opening '/myth/tv/1990_20060320114533.mpg'. 9 retries remaining. 2006-03-20 11:45:35.147 RingBuf(/myth/tv/1990_20060320114533.mpg): Invalid file (fd 16) when opening '/myth/tv/1990_20060320114533.mpg'. 8 retries remaining. 2006-03-20 11:45:41.486 RingBuf(/myth/tv/1990_20060320114533.mpg): Waited 2 seconds for data to become available... 2006-03-20 11:45:41.486 Checking to see if there's a new livetv program to switch to.. 2006-03-20 11:45:43.545 RingBuf(/myth/tv/1990_20060320114533.mpg): Waited 2 seconds for data to become available... 2006-03-20 11:45:43.546 Checking to see if there's a new livetv program to switch to.. 2006-03-20 11:45:49.287 RingBuf(/myth/tv/1990_20060320114533.mpg): Waited 2 seconds for data to become available... 2006-03-20 11:45:49.287 Checking to see if there's a new livetv program to switch to.. 2006-03-20 11:45:51.305 RingBuf(/myth/tv/1990_20060320114533.mpg): Waited 4 seconds for data to become available... 2006-03-20 11:45:51.305 Checking to see if there's a new livetv program to switch to.. 2006-03-20 11:45:55.336 RingBuf(/myth/tv/1990_20060320114533.mpg): Waited 8 seconds for data to become available... 2006-03-20 11:45:55.336 Checking to see if there's a new livetv program to switch to.. 2006-03-20 11:45:55.703 TV Error: StartPlayer(): NVP is not playing after 20000 msec 0: start_time: 0.036 duration: 8589.932 1: start_time: 0.026 duration: 0.004 stream: start_time: 0.289 duration: 95443.795 bitrate=0 kb/s 2006-03-20 11:45:55.860 AFD: Opened codec 0x8249360, id(MPEG2VIDEO) type(Video) 2006-03-20 11:45:55.888 AFD: Opened codec 0x8248470, id(MP2) type(Audio) 2006-03-20 11:45:55.891 Opening audio device '/dev/dsp'. 2006-03-20 11:45:55.891 Opening OSS audio device '/dev/dsp'. 2006-03-20 11:45:57.597 VideoOutputXv Error: Could not find suitable XVideo surface. 2006-03-20 11:45:57.597 VideoOutputXv: Falling back to X shared memory video output. *** May be slow *** 2006-03-20 11:45:58.327 Using realtime priority. 2006-03-20 11:45:58.427 Video timing method: USleep with busy wait 2006-03-20 11:45:58.648 TV Error: LiveTV not successfully started 2006-03-20 11:46:03.273 Event socket closed. No connection to the backend. I am baffled. Any other suggestions? Thanks in advance, Victor |
|
| Author: | vabiro [ Tue Mar 21, 2006 10:18 pm ] |
| Post subject: | |
Hi, I think I have nailed it down to an IRQ issue. I appreciate the feedback I have received, and understand it is no longer a KnoppMyth issue, so off topic and not apropriate for this forum. Having said that, any suggestions on places to look for a way to resolve this would be appreciated. Regards, Victor |
|
| Page 1 of 1 | All times are UTC - 6 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|