| LinHES Forums http://forums.linhes.org/ |
|
| Help, need dvb-fe-bcm3510-01.fw http://forums.linhes.org/viewtopic.php?f=14&t=9089 |
Page 1 of 1 |
| Author: | syracuse [ Sun Mar 19, 2006 1:17 pm ] |
| Post subject: | Help, need dvb-fe-bcm3510-01.fw |
I've recently installed a first gen Air2PC card using R5A30.2. On bootup scrolling info, I see that it complained about not finding dvb-fe-bcm3510-01.fw. I can't find it anywhere, does anyone have it to post? I thought Mythtv0.19 included all drivers/firmware for the Air2PC, but apparently not. I grepped dmesg for flexcop: dmesg | grep flexcop b2c2-flexcop: B2C2 FlexcopII/II(b)/III digital TV receiver chip loaded successfully flexcop-pci: will use the HW PID filter. flexcop-pci: card revision 2 b2c2-flexcop: MAC address = 00:d0:d7:30:19:5b b2c2-flexcop: i2c master_xfer failed b2c2-flexcop: i2c master_xfer failed b2c2-flexcop: i2c master_xfer failed b2c2-flexcop: i2c master_xfer failed b2c2-flexcop: found the bcm3510 at i2c address: 0x0f b2c2-flexcop: initialization of 'Air2PC/AirStar 2 ATSC 1st generation' at the 'PCI' bus controlled by a 'FlexCopIIb' complete And for the heck of it, I used azap to see if I could see a station, but no luck: root@mythtv:/# azap WAXN using '/dev/dvb/adapter0/frontend0' and '/dev/dvb/adapter0/demux0' tuning to 689000000 Hz video pid 0x0000, audio pid 0x0000 status 00 | signal 0000 | snr 0000 | ber 00000000 | unc 00000000 | status 00 | signal 0000 | snr 0000 | ber 00000000 | unc 00000000 | status 00 | signal 0000 | snr 0000 | ber 00000000 | unc 00000000 | Thanks. |
|
| Author: | randomhtpcguy [ Mon Mar 20, 2006 7:31 pm ] |
| Post subject: | |
i have it but don't know how to post it. it goes here /lib/firmware/dvb-fe-bcm3510-01.fw my card is recognized in R5B7 without it, but haven't actually tried to use it yet. |
|
| Author: | syracuse [ Mon Mar 20, 2006 11:05 pm ] |
| Post subject: | |
Thanks for the offer  , another member (entourage) kindly placed it on his server for me to download. I've been away from Linux for quite while, but I assume you can place files on a web or ftp server and people can use wget to retrieve the file(s).
|
|
| Author: | syracuse [ Tue Mar 21, 2006 11:20 am ] |
| Post subject: | |
randomhtpcguy wrote: ...my card is recognized in R5B7 without it, but haven't actually tried to use it yet.
It recognized the card, but I believe R5A30.2 only had the frontend part and not the firmware. Maybe R5B7 includes the firmware now. I'm able to record, but not watch. Need to get it to recognize the (commwell 667T) CN400 VIA video. I need to get XFree 4.5 , unichrome pro drivers and recompile.... It doesn't like mplayer -vo xvmc. Used -vo x11 and it runs a 720x480 SD clip at 95% CPU... |
|
| Author: | ikolsteren [ Sun Mar 26, 2006 5:50 pm ] |
| Post subject: | Looking for the firmware as well |
My systems is complaining about the missing firmware dvb-fe-bcm3510-01.fw Anyone know where I can get it |
|
| Author: | syracuse [ Mon Mar 27, 2006 11:34 am ] |
| Post subject: | |
Check PM |
|
| Page 1 of 1 | All times are UTC - 6 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|