I have the Dvico FusionHDTV-RT 5 Lite and have tested it using both QAM and OTA on my R5D1 + 0.20 installation. Works fine, so I guess you can place an asterisk next to it in your lists
| LinHES Forums http://forums.linhes.org/ |
|
| Available Capture Cards/Devices (OTA/QAM) http://forums.linhes.org/viewtopic.php?f=15&t=14409 |
Page 1 of 2 |
| Author: | ik632 [ Thu Mar 01, 2007 11:56 am ] |
| Post subject: | Available Capture Cards/Devices (OTA/QAM) |
I'm in the process of rebuilding/building a new HD Myth box. My old box had 2 Air2PC rev 0.2 cards which I was using to capture OTA HD. This worked well, but sometimes got dropouts. I also have a pcHDTV hd-3000 which I know can capture QAM and I'll be using that and taking out one of the other cards I have in the box. While researching what was needed to get my stuff working I became interested in what all of the available cards were. I searched on here to find a few posts about specific cards, but there was no complete list of available cards for the masses to use. I wanted to start a post (maybe a sticky once it gets some useful information) where we can keep a list of available cards that we know as working. Please reply with cards that I've missed and include brand and model as well as PCI, PCI-E, or USB so they can be classified accordingly. Also note: I'm trying to verify that all cards in the list function. As I don't have the resources to buy each one and test myself I'm going to go on what I hear/read. If a card is verified it will get an * next to it's name. If it has not yet been verified, there will be no *. |
|
| Author: | ik632 [ Thu Mar 01, 2007 11:56 am ] |
| Post subject: | QAM Devices |
QAM Devices PCI
AVerMedia AVerTVHD MCE A180 Dvico FusionHDTV-RT 5 Lite Macro Image MDP-130 MyHD pcHDTV hd-3000 * pcHDTV hd-5500 *
Dvico FusionHDTV5 USB Gold KWORLD ATSC QAM USB
|
|
| Author: | ik632 [ Thu Mar 01, 2007 11:57 am ] |
| Post subject: | OTA Devices |
OTA Devices PCI
Air2PC Rev 1.0 * Airstar HD5000 AVerMedia AVerTVHD MCE A180 Dvico FusionHDTV-RT 5 Lite Macro Image MDP-130 MyHD pcHDTV hd-2000 pcHDTV hd-3000 pcHDTV hd-5500 * KWorld 110
KWORLD ATSC QAM USB
|
|
| Author: | Martian [ Thu Mar 01, 2007 1:10 pm ] |
| Post subject: | |
QAM and OTA Network Device(s): HDHomerun |
|
| Author: | turpie [ Thu Mar 01, 2007 4:20 pm ] |
| Post subject: | |
Are you after DVB tuners as well as ATSC? |
|
| Author: | slowtolearn [ Thu Mar 01, 2007 4:55 pm ] |
| Post subject: | |
I have the Dvico FusionHDTV-RT 5 Lite and have tested it using both QAM and OTA on my R5D1 + 0.20 installation. Works fine, so I guess you can place an asterisk next to it in your lists
|
|
| Author: | ik632 [ Thu Mar 01, 2007 6:41 pm ] |
| Post subject: | |
turpie wrote: Are you after DVB tuners as well as ATSC?
Yes, I'm looking to compile a complete list for those who are just starting out, or those who want to look into new hardware. |
|
| Author: | ik632 [ Thu Mar 01, 2007 6:42 pm ] |
| Post subject: | |
slowtolearn wrote: I have the Dvico FusionHDTV-RT 5 Lite and have tested it using both QAM and OTA on my R5D1 + 0.20 installation. Works fine, so I guess you can place an asterisk next to it in your lists
done, and done. Thanks. |
|
| Author: | tjc [ Thu Mar 01, 2007 8:46 pm ] |
| Post subject: | |
ik632 wrote: I'm looking to compile a complete list for those who are just starting out, or those who want to look into new hardware.
Have you considered updating the tuner card pages on the wiki? http://www.knoppmythwiki.org/index.php?page=TVCards http://www.knoppmythwiki.org/index.php? ... CardYouUse These could really use a maintainer... |
|
| Author: | thornsoft [ Thu Mar 01, 2007 9:44 pm ] |
| Post subject: | |
pcHDTV hd-3000 Airstar HD5000 KWorld 110 (only $38, through a deal with buy.com and google checkout!) (All PCI cards) In my situation, the Airstar HD5000 is the least reliable, in terms of signal lock and (lack of) breakups. I think I have lots of multipath interference, with my OTA setup. Since getting the driver loaded properly with R5E50, the KWorld has been very solid. |
|
| Author: | toronado455 [ Fri Mar 02, 2007 1:56 am ] |
| Post subject: | |
Is the Hauppauge WinTV-HVR-1600 still non-compatible with KnoppMyth? |
|
| Author: | ik632 [ Sat Mar 03, 2007 11:15 am ] |
| Post subject: | |
tjc wrote: ik632 wrote: I'm looking to compile a complete list for those who are just starting out, or those who want to look into new hardware. Have you considered updating the tuner card pages on the wiki? http://www.knoppmythwiki.org/index.php?page=TVCards http://www.knoppmythwiki.org/index.php? ... CardYouUse These could really use a maintainer... I can handle that. I'll get some more information here on the forum and then get to updating the wiki page. Thanks. |
|
| Author: | Ricky [ Mon Mar 26, 2007 8:14 pm ] |
| Post subject: | |
I can verify that the ATI HDTV Wonder works as a QAM device. It uses the same firmware as the AvertvHD and setup is the same. You can reference these threads for setup: http://mysettopbox.tv/phpBB2/viewtopic. ... order=asc& http://www.mysettopbox.tv/phpBB2/viewto ... t=avertvhd |
|
| Author: | Too Many Secrets [ Mon Apr 23, 2007 1:12 pm ] |
| Post subject: | |
Are there any ATSC USB sticks that work with KM? I was looking around and can't really find any. There are a couple that look promising for the future like the Hauppauge WinTV-HVR-950. I like the idea of adding another ATSC tuner without adding another power cable (wall wart), thus the USB stick. |
|
| Author: | ik632 [ Tue Apr 24, 2007 10:47 am ] |
| Post subject: | |
I'm getting ready to buy one of the HVR950's so I'll start playing around with that. I don't believe it's supported at this time but someone's got to take the jump. |
|
| Page 1 of 2 | All times are UTC - 6 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|