| LinHES Forums http://forums.linhes.org/ |
|
| HD HomeRun works out of the box? http://forums.linhes.org/viewtopic.php?f=15&t=14827 |
Page 1 of 2 |
| Author: | Too Many Secrets [ Thu Apr 05, 2007 9:31 am ] |
| Post subject: | HD HomeRun works out of the box? |
I'm looking to expand and wondering if the HomeRun works out of the box with R5E50? If it does, as I believe it should, this would be a great addition. They have a well supported forumfor the HDHR. Any experiences with HomeRun? Does it have any special network needs? (It shouldn't) The wikionly shows 3 people using the HDHR and I was looking for experiences (good, bad, ugly) with it as well. TIA |
|
| Author: | thornsoft [ Thu Apr 05, 2007 9:47 am ] |
| Post subject: | Re: HD HomeRun works out of the box? |
Too Many Secrets wrote: Does it have any special network needs? (It shouldn't)
I don't have one, but I'm intrigued by it. If I were using one, I'd probably put it on its own subnet, so that it wouldn't impact (or be impacted by) regular traffic on our home network. |
|
| Author: | spalVl [ Thu Apr 05, 2007 11:05 am ] |
| Post subject: | |
My experience with a HDHR and Comcast QAM is doesn't work out of the box KMR5E50. I never tried OTA though... That being said Knoppmyth is not the issue but rather MythTV .20. The fix for me was recompiling MythTV from SVN. It is not hard to do following the guide on KnoppMyth wiki. After this change the HDHR is fine. I got my HDHR late 2006, so the fix for it may be included in MythTV fixes branch now, but that really won't help at this point as KMR5E50 isn't using that fixes branch. I am VERY happy with the device, but don't have a frontend powerful enough yet to output 1080 content and been using it for 480i TV mainly. Depending on your Cable provider the HDHR could be a pain to setup if they don't broadcast QAM channel data (Comcast didn't) that required a lot of editing to MySQL DB and time, although you could get lucky and someone has a QAM layout for your area. This problem is NOT specific to HDHR though, same issues exist with other QAM tuners. Search more in this forum for my posts and Silicondust forums for more info. I know I posted a pretty well detailed setup for someone on these forums. For network, I wired my house and everything is on 10/100. I did try the HDHR over 11mbs wireless and my laptop. On 11mbs wasn't too good, stutters and 1080 is poor, 54mbs is better but don't know if I would trust it espically if another machine is using the shared 54mbs. A few ppl have just added another NIC and done crossover cable to HDHR with DHCP on their MythTV boxes as well. |
|
| Author: | modemboy [ Thu Apr 05, 2007 4:03 pm ] |
| Post subject: | |
Worked fine for me out of the box with R5E50. Getting the guide data setup took a little bit but was not hard. Overall I highly recommend the HDHomeRun, it has worked very well for me so far. Using Comcast QAM and a gigabit switch. |
|
| Author: | Martian [ Thu Apr 05, 2007 6:13 pm ] |
| Post subject: | |
Just for the record you don't need a cross-over cable with the HDHomerun it's network port is auto sensing. Martian |
|
| Author: | ntlord [ Sat Apr 07, 2007 4:09 pm ] |
| Post subject: | |
It does not work out of the the box with QAM and R5E0. You need to upgrade to the latest head off the repository. Actually if you check the silicondust forums people reccomend particular revisions. |
|
| Author: | doog [ Sat Apr 07, 2007 4:31 pm ] |
| Post subject: | |
I'm pretty sure all of the necessary patches were backported to .20-fixes, you'll probably be better off using that rather than head. |
|
| Author: | ntlord [ Sun Apr 08, 2007 12:38 pm ] |
| Post subject: | |
As of when? Just asking because I know as of 3 months ago that was not the case. I would love to switch back to the fixes branch. actually I just checked the forum and it seems you are correct http://www.silicondust.com/forum/viewtopic.php?t=2749 |
|
| Author: | jimmyfergus [ Thu Apr 19, 2007 8:11 am ] |
| Post subject: | |
I can confirm that as of now (actually, 14 April I believe), the 0.20.fixes branch does allow you to use HDHomerun with QAM. I will update the wiki on doing this update when I can (I have written it, just haven't persuaded the wiki system to take my edits) Also, for me (Comcast MA), there now appears to be more metadata broadcast, or something, because my listings matched up in most cases without me having to do unpleasant things with tables and XML channel ids etc... I followed the instructions on hdhomerun.com |
|
| Author: | opel70 [ Thu Apr 19, 2007 9:24 am ] |
| Post subject: | |
Hmmm, I don't have my HDHR anymore (sold it to my brother-in-law), but I had it for the end of football season and it worked perfectly for me with a stock R5E50 system, pulling QAM from my Comcast cable. My guess is that whether it works with the stock R5E50 will depend on your particular local Comcast distribution center. |
|
| Author: | rothgar [ Sun Apr 22, 2007 9:12 pm ] |
| Post subject: | |
my HDHR has been working out of the box since r5e50. I have been using QAM with adelphia/time warner cable. I had to edit the channels to have guide information but it wasn't too hard using mythweb. |
|
| Author: | jimmyfergus [ Mon Apr 23, 2007 5:38 am ] |
| Post subject: | |
Argh - other threads said you had to upgrade, so I did it without trying the default... I wonder what that was all about. I saw a commit on 14th April which looked relevant, so perhaps it's only worth trying an upgrade to MythTV if something isn't working. |
|
| Author: | RichardBronosky [ Tue Jun 05, 2007 10:09 pm ] |
| Post subject: | |
PLEASE POST HDHOMERUN SETUP INSTRUCTIONS!!! I am a Comcast (Atlanta, GA) user, I've had my HDHOMERUN since Christmas and it has never worked. |
|
| Author: | Too Many Secrets [ Tue Jun 05, 2007 10:21 pm ] |
| Post subject: | |
Have you tried the wiki? or the HDHOMERUN forum, they seem very helpful? |
|
| Author: | Too Many Secrets [ Sun Aug 12, 2007 12:46 pm ] |
| Post subject: | |
I'm resurrecting this thread as I'm having trouble getting qam to work on my HDHR running R5F1. I thought I got it working once, but now it locks but never shows picture and exits TV to main menu. I've got a KWorld 110 working with qam without problems, but no go on the HDHR. HDHR works just fine with OTA. My question I guess is does qam work out of the box with F1 on the HDHR? |
|
| Page 1 of 2 | All times are UTC - 6 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|