LinHES Forums
http://forums.linhes.org/

Panasonic LCD-TV: black screen instead of a recording
http://forums.linhes.org/viewtopic.php?f=15&t=15087		 Page 1 of 1
Author:  elol [ Tue May 01, 2007 12:40 pm ]
Post subject:  Panasonic LCD-TV: black screen instead of a recording
Hello

I have just bought a Panasonic LCD-TV (LMD 70F - 32") which of course should get connected with my Mythbox.

Well, I tried to connect the mythbox via
* VGA
* DVI graphic card output to the Panasonic HDMI input
* Component

Of course, the latter connection is the one I had on my CRT and looks nasty on such a big screen. Currently it's the only way I get a picture, b/c VGA and HDMI do not work.

The reason why VGA and HDMI do not work is simple:
I changed the modelines as described in numerous ways in the /etc/X11/xorg.conf File, but the result is negative.
The frontend works, the preview picture for the recordings works, but I cannot see any of the recordings, i.e. I get a black picture.
In addition the whole Mythbox, seems to freeze, I cannot connect via Putty, nor does it response to any keyboard commands. In this case, I have to brutally turn off the Mythbox.

What actually surprises me, is the fact that the VGA-output to a PC-Monitor used to work before...

Now, is there a simple explaination how to fix this connection problem?
Author:  manicmike [ Mon May 07, 2007 12:18 am ]
Post subject:  Re: Panasonic LCD-TV: black screen instead of a recording
elol wrote:
Hello

I have just bought a Panasonic LCD-TV (LMD 70F - 32") which of course should get connected with my Mythbox.

Well, I tried to connect the mythbox via
* VGA
* DVI graphic card output to the Panasonic HDMI input
* Component

Of course, the latter connection is the one I had on my CRT and looks nasty on such a big screen. Currently it's the only way I get a picture, b/c VGA and HDMI do not work.

The reason why VGA and HDMI do not work is simple:
I changed the modelines as described in numerous ways in the /etc/X11/xorg.conf File, but the result is negative.
The frontend works, the preview picture for the recordings works, but I cannot see any of the recordings, i.e. I get a black picture.
In addition the whole Mythbox, seems to freeze, I cannot connect via Putty, nor does it response to any keyboard commands. In this case, I have to brutally turn off the Mythbox.

What actually surprises me, is the fact that the VGA-output to a PC-Monitor used to work before...

Now, is there a simple explaination how to fix this connection problem?


You can start by supplying detail of your hardware. Also, you haven't mentioned the modeline you use for your CRT. Finally what does your xorg.conf say in the monitor device section?

I have a Panasonic 32" LCD (600A) and it works amazingly well with Knoppmyth using the VGA input. Unless you give us some relevant information, it's not possible to help.

Mike
Author:  elol [ Mon May 07, 2007 9:00 pm ]
Post subject:  Re: Panasonic LCD-TV: black screen instead of a recording
manicmike wrote:

You can start by supplying detail of your hardware. Also, you haven't mentioned the modeline you use for your CRT. Finally what does your xorg.conf say in the monitor device section?

I have a Panasonic 32" LCD (600A) and it works amazingly well with Knoppmyth using the VGA input. Unless you give us some relevant information, it's not possible to help.

Mike


Here's a copy from the monitor device section of my xorg.conf:

Code:
Section "InputDevice"
        Identifier      "Configured Mouse"
        Driver          "mouse"
        Option          "CorePointer"
        Option          "Device"                "/dev/input/mice"
        Option          "Protocol"              "ImPS/2"
        Option          "Emulate3Buttons"       "true"
EndSection

Section "Device"
        Identifier      "Generic Video Card"
        Driver          "vesa"
        BusID           "PCI:1:0:0"
EndSection

Section "Monitor"
        Identifier      "Generic Monitor"
        Option          "DPMS"
        HorizSync       30-100
        VertRefresh     50-160
EndSection

Section "Screen"
        Identifier      "Default Screen"
        Device          "Generic Video Card"
        Monitor         "Generic Monitor"
        DefaultDepth    24
        SubSection "Display"
                Depth           1
                Modes           "1920x1440" "1920x1200" "1856x1392" "1792x1344" "1680x1050" "1600
        EndSubSection
        SubSection "Display"
                Depth           4
                Modes           "1920x1440" "1920x1200" "1856x1392" "1792x1344" "1680x1050" "1600
        EndSubSection



After tweaking around, I just stayed with the original file. For that reason you will only find default settings. Regarding the Video Card, I have a ASUS 9250 TD.
Author:  manicmike [ Tue May 08, 2007 5:55 pm ]
Post subject:  Re: Panasonic LCD-TV: black screen instead of a recording
Code:
Section "Monitor"
        Identifier      "Generic Monitor"
        Option          "DPMS"
        HorizSync       30-100
        VertRefresh     50-160
EndSection


The VertRefresh is far too big for a TV. Change it to 50.0 - 75.0

Code:
Section "Screen"
        Identifier      "Default Screen"
        Device          "Generic Video Card"
        Monitor         "Generic Monitor"
        DefaultDepth    24
        SubSection "Display"
                Depth           1
                Modes           "1920x1440" "1920x1200" "1856x1392" "1792x1344" "1680x1050" "1600
        EndSubSection
        SubSection "Display"
                Depth           4
                Modes           "1920x1440" "1920x1200" "1856x1392" "1792x1344" "1680x1050" "1600
        EndSubSection



These resolutions are waaay too large for any TV. The Panasonic probably has a maximum resolution of 1366x768 (if it's HD), so changing the line after "Depth 24" to "1024x768 800x600 640x480" will get you going.

The ATI cards are something of a new thing with Knoppmyth, support-wise. I've always gone with NVIDIA chipsets as their GPUs are all supported (for XvMC), but the above changes should get you going.

Mike
Author:  elol [ Fri May 11, 2007 4:51 am ]
Post subject: 
Sorry to tell you, but your advice did not work. I still have the same problem.
Author:  manicmike [ Fri May 11, 2007 5:55 pm ]
Post subject: 
elol wrote:
Sorry to tell you, but your advice did not work. I still have the same problem.


Do you get errors in ~mythtv/.xsession-errors?

Mike
Author:  elol [ Sat May 12, 2007 10:05 am ]
Post subject: 
manicmike wrote:
elol wrote:
Sorry to tell you, but your advice did not work. I still have the same problem.


Do you get errors in ~mythtv/.xsession-errors?

Mike


Well, I got a hell's load of errors, but don't know exactly what to look for....


In the meanwhile, after many hours of desparation, I would to tell you how I am currently hooking my mythbox to my TV (or at least how it worked with my old CRT-TV)

In order to get a Monitor-output, I cd /etc/X11
from there
rm xorg.conf
ln -s xorg.conf.pre350 xorg.conf

In order to get a TV-out from my Hauppauge 350, I cd /etc/X11
from there
rm xorg.conf
ln -s xorg.conf.350 xorg.conf


I can also provide the three involved files, which have been altered in some way to meet the Panasonic's specifications, but not completly:

xorg.conf

Code:
# /etc/X11/xorg.conf (xorg X Window System server configuration file)
#
# This file was generated by dexconf, the Debian X Configuration tool, using
# values from the debconf database.
#
# Edit this file with caution, and see the /etc/X11/xorg.conf manual page.
# (Type "man /etc/X11/xorg.conf" at the shell prompt.)
#
# This file is automatically updated on xserver-xorg package upgrades *only*
# if it has not been modified since the last upgrade of the xserver-xorg
# package.
#
# If you have edited this file but would like it to be automatically updated
# again, run the following command:
#   sudo dpkg-reconfigure -phigh xserver-xorg

Section "Files"
        FontPath        "/usr/share/fonts/X11/misc"
        FontPath        "/usr/X11R6/lib/X11/fonts/misc"
        FontPath        "/usr/share/fonts/X11/cyrillic"
        FontPath        "/usr/X11R6/lib/X11/fonts/cyrillic"
        FontPath        "/usr/share/fonts/X11/100dpi/:unscaled"
        FontPath        "/usr/X11R6/lib/X11/fonts/100dpi/:unscaled"
        FontPath        "/usr/share/fonts/X11/75dpi/:unscaled"
        FontPath        "/usr/X11R6/lib/X11/fonts/75dpi/:unscaled"
        FontPath        "/usr/share/fonts/X11/Type1"
        FontPath        "/usr/X11R6/lib/X11/fonts/Type1"
        FontPath        "/usr/share/fonts/X11/100dpi"
        FontPath        "/usr/X11R6/lib/X11/fonts/100dpi"
        FontPath        "/usr/share/fonts/X11/75dpi"
        FontPath        "/usr/X11R6/lib/X11/fonts/75dpi"
        # path to defoma fonts
        FontPath        "/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType"
EndSection

Section "Module"
        Load    "bitmap"
        Load    "dbe"
        Load    "ddc"
        Load    "dri"
        Load    "extmod"
        Load    "freetype"
        Load    "glx"
        Load    "int10"
        Load    "record"
        Load    "type1"
        Load    "v4l"
        Load    "vbe"
EndSection

Section "InputDevice"
        Identifier      "Generic Keyboard"
        Driver          "kbd"
        Option          "CoreKeyboard"
        Option          "XkbRules"      "xorg"
        Option          "XkbModel"      "pc104"
        Option          "XkbLayout"     "us"
EndSection

Section "InputDevice"
        Identifier      "Configured Mouse"
        Driver          "mouse"
        Option          "CorePointer"
        Option          "Device"                "/dev/input/mice"
        Option          "Protocol"              "ImPS/2"
        Option          "Emulate3Buttons"       "true"
EndSection

Section "Device"
        Identifier      "Generic Video Card"
        Driver          "vesa"
        BusID           "PCI:1:0:0"
EndSection

Section "Monitor"
        Identifier      "Generic Monitor"
        Option          "DPMS"
        HorizSync       30-100
        VertRefresh     50-160
EndSection

Section "Screen"
        Identifier      "Default Screen"
        Device          "Generic Video Card"
        Monitor         "Generic Monitor"
        DefaultDepth    24
        SubSection "Display"
                Depth           1
                Modes           "1920x1440" "1920x1200" "1856x1392" "1792x1344" "1680x1050" "1600x1200" "1440x900" "1400x1050"
        EndSubSection
        SubSection "Display"
                Depth           4
                Modes           "1920x1440" "1920x1200" "1856x1392" "1792x1344" "1680x1050" "1600x1200" "1440x900" "1400x1050"
        EndSubSection
        SubSection "Display"
                Depth           8
                Modes           "1920x1440" "1920x1200" "1856x1392" "1792x1344" "1680x1050" "1600x1200" "1440x900" "1400x1050"
        EndSubSection
        SubSection "Display"
                Depth           15
                Modes           "1920x1440" "1920x1200" "1856x1392" "1792x1344" "1680x1050" "1600x1200" "1440x900" "1400x1050"
        EndSubSection
        SubSection "Display"
                Depth           16
                Modes           "1920x1440" "1920x1200" "1856x1392" "1792x1344" "1680x1050" "1600x1200" "1440x900" "1400x1050"
        EndSubSection
        SubSection "Display"
                Depth           24
                Modes           "1920x1440" "1920x1200" "1856x1392" "1792x1344" "1680x1050" "1600x1200" "1440x900" "1400x1050"
        EndSubSection
EndSection

Section "ServerLayout"
        Identifier      "Default Layout"
        Screen          "Default Screen"
        InputDevice     "Generic Keyboard"
        InputDevice     "Configured Mouse"
EndSection

Section "DRI"
        Mode    0666
EndSection



xorg.conf 350

Code:
Cannot open master side of pty: No such file or directory (2)
xorg.conf.350      [----]  0 L:[  1+ 0   1/141] *(0   /4540b)= S  83 0x53
Section "ServerLayout"
        Identifier     "XFree86 Configured"
        Screen      0  "TV Screen" 0 0
        InputDevice    "Keyboard0" "CoreKeyboard"
# PS/2 Mouse not detected
# Serial Mouse not detected
        InputDevice    "USB Mouse" "CorePointer"
EndSection

Section "ServerFlags"
        Option "AllowMouseOpenFail"  "true"

EndSection

Section "Files"
        RgbPath      "/usr/share/X11/rgb"
        ModulePath   "/usr/lib/xorg/modules"
        FontPath     "/usr/share/fonts/X11/misc:unscaled"
        FontPath     "/usr/share/fonts/X11/75dpi:unscaled"
        FontPath     "/usr/share/fonts/X11/100dpi:unscaled"
        FontPath     "/usr/share/fonts/X11/Type1"
        FontPath     "/usr/share/fonts/X11/Speedo"
        FontPath     "/usr/share/fonts/X11/PEX"
# Additional fonts: Locale, Gimp, TTF...
        FontPath     "/usr/share/fonts/X11/cyrillic"
#       FontPath     "/usr/share/fonts/X11/latin2/75dpi"
#       FontPath     "/usr/share/fonts/X11/latin2/100dpi"
# True type and type1 fonts are also handled via xftlib, see /etc/X11/XftConfig!
        FontPath     "/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType"
        FontPath     "/usr/share/fonts/truetype"
        FontPath     "/usr/share/fonts/latex-ttf-fonts"
EndSection

Section "Module"
# Comments: see http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=346408
        Load  "dbe" # Double Buffering Extension, very important.
        Load  "dri" # This shouldn't be available choice if user has selected driver vga, vesa or nv.
        Load  "glx" # GLX Extension.
        Load  "freetype" # Freetype fonts.
        Load  "type1"  # Type 1 fonts
        Load  "record" # Developer extension, usually not needed
#       Load  "extmod" # This is okay, but if you look into "man xorg.conf" you'll find option NOT to include DGA extension wi
        SubSection      "extmod"
                Option          "omit xfree86-dga"
        EndSubSection
#       Load  "speedo" # Speedo fonts, this module doesn't exist in Xorg 7.0.17
# The following are deprecated/unstable/unneeded in Xorg 7.0
#       Load  "ddc"  # ddc probing of monitor, this should be never present, as it gets automatically loaded.
#       Load  "GLcore" # This should be never present, as it gets automatically loaded.
#       Load  "bitmap" # Should be never present, as it gets automatically loaded. This is a font module, and loading it in xo
EndSection

Section "InputDevice"
        Identifier  "Keyboard0"
        Driver      "kbd"
        Option      "CoreKeyboard"
        Option "XkbRules" "xorg"
        Option "XkbModel" "pc105"
        Option "XkbLayout" "de"

EndSection

Section "InputDevice"
        Identifier  "Serial Mouse"
        Driver      "mouse"
        Option      "Protocol" "Microsoft"
        Option      "Device" "/dev/ttyS0"
        Option      "Emulate3Buttons" "true"
        Option      "Emulate3Timeout" "70"
        Option      "SendCoreEvents"  "true"
EndSection

Section "InputDevice"
        Identifier  "PS/2 Mouse"
        Driver      "mouse"
        Option      "Protocol" "auto"
Option          "ZAxisMapping"          "4 5"
        Option      "Device" "/dev/psaux"
        Option      "Emulate3Buttons" "true"
        Option      "Emulate3Timeout" "70"
        Option      "SendCoreEvents"  "true"
EndSection

Section "InputDevice"
        Identifier      "USB Mouse"
        Driver          "mouse"
        Option        â€ž       
        Option          "SendCoreEvents"        "true"
        Option          "Protocol"              "IMPS/2"
        Option          "ZAxisMapping"          "4 5"
        Option          "Buttons"               "5"
EndSection

# Auto-generated by KNOPPIX mkxf86config

Section "Monitor"
        Identifier  "PAL Monitor"
        HorizSync  30-50
        VertRefresh 60
        Mode "720x576"
          # D: 34.563 MHz, H: 37.244 kHz, V: 73.897 fresh 60
          DotClock 41.476
          HTimings 720 752 840 928
          VTimings 576 580 584 600
          Flags    "-HSync" "-VSync"
        EndMode
EndSection

Section "Device"
        Identifier      "Hauppauge PVR 350 iTVC15 Framebuffer"
        Driver          "ivtvdev"

        ### change fb1 to whatever number you got in the previous section
        Option          "fbdev" "/dev/fb1"
        Option          "VideoOverlay" "on"
        Option          "XVideo" "1"

        ### change the busid to whatever is reported by lspci. Note that
        ### output of lspci is hex, so add a preceding "0x" to the BusID
        BusID "PCI:2:9:0"

        Screen          0
EndSection

Section "Screen"
        Identifier  "TV Screen"
        Device      "Hauppauge PVR 350 iTVC15 Framebuffer"
        Monitor     "PAL Monitor"
        DefaultDepth 24
        DefaultFbBpp 32
        Subsection "Display"
         Depth 24
         FbBpp 32
         Modes "720x576"
        EndSubsection
EndSection


Section "DRI"
        Mode 0666
EndSection




xorg.conf pre350

Code:
Section "ServerLayout"
        Identifier     "XFree86 Configured"
        Screen      0  "Screen0" 0 0
        InputDevice    "Keyboard0" "CoreKeyboard"
# PS/2 Mouse not detected
# Serial Mouse not detected
        InputDevice    "USB Mouse" "CorePointer"
EndSection

Section "ServerFlags"
        Option "AllowMouseOpenFail"  "true"

EndSection

Section "Files"
        RgbPath      "/usr/share/X11/rgb"
        ModulePath   "/usr/lib/xorg/modules"
        FontPath     "/usr/share/fonts/X11/misc:unscaled"
        FontPath     "/usr/share/fonts/X11/75dpi:unscaled"
        FontPath     "/usr/share/fonts/X11/100dpi:unscaled"
        FontPath     "/usr/share/fonts/X11/Type1"
        FontPath     "/usr/share/fonts/X11/Speedo"
        FontPath     "/usr/share/fonts/X11/PEX"
# Additional fonts: Locale, Gimp, TTF...
        FontPath     "/usr/share/fonts/X11/cyrillic"
#       FontPath     "/usr/share/fonts/X11/latin2/75dpi"
#       FontPath     "/usr/share/fonts/X11/latin2/100dpi"
# True type and type1 fonts are also handled via xftlib, see /etc/X11/XftConfig!
        FontPath     "/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType"
        FontPath     "/usr/share/fonts/truetype"
        FontPath     "/usr/share/fonts/latex-ttf-fonts"
EndSection

Section "Module"
# Comments: see http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=346408
        Load  "dbe" # Double Buffering Extension, very important.
        Load  "dri" # This shouldn't be available choice if user has selected driver vga, vesa or nv.
        Load  "glx" # GLX Extension.
        Load  "freetype" # Freetype fonts.
        Load  "type1"  # Type 1 fonts
        Load  "record" # Developer extension, usually not needed
#       Load  "extmod" # This is okay, but if you look into "man xorg.conf" you'll find option NOT to include DGA extension wi
        SubSection      "extmod"
                Option          "omit xfree86-dga"
        EndSubSection
#       Load  "speedo" # Speedo fonts, this module doesn't exist in Xorg 7.0.17
# The following are deprecated/unstable/unneeded in Xorg 7.0
#       Load  "ddc"  # ddc probing of monitor, this should be never present, as it gets automatically loaded.
#       Load  "GLcore" # This should be never present, as it gets automatically loaded.
#       Load  "bitmap" # Should be never present, as it gets automatically loaded. This is a font module, and loading it in xo
EndSection

Section "InputDevice"
        Identifier  "Keyboard0"
        Driver      "kbd"
        Option      "CoreKeyboard"
        Option "XkbRules" "xorg"
        Option "XkbModel" "pc105"
        Option "XkbLayout" "de"

EndSection

Section "InputDevice"
        Identifier  "Serial Mouse"
        Driver      "mouse"
        Option      "Protocol" "Microsoft"
        Option      "Device" "/dev/ttyS0"
        Option      "Emulate3Buttons" "true"
        Option      "Emulate3Timeout" "70"
        Option      "SendCoreEvents"  "true"
EndSection

Section "InputDevice"
        Identifier  "PS/2 Mouse"
        Driver      "mouse"
        Option      "Protocol" "auto"
        Option          "ZAxisMapping"          "4 5"
        Option      "Device" "/dev/psaux"
        Option      "Emulate3Buttons" "true"
        Option      "Emulate3Timeout" "70"
        Option      "SendCoreEvents"  "true"
EndSection

Section "InputDevice"
        Identifier      "USB Mouse"
        Driver          "mouse"
        Option          "Device"                "/dev/input/mice"
        Option          "SendCoreEvents"        "true"
        Option          "Protocol"              "IMPS/2"
        Option          "ZAxisMapping"          "4 5"
        Option          "Buttons"               "5"
EndSection

# Auto-generated by KNOPPIX mkxf86config

Section "Monitor"
        Identifier      "Monitor0"
        Option          "DPMS"  "true"
        VendorName      "Panasonic"
        ModelName       "LMD 70F"
        DisplaySize     "577 325"
        HorizSync 30 - 70 # DDC-probed
        VertRefresh 50 - 85 # DDC-probed
        # 1024x768, 75.0Hz; hfreq=60.02, vfreq=75.03
        ModeLine "1024x768"      78.75 1024 1040 1136 1312  768  769  772  800 +hsync +vsync
        # 1024x768, 70.0Hz; hfreq=56.48, vfreq=70.07
        ModeLine "1024x768"      75.00 1024 1048 1184 1328  768  771  777  806 -hsync -vsync
        # 800x600, 75.0Hz; hfreq=46.88, vfreq=75.00
        ModeLine "800x600"       49.50  800  816  896 1056  600  601  604  625 +hsync +vsync
        # 800x600, 60.0Hz; hfreq=37.88, vfreq=60.32
        ModeLine "800x600"       40.00  800  840  968 1056  600  601  605  628 +hsync +vsync
        # 640x480, 75.0Hz; hfreq=37.50, vfreq=75.00
        ModeLine "640x480"       31.50  640  656  720  840  480  481  484  500 -hsync -vsync
        # 640x480, 72.0Hz; hfreq=37.86, vfreq=72.81
        ModeLine "640x480"       31.50  640  656  696  816  480  481  484  504 -hsync -vsync
        # 640x480, 60.0Hz; hfreq=31.47, vfreq=59.94
        ModeLine "640x480"       25.17  640  648  744  784  480  482  484  509 -hsync -vsync
        # Extended modelines with GTF timings
        # 640x480 @ 100.00 Hz (GTF) hsync: 50.90 kHz; pclk: 43.16 MHz
        ModeLine "640x480"  43.16  640 680 744 848  480 481 484 509  -HSync +Vsync
        # 768x576 @ 60.00 Hz (GTF) hsync: 35.82 kHz; pclk: 34.96 MHz
        ModeLine "768x576"  34.96  768 792 872 976  576 577 580 597  -HSync +Vsync
        # 768x576 @ 72.00 Hz (GTF) hsync: 43.27 kHz; pclk: 42.93 MHz
        ModeLine "768x576"  42.93  768 800 880 992  576 577 580 601  -HSync +Vsync
        # 768x576 @ 75.00 Hz (GTF) hsync: 45.15 kHz; pclk: 45.51 MHz
        ModeLine "768x576"  45.51  768 808 888 1008  576 577 580 602  -HSync +Vsync
        # 768x576 @ 85.00 Hz (GTF) hsync: 51.42 kHz; pclk: 51.84 MHz
        # 768x576 @ 100.00 Hz (GTF) hsync: 61.10 kHz; pclk: 62.57 MHz
        ModeLine "768x576"  62.57  768 816 896 1024  576 577 580 611  -HSync +Vsync
        # 800x600 @ 100.00 Hz (GTF) hsync: 63.60 kHz; pclk: 68.18 MHz
        ModeLine "800x600"  68.18  800 848 936 1072  600 601 604 636  -HSync +Vsync
        # 1024x768 @ 100.00 Hz (GTF) hsync: 81.40 kHz; pclk: 113.31 MHz
        ModeLine "1024x768"  113.31  1024 1096 1208 1392  768 769 772 814  -HSync +Vsync
        # 1152x864 @ 60.00 Hz (GTF) hsync: 53.70 kHz; pclk: 81.62 MHz
        ModeLine "1152x864"  81.62  1152 1216 1336 1520  864 865 868 895  -HSync +Vsync
        # 1152x864 @ 85.00 Hz (GTF) hsync: 77.10 kHz; pclk: 119.65 MHz
        ModeLine "1152x864"  119.65  1152 1224 1352 1552  864 865 868 907  -HSync +Vsync
        # 1152x864 @ 100.00 Hz (GTF) hsync: 91.50 kHz; pclk: 143.47 MHz
        ModeLine "1152x864"  143.47  1152 1232 1360 1568  864 865 868 915  -HSync +Vsync
        # 1280x960 @ 72.00 Hz (GTF) hsync: 72.07 kHz; pclk: 124.54 MHz
        ModeLine "1280x960"  124.54  1280 1368 1504 1728  960 961 964 1001  -HSync +Vsync
        # 1280x960 @ 75.00 Hz (GTF) hsync: 75.15 kHz; pclk: 129.86 MHz
        ModeLine "1280x960"  129.86  1280 1368 1504 1728  960 961 964 1002  -HSync +Vsync
        # 1280x960 @ 100.00 Hz (GTF) hsync: 101.70 kHz; pclk: 178.99 MHz
        ModeLine "1280x960"  178.99  1280 1376 1520 1760  960 961 964 1017  -HSync +Vsync
        # 1280x1024 @ 100.00 Hz (GTF) hsync: 108.50 kHz; pclk: 190.96 MHz
        ModeLine "1280x1024"  190.96  1280 1376 1520 1760  1024 1025 1028 1085  -HSync +Vsync
        # 1400x1050 @ 60.00 Hz (GTF) hsync: 65.22 kHz; pclk: 122.61 MHz
        ModeLine "1400x1050"  122.61  1400 1488 1640 1880  1050 1051 1054 1087  -HSync +Vsync
        # 1400x1050 @ 72.00 Hz (GTF) hsync: 78.77 kHz; pclk: 149.34 MHz
        ModeLine "1400x1050"  149.34  1400 1496 1648 1896  1050 1051 1054 1094  -HSync +Vsync
        # 1400x1050 @ 75.00 Hz (GTF) hsync: 82.20 kHz; pclk: 155.85 MHz
        ModeLine "1400x1050"  155.85  1400 1496 1648 1896  1050 1051 1054 1096  -HSync +Vsync
        # 1400x1050 @ 85.00 Hz (GTF) hsync: 93.76 kHz; pclk: 179.26 MHz
        ModeLine "1400x1050"  179.26  1400 1504 1656 1912  1050 1051 1054 1103  -HSync +Vsync
        # 1400x1050 @ 100.00 Hz (GTF) hsync: 111.20 kHz; pclk: 214.39 MHz
        ModeLine "1400x1050"  214.39  1400 1512 1664 1928  1050 1051 1054 1112  -HSync +Vsync
        # 1600x1200 @ 100.00 Hz (GTF) hsync: 127.10 kHz; pclk: 280.64 MHz
        ModeLine "1600x1200"  280.64  1600 1728 1904 2208  1200 1201 1204 1271  -HSync +Vsync
        # 1920x1200 @ 60.00 Hz (GTF)  hsync: 74.52; pclk: 193.16 MHz
        Modeline "1920x1200" 193.16  1920 2048 2256 2592  1200 1201 1204 1242  -HSync +HSync
EndSection

Section "Device"
        ### Available Driver options are:-
# sw_cursor is needed for some ati and radeon cards
Option "sw_cursor"
        #Option     "hw_cursor"
        #Option     "NoAccel"
        #Option     "ShowCache"
        #Option     "UseFBDev"
        #Option     "Rotate"
        Option      "UseEvents" "True"
        Identifier  "Card0"
# The following line is auto-generated by KNOPPIX mkxf86config
        Driver      "radeon"
        VendorName  "All"
        BoardName   "All"
#       BusID       "PCI:1:0:0"
EndSection

Section "Screen"
        Identifier "Screen0"
        Device     "Card0"
        Monitor    "Monitor0"
        DefaultColorDepth 16
        SubSection "Display"
                Depth     1
                Modes "1024x768" "800x600" "640x480"
        EndSubSection
        SubSection "Display"
                Depth     4
                Modes "1024x768" "800x600" "640x480"
        EndSubSection
        SubSection "Display"
                Depth     8
                Modes "1024x768" "800x600" "640x480"
        EndSubSection
        SubSection "Display"
                Depth     15
                Modes "1024x768" "800x600" "640x480"
        EndSubSection
        SubSection "Display"
                Depth     16
                Modes "1024x768" "800x600" "640x480"
        EndSubSection
        SubSection "Display"
                Depth     24
                Modes "1024x768" "800x600" "640x480"
        EndSubSection
        SubSection "Display"
                Depth     32
                Modes "1024x768" "800x600" "640x480"
        EndSubsection
EndSection


Section "DRI"
        Mode 0666
EndSection


Now the master question:
Where am I going wrong here? I know at least, where to put the settings, for my Panasonic, but the rest? Is the Softlink for the Monitor-Output wrong?

I would appreciate any help. Thx in advance.
Page 1 of 1 All times are UTC - 6 hours
Powered by phpBB® Forum Software © phpBB Group
http://www.phpbb.com/