| LinHES Forums http://forums.linhes.org/ |
|
| Problems with Channels that pull EPG guide from EIT http://forums.linhes.org/viewtopic.php?f=15&t=16953 |
Page 1 of 1 |
| Author: | Davidonabus [ Sat Oct 13, 2007 10:50 am ] |
| Post subject: | Problems with Channels that pull EPG guide from EIT |
Hey everyone. I am having problems recording material from the channels that I've specified I want to use an onairguide. I haven't really experienced these same problems on the channels that I use SchedulesDirect for. What happens is that I select to record a show that's, say, 2 hours long. And inevitably that show will only record about 1 hour and 10 minutes (the actual length seems to be random).. It just cuts off. But the log doesn't show an error for the end time of the recording. In fact, I see that it shows in the log that the ending of the recording happens at the correct time. But I do see a LOT of the following in the logs and I'm wondering if this is causing my problems. I believe these have to do with the EIT. Quote: 2007-10-13 09:45:45.522 Scheduled 134 items in 0.2 = 0.02 match + 0.14 place
0: start_time: 4933.753 duration: 17.189 1: start_time: 4933.711 duration: -9223372036854.775 stream: start_time: 54819.015 duration: 191.456 bitrate=13940 kb/s 2007-10-13 09:45:45.708 AFD: Opened codec 0xac1b3b50, id(MPEG2VIDEO) type(Video) 2007-10-13 09:45:45.711 AFD: Opened codec 0xac1c4ff0, id(AC3) type(Audio) [mpeg2video @ 0xb7287bc8]invalid mb type in P Frame at 5 33 [mpeg2video @ 0xb7287bc8]mb incr damaged [mpeg2video @ 0xb7287bc8]invalid mb type in P Frame at 5 35 [mpeg2video @ 0xb7287bc8]invalid mb type in P Frame at 4 36 [mpeg2video @ 0xb7287bc8]invalid mb type in P Frame at 1 37 [mpeg2video @ 0xb7287bc8]invalid cbp at 2 38 [mpeg2video @ 0xb7287bc8]ac-tex damaged at 23 39 [mpeg2video @ 0xb7287bc8]invalid mb type in P Frame at 41 40 [mpeg2video @ 0xb7287bc8]ac-tex damaged at 10 41 [mpeg2video @ 0xb7287bc8]ac-tex damaged at 19 42 [mpeg2video @ 0xb7287bc8]ac-tex damaged at 18 43 [mpeg2video @ 0xb7287bc8]invalid cbp at 33 44 2007-10-13 09:45:47.266 EITScanner: Now looking for EIT data on multiplex of channel 157 2007-10-13 09:45:47.812 DTVSM(3) Error: Wrong PMT; pmt->pn(465) desired(157) 2007-10-13 09:45:47.825 DTVSM(3) Error: Wrong PMT; pmt->pn(466) desired(157) 2007-10-13 09:45:47.856 DTVSM(3) Error: Wrong PMT; pmt->pn(470) desired(157) 2007-10-13 09:45:47.900 DTVSM(3) Error: Wrong PMT; pmt->pn(832) desired(157) 2007-10-13 09:45:47.944 DTVSM(3) Error: Wrong PMT; pmt->pn(833) desired(157) 2007-10-13 09:45:47.950 DTVSM(3) Error: Wrong PMT; pmt->pn(848) desired(157) 2007-10-13 09:45:47.994 DTVSM(3) Error: Wrong PMT; pmt->pn(870) desired(157) 2007-10-13 09:45:48.019 DTVSM(3) Error: Wrong PMT; pmt->pn(871) desired(157) 2007-10-13 09:45:48.044 DTVSM(3) Error: Wrong PMT; pmt->pn(875) desired(157) Please, if you can provide some insight, I'd be very grateful. David |
|
| Author: | marc.aronson [ Sat Oct 13, 2007 5:08 pm ] |
| Post subject: | |
I don't have a solution, but I also had a problem with one of my digital tuners and EIT. I wasn't trying to use EIT per say, but I had to manually edit one of the DB tables to remove the option for collecting EIT data in order to tune channel 12 reliably... Marc |
|
| Page 1 of 1 | All times are UTC - 6 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|