View unanswered posts    View active topics

All times are UTC - 6 hours





Post new topic Reply to topic  [ 19 posts ] 
Go to page 1, 2  Next

Print view Previous topic   Next topic  
Author Message
Search for:
PostPosted: Tue Oct 28, 2008 8:44 am 
Offline
Joined: Sun Dec 04, 2005 1:44 pm
Posts: 403
Location: Central NJ
My HD tuners are suddenly having sporadic recording issues. They will record a show successfully, and then fail on the next show. It's either 100% successful for a show, or just a dead recorded...there are no instances of a recording starting out well and breaking in the middle.

I'm thinking it may be a signal issue (even though I have a cable amplifier right in from of my two HD5000's) where if the tuner doesn't get enough juice at the start of the recording, it just craps out. Is there a way to fix this issue? I'd be OK with the first few seconds of the recording garbled, I just don't want the tuners to give up so easily when a recording starts.

_________________
Currently running: R5.5, HD5000 x 2, PVR150, Athlon 64 3000+, Chaintech VNF4, 1GB RAM, 2 x 250GB in LVM, MSI NX6200TC -> AA 9A60 -> HDTV


Top
 Profile  
 
 Post subject:
PostPosted: Tue Oct 28, 2008 5:21 pm 
Offline
Joined: Sun Dec 04, 2005 1:44 pm
Posts: 403
Location: Central NJ
Is there anything in the backend log that I should be looking for?

_________________
Currently running: R5.5, HD5000 x 2, PVR150, Athlon 64 3000+, Chaintech VNF4, 1GB RAM, 2 x 250GB in LVM, MSI NX6200TC -> AA 9A60 -> HDTV


Top
 Profile  
 
 Post subject:
PostPosted: Tue Oct 28, 2008 5:26 pm 
Offline
Joined: Sun Sep 04, 2005 7:48 pm
Posts: 264
Location: Perth, Australia
Not that i can probably help that much, but how does watching livetv go? Do you get the same behaviour?

It might help someone in the know to answer the question if you posted the section of /var/log/mythtv/mythbackend.log surrounding the time the recording stated and failed?

Cheers,

Nathan

_________________
LinHES: R6 | MB: Asus M3N-H/HDMI | CPU: AMD ??Mhz
Capture: 2xHDHR DVB-T
Graphics: Onboard 8300|PSU: Corsair vx450w
Cooling: Zalman cu?,
Display: Benq xx projector


Top
 Profile  
 
 Post subject:
PostPosted: Tue Oct 28, 2008 6:17 pm 
Offline
Joined: Sun Dec 04, 2005 1:44 pm
Posts: 403
Location: Central NJ
Here is an excerpt from my mythbackend.log

CBS 2 News came out as another dead recording.

Code:
2008-10-28 18:04:50.464 AutoExpire: CalcParams(): Max required Free Space: 1.0 GB w/freq: 15 min
2008-10-28 18:08:06.646 UPnpMedia: BuildMediaMap VIDEO scan starting in :/files/video:
2008-10-28 18:08:11.235 UPnpMedia: BuildMediaMap Done. Found 4826 objects
2008-10-28 18:17:01.281 MainServer::HandleAnnounce Monitor
2008-10-28 18:17:01.284 adding: mythtv as a client (events: 0)
2008-10-28 18:17:17.620 Reschedule requested for id 199.
2008-10-28 18:17:18.601 Scheduled 215 items in 1.0 = 0.01 match + 0.97 place
2008-10-28 18:17:18.620 TVRec(1): ASK_RECORDING 1 0 0 0
2008-10-28 18:17:18.940 TVRec(1): Changing from None to RecordingOnly
2008-10-28 18:17:18.944 TVRec(1): HW Tuner: 1->1
2008-10-28 18:17:18.980 AutoExpire: CalcParams(): Max required Free Space: 3.0 GB w/freq: 15 min
2008-10-28 18:17:18.984 Started recording: CBS 2 News at 6PM: channel 3021 on cardid 1, sourceid 3
2008-10-28 18:17:24.488 Reschedule requested for id 200.
2008-10-28 18:17:25.454 Scheduled 216 items in 1.0 = 0.14 match + 0.82 place
2008-10-28 18:17:25.470 TVRec(2): ASK_RECORDING 2 0 0 0
2008-10-28 18:17:25.624 TVRec(2): Changing from None to RecordingOnly
2008-10-28 18:17:25.629 TVRec(2): HW Tuner: 2->2
2008-10-28 18:17:25.653 AutoExpire: CalcParams(): Max required Free Space: 3.0 GB w/freq: 15 min
2008-10-28 18:17:25.658 Started recording: 4 NY News at 6: channel 3041 on cardid 2, sourceid 3
2008-10-28 18:17:26.839 Reschedule requested for id 0.
2008-10-28 18:17:27.438 Scheduled 216 items in 0.6 = 0.00 match + 0.59 place
2008-10-28 18:19:50.524 AutoExpire: CalcParams(): Max required Free Space: 3.0 GB w/freq: 15 min
2008-10-28 18:31:00.385 TVRec(2): Changing from RecordingOnly to None
2008-10-28 18:31:00.540 Finished recording 4 NY News at 6: channel 3041
2008-10-28 18:31:00.633 Reschedule requested for id 0.
2008-10-28 18:31:00.690 TVRec(1): Changing from RecordingOnly to None
2008-10-28 18:31:00.736 Finished recording CBS 2 News at 6PM: channel 3021
2008-10-28 18:31:00.853 Finished recording CBS 2 News at 6PM: channel 3021
2008-10-28 18:31:07.646 Using runtime prefix = /usr
2008-10-28 18:31:07.693 Empty LocalHostName.
2008-10-28 18:31:07.694 Using localhost value of mythtv
2008-10-28 18:31:07.838 New DB connection, total: 1
2008-10-28 18:31:07.897 Connected to database 'mythconverg' at host: localhost
[/code]

_________________
Currently running: R5.5, HD5000 x 2, PVR150, Athlon 64 3000+, Chaintech VNF4, 1GB RAM, 2 x 250GB in LVM, MSI NX6200TC -> AA 9A60 -> HDTV


Top
 Profile  
 
 Post subject:
PostPosted: Thu Oct 30, 2008 5:48 pm 
Offline
Joined: Sun Dec 04, 2005 1:44 pm
Posts: 403
Location: Central NJ
So I did some more testing. It turns out that Tuner 1 always works and Tuner 2 never works.

I've tried:
Swapping the cable signal input wires. (ensuring it isn't a dead cable wire)
Each cable wire one at a time (ensuring it isn't an issue of not enough cable signal to run both cards)
Switch card slots (ensuring it's not a PCI slot issue)
Swapping cards (ensuring that one of the tuner cards isn't dead)

No matter what I do, Tuner 1 works and Tuner 2 does not.

I've checked mythtv-setup to ensure that both cards are configured identically. I've also rebuilt my Knoppmyth box.

The strange this is that I've had both of these tuners working great for the past year or so. I don't know what could suddenly be causing this issue.

_________________
Currently running: R5.5, HD5000 x 2, PVR150, Athlon 64 3000+, Chaintech VNF4, 1GB RAM, 2 x 250GB in LVM, MSI NX6200TC -> AA 9A60 -> HDTV


Top
 Profile  
 
 Post subject:
PostPosted: Thu Oct 30, 2008 5:54 pm 
Offline
Joined: Sun Sep 04, 2005 7:48 pm
Posts: 264
Location: Perth, Australia
If you try the cards independently (ie one in at a time), does it work 100% for each card?

_________________
LinHES: R6 | MB: Asus M3N-H/HDMI | CPU: AMD ??Mhz
Capture: 2xHDHR DVB-T
Graphics: Onboard 8300|PSU: Corsair vx450w
Cooling: Zalman cu?,
Display: Benq xx projector


Top
 Profile  
 
 Post subject:
PostPosted: Fri Oct 31, 2008 2:59 am 
Offline
Joined: Wed Mar 03, 2004 7:43 pm
Posts: 743
Location: Sydney, Australia
If they are identical cards, try swapping the cards in their slots. Sometimes cards just fail. This also eliminates interrupt issues (e.g. if you somehow added extra software that is now sharing one of the card's IRQs).

For testing, try using LiveTV with PiP on. It exercises two cards very well.

_________________
| Nigel Pearson, nigel@ind.tansu.com.au
| Telstra BID, Sydney, Australia
|
|"Things you own end up owning you" - Tyler, Fight Club


Top
 Profile  
 
 Post subject:
PostPosted: Fri Oct 31, 2008 3:37 pm 
Offline
Joined: Sun Dec 04, 2005 1:44 pm
Posts: 403
Location: Central NJ
nigelpearson wrote:
If they are identical cards, try swapping the cards in their slots. Sometimes cards just fail. This also eliminates interrupt issues (e.g. if you somehow added extra software that is now sharing one of the card's IRQs).

For testing, try using LiveTV with PiP on. It exercises two cards very well.


I've swapped the cards into different PCI slots several times. I haven't added any extra software. Yesterday, I did a clean KM install and then imported my DB.

Now it seems that Tuner 1 fails sometimes. Tuner 2 pretty much always fails. Is there any log that will tell me why? (Hardware conflict, signal issue?) I'm just getting such inconsistent test results....so it's very difficult to troubleshoot and find a root cause.

If I check the backend status, it will still report that the tuners are recording, but when I try to view the recording, it can't find the file. MythWeb Recorded Programs lists "B" as the file size.

_________________
Currently running: R5.5, HD5000 x 2, PVR150, Athlon 64 3000+, Chaintech VNF4, 1GB RAM, 2 x 250GB in LVM, MSI NX6200TC -> AA 9A60 -> HDTV


Top
 Profile  
 
 Post subject:
PostPosted: Mon Nov 03, 2008 3:34 am 
Offline
Joined: Wed Mar 03, 2004 7:43 pm
Posts: 743
Location: Sydney, Australia
ed3120 wrote:
I haven't added any extra software.


It can sometimes be really subtle, like adding a SATA drive in a previously IDE-only machine, or running a motherboard temperature monitoring script.

Quote:
Is there any log that will tell me why?


Running the backend with -v playback,file might give you more info in /var/log/mythtv/mythbackend.log. To enable these, edit /etc/init.d/mythtv-backend as root, add them into the EXTRA_ARGS line, and then restart the backend.

Interrupt conflicts are a little easier to find:

$ cat /proc/interrupts
CPU0
0: 365409 XT-PIC-XT timer
1: 10 XT-PIC-XT i8042
2: 0 XT-PIC-XT cascade
5: 0 XT-PIC-XT uhci_hcd:usb1
6: 3 XT-PIC-XT floppy
7: 1 XT-PIC-XT parport0
8: 0 XT-PIC-XT rtc0
9: 2503 XT-PIC-XT uhci_hcd:usb2, bttv0, bt878
...

On that machine, one of my USB ports shares interrupts with my tuner card, so copying files from the front USB socket causes TV skipping, but using the back one doesn't.

Other hardware conflicts are harder to find. The dmesg command sometimes reveals problems:

$ dmesg
...
sd 0:0:0:0: Attached scsi generic sg0 type 0
bt878(0): irq FBUS risc_pc=2bd911d0
bt878(0): irq FBUS risc_pc=2bd911d0
bt878(0): irq FBUS risc_pc=2bd911d0

(a handshaking error on my tuner card)

_________________
| Nigel Pearson, nigel@ind.tansu.com.au
| Telstra BID, Sydney, Australia
|
|"Things you own end up owning you" - Tyler, Fight Club


Top
 Profile  
 
 Post subject:
PostPosted: Thu Nov 06, 2008 6:03 pm 
Offline
Joined: Sun Dec 04, 2005 1:44 pm
Posts: 403
Location: Central NJ
Thanks a bunch! Does the readout below tell me anything?

Is something conflicting on 16,17, and 20?
Is ERR: 1 bad?

Code:
cat /proc/interrupts
           CPU0
  0:      10304   IO-APIC-edge      timer
  1:       2638   IO-APIC-edge      i8042
  6:          3   IO-APIC-edge      floppy
  7:          1   IO-APIC-edge      parport0
  8:          1   IO-APIC-edge      rtc0
  9:          0   IO-APIC-fasteoi   acpi
 12:        113   IO-APIC-edge      i8042
 14:    2391451   IO-APIC-edge      ide0
 15:    4035824   IO-APIC-edge      ide1
 16:   71066853   IO-APIC-fasteoi   ohci_hcd:usb2, eth0
 17:    1130280   IO-APIC-fasteoi   sata_nv, NVidia CK804
 18:          0   IO-APIC-fasteoi   sata_nv
 19:          4   IO-APIC-fasteoi   ehci_hcd:usb1
 20:   57468666   IO-APIC-fasteoi   Technisat/B2C2 FlexCop II/IIb/III Digital TV PCI Driver, nvidia
 21:    3626190   IO-APIC-fasteoi   Technisat/B2C2 FlexCop II/IIb/III Digital TV PCI Driver
 22:     440651   IO-APIC-fasteoi   ivtv0
NMI:          0
LOC:  314414849
ERR:          1
MIS:          0


and here is my dmseg output:

Code:
Linux version 2.6.23-chw-4 (root@mbe.mysettopbox.tv) (gcc version 4.2.3 20071123 (prerelease) (Debian 4.2.2-4)) #1 SMP PREEMPT Mon May 26 14:44:56 PDT 2008
BIOS-provided physical RAM map:
 BIOS-e820: 0000000000000000 - 000000000009f800 (usable)
 BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved)
 BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
 BIOS-e820: 0000000000100000 - 000000003fff0000 (usable)
 BIOS-e820: 000000003fff0000 - 000000003fff3000 (ACPI NVS)
 BIOS-e820: 000000003fff3000 - 0000000040000000 (ACPI data)
 BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
 BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved)
127MB HIGHMEM available.
896MB LOWMEM available.
found SMP MP-table at 000f3780
Entering add_active_range(0, 0, 262128) 0 entries of 256 used
Zone PFN ranges:
  DMA             0 ->     4096
  Normal       4096 ->   229376
  HighMem    229376 ->   262128
Movable zone start PFN for each node
early_node_map[1] active PFN ranges
    0:        0 ->   262128
On node 0 totalpages: 262128
  DMA zone: 32 pages used for memmap
  DMA zone: 0 pages reserved
  DMA zone: 4064 pages, LIFO batch:0
  Normal zone: 1760 pages used for memmap
  Normal zone: 223520 pages, LIFO batch:31
  HighMem zone: 255 pages used for memmap
  HighMem zone: 32497 pages, LIFO batch:7
  Movable zone: 0 pages used for memmap
DMI 2.2 present.
ACPI: RSDP 000F7900, 0014 (r0 Nvidia)
ACPI: RSDT 3FFF3080, 0034 (r1 Nvidia AWRDACPI 42302E31 AWRD        0)
ACPI: FACP 3FFF3180, 0074 (r1 Nvidia AWRDACPI 42302E31 AWRD        0)
ACPI: DSDT 3FFF32C0, 5CF6 (r1 NVIDIA AWRDACPI     1000 MSFT  100000E)
ACPI: FACS 3FFF0000, 0040
ACPI: SSDT 3FFF91C0, 00B5 (r1 PTLTD  POWERNOW        1  LTP        1)
ACPI: MCFG 3FFF9340, 003C (r1 Nvidia AWRDACPI 42302E31 AWRD        0)
ACPI: APIC 3FFF9080, 007C (r1 Nvidia AWRDACPI 42302E31 AWRD        0)
Nvidia board detected. Ignoring ACPI timer override.
If you got timer trouble try acpi_use_timer_override
ACPI: PM-Timer IO Port: 0x4008
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
Processor #0 15:15 APIC version 16
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] disabled)
ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 2, version 17, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: BIOS IRQ0 pin2 override ignored.
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: INT_SRC_OVR (bus 0 bus_irq 14 global_irq 14 high edge)
ACPI: INT_SRC_OVR (bus 0 bus_irq 15 global_irq 15 high edge)
ACPI: IRQ9 used by override.
ACPI: IRQ14 used by override.
ACPI: IRQ15 used by override.
Enabling APIC mode:  Flat.  Using 1 I/O APICs
Using ACPI (MADT) for SMP configuration information
Allocating PCI resources starting at 50000000 (gap: 40000000:a0000000)
swsusp: Registered nosave memory region: 000000000009f000 - 00000000000a0000
swsusp: Registered nosave memory region: 00000000000a0000 - 00000000000f0000
swsusp: Registered nosave memory region: 00000000000f0000 - 0000000000100000
Built 1 zonelists in Zone order.  Total pages: 260081
Kernel command line: auto BOOT_IMAGE=Linux ro root=301 apm=power-off nomce quiet SELINUX_INIT=NO
mapped APIC to ffffb000 (fee00000)
mapped IOAPIC to ffffa000 (fec00000)
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Initializing CPU#0
PID hash table entries: 4096 (order: 12, 16384 bytes)
Detected 1809.261 MHz processor.
spurious 8259A interrupt: IRQ7.
Console: colour VGA+ 80x25
console [tty0] enabled
Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
Memory: 1032092k/1048512k available (4519k kernel code, 15828k reserved, 1529k data, 308k init, 131008k highmem)
virtual kernel memory layout:
    fixmap  : 0xffe14000 - 0xfffff000   (1964 kB)
    pkmap   : 0xff800000 - 0xffc00000   (4096 kB)
    vmalloc : 0xf8800000 - 0xff7fe000   ( 111 MB)
    lowmem  : 0xc0000000 - 0xf8000000   ( 896 MB)
      .init : 0xc06f1000 - 0xc073e000   ( 308 kB)
      .data : 0xc0569ef4 - 0xc06e837c   (1529 kB)
      .text : 0xc0100000 - 0xc0569ef4   (4519 kB)
Checking if this processor honours the WP bit even in supervisor mode... Ok.
Calibrating delay using timer specific routine.. 3619.66 BogoMIPS (lpj=1809834)
Security Framework v1.0.0 initialized
Capability LSM initialized
Mount-cache hash table entries: 512
CPU: After generic identify, caps: 078bfbff e3d3fbff 00000000 00000000 00000001 00000000 00000001 00000000
CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
CPU: L2 Cache: 512K (64 bytes/line)
CPU: After all inits, caps: 078bfbff e3d3fbff 00000000 00000410 00000001 00000000 00000001 00000000
Compat vDSO mapped to ffffe000.
Checking 'hlt' instruction... OK.
SMP alternatives: switching to UP code
Freeing SMP alternatives: 19k freed
ACPI: Core revision 20070126
CPU0: AMD Athlon(tm) 64 Processor 3000+ stepping 02
Total of 1 processors activated (3619.66 BogoMIPS).
ENABLING IO-APIC IRQs
..TIMER: vector=0x31 apic1=0 pin1=0 apic2=-1 pin2=-1
Brought up 1 CPUs
xor: automatically using best checksumming function: pIII_sse
   pIII_sse  :  5500.000 MB/sec
xor: using function: pIII_sse (5500.000 MB/sec)
NET: Registered protocol family 16
ACPI: bus type pci registered
PCI: Using MMCONFIG
PCI: No mmconfig possible on device 00:18
Setting up standard PCI resources
ACPI: EC: Look up EC in DSDT
ACPI: Interpreter enabled
ACPI: (supports S0 S1 S4 S5)
ACPI: Using IOAPIC for interrupt routing
ACPI: PCI Root Bridge [PCI0] (0000:00)
PCI: Transparent bridge - 0000:00:09.0
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB0._PRT]
ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNK2] (IRQs 3 4 5 7 9 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNK3] (IRQs 3 4 *5 7 9 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNK4] (IRQs *3 4 5 7 9 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNK5] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LUBA] (IRQs 3 4 5 7 9 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LUBB] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LMAC] (IRQs 3 4 *5 7 9 10 11 12 14 15)
ACPI: PCI Interrupt Link [LACI] (IRQs 3 4 5 7 9 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LMCI] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LSMB] (IRQs 3 4 5 7 9 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LUB2] (IRQs *3 4 5 7 9 10 11 12 14 15)
ACPI: PCI Interrupt Link [LIDE] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LSID] (IRQs 3 4 5 7 9 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LFID] (IRQs 3 4 5 7 9 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LPCA] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [APC1] (IRQs 16) *0, disabled.
ACPI: PCI Interrupt Link [APC2] (IRQs 17) *0
ACPI: PCI Interrupt Link [APC3] (IRQs 18) *0
ACPI: PCI Interrupt Link [APC4] (IRQs 19) *0
ACPI: PCI Interrupt Link [APC5] (IRQs *16), disabled.
ACPI: PCI Interrupt Link [APCF] (IRQs 20 21 22 23) *0
ACPI: PCI Interrupt Link [APCG] (IRQs 20 21 22 23) *0, disabled.
ACPI: PCI Interrupt Link [APCH] (IRQs 20 21 22 23) *0
ACPI: PCI Interrupt Link [APCJ] (IRQs 20 21 22 23) *0
ACPI: PCI Interrupt Link [APCK] (IRQs 20 21 22 23) *0, disabled.
ACPI: PCI Interrupt Link [APCS] (IRQs 20 21 22 23) *0
ACPI: PCI Interrupt Link [APCL] (IRQs 20 21 22 23) *0
ACPI: PCI Interrupt Link [APCZ] (IRQs 20 21 22 23) *0, disabled.
ACPI: PCI Interrupt Link [APSI] (IRQs 20 21 22 23) *0
ACPI: PCI Interrupt Link [APSJ] (IRQs 20 21 22 23) *0
ACPI: PCI Interrupt Link [APCP] (IRQs 20 21 22 23) *0, disabled.
Linux Plug and Play Support v0.97 (c) Adam Belay
pnp: PnP ACPI init
ACPI: bus type pnp registered
pnp: PnP ACPI: found 14 devices
ACPI: ACPI bus type pnp unregistered
PnPBIOS: Disabled by ACPI PNP
SCSI subsystem initialized
libata version 2.21 loaded.
PCI: Using ACPI for IRQ routing
PCI: If a device doesn't work, try "pci=routeirq".  If it helps, post a report
PCI: Cannot allocate resource region 3 of device 0000:05:00.0
ACPI: RTC can wake from S4
Time: tsc clocksource has been installed.
pnp: 00:01: ioport range 0x4000-0x407f has been reserved
pnp: 00:01: ioport range 0x4080-0x40ff has been reserved
pnp: 00:01: ioport range 0x4400-0x447f has been reserved
pnp: 00:01: ioport range 0x4480-0x44ff has been reserved
pnp: 00:01: ioport range 0x4800-0x487f has been reserved
pnp: 00:01: ioport range 0x4880-0x48ff has been reserved
pnp: 00:0c: iomem range 0xe0000000-0xefffffff could not be reserved
pnp: 00:0d: iomem range 0xd5800-0xd7fff has been reserved
pnp: 00:0d: iomem range 0xf0000-0xf7fff could not be reserved
pnp: 00:0d: iomem range 0xf8000-0xfbfff could not be reserved
pnp: 00:0d: iomem range 0xfc000-0xfffff could not be reserved
PCI: Bridge: 0000:00:09.0
  IO window: d000-dfff
  MEM window: fea00000-feafffff
  PREFETCH window: f8000000-fbffffff
PCI: Bridge: 0000:00:0b.0
  IO window: c000-cfff
  MEM window: fe900000-fe9fffff
  PREFETCH window: fe800000-fe8fffff
PCI: Bridge: 0000:00:0c.0
  IO window: b000-bfff
  MEM window: fe700000-fe7fffff
  PREFETCH window: fe600000-fe6fffff
PCI: Bridge: 0000:00:0d.0
  IO window: a000-afff
  MEM window: fe500000-fe5fffff
  PREFETCH window: fe400000-fe4fffff
PCI: Bridge: 0000:00:0e.0
  IO window: 9000-9fff
  MEM window: fc000000-fdffffff
  PREFETCH window: b0000000-cfffffff
PCI: Setting latency timer of device 0000:00:09.0 to 64
PCI: Setting latency timer of device 0000:00:0b.0 to 64
PCI: Setting latency timer of device 0000:00:0c.0 to 64
PCI: Setting latency timer of device 0000:00:0d.0 to 64
PCI: Setting latency timer of device 0000:00:0e.0 to 64
NET: Registered protocol family 2
IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
TCP established hash table entries: 131072 (order: 9, 2097152 bytes)
TCP bind hash table entries: 65536 (order: 7, 786432 bytes)
TCP: Hash tables configured (established 131072 bind 65536)
TCP reno registered
checking if image is initramfs...it isn't (no cpio magic); looks like an initrd
Freeing initrd memory: 47k freed
audit: initializing netlink socket (disabled)
audit(1225491758.241:1): initialized
highmem bounce pool size: 64 pages
Total HugeTLB memory allocated, 0
VFS: Disk quotas dquot_6.5.1
Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
JFS: nTxBlock = 8065, nTxLock = 64522
SGI XFS with ACLs, security attributes, realtime, large block numbers, no debug enabled
SGI XFS Quota Management subsystem
async_tx: api initialized (async)
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered (default)
io scheduler cfq registered
PCI: Linking AER extended capability on 0000:00:0b.0
PCI: Linking AER extended capability on 0000:00:0c.0
PCI: Linking AER extended capability on 0000:00:0d.0
PCI: Linking AER extended capability on 0000:00:0e.0
Boot video device is 0000:05:00.0
PCI: Setting latency timer of device 0000:00:0b.0 to 64
assign_interrupt_mode Found MSI capability
Allocate Port Service[0000:00:0b.0:pcie00]
Allocate Port Service[0000:00:0b.0:pcie03]
PCI: Setting latency timer of device 0000:00:0c.0 to 64
assign_interrupt_mode Found MSI capability
Allocate Port Service[0000:00:0c.0:pcie00]
Allocate Port Service[0000:00:0c.0:pcie03]
PCI: Setting latency timer of device 0000:00:0d.0 to 64
assign_interrupt_mode Found MSI capability
Allocate Port Service[0000:00:0d.0:pcie00]
Allocate Port Service[0000:00:0d.0:pcie03]
PCI: Setting latency timer of device 0000:00:0e.0 to 64
assign_interrupt_mode Found MSI capability
Allocate Port Service[0000:00:0e.0:pcie00]
Allocate Port Service[0000:00:0e.0:pcie03]
isapnp: Scanning for PnP cards...
isapnp: No Plug & Play device found
FDC 0 is a post-1991 82077
RAMDISK driver initialized: 16 RAM disks of 4096K size 1024 blocksize
loop: module loaded
pcnet32.c:v1.33 27.Jun.2006 tsbogend@alpha.franken.de
e100: Intel(R) PRO/100 Network Driver, 3.5.23-k4-NAPI
e100: Copyright(c) 1999-2006 Intel Corporation
ns83820.c: National Semiconductor DP83820 10/100/1000 driver.
sk98lin: driver has been replaced by the skge driver and is scheduled for removal
via-rhine: Broken BIOS detected, avoid_D3 enabled.
forcedeth.c: Reverse Engineered nForce ethernet driver. Version 0.60.
ACPI: PCI Interrupt Link [APCH] enabled at IRQ 23
ACPI: PCI Interrupt 0000:00:0a.0[A] -> Link [APCH] -> GSI 23 (level, low) -> IRQ 16
PCI: Setting latency timer of device 0000:00:0a.0 to 64
forcedeth: using HIGHDMA
eth0: forcedeth.c: subsystem: 01565:2501 bound to 0000:00:0a.0
dmfe: Davicom DM9xxx net driver, version 1.36.4 (2002-01-17)
winbond-840.c:v1.01-e (2.4 port) Sep-11-2006  Donald Becker <becker@scyld.com>
  http://www.scyld.com/network/drivers.html
uli526x: ULi M5261/M5263 net driver, version 0.9.3 (2005-7-29)
input: Macintosh mouse button emulation as /class/input/input0
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
NFORCE-CK804: IDE controller at PCI slot 0000:00:06.0
NFORCE-CK804: chipset revision 242
NFORCE-CK804: not 100% native mode: will probe irqs later
NFORCE-CK804: BIOS didn't set cable bits correctly. Enabling workaround.
NFORCE-CK804: 0000:00:06.0 (rev f2) UDMA133 controller
    ide0: BM-DMA at 0xfb00-0xfb07, BIOS settings: hda:DMA, hdb:DMA
    ide1: BM-DMA at 0xfb08-0xfb0f, BIOS settings: hdc:DMA, hdd:DMA
Probing IDE interface ide0...
hda: Maxtor 6Y080P0, ATA DISK drive
hdb: PLEXTOR DVDR PX-708A, ATAPI CD/DVD-ROM drive
hda: selected mode 0x46
hdb: selected mode 0x42
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
Probing IDE interface ide1...
hdc: ST3250823A, ATA DISK drive
hdd: ST3250823A, ATA DISK drive
hdc: selected mode 0x45
hdd: selected mode 0x45
ide1 at 0x170-0x177,0x376 on irq 15
hda: max request size: 128KiB
hda: 160086528 sectors (81964 MB) w/7936KiB Cache, CHS=65535/16/63, UDMA(133)
hda: cache flushes supported
 hda: hda1 hda2 hda3
hdc: max request size: 512KiB
hdc: 488397168 sectors (250059 MB) w/8192KiB Cache, CHS=30401/255/63, UDMA(100)
hdc: cache flushes supported
 hdc: hdc1 hdc2 hdc3 hdc4
hdd: max request size: 512KiB
hdd: 488397168 sectors (250059 MB) w/8192KiB Cache, CHS=30401/255/63, UDMA(100)
hdd: cache flushes supported
 hdd: hdd1
hdb: ATAPI 40X DVD-ROM DVD-R CD-R/RW drive, 2048kB Cache, UDMA(33)
Uniform CD-ROM driver Revision: 3.20
Loading iSCSI transport class v2.0-724.
sata_nv 0000:00:07.0: version 3.5
ACPI: PCI Interrupt Link [APSI] enabled at IRQ 22
ACPI: PCI Interrupt 0000:00:07.0[A] -> Link [APSI] -> GSI 22 (level, low) -> IRQ 17
sata_nv 0000:00:07.0: Using ADMA mode
PCI: Setting latency timer of device 0000:00:07.0 to 64
scsi0 : sata_nv
scsi1 : sata_nv
ata1: SATA max UDMA/133 cmd 0xf8cd8480 ctl 0xf8cd84a0 bmdma 0x0001f600 irq 17
ata2: SATA max UDMA/133 cmd 0xf8cd8580 ctl 0xf8cd85a0 bmdma 0x0001f608 irq 17
ata1: SATA link down (SStatus 0 SControl 300)
ata2: SATA link down (SStatus 0 SControl 300)
ACPI: PCI Interrupt Link [APSJ] enabled at IRQ 21
ACPI: PCI Interrupt 0000:00:08.0[A] -> Link [APSJ] -> GSI 21 (level, low) -> IRQ 18
sata_nv 0000:00:08.0: Using ADMA mode
PCI: Setting latency timer of device 0000:00:08.0 to 64
scsi2 : sata_nv
scsi3 : sata_nv
ata3: SATA max UDMA/133 cmd 0xf8cda480 ctl 0xf8cda4a0 bmdma 0x0001f100 irq 18
ata4: SATA max UDMA/133 cmd 0xf8cda580 ctl 0xf8cda5a0 bmdma 0x0001f108 irq 18
ata3: SATA link down (SStatus 0 SControl 300)
ata4: SATA link down (SStatus 0 SControl 300)
PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mice: PS/2 mouse device common for all mice
input: AT Translated Set 2 keyboard as /class/input/input1
md: linear personality registered for level -1
md: raid0 personality registered for level 0
md: raid1 personality registered for level 1
raid6: int32x1    675 MB/s
raid6: int32x2    718 MB/s
raid6: int32x4    683 MB/s
raid6: int32x8    500 MB/s
raid6: mmxx1     1453 MB/s
raid6: mmxx2     2656 MB/s
raid6: sse1x1    1316 MB/s
raid6: sse1x2    2105 MB/s
raid6: sse2x1    2230 MB/s
raid6: sse2x2    3023 MB/s
raid6: using algorithm sse2x2 (3023 MB/s)
md: raid6 personality registered for level 6
md: raid5 personality registered for level 5
md: raid4 personality registered for level 4
device-mapper: ioctl: 4.11.0-ioctl (2006-10-12) initialised: dm-devel@redhat.com
NET: Registered protocol family 1
NET: Registered protocol family 15
Using IPI No-Shortcut mode
input: PS/2 Generic Mouse as /class/input/input2
md: Autodetecting RAID arrays.
md: autorun ...
md: ... autorun DONE.
RAMDISK: Compressed image found at block 0
VFS: Mounted root (ext2 filesystem).
(fs/jbd/recovery.c, 255): journal_recover: JBD: recovery, exit status 0, recovered transactions 28217 to 32405
(fs/jbd/recovery.c, 257): journal_recover: JBD: Replayed 8615 and revoked 10/138 blocks
kjournald starting.  Commit interval 5 seconds
EXT3 FS on hda1, internal journal
EXT3-fs: recovery complete.
EXT3-fs: mounted filesystem with ordered data mode.
Freeing unused kernel memory: 308k freed
Switched to high resolution mode on CPU 0
rtc_cmos 00:04: rtc core: registered rtc_cmos as rtc0
rtc0: alarms up to one year, y3k
input: PC Speaker as /class/input/input3
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
ACPI: PCI Interrupt Link [APCL] enabled at IRQ 20
ACPI: PCI Interrupt 0000:00:02.1[B] -> Link [APCL] -> GSI 20 (level, low) -> IRQ 19
PCI: Setting latency timer of device 0000:00:02.1 to 64
ehci_hcd 0000:00:02.1: EHCI Host Controller
ehci_hcd 0000:00:02.1: new USB bus registered, assigned bus number 1
ehci_hcd 0000:00:02.1: debug port 1
PCI: cache line size of 64 is not supported by device 0000:00:02.1
ehci_hcd 0000:00:02.1: irq 19, io mem 0xfeb00000
ehci_hcd 0000:00:02.1: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 10 ports detected
ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver
i2c-adapter i2c-0: nForce2 SMBus adapter at 0x4c00
i2c-adapter i2c-1: nForce2 SMBus adapter at 0x4c40
ACPI: PCI Interrupt Link [APCF] enabled at IRQ 23
ACPI: PCI Interrupt 0000:00:02.0[A] -> Link [APCF] -> GSI 23 (level, low) -> IRQ 16
PCI: Setting latency timer of device 0000:00:02.0 to 64
ohci_hcd 0000:00:02.0: OHCI Host Controller
ohci_hcd 0000:00:02.0: new USB bus registered, assigned bus number 2
ohci_hcd 0000:00:02.0: irq 16, io mem 0xfebff000
usb usb2: configuration #1 chosen from 1 choice
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 10 ports detected
ACPI Exception (processor_core-0819): AE_NOT_FOUND, Processor Device is not present [20070126]
input: Power Button (FF) as /class/input/input4
ACPI: Power Button (FF) [PWRF]
input: Power Button (CM) as /class/input/input5
ACPI: Power Button (CM) [PWRB]
input: Sleep Button (CM) as /class/input/input6
ACPI: Sleep Button (CM) [SLPB]
ACPI: Thermal Zone [THRM] (29 C)
b2c2-flexcop: B2C2 FlexcopII/II(b)/III digital TV receiver chip loaded successfully
flexcop-pci: will use the HW PID filter.
flexcop-pci: card revision 2
ACPI: PCI Interrupt Link [APC3] enabled at IRQ 18
ACPI: PCI Interrupt 0000:01:06.0[A] -> Link [APC3] -> GSI 18 (level, low) -> IRQ 20
DVB: registering new adapter (FlexCop Digital TV device)
b2c2-flexcop: MAC address = 00:d0:d7:0e:a4:fe
b2c2-flexcop: i2c master_xfer failed
usb 2-3: new low speed USB device using ohci_hcd and address 2
b2c2-flexcop: i2c master_xfer failed
b2c2-flexcop: i2c master_xfer failed
mt352_read_register: readreg error (reg=127, ret==-121)
ACPI: PCI Interrupt Link [APCJ] enabled at IRQ 22
ACPI: PCI Interrupt 0000:00:04.0[A] -> Link [APCJ] -> GSI 22 (level, low) -> IRQ 17
PCI: Setting latency timer of device 0000:00:04.0 to 64
b2c2-flexcop: i2c master_xfer failed
nxt200x: nxt200x_readbytes: i2c read error (addr 0x0a, err == -121)
Unknown/Unsupported NXT chip: 00 00 00 00 00
b2c2-flexcop: found the lgdt3303 at i2c address: 0x59
DVB: registering frontend 0 (LG Electronics LGDT3303 VSB/QAM Frontend)...
b2c2-flexcop: initialization of 'Air2PC/AirStar 2 ATSC 3rd generation (HD5000)' at the 'PCI' bus controlled by a 'FlexCopIIb' complete
flexcop-pci: will use the HW PID filter.
flexcop-pci: card revision 2
ACPI: PCI Interrupt Link [APC4] enabled at IRQ 19
ACPI: PCI Interrupt 0000:01:07.0[A] -> Link [APC4] -> GSI 19 (level, low) -> IRQ 21
DVB: registering new adapter (FlexCop Digital TV device)
b2c2-flexcop: MAC address = 00:d0:d7:0e:a7:f4
b2c2-flexcop: i2c master_xfer failed
usb 2-3: configuration #1 chosen from 1 choice
b2c2-flexcop: i2c master_xfer failed
b2c2-flexcop: i2c master_xfer failed
mt352_read_register: readreg error (reg=127, ret==-121)
b2c2-flexcop: i2c master_xfer failed
nxt200x: nxt200x_readbytes: i2c read error (addr 0x0a, err == -121)
Unknown/Unsupported NXT chip: 00 00 00 00 00
b2c2-flexcop: found the lgdt3303 at i2c address: 0x59
DVB: registering frontend 1 (LG Electronics LGDT3303 VSB/QAM Frontend)...
b2c2-flexcop: initialization of 'Air2PC/AirStar 2 ATSC 3rd generation (HD5000)' at the 'PCI' bus controlled by a 'FlexCopIIb' complete
Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing disabled
serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
usb 2-4: new low speed USB device using ohci_hcd and address 3
00:08: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
intel8x0_measure_ac97_clock: measured 63623 usecs
intel8x0: clocking to 47104
Linux video capture interface: v2.00
parport_pc 00:09: reported by Plug and Play ACPI
parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE]
ACPI: Fan [FAN] (on)
usb 2-4: configuration #1 chosen from 1 choice
usb 2-5: new low speed USB device using ohci_hcd and address 4
i2c-adapter i2c-2: SMBus Quick command not supported, can't probe for chips
i2c-adapter i2c-3: SMBus Quick command not supported, can't probe for chips
ivtv:  Start initialization, version 1.2.0
ivtv0: Initializing card #0
ivtv0: Autodetected Hauppauge card (cx23416 based)
ACPI: PCI Interrupt Link [APC2] enabled at IRQ 17
ACPI: PCI Interrupt 0000:01:09.0[A] -> Link [APC2] -> GSI 17 (level, low) -> IRQ 22
ivtv0: Unreasonably low latency timer, setting to 64 (was 32)
tveeprom 4-0050: Hauppauge model 26052, rev C199, serial# 8148934
tveeprom 4-0050: tuner model is TCL 2002N 5H (idx 99, type 50)
tveeprom 4-0050: TV standards NTSC(M) (eeprom 0x08)
tveeprom 4-0050: audio processor is CX25843 (idx 37)
tveeprom 4-0050: decoder processor is CX25843 (idx 30)
tveeprom 4-0050: has no radio, has IR receiver, has IR transmitter
ivtv0: Autodetected Hauppauge WinTV PVR-150
ivtv0: Reopen i2c bus for IR-blaster support
cx25840 4-0044: cx25843-23 found @ 0x88 (ivtv i2c driver #0)
tuner 4-0061: chip found @ 0xc2 (ivtv i2c driver #0)
wm8775 4-001b: chip found @ 0x36 (ivtv i2c driver #0)
tuner-simple 4-0061: type set to 50 (TCL 2002N)
ivtv0: Registered device video0 for encoder MPG (4096 kB)
ivtv0: Registered device video32 for encoder YUV (2048 kB)
ivtv0: Registered device vbi0 for encoder VBI (1024 kB)
ivtv0: Registered device video24 for encoder PCM (320 kB)
ivtv0: Initialized card #0: Hauppauge WinTV PVR-150
ivtv:  End initialization
usb 2-5: configuration #1 chosen from 1 choice
usbcore: registered new interface driver hiddev
input: Logitech USB Receiver as /class/input/input7
input: USB HID v1.10 Keyboard [Logitech USB Receiver] on usb-0000:00:02.0-3
Fixing up Logitech keyboard report descriptor
input: Logitech USB Receiver as /class/input/input8
input,hiddev96: USB HID v1.10 Mouse [Logitech USB Receiver] on usb-0000:00:02.0-3
input: Logitech Logitech Cordless RumblePad 2 as /class/input/input9
Force feedback for Logitech force feedback devices by Johann Deneux <johann.deneux@it.uu.se>
input: USB HID v1.10 Gamepad [Logitech Logitech Cordless RumblePad 2] on usb-0000:00:02.0-4
input: Logitech Logitech Cordless RumblePad 2 as /class/input/input10
Force feedback for Logitech force feedback devices by Johann Deneux <johann.deneux@it.uu.se>
input: USB HID v1.10 Gamepad [Logitech Logitech Cordless RumblePad 2] on usb-0000:00:02.0-5
usbcore: registered new interface driver usbhid
drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver
Adding 1953496k swap on /dev/hda2.  Priority:-1 extents:1 across:1953496k
Adding 594396k swap on /dev/hdc2.  Priority:-2 extents:1 across:594396k
EXT3 FS on hda1, internal journal
Non-volatile memory driver v1.2
USB Universal Host Controller Interface driver v3.0
Initializing USB Mass Storage driver...
usbcore: registered new interface driver usb-storage
USB Mass Storage support registered.
aufs 20080128
No dock devices found.
fuse init (API version 7.8)
Linux agpgart interface v0.102
NET: Registered protocol family 17
NET: Registered protocol family 10
lo: Disabled Privacy Extensions
kjournald starting.  Commit interval 5 seconds
EXT3 FS on hdc4, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
kjournald starting.  Commit interval 5 seconds
EXT3 FS on hdd1, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
hda: selected mode 0x46
hdc: selected mode 0x45
hdd: selected mode 0x45
hdb: selected mode 0x42
lirc_dev: IR Remote Control driver registered, major 61
lirc_pvr150: chip found with RX and TX
lirc_dev: lirc_register_plugin: sample_rate: 0
lirc_pvr150: firmware of size 258140 loaded
lirc_pvr150: 654 codesets loaded
lirc_pvr150: Hauppauge PVR-150 IR blaster: firmware version 1.3.0
eth0: no IPv6 routers present
Clocksource tsc unstable (delta = 9367492678 ns)
Time: acpi_pm clocksource has been installed.
nvidia: module license 'NVIDIA' taints kernel.
ACPI: PCI Interrupt 0000:05:00.0[A] -> Link [APC3] -> GSI 18 (level, low) -> IRQ 20
PCI: Setting latency timer of device 0000:05:00.0 to 64
NVRM: loading NVIDIA UNIX x86 Kernel Module  173.14.09  Wed Jun  4 23:43:17 PDT 2008
ivtv0: Loaded v4l-cx2341x-enc.fw firmware (376836 bytes)
ivtv0: Encoder revision: 0x02060039
cx25840 4-0044: loaded v4l-cx25840.fw firmware (16382 bytes)
ISO 9660 Extensions: Microsoft Joliet Level 3
ISO 9660 Extensions: RRIP_1991A
EXT2-fs warning: mounting unchecked fs, running e2fsck is recommended
kjournald starting.  Commit interval 5 seconds
EXT3-fs warning: maximal mount count reached, running e2fsck is recommended
EXT3 FS on hdc1, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
hdb: selected mode 0x42
hdb: selected mode 0x42
hdb: selected mode 0x42
SMB connection re-established (-5)
SMB connection re-established (-5)
mythfilldatabas[6189]: segfault at a80816c7 eip 081a0490 esp b4644c4c error 4
SMB connection re-established (-5)
SMB connection re-established (-5)
mythfilldatabas[7716]: segfault at 00000000 eip 081a029f esp b46dfc4c error 6
SMB connection re-established (-5)
SMB connection re-established (-5)
SMB connection re-established (-5)
mythfilldatabas[9131] general protection eip:818af88 esp:b46f4c4c error:9f64
SMB connection re-established (-5)
SMB connection re-established (-5)
mythfilldatabas[10532]: segfault at 0000001a eip 081a0440 esp b4664c4c error 6
NVRM: Xid (0005:00): 13, 001e 31415930 00000019 00000104 00000000 00000800
NVRM: Xid (0005:00): 8, Channel 00000000
SMB connection re-established (-5)
SMB connection re-established (-5)
SMB connection re-established (-5)
SMB connection re-established (-5)
SMB connection re-established (-5)

_________________
Currently running: R5.5, HD5000 x 2, PVR150, Athlon 64 3000+, Chaintech VNF4, 1GB RAM, 2 x 250GB in LVM, MSI NX6200TC -> AA 9A60 -> HDTV


Top
 Profile  
 
 Post subject:
PostPosted: Thu Nov 06, 2008 9:47 pm 
Offline
Joined: Sun Aug 28, 2005 7:07 pm
Posts: 821
Location: Melbourne, Australia
So the HD5000 is a technisat card with flexcop?

I have had exactly the same problem with the latest revision of a technisat card (the Airstar2 for those interested). It really looks like an interrupt problem (esp. given your log files). Does anyone know how to juggle IRQ #s? Nigel?

Mike

_________________
*********************
LinHES 7.4
Australian Dragon
*********************


Top
 Profile  
 
 Post subject:
PostPosted: Thu Nov 06, 2008 10:12 pm 
Offline
Joined: Sun Dec 04, 2005 1:44 pm
Posts: 403
Location: Central NJ
manicmike wrote:
So the HD5000 is a technisat card with flexcop?

I have had exactly the same problem with the latest revision of a technisat card (the Airstar2 for those interested). It really looks like an interrupt problem (esp. given your log files). Does anyone know how to juggle IRQ #s? Nigel?

Mike


Yeah the technistats are my 2 HD5000 cards. When you refer to my logs, are you talking about IRQ 16, which looks like it is conflicting? How do I get something to move to a different IRQ?

_________________
Currently running: R5.5, HD5000 x 2, PVR150, Athlon 64 3000+, Chaintech VNF4, 1GB RAM, 2 x 250GB in LVM, MSI NX6200TC -> AA 9A60 -> HDTV


Top
 Profile  
 
 Post subject:
PostPosted: Fri Nov 14, 2008 12:34 am 
Offline
Joined: Tue Jan 18, 2005 2:07 am
Posts: 1530
Location: California
ed3120 wrote:
manicmike wrote:
How do I get something to move to a different IRQ?


Moving cards to a different PCI slot will sometimes change the IRQ it uses. Also, some BIOS's will let you re-assign the IRQ mapping.

Marc


Top
 Profile  
 
 Post subject:
PostPosted: Fri Nov 14, 2008 1:39 am 
Offline
Joined: Sun Aug 28, 2005 7:07 pm
Posts: 821
Location: Melbourne, Australia
There's quite an interesting discussion on conflicting IRQs at http://www.gossamer-threads.com/lists/linux/kernel/862686

I'll be trying a few BIOS mods (apic, reassigning certain in-built stuff) to see if it fixes my problems.

Mike

EDIT: also http://ubuntuforums.org/showthread.php?t=476489

_________________
*********************
LinHES 7.4
Australian Dragon
*********************


Top
 Profile  
 
 Post subject:
PostPosted: Fri Nov 14, 2008 6:23 pm 
Offline
Joined: Wed Mar 03, 2004 7:43 pm
Posts: 743
Location: Sydney, Australia
ed3120 wrote:
Code:
cat /proc/interrupts
...
 16:   71066853   IO-APIC-fasteoi   ohci_hcd:usb2, eth0
 17:    1130280   IO-APIC-fasteoi   sata_nv, NVidia CK804
...
 20:   57468666   IO-APIC-fasteoi   Technisat/B2C2 FlexCop II/IIb/III Digital TV PCI Driver, nvidia
...
ERR:          1


OK. Sharing USB and EtherNet is no real problem, neither is the SATA and its RAID driver. One of your TV cards being shared with a generic "nvidia" chip (maybe the bus interface) could be enough to cause the problem, though.

The ERR line means there was one spurious interrupt since your last boot. Not a huge problem, particularly on such a full machine (three or five hard disks?), but you can Google for it if you are curious (e.g. http://lkml.org/lkml/2005/1/12/356). Checking your internal cabling, and your power supply, might be worthwhile.

If you are not using the serial or parallel ports, you might be able to disable them in the BIOS. That is also the first place to look for the tuner card IRQ assignment, but it isn't always possible to have unshared interrupts in a machine (and I am not 100% sure it is the cause of your recording faults if this setup has worked before).

P.S. The mythfilldatabase segfaults are interesting, but lets fix your tuner faults first

_________________
| Nigel Pearson, nigel@ind.tansu.com.au
| Telstra BID, Sydney, Australia
|
|"Things you own end up owning you" - Tyler, Fight Club


Top
 Profile  
 

Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 19 posts ] 
Go to page 1, 2  Next



All times are UTC - 6 hours




Who is online

Users browsing this forum: No registered users and 3 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Jump to:  
cron
Powered by phpBB® Forum Software © phpBB Group

Theme Created By ceyhansuyu