I had this problem as well with my 150 and the problem went away after I set it to 720X480 and rebooted
but you said you already did that so I am not sure either??
| LinHES Forums http://forums.linhes.org/ |
|
| Right side of screen for tuner not viewable - using PVR 150 http://forums.linhes.org/viewtopic.php?f=17&t=5204 |
Page 1 of 1 |
| Author: | darkunderlord [ Wed Jul 06, 2005 9:36 am ] |
| Post subject: | Right side of screen for tuner not viewable - using PVR 150 |
Hi all.. Great forums, and I've tried searching ALOT on it, so forgive me if this has been posted and fixed already. I am using the newest version of KnoppMyth and have gotten alot of good info from here on how to get my 150's working with ivtv, etc. I use NTSC and have tried MANY different settings for the height and width, such as 720x480, and no matter what I try, it continues to not show about the right 1/4 of the screen. I'm only using a monitor, so no TV out as of yet. It's like the right part of the TV is off the monitor. I've adjusted the X and Y settings etc, in Myth but same problem. I am thinking it's probably just my config of ivtv as this also happens when I do a.. Code: cat /dev/video0 > test.mpg
My config is very similar to all the other posts of modified PVR 150's found here on the forums... Thanks! Dark |
|
| Author: | Xsecrets [ Wed Jul 06, 2005 10:41 am ] |
| Post subject: | |
what resolution are you running X at? I could see this happening if you are capturing at 720x480 and running X at 640x480 or something. though in theory it really should get scaled anyways. |
|
| Author: | darkunderlord [ Wed Jul 06, 2005 10:57 am ] |
| Post subject: | |
Yeah, It's most def at least 800x600, but with the cat /dev/video, that is free from X stuff anyhow. I'm still stumped... |
|
| Author: | stephencu2004 [ Wed Jul 06, 2005 11:35 am ] |
| Post subject: | |
I had this problem as well with my 150 and the problem went away after I set it to 720X480 and rebooted but you said you already did that so I am not sure either??
|
|
| Author: | darkunderlord [ Wed Jul 06, 2005 11:44 am ] |
| Post subject: | |
I'm trying to set it at the command line again. I was trying it with MythTV's config before, and that was probably it. I'll let you know if the "-f width=720,height=480" works for me. How can I make this permanent in the configs? Thanks... |
|
| Page 1 of 1 | All times are UTC - 6 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|