Problem fixed....

After months of pulling hair it turned out to be my power cord rapped around my antenna lead. What a fool I am..


My setup works well except for one channel. It has a badly broken picture and crackly sound even if the signal is showing at 99%. All other channels are almost perfect and I feel this is not related to signal quality. Any suggestions on what to try and debug this problem. I am using knoppmyth 5A30.2 with myth 0.19 compiled from SVN but the problem was there before I upgraded. I hoped the update would fix the issue.

I am in Queensland Australia and the problem channrl is 7 Sunhine Coast.

divco dvb-t lite
knoppmyth 5A30.2
duron 1200
513 ram
No out of the ordinary hardware.

Many thanks..