Hi people,

I`m trying to install R5D1 but I cant detect my pci tv cards. These are the specs:

CPU : Athlon 3800+
Board : Asus A8V-X
Video : FX5200
Audio : On Board
PCI : PVR-150 and a PixelView Prolink mpeg2

The main problem is that the PCI cards are not detected by the system. I`ve tryied also Suse and Ubuntu and both couldn`t detect the cards. I`ve installed Windows and they are good to go, so I`m confident that is a hardware compatibility issue.

This is my lspci and dmesg results:

lspci:
0000:00:00.0 Host bridge: VIA Technologies, Inc. K8T800Pro Host Bridge
0000:00:00.1 Host bridge: VIA Technologies, Inc. K8T800Pro Host Bridge
0000:00:00.2 Host bridge: VIA Technologies, Inc. K8T800Pro Host Bridge
0000:00:00.3 Host bridge: VIA Technologies, Inc. K8T800Pro Host Bridge
0000:00:00.4 Host bridge: VIA Technologies, Inc. K8T800Pro Host Bridge
0000:00:00.7 Host bridge: VIA Technologies, Inc. K8T800Pro Host Bridge
0000:00:01.0 PCI bridge: VIA Technologies, Inc. VT8237 PCI bridge [K8T800/K8T890 South]
0000:00:0f.0 IDE interface: VIA Technologies, Inc. VT8251 AHCI/SATA 4-Port Controller
0000:00:0f.1 IDE interface: VIA Technologies, Inc. VT82C586A/B/VT82C686/A/B/VT823x/A/C PIPC Bus Master IDE (rev 07)
0000:00:10.0 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (rev 90)
0000:00:10.1 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (rev 90)
0000:00:10.2 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (rev 90)
0000:00:10.3 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (rev 90)
0000:00:10.4 USB Controller: VIA Technologies, Inc. USB 2.0 (rev 90)
0000:00:11.0 ISA bridge: VIA Technologies, Inc. VT8251 PCI to ISA Bridge
0000:00:11.7 Host bridge: VIA Technologies, Inc. VT8251 Ultra VLINK Controller
0000:00:12.0 Ethernet controller: VIA Technologies, Inc. VT6102 [Rhine-II] (rev 7c)
0000:00:13.0 PCI bridge: VIA Technologies, Inc. VT8251 Host Bridge
0000:00:13.1 PCI bridge: VIA Technologies, Inc. VT8251 PCI to PCI Bridge
0000:00:18.0 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] HyperTransport Technology Configuration
0000:00:18.1 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Address Map
0000:00:18.2 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] DRAM Controller
0000:00:18.3 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Miscellaneous Control
0000:01:00.0 VGA compatible controller: nVidia Corporation NV34 [GeForce FX 5200] (rev a1)
0000:02:00.0 PCI bridge: VIA Technologies, Inc. VT8251 PCIE Root Port
0000:02:00.1 PCI bridge: VIA Technologies, Inc. VT8251 PCIE Root Port
0000:02:01.0 Audio device: VIA Technologies, Inc. VIA High Definition Audio Controller

dmesg:

Linux version 2.6.17-chw-8 (root@mythtv) (gcc version 3.4.4 20050314 (prerelease) (Debian 3.4.3-13)) #1 SMP PREEMPT Sun Jul 30 12:38:47 PDT 2006
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 000000003ffd0000 (usable)
BIOS-e820: 000000003ffd0000 - 000000003ffde000 (ACPI data)
BIOS-e820: 000000003ffde000 - 0000000040000000 (ACPI NVS)
BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
BIOS-e820: 00000000ff780000 - 0000000100000000 (reserved)
127MB HIGHMEM available.
896MB LOWMEM available.
found SMP MP-table at 000ff780
On node 0 totalpages: 262096
DMA zone: 4096 pages, LIFO batch:0
Normal zone: 225280 pages, LIFO batch:31
HighMem zone: 32720 pages, LIFO batch:7
DMI 2.3 present.
ACPI: RSDP (v000 ACPIAM ) @ 0x000fa970
ACPI: RSDT (v001 A M I OEMRSDT 0x06000620 MSFT 0x00000097) @ 0x3ffd0000
ACPI: FADT (v002 A M I OEMFACP 0x06000620 MSFT 0x00000097) @ 0x3ffd0200
ACPI: MADT (v001 A M I OEMAPIC 0x06000620 MSFT 0x00000097) @ 0x3ffd0390
ACPI: MCFG (v001 A M I OEMMCFG 0x06000620 MSFT 0x00000097) @ 0x3ffd03f0
ACPI: OEMB (v001 A M I AMI_OEM 0x06000620 MSFT 0x00000097) @ 0x3ffde040
ACPI: DSDT (v001 A0304 A0304001 0x00000001 INTL 0x02002026) @ 0x00000000
ACPI: PM-Timer IO Port: 0x808
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
Processor #0 15:15 APIC version 16
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x81] disabled)
ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 1, version 3, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
Enabling APIC mode: Flat. Using 1 I/O APICs
Using ACPI (MADT) for SMP configuration information
Allocating PCI resources starting at 50000000 (gap: 40000000:a0000000)
Built 1 zonelists
Kernel command line: auto BOOT_IMAGE=Linux ro root=301 splash=silent apm=power-off nomce
bootsplash: silent mode.
mapped APIC to ffffd000 (fee00000)
mapped IOAPIC to ffffc000 (fec00000)
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Initializing CPU#0
PID hash table entries: 4096 (order: 12, 16384 bytes)
Detected 2400.122 MHz processor.
Using pmtmr for high-res timesource
Console: colour VGA+ 80x25
Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
Memory: 1032252k/1048384k available (4215k kernel code, 15548k reserved, 1593k data, 252k init, 130880k highmem)
Checking if this processor honours the WP bit even in supervisor mode... Ok.
Calibrating delay using timer specific routine.. 4802.33 BogoMIPS (lpj=2401165)
Security Framework v1.0.0 initialized
Mount-cache hash table entries: 512
CPU: After generic identify, caps: 078bfbff e3d3fbff 00000000 00000000 00000001 00000000 00000001
CPU: After vendor identify, caps: 078bfbff e3d3fbff 00000000 00000000 00000001 00000000 00000001
CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
CPU: L2 Cache: 512K (64 bytes/line)
CPU: After all inits, caps: 078bfbff e3d3fbff 00000000 00000410 00000001 00000000 00000001
Checking 'hlt' instruction... OK.
SMP alternatives: switching to UP code
Freeing SMP alternatives: 24k freed
CPU0: AMD Athlon(tm) 64 Processor 3800+ stepping 02
Total of 1 processors activated (4802.33 BogoMIPS).
ENABLING IO-APIC IRQs
..TIMER: vector=0x31 apic1=0 pin1=2 apic2=0 pin2=0
Brought up 1 CPUs
migration_cost=0
checking if image is initramfs...it isn't (no cpio magic); looks like an initrd
Freeing initrd memory: 56k freed
NET: Registered protocol family 16
ACPI: bus type pci registered
PCI: Using MMCONFIG
PCI: No mmconfig possible on 0:0
PCI: No mmconfig possible on 0:1
PCI: No mmconfig possible on 0:f
PCI: No mmconfig possible on 0:10
PCI: No mmconfig possible on 0:11
PCI: No mmconfig possible on 0:12
PCI: No mmconfig possible on 0:13
PCI: No mmconfig possible on 0:18
PCI: No mmconfig possible on 1:0
PCI: No mmconfig possible on 5:b
PCI: No mmconfig possible on 5:d
Setting up standard PCI resources
ACPI: Subsystem revision 20060127
ACPI: Interpreter enabled
ACPI: Using IOAPIC for interrupt routing
ACPI: PCI Root Bridge [PCI0] (0000:00)
PCI: Probing PCI hardware (bus 00)
Boot video device is 0000:01:00.0
PCI: Transparent bridge - 0000:00:13.1
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P7._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P7.P7P8._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P7.P7P9._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0PA._PRT]
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 *5 6 7 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKD] (IRQs *3 4 5 6 7 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
Linux Plug and Play Support v0.97 (c) Adam Belay
pnp: PnP ACPI init
pnp: PnP ACPI: found 15 devices
PnPBIOS: Disabled by ACPI PNP
SCSI subsystem initialized
PCI: Using ACPI for IRQ routing
PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report
pnp: 00:07: ioport range 0xc00-0xc0f has been reserved
pnp: 00:07: ioport range 0xd00-0xd0f has been reserved
pnp: 00:07: ioport range 0xa20-0xa2f has been reserved
pnp: 00:07: ioport range 0xa30-0xa3f has been reserved
PCI: Bridge: 0000:00:01.0
IO window: disabled.
MEM window: fc900000-fe9fffff
PREFETCH window: afe00000-cfdfffff
PCI: Bridge: 0000:02:00.0
IO window: disabled.
MEM window: disabled.
PREFETCH window: disabled.
PCI: Bridge: 0000:02:00.1
IO window: disabled.
MEM window: disabled.
PREFETCH window: disabled.
PCI: Bridge: 0000:00:13.0
IO window: disabled.
MEM window: fea00000-feafffff
PREFETCH window: disabled.
PCI: Bridge: 0000:00:13.1
IO window: disabled.
MEM window: disabled.
PREFETCH window: cfe00000-d7efffff
PCI: Setting latency timer of device 0000:00:01.0 to 64
PCI: Setting latency timer of device 0000:00:13.0 to 64
PCI: Setting latency timer of device 0000:02:00.0 to 64
PCI: Setting latency timer of device 0000:02:00.1 to 64
PCI: Setting latency timer of device 0000:00:13.1 to 64
NET: Registered protocol family 2
IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
TCP established hash table entries: 131072 (order: 8, 1572864 bytes)
TCP bind hash table entries: 65536 (order: 7, 786432 bytes)
TCP: Hash tables configured (established 131072 bind 65536)
TCP reno registered
highmem bounce pool size: 64 pages
Total HugeTLB memory allocated, 0
VFS: Disk quotas dquot_6.5.1
Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
JFS: nTxBlock = 8066, nTxLock = 64533
SGI XFS with ACLs, security attributes, realtime, large block numbers, no debug enabled
SGI XFS Quota Management subsystem
Initializing Cryptographic API
io scheduler noop registered
io scheduler anticipatory registered (default)
io scheduler deadline registered
io scheduler cfq registered
PCI: Setting latency timer of device 0000:02:00.0 to 64
pcie_portdrv_probe->Dev[287c:1106] has invalid IRQ. Check vendor BIOS
assign_interrupt_mode Found MSI capability
Allocate Port Service[0000:02:00.0:pcie00]
Allocate Port Service[0000:02:00.0:pcie01]
Allocate Port Service[0000:02:00.0:pcie03]
PCI: Setting latency timer of device 0000:02:00.1 to 64
pcie_portdrv_probe->Dev[287d:1106] has invalid IRQ. Check vendor BIOS
assign_interrupt_mode Found MSI capability
Allocate Port Service[0000:02:00.1:pcie00]
Allocate Port Service[0000:02:00.1:pcie01]
Allocate Port Service[0000:02:00.1:pcie03]
isapnp: Scanning for PnP cards...
isapnp: No Plug & Play device found
Floppy drive(s): fd0 is 1.44M
FDC 0 is a post-1991 82077
RAMDISK driver initialized: 16 RAM disks of 4096K size 1024 blocksize
loop: loaded (max 8 devices)
Intel(R) PRO/1000 Network Driver - version 7.0.33-k2
Copyright (c) 1999-2005 Intel Corporation.
pcnet32.c:v1.32 18.Mar.2006 tsbogend@alpha.franken.de
e100: Intel(R) PRO/100 Network Driver, 3.5.10-k2-NAPI
e100: Copyright(c) 1999-2005 Intel Corporation
ns83820.c: National Semiconductor DP83820 10/100/1000 driver.
via-rhine.c:v1.10-LK1.2.0-2.6 June-10-2004 Written by Donald Becker
ACPI: PCI Interrupt 0000:00:12.0[A] -> GSI 23 (level, low) -> IRQ 16
eth0: VIA Rhine II at 0xfebff400, 00:17:31:b7:a6:e1, IRQ 16.
eth0: MII PHY found at address 1, status 0x786d advertising 01e1 Link 45e1.
forcedeth.c: Reverse Engineered nForce ethernet driver. Version 0.54.
dmfe: Davicom DM9xxx net driver, version 1.36.4 (2002-01-17)
winbond-840.c:v1.01-d (2.4 port) Nov-17-2001 Donald Becker <becker@scyld.com>
http://www.scyld.com/network/drivers.html
uli526x: ULi M5261/M5263 net driver, version 0.9.3 (2005-7-29)
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
VP_IDE: IDE controller at PCI slot 0000:00:0f.1
PCI: VIA IRQ fixup for 0000:00:0f.1, from 255 to 0
VP_IDE: chipset revision 7
VP_IDE: not 100% native mode: will probe irqs later
VP_IDE: VIA vt8251 (rev 00) IDE UDMA133 controller on pci0000:00:0f.1
ide0: BM-DMA at 0xfc00-0xfc07, BIOS settings: hda:DMA, hdb:pio
ide1: BM-DMA at 0xfc08-0xfc0f, BIOS settings: hdc:DMA, hdd:pio
Probing IDE interface ide0...
hda: ST3320620A, ATA DISK drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
Probing IDE interface ide1...
hdc: HL-DT-ST RW/DVD GCC-4520B, ATAPI CD/DVD-ROM drive
ide1 at 0x170-0x177,0x376 on irq 15
hda: max request size: 512KiB
hda: 625142448 sectors (320072 MB) w/16384KiB Cache, CHS=38913/255/63, UDMA(100)
hda: cache flushes supported
hda: hda1 hda2 hda3
hdc: ATAPI 52X DVD-ROM CD-R/RW drive, 2048kB Cache, UDMA(33)
Uniform CD-ROM driver Revision: 3.20
libata version 1.20 loaded.
PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12
serio: i8042 AUX port at 0x60,0x64 irq 12
serio: i8042 KBD port at 0x60,0x64 irq 1
mice: PS/2 mouse device common for all mice
md: linear personality registered for level -1
md: raid0 personality registered for level 0
md: raid1 personality registered for level 1
md: raid10 personality registered for level 10
md: raid5 personality registered for level 5
md: raid4 personality registered for level 4
raid5: automatically using best checksumming function: pIII_sse
pIII_sse : 7144.000 MB/sec
raid5: using function: pIII_sse (7144.000 MB/sec)
raid6: int32x1 769 MB/s
raid6: int32x2 1089 MB/s
raid6: int32x4 714 MB/s
raid6: int32x8 710 MB/s
raid6: mmxx1 1511 MB/s
input: AT Translated Set 2 keyboard as /class/input/input0
raid6: mmxx2 3003 MB/s
raid6: sse1x1 914 MB/s
raid6: sse1x2 1781 MB/s
raid6: sse2x1 1777 MB/s
raid6: sse2x2 2660 MB/s
raid6: using algorithm sse2x2 (2660 MB/s)
md: raid6 personality registered for level 6
md: multipath personality registered for level -4
md: faulty personality registered for level -5
md: md driver 0.90.3 MAX_MD_DEVS=256, MD_SB_DISKS=27
md: bitmap version 4.39
device-mapper: 4.6.0-ioctl (2006-02-17) initialised: dm-devel@redhat.com
TCP bic registered
NET: Registered protocol family 1
NET: Registered protocol family 15
Using IPI No-Shortcut mode
Suspend2 Core.
Suspend2 Compression Driver loading.
Suspend2 Encryption Driver loading.
Suspend2 Swap Writer loading.
Suspend2 FileWriter loading.
ACPI wakeup devices:
PCI0 PS2K PS2M UAR1 USB1 USB2 USB3 USB4 EHCI P7P8 P7P9 PCI1 PCI2 PCI3 ILAN SLPB PWRB
ACPI: (supports S0 S1 S3 S4 S5)
md: Autodetecting RAID arrays.
md: autorun ...
md: ... autorun DONE.
RAMDISK: Compressed image found at block 0
VFS: Mounted root (ext2 filesystem).
Suspend2 2.2.7.3: You need to use a resume2= command line parameter to tell Suspend2 where to look for an image.
Suspend2 2.2.7.3: Resume2 parameter is empty. Suspending will be disabled.
Suspend2 2.2.7.3: Missing or invalid storage location (resume2= parameter). Please correct and rerun lilo (or equivalent) before suspending.
(fs/jbd/recovery.c, 255): journal_recover: JBD: recovery, exit status 0, recovered transactions 41 to 134
(fs/jbd/recovery.c, 257): journal_recover: JBD: Replayed 3450 and revoked 3/3 blocks
input: ImExPS/2 Generic Explorer Mouse as /class/input/input1
kjournald starting. Commit interval 5 seconds
EXT3 FS on hda1, internal journal
EXT3-fs: recovery complete.
EXT3-fs: mounted filesystem with ordered data mode.
Freeing unused kernel memory: 252k freed
Adding 1959920k swap on /dev/hda2. Priority:-1 extents:1 across:1959920k
EXT3 FS on hda1, internal journal
megasas: 00.00.02.04 Fri Feb 03 14:31:44 PST 2006
3ware Storage Controller device driver for Linux v1.26.02.001.
3ware 9000 Storage Controller device driver for Linux v2.26.02.007.
Adaptec aacraid driver (1.1-5[2409]-mh1)
usbcore: registered new driver usbfs
usbcore: registered new driver hub
USB Universal Host Controller Interface driver v3.0
ACPI: PCI Interrupt 0000:00:10.0[A] -> GSI 20 (level, low) -> IRQ 17
PCI: VIA IRQ fixup for 0000:00:10.0, from 10 to 1
uhci_hcd 0000:00:10.0: UHCI Host Controller
uhci_hcd 0000:00:10.0: new USB bus registered, assigned bus number 1
uhci_hcd 0000:00:10.0: irq 17, io base 0x0000e080
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 2 ports detected
ACPI: PCI Interrupt 0000:00:10.1[C] -> GSI 22 (level, low) -> IRQ 18
PCI: VIA IRQ fixup for 0000:00:10.1, from 5 to 2
uhci_hcd 0000:00:10.1: UHCI Host Controller
uhci_hcd 0000:00:10.1: new USB bus registered, assigned bus number 2
uhci_hcd 0000:00:10.1: irq 18, io base 0x0000e000
usb usb2: configuration #1 chosen from 1 choice
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
ACPI: PCI Interrupt 0000:00:10.2[B] -> GSI 21 (level, low) -> IRQ 19
PCI: VIA IRQ fixup for 0000:00:10.2, from 11 to 3
uhci_hcd 0000:00:10.2: UHCI Host Controller
uhci_hcd 0000:00:10.2: new USB bus registered, assigned bus number 3
uhci_hcd 0000:00:10.2: irq 19, io base 0x0000dc00
usb usb3: configuration #1 chosen from 1 choice
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
ACPI: PCI Interrupt 0000:00:10.3[D] -> GSI 23 (level, low) -> IRQ 16
PCI: VIA IRQ fixup for 0000:00:10.3, from 3 to 0
uhci_hcd 0000:00:10.3: UHCI Host Controller
uhci_hcd 0000:00:10.3: new USB bus registered, assigned bus number 4
uhci_hcd 0000:00:10.3: irq 16, io base 0x0000d880
usb usb4: configuration #1 chosen from 1 choice
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 2 ports detected
ohci_hcd: 2005 April 22 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI)
ACPI: PCI Interrupt 0000:00:10.4[C] -> GSI 22 (level, low) -> IRQ 18
ehci_hcd 0000:00:10.4: EHCI Host Controller
ehci_hcd 0000:00:10.4: new USB bus registered, assigned bus number 5
ehci_hcd 0000:00:10.4: debug port 1
ehci_hcd 0000:00:10.4: irq 18, io mem 0xfebff800
ehci_hcd 0000:00:10.4: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
usb usb5: configuration #1 chosen from 1 choice
hub 5-0:1.0: USB hub found
hub 5-0:1.0: 8 ports detected
ieee1394: Initialized config rom entry `ip1394'
Generic RTC Driver v1.07
ACPI: Power Button (FF) [PWRF]
ACPI: Sleep Button (CM) [SLPB]
ACPI: Power Button (CM) [PWRB]
ACPI: Processor [CPU1] (supports 16 throttling states)
Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing disabled
serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
parport: PnPBIOS parport detected.
parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE]
ACPI: PCI Interrupt 0000:02:01.0[A] -> GSI 17 (level, low) -> IRQ 20
PCI: Setting latency timer of device 0000:02:01.0 to 64
Linux agpgart interface v0.101 (c) Dave Jones
agpgart: Detected AGP bridge 0
agpgart: AGP aperture is 128M @ 0xd8000000
NET: Registered protocol family 17
Linux video capture interface: v1.00
bttv: driver version 0.9.16 loaded
bttv: using 8 buffers with 2080k (520 pages) each for capture
bt878: AUDIO driver version 0.0.0 loaded
saa7146: register extension 'dvb'.
saa7146: register extension 'budget dvb'.
saa7146: register extension 'budget_ci dvb'.
saa7146: register extension 'budget_av'.
usbcore: registered new driver ttusb
usbcore: registered new driver ttusb-dec
usbcore: registered new driver hiddev
usbcore: registered new driver usbhid
drivers/usb/input/hid-core.c: v2.6:USB HID core driver
NET: Registered protocol family 10
lo: Disabled Privacy Extensions
IPv6 over IPv4 tunneling driver
ttyS1: LSR safety check engaged!
ttyS1: LSR safety check engaged!
kjournald starting. Commit interval 5 seconds
EXT3 FS on hda3, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
Warning: /proc/ide/hd?/settings interface is obsolete, and will be removed soon!
ts: Compaq touchscreen protocol output
00:0c: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
nvidia: module license 'NVIDIA' taints kernel.
ACPI: PCI Interrupt 0000:01:00.0[A] -> GSI 16 (level, low) -> IRQ 21
NVRM: loading NVIDIA Linux x86 Kernel Module 1.0-8774 Tue Aug 1 20:54:08 PDT 2006
ACPI: PCI Interrupt 0000:01:00.0[A] -> GSI 16 (level, low) -> IRQ 21
NVRM: loading NVIDIA Linux x86 Kernel Module 1.0-8774 Tue Aug 1 20:54:08 PDT 2006
agpgart: Found an AGP 3.0 compliant device at 0000:00:00.0.
agpgart: Putting AGP V3 device at 0000:00:00.0 into 8x mode
agpgart: Putting AGP V3 device at 0000:01:00.0 into 8x mode
ivtv: ==================== START INIT IVTV ====================
ivtv: version 0.7.0 (tagged release) loading
ivtv: Linux version: 2.6.17-chw-8 SMP preempt mod_unload 586 gcc-3.4
ivtv: In case of problems please include the debug info between
ivtv: the START INIT IVTV and END INIT IVTV lines, along with
ivtv: any module options, when mailing the ivtv-users mailinglist.
ivtv: ==================== END INIT IVTV ====================
eth0: link up, 100Mbps, full-duplex, lpa 0x45E1
eth0: link up, 100Mbps, full-duplex, lpa 0x45E1
eth0: no IPv6 routers present

Thx for any help

i`v seen a post (http://forums.viaarena.com/messageview. ... erthread=y)

with the same problem that I have, but with ubuntu.

The solution was?

You can try the "pci=conf1" option in GRUB memu to boot the OS.
The VT8251 Audio Controller should work with this option.

But I don`t have a clue to how do this on knopmyth.

Any help?

[]s Humberto

A little more info:

I've installed ubuntu and had the same problem. Gone to boot/grub/menu.lst and add the pci=conf1 and the cards were detected. So I'm confident that if I can do the same procedure on knoppmyh I will be able to install my machine.

Any tips?

[]s Humberto