View unanswered posts    View active topics

Board index KnoppMyth Hardware

All times are UTC - 6 hours





Post new topic Reply to topic  Page 1 of 1
  [ 3 posts ] 
Print view Previous topic   Next topic  
Author Message
Search for:
cowboy3398
PostPosted: Tue Apr 17, 2007 3:30 am 
Offline
Joined: Sat Oct 08, 2005 2:36 pm
Posts: 7
I used this setup with R5C7 without issues. I've looked through the posts and hope I haven't missed a solution that's already been posted.

No problem with the PVR-350. It records perfectly. The PVR-150 on the other hand appears to be losing sync with tearing and blockiness. Switching the cables between the 2 tuner cards had no effect.

Does anyone have any suggestions as to where to look in solving this problem?

(Tip for testing: By setting the 350 as the higher priority record card, the contents shown while watching live TV always come from the PVR-150 -- great for diagnosis purposes.)

"Attached" is
cat kern.log | grep ivtv

(Anyone know anything regarding the warnings shown at very end of output?)

Code:
Apr 17 02:16:02 mythtv kernel: ivtv:  ==================== START INIT IVTV ====================
Apr 17 02:16:02 mythtv kernel: ivtv:  version 0.8.2 (tagged release) loading
Apr 17 02:16:02 mythtv kernel: ivtv:  Linux version: 2.6.18-chw-13 SMP preempt mod_unload 586 gcc-4.1
Apr 17 02:16:02 mythtv kernel: ivtv:  In case of problems please include the debug info between
Apr 17 02:16:02 mythtv kernel: ivtv:  the START INIT IVTV and END INIT IVTV lines, along with
Apr 17 02:16:02 mythtv kernel: ivtv:  any module options, when mailing the ivtv-users mailinglist.
Apr 17 02:16:02 mythtv kernel: ivtv0: Autodetected Hauppauge card (cx23415 based)
Apr 17 02:16:02 mythtv kernel: ivtv0: loaded v4l-cx2341x-enc.fw firmware (262144 bytes)
Apr 17 02:16:02 mythtv kernel: ivtv0: loaded v4l-cx2341x-dec.fw firmware (262144 bytes)
Apr 17 02:16:02 mythtv kernel: tuner 2-0061: chip found @ 0xc2 (ivtv i2c driver #0)
Apr 17 02:16:02 mythtv kernel: msp3400 2-0040: MSP4448G-A2 found @ 0x80 (ivtv i2c driver #0)
Apr 17 02:16:02 mythtv kernel: saa7115 2-0021: saa7115 found @ 0x42 (ivtv i2c driver #0)
Apr 17 02:16:02 mythtv kernel: ivtv0: Autodetected Hauppauge WinTV PVR-350
Apr 17 02:16:02 mythtv kernel: saa7127 2-0044: saa7127 found @ 0x88 (ivtv i2c driver #0)
Apr 17 02:16:02 mythtv kernel: ivtv0: Encoder revision: 0x02050032
Apr 17 02:16:02 mythtv kernel: ivtv0: Decoder revision: 0x02020023
Apr 17 02:16:02 mythtv kernel: ivtv0: Registered device video0 for encoder MPEG
Apr 17 02:16:02 mythtv kernel: ivtv0: Registered device video32 for encoder YUV
Apr 17 02:16:02 mythtv kernel: ivtv0: Registered device vbi0 for encoder VBI
Apr 17 02:16:02 mythtv kernel: ivtv0: Registered device video24 for encoder PCM audio
Apr 17 02:16:02 mythtv kernel: ivtv0: Registered device radio0 for encoder radio
Apr 17 02:16:02 mythtv kernel: ivtv0: Registered device video16 for decoder MPEG
Apr 17 02:16:02 mythtv kernel: ivtv0: Registered device vbi8 for decoder VBI
Apr 17 02:16:02 mythtv kernel: ivtv0: Registered device vbi16 for decoder VOUT
Apr 17 02:16:02 mythtv kernel: ivtv0: Registered device video48 for decoder YUV
Apr 17 02:16:02 mythtv kernel: ivtv0: loaded v4l-cx2341x-init.mpg firmware (155648 bytes)
Apr 17 02:16:02 mythtv kernel: ivtv0: Initialized Hauppauge WinTV PVR-350, card #0
Apr 17 02:16:02 mythtv kernel: ivtv:  ======================  NEXT CARD  ======================
Apr 17 02:16:02 mythtv kernel: ivtv1: Autodetected Hauppauge card (cx23416 based)
Apr 17 02:16:02 mythtv kernel: ivtv1: loaded v4l-cx2341x-enc.fw firmware (262144 bytes)
Apr 17 02:16:02 mythtv kernel: tuner 3-0061: chip found @ 0xc2 (ivtv i2c driver #1)
Apr 17 02:16:02 mythtv kernel: ivtv1: Autodetected Hauppauge WinTV PVR-150
Apr 17 02:16:02 mythtv kernel: ivtv1: reopen i2c bus for IR-blaster support
Apr 17 02:16:02 mythtv kernel: tuner 3-0061: chip found @ 0xc2 (ivtv i2c driver #1)
Apr 17 02:16:02 mythtv kernel: cx25840 3-0044: cx25841-23 found @ 0x88 (ivtv i2c driver #1)
Apr 17 02:16:02 mythtv kernel: wm8775 3-001b: chip found @ 0x36 (ivtv i2c driver #1)
Apr 17 02:16:02 mythtv kernel: ivtv1: Encoder revision: 0x02050032
Apr 17 02:16:02 mythtv kernel: ivtv1: Registered device video1 for encoder MPEG
Apr 17 02:16:02 mythtv kernel: ivtv1: Registered device video33 for encoder YUV
Apr 17 02:16:02 mythtv kernel: ivtv1: Registered device vbi1 for encoder VBI
Apr 17 02:16:02 mythtv kernel: ivtv1: Registered device video25 for encoder PCM audio
Apr 17 02:16:02 mythtv kernel: ivtv1: Initialized Hauppauge WinTV PVR-150, card #1
Apr 17 02:16:02 mythtv kernel: ivtv:  ====================  END INIT IVTV  ====================
Apr 17 02:16:02 mythtv kernel: ivtv0-osd: Framebuffer module loaded (attached to ivtv card id 0)
Apr 17 02:16:02 mythtv kernel: ivtv0-osd: screen coords: [0 0] -> [720 480]
Apr 17 02:16:02 mythtv kernel: ivtv0-osd: original global alpha = 208
Apr 17 02:16:02 mythtv kernel: ivtv0-osd: current OSD state = 39
Apr 17 02:16:02 mythtv kernel: ivtv0-osd: new global alpha = 208 (1 255 0)
Apr 17 02:16:02 mythtv kernel: ivtv0-osd: framebuffer at 0xe9510000, mapped to 0xe1a10000, size 1665k
Apr 17 02:16:02 mythtv kernel: ivtv0-osd: mode is 720x480x32, linelength=2880
Apr 17 02:16:02 mythtv kernel: ivtv0-osd warning: ivtvfb_set_par
Apr 17 02:16:02 mythtv kernel: ivtv0-osd: fb0: cx23415 TV out frame buffer device
Apr 17 02:16:13 mythtv kernel: ivtv0-osd warning: ivtvfb_check_var
Apr 17 02:16:13 mythtv kernel: ivtv0-osd warning: ivtvfb_check_var
Apr 17 02:16:13 mythtv kernel: ivtv0-osd warning: ivtvfb_set_par
Top
 Profile  
 
tjc
 Post subject:
PostPosted: Tue Apr 17, 2007 6:16 pm 
Offline
Joined: Thu Mar 25, 2004 11:00 am
Posts: 9551
Location: Arlington, MA
See known issue #3 here: http://mysettopbox.tv/phpBB2/viewtopic.php?t=13108

Also see the last several postings here: http://mysettopbox.tv/phpBB2/viewtopic.php?t=4325
Top
 Profile  
 
cowboy3398
 Post subject:
PostPosted: Wed Apr 18, 2007 1:43 am 
Offline
Joined: Sat Oct 08, 2005 2:36 pm
Posts: 7
:shock: How did I miss that! :oops: Changing the recording profile resolution solved the problem :D

For other noobs like me, you can find it in:
Utilities/Setup -> Setup -> TV Settings -> Recoding Profiles
Top
 Profile  
 

Display posts from previous:  Sort by  
Post new topic Reply to topic  Page 1 of 1
  [ 3 posts ] 


Board index KnoppMyth Hardware

All times are UTC - 6 hours




Who is online

Users browsing this forum: No registered users and 1 guest

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Jump to:  
cron
Powered by phpBB® Forum Software © phpBB Group

Theme Created By ceyhansuyu