View unanswered posts    View active topics

Board index KnoppMyth Hardware

All times are UTC - 6 hours





Post new topic Reply to topic  Page 6 of 6
  [ 79 posts ] 
Go to page Previous  1, 2, 3, 4, 5, 6
Print view Previous topic   Next topic  
Author Message
Search for:
dwaine
 Post subject: Re: More info
PostPosted: Wed Jul 04, 2007 4:14 pm 
Offline
Joined: Thu Dec 01, 2005 12:46 am
Posts: 135
poflynn wrote:
So I broke out my Windoze box and put the card in that & installed the included s/w. I immediately got all of the analog channels & digital while plugged into the lower plug. Most digital were encrypted but not all, it seemed I could get the network HD channels just fine. In fact, I picked up channels if I selected "BDA ATSC Tuner" or "BDA Analog Capture" which were the first two choices it presented me with.

What a disappointment I can't seem to get it working on KnoppMyth. I'm about ready now to return it and fork out the money for a Hauppage to save myself further time & frustration (I hope, else I'll be forced to use Windoze!).



Ummm... I don't get it. I have this card and it works absolutely great. I get OTA, QAM256 and analog channels. I even hacked up the kernel driver to get the remote working.

Just set up the card with mythsetup and then scanning for the channels within mythsetup.

That's it.... I see your message log files and they look perfect.

Dwaine
Top
 Profile  
 
no2u
 Post subject:
PostPosted: Sat Jul 07, 2007 10:40 pm 
Offline
Joined: Thu Feb 24, 2005 2:50 am
Posts: 60
Can't comment on R5E50, but using a Kworld ATSC 115 with R5F1, I pick up both ATSC Broadcast (if connected to an antenna) and QAM (if connected to cable) on the TOP connector. Note this is different from Windoze where the top connector is ATSC Broadcast only and the bottom connector is used for QAM and Analog.

BTW, it's my understanding that some upcoming DVB driver change may allow QAM to be switched to the lower input for those who want to connect an antenna to one input for ATSC and a cable to the other for QAM & analog, or don't wish to split up the cable signal to attach to both input connectors.
Top
 Profile  
 
steelsmack
 Post subject: remote patch
PostPosted: Wed Mar 26, 2008 5:06 pm 
Offline
Joined: Thu Nov 15, 2007 1:10 pm
Posts: 1
So I'm a total linux n00b and I was curious if the remote patch works on r5f27, and if so, if someone could walk me through how to do it (as I am a total linux n00b). I'm not sure I understand exactly what I am patching, and cannot for the life of me find anyone that has clear instructions on it. Thanks!
Top
 Profile  
 
tjc
 Post subject:
PostPosted: Wed Mar 26, 2008 6:08 pm 
Offline
Joined: Thu Mar 25, 2004 11:00 am
Posts: 9551
Location: Arlington, MA
Since the last previous activity on this thread was _before_ the R5F27 release, you may want to look for a more recent discussion... Like http://knoppmyth.net/phpBB2/viewtopic.php?t=16665 Since that's a Tier 1 posting in theory it "just worked" with no fussing around.

Or maybe the writeup here on the wiki... http://www.knoppmythwiki.org/index.php?page=kworld115HowTo
Top
 Profile  
 

Display posts from previous:  Sort by  
Post new topic Reply to topic  Page 6 of 6
  [ 79 posts ] 
Go to page Previous  1, 2, 3, 4, 5, 6


Board index KnoppMyth Hardware

All times are UTC - 6 hours




Who is online

Users browsing this forum: No registered users and 10 guests

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Jump to:  
cron
Powered by phpBB® Forum Software © phpBB Group

Theme Created By ceyhansuyu