LinHES Forums http://forums.linhes.org/ |
|
UPS monitoring set up? http://forums.linhes.org/viewtopic.php?f=2&t=1301 |
Page 2 of 2 |
Author: | snaproll [ Sat Mar 07, 2009 9:45 am ] |
Post subject: | |
/etc/apcupsd/ exists: [root@mythtv6 apcupsd]# dir apccontrol apcupsd.css commfailure hosts.conf multimon.conf onbattery upsimage.cgi apcupsd.conf changeme commok multimon.cgi offbattery upsfstats.cgi upsstats.cgi running your commands raises questions ?? [root@mythtv6 apcupsd]# sv status apcupsd fail: apcupsd: unable to change to service directory: file does not exist [root@mythtv6 apcupsd]# sv restart apcupsd fail: apcupsd: unable to change to service directory: file does not exist If I just type apcupsd: [root@mythtv6 apcupsd]# apcupsd [root@mythtv6 apcupsd]# It doesn't error ? The .conf file lines are correct as you listed them. And NETSERVER on but it has a connection problem ? [root@mythtv6 log]# apcaccess status Error contacting apcupsd @ localhost:3551: Connection refused I have apcupsd running on another machine (running 5.5) and may steal that conf file, but this machine running 6 may have version differences. This test machine ran apcupsd fine when it was running 5.5. I may still have something obvious, but every time I look at it I see 2 + 2 =5.. . Nods OK... moves on.. |
Author: | mihanson [ Sat Mar 07, 2009 11:21 am ] |
Post subject: | |
snaproll wrote: [root@mythtv6 apcupsd]# sv status apcupsd
fail: apcupsd: unable to change to service directory: file does not exist [root@mythtv6 apcupsd]# sv restart apcupsd fail: apcupsd: unable to change to service directory: file does not exist Code: # add_service.sh apcupsd ; sv restart apcupsd
|
Author: | snaproll [ Sat Mar 07, 2009 1:05 pm ] |
Post subject: | |
Code: [root@mythtv6 greg]# add_service.sh apcupsd ; sv restart apcupsd adding apcupsd warning: apcupsd: unable to open supervise/ok: file does not exist [root@mythtv6 greg]# So I repeated the sv restart command by itself.. then- Code: [root@mythtv6 ~]# cd /var/log/ [root@mythtv6 log]# dir Xorg.0.log auth.log errors.log kernel.log.1 messages.log.1 old user.log Xorg.0.log.old auth.log.1 errors.log.1 lastlog mysqld.log pacman.log user.log.1 acpid.log btmp everything.log lighttpd mythtv sv utmp acpid.log.1 daemon.log everything.log.1 lircd mythvantage_install.log syslog.log wtmp apcupsd.events daemon.log.1 fluxbox.log lircd.1 network.init syslog.log.1 wtmp.1 apcupsd.status dmesg.log kernel.log messages.log network.init.error tweaker.log [root@mythtv6 log]# ....& a nano of apcupsd status & apcupsd.events now prints them out...and- Code: [root@mythtv6 log]# apcaccess status
APC : 001,036,0895 DATE : Sat Mar 07 11:55:35 CST 2009 HOSTNAME : mythtv6 RELEASE : 3.14.5 VERSION : 3.14.5 (10 January 2009) unknown UPSNAME : mythtv6 CABLE : USB Cable MODEL : Back-UPS ES 550 UPSMODE : Stand Alone STARTTIME: Sat Mar 07 11:44:28 CST 2009 STATUS : ONLINE LINEV : 124.0 Volts LOADPCT : 32.0 Percent Load Capacity BCHARGE : 100.0 Percent TIMELEFT : 14.6 Minutes MBATTCHG : 5 Percent MINTIMEL : 3 Minutes MAXTIME : 0 Seconds SENSE : Medium LOTRANS : 092.0 Volts HITRANS : 139.0 Volts ALARMDEL : Always BATTV : 13.5 Volts LASTXFER : Low line voltage NUMXFERS : 0 TONBATT : 0 seconds CUMONBATT: 0 seconds XOFFBATT : N/A STATFLAG : 0x07000008 Status Flag MANDATE : 2008-07-03 SERIALNO : 3B1807X35264 BATTDATE : 2000-00-00 NOMINV : 115 Volts NOMBATTV : 12.0 Volts FIRMWARE : 843.K1 .D USB FW:K1 APCMODEL : Back-UPS ES 550 END APC : Sat Mar 07 11:56:21 CST 2009 Thank you sir !.... Do you suppose my install dropped a stitch, or will everybody running a UPS on 6, need to run your commands to bring it up ? |
Author: | tscholl [ Tue Apr 27, 2010 4:34 pm ] |
Post subject: | |
I have apcupsd running but when I try to get it's status apcaccess status I get the following message: Code: Error contacting apcupsd @ localhost:3551: Operation not permitted
Does anyone know how to get around this error? By the way it appears that I do have valid information written to the apcupsd.status and apcupsd.events files. Thanks Tim |
Author: | knappster [ Tue Apr 27, 2010 7:44 pm ] |
Post subject: | |
Ironically I just tried the same thing and I am having the same problem. I'll let you know if I find anything. (I haven't tried restarting yet) |
Author: | knappster [ Fri May 07, 2010 11:50 am ] |
Post subject: | |
Any luck tscholl? I have been unable to make any progress. I wonder if installing from source could help... |
Author: | brfransen [ Fri May 07, 2010 12:10 pm ] |
Post subject: | |
I can't reproduce the problem here but have you checked permissions on /sbin/apcaccess and /var/log/apcupsd.status? Do you get the same if you sudo apcaccess status? |
Author: | knappster [ Fri May 07, 2010 12:24 pm ] |
Post subject: | |
I do get the same message if I sudo and also if I am logged in as root. I didn't check permissions as I didn't suppose it would matter if it denied root access as well. I'll try to provide a lot more information about my software versions and the part # of my UPS, etc. when I have a chance. |
Author: | nmcaullay [ Mon May 17, 2010 8:25 am ] |
Post subject: | |
Just a short note to say how bloody wonderous this forum is... took delivery of an APC Back-UPS 700 today, plugged it in... pacman installed apcupsd (as above), did the tricks above, and hey-presto... I have a UPS powered and protected LinHES system! No configuration changes required, just that little dance about the services (sv etc). Top stuff! Nathan |
Author: | snaproll [ Mon May 17, 2010 10:48 am ] |
Post subject: | |
A quick note: I run four APC UPS's on linux machines running apcupsd in my house. I use Gapcmon (a linux apcupsd monitor program) to monitor all of them from one desktop (running Kubuntu). |
Author: | tscholl [ Mon May 17, 2010 3:04 pm ] |
Post subject: | |
No luck here, still getting the same message. I think it is working but can't be sure. If you stop the service Code: sv stop apcupsd you can run Code: apctest apctest works ok, and after you restart the service Code: sv start apcupsd
you do get good status information in /var/log/apcupsd.status It would be nice to get this resolved though. |
Author: | knappster [ Mon May 17, 2010 3:16 pm ] |
Post subject: | |
Same here tscholl... I think I am on R6.00, how about you? I may just unplug the UPS sometime and see if my unit shuts down gracefully. |
Author: | tscholl [ Mon May 17, 2010 4:36 pm ] |
Post subject: | |
I'm Running R6.02 and according to pacman it running apcupsd-3.14.5-2 |
Author: | knappster [ Sun Oct 31, 2010 9:02 pm ] |
Post subject: | |
After upgrading to 6.03 it does not work at all on my machine. I have apcupsd v3.14.8 the message in /var/log/apcupsd.events is: Code: 2010-10-31 20:09:55 -0500 apcupsd FATAL ERROR in linux-usb.c at line 609
Cannot find UPS device -- For a link to detailed USB trouble shooting information, please see <http://www.apcupsd.com/support.html>. 2010-10-31 20:09:55 -0500 apcupsd error shutdown completed It appears to keep attempting to restart every minute, which just fills the log. I tried removing it and installing from source, but the same problem there, too. I am just removing it for the time being. |
Page 2 of 2 | All times are UTC - 6 hours |
Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |