I'm also curious about this one, would love to know exactly how to set up the PVR-350 for S-video out. Any info would be helpful.
Thanks
| LinHES Forums http://forums.linhes.org/ |
|
| R5E50 and PVR-350 TV-Out [SOLVED] http://forums.linhes.org/viewtopic.php?f=2&t=13560 |
Page 1 of 1 |
| Author: | Krem1120 [ Tue Jan 16, 2007 11:06 am ] |
| Post subject: | R5E50 and PVR-350 TV-Out [SOLVED] |
I am unable to get my TV-Out working w/ my PVR-350 doing a clean install of R5E50. I cofigured my xorg.conf correctly, and I come up with a blank screen when loading. Here is my errors. --- root@mythtv:/var/log# less Xorg.0.log | grep EE Current Operating System: Linux mythtv 2.6.18-chw-13 #1 SMP PREEMPT Sun Dec 3 23:47:01 PST 2006 i686 (WW) warning, (EE) error, (NI) not implemented, (??) unknown. (II) Loading extension MIT-SCREEN-SAVER (EE) IVTVDEV_TST(0)Framebuffer id from dev /dev/fb0is 0 (EE) IVTVDEV_TST(0)open /dev/video48 returned 7 (EE) IVTVDEV_TST(0)get_fb returned 0 fbid 0 (EE) AIGLX: Screen 0 is not DRI capable --- --- root@mythtv:/var/log# less /var/log/messages | grep ivtv Jan 15 22:02:23 mythtv kernel: ivtv: ==================== START INIT IVTV ==================== Jan 15 22:02:23 mythtv kernel: ivtv: version 0.8.2 (tagged release) loading Jan 15 22:02:23 mythtv kernel: ivtv: Linux version: 2.6.18-chw-13 SMP preempt mod_unload 586 gcc-4.1 Jan 15 22:02:23 mythtv kernel: ivtv: In case of problems please include the debug info between Jan 15 22:02:23 mythtv kernel: ivtv: the START INIT IVTV and END INIT IVTV lines, along with Jan 15 22:02:23 mythtv kernel: ivtv: any module options, when mailing the ivtv-users mailinglist. Jan 15 22:02:23 mythtv kernel: ivtv0: Autodetected Hauppauge card (cx23415 based) Jan 15 22:02:23 mythtv kernel: ivtv0: loaded v4l-cx2341x-enc.fw firmware (262144 bytes) Jan 15 22:02:23 mythtv kernel: ivtv0: loaded v4l-cx2341x-dec.fw firmware (262144 bytes) Jan 15 22:02:23 mythtv kernel: tuner 0-0043: chip found @ 0x86 (ivtv i2c driver #0) Jan 15 22:02:23 mythtv kernel: tuner 0-0061: chip found @ 0xc2 (ivtv i2c driver #0) Jan 15 22:02:23 mythtv kernel: msp3400 0-0040: MSP4448G-A2 found @ 0x80 (ivtv i2c driver #0) Jan 15 22:02:23 mythtv kernel: saa7115 0-0021: saa7115 found @ 0x42 (ivtv i2c driver #0) Jan 15 22:02:23 mythtv kernel: ivtv0: Autodetected Hauppauge WinTV PVR-350 Jan 15 22:02:23 mythtv kernel: saa7127 0-0044: saa7129 found @ 0x88 (ivtv i2c driver #0) Jan 15 22:02:23 mythtv kernel: ivtv0: Encoder revision: 0x02050032 Jan 15 22:02:23 mythtv kernel: ivtv0: Decoder revision: 0x02020023 Jan 15 22:02:23 mythtv kernel: ivtv0: Registered device video0 for encoder MPEG Jan 15 22:02:23 mythtv kernel: ivtv0: Registered device video32 for encoder YUV Jan 15 22:02:23 mythtv kernel: ivtv0: Registered device vbi0 for encoder VBI Jan 15 22:02:23 mythtv kernel: ivtv0: Registered device video24 for encoder PCM audio Jan 15 22:02:23 mythtv kernel: ivtv0: Registered device radio0 for encoder radio Jan 15 22:02:23 mythtv kernel: ivtv0: Registered device video16 for decoder MPEG Jan 15 22:02:23 mythtv kernel: ivtv0: Registered device vbi8 for decoder VBI Jan 15 22:02:23 mythtv kernel: ivtv0: Registered device vbi16 for decoder VOUT Jan 15 22:02:23 mythtv kernel: ivtv0: Registered device video48 for decoder YUV Jan 15 22:02:23 mythtv kernel: ivtv0: loaded v4l-cx2341x-init.mpg firmware (155648 bytes) Jan 15 22:02:23 mythtv kernel: ivtv0: Initialized Hauppauge WinTV PVR-350, card #0 Jan 15 22:02:23 mythtv kernel: ivtv: ==================== END INIT IVTV ==================== Jan 15 22:03:14 mythtv kernel: ivtv0-osd: Framebuffer module loaded (attached to ivtv card id 0) Jan 15 22:03:14 mythtv kernel: ivtv0-osd: screen coords: [0 0] -> [720 480] Jan 15 22:03:14 mythtv kernel: ivtv0-osd: original global alpha = 208 Jan 15 22:03:14 mythtv kernel: ivtv0-osd: current OSD state = 39 Jan 15 22:03:14 mythtv kernel: ivtv0-osd: new global alpha = 208 (1 255 0) Jan 15 22:03:14 mythtv kernel: ivtv0-osd: framebuffer at 0x45510000, mapped to 0xc9810000, size 1665k Jan 15 22:03:14 mythtv kernel: ivtv0-osd: mode is 720x480x32, linelength=2880 Jan 15 22:03:14 mythtv kernel: ivtv0-osd: fb0: cx23415 TV out frame buffer device Jan 15 22:03:14 mythtv kernel: [<c9e7adce>] ivtv_init_buffer+0x3e/0x1c0 [ivtv_fb] Jan 15 22:03:14 mythtv kernel: [<c9e7bc8d>] ivtv_stream_alloc+0x12d/0x350 [ivtv_fb] Jan 15 22:03:14 mythtv kernel: [<c9e5844e>] init_module+0x44e/0x546 [ivtv_fb] Jan 15 22:03:14 mythtv kernel: ivtv0 warning: No memory on buffer alloc! Jan 15 22:03:14 mythtv kernel: ivtv0 warning: Buffer alloc failed! Jan 15 22:03:14 mythtv kernel: ivtv0-osd warning: Error allocating OSD Stream Jan 15 22:14:41 mythtv kernel: ivtv0-osd warning: ivtvfb_check_var Jan 15 22:14:41 mythtv kernel: ivtv0-osd warning: ivtvfb_set_par Jan 15 22:14:44 mythtv kernel: ivtv0-osd warning: ivtvfb_check_var Jan 15 22:14:44 mythtv kernel: ivtv0-osd warning: ivtvfb_check_var Jan 15 22:14:44 mythtv kernel: ivtv0-osd warning: ivtvfb_set_par Jan 15 22:22:04 mythtv kernel: ivtv0-osd warning: ivtvfb_check_var Jan 15 22:22:04 mythtv kernel: ivtv0-osd warning: ivtvfb_set_par Jan 15 22:22:04 mythtv kernel: ivtv0-osd warning: ivtvfb_check_var Jan 15 22:22:04 mythtv kernel: ivtv0-osd warning: ivtvfb_set_par Jan 15 22:22:06 mythtv kernel: ivtv0-osd warning: ivtvfb_check_var Jan 15 22:22:06 mythtv kernel: ivtv0-osd warning: ivtvfb_check_var Jan 15 22:22:06 mythtv kernel: ivtv0-osd warning: ivtvfb_set_par Jan 16 00:27:02 mythtv kernel: ivtv: ==================== START INIT IVTV ==================== Jan 16 00:27:02 mythtv kernel: ivtv: version 0.8.2 (tagged release) loading Jan 16 00:27:02 mythtv kernel: ivtv: Linux version: 2.6.18-chw-13 SMP preempt mod_unload 586 gcc-4.1 Jan 16 00:27:02 mythtv kernel: ivtv: In case of problems please include the debug info between Jan 16 00:27:02 mythtv kernel: ivtv: the START INIT IVTV and END INIT IVTV lines, along with Jan 16 00:27:02 mythtv kernel: ivtv: any module options, when mailing the ivtv-users mailinglist. Jan 16 00:27:02 mythtv kernel: ivtv0: Autodetected Hauppauge card (cx23415 based) Jan 16 00:27:02 mythtv kernel: ivtv0: loaded v4l-cx2341x-enc.fw firmware (262144 bytes) Jan 16 00:27:02 mythtv kernel: ivtv0: loaded v4l-cx2341x-dec.fw firmware (262144 bytes) Jan 16 00:27:02 mythtv kernel: tuner 0-0043: chip found @ 0x86 (ivtv i2c driver #0) Jan 16 00:27:02 mythtv kernel: tuner 0-0061: chip found @ 0xc2 (ivtv i2c driver #0) Jan 16 00:27:02 mythtv kernel: msp3400 0-0040: MSP4448G-A2 found @ 0x80 (ivtv i2c driver #0) Jan 16 00:27:02 mythtv kernel: saa7115 0-0021: saa7115 found @ 0x42 (ivtv i2c driver #0) Jan 16 00:27:02 mythtv kernel: ivtv0: Autodetected Hauppauge WinTV PVR-350 Jan 16 00:27:02 mythtv kernel: saa7127 0-0044: saa7129 found @ 0x88 (ivtv i2c driver #0) Jan 16 00:27:02 mythtv kernel: ivtv0: Encoder revision: 0x02050032 Jan 16 00:27:02 mythtv kernel: ivtv0: Decoder revision: 0x02020023 Jan 16 00:27:02 mythtv kernel: ivtv0: Registered device video0 for encoder MPEG Jan 16 00:27:02 mythtv kernel: ivtv0: Registered device video32 for encoder YUV Jan 16 00:27:02 mythtv kernel: ivtv0: Registered device vbi0 for encoder VBI Jan 16 00:27:02 mythtv kernel: ivtv0: Registered device video24 for encoder PCM audio Jan 16 00:27:02 mythtv kernel: ivtv0: Registered device radio0 for encoder radio Jan 16 00:27:02 mythtv kernel: ivtv0: Registered device video16 for decoder MPEG Jan 16 00:27:02 mythtv kernel: ivtv0: Registered device vbi8 for decoder VBI Jan 16 00:27:02 mythtv kernel: ivtv0: Registered device vbi16 for decoder VOUT Jan 16 00:27:02 mythtv kernel: ivtv0: Registered device video48 for decoder YUV Jan 16 00:27:02 mythtv kernel: ivtv0: loaded v4l-cx2341x-init.mpg firmware (155648 bytes) Jan 16 00:27:02 mythtv kernel: ivtv0: Initialized Hauppauge WinTV PVR-350, card #0 Jan 16 00:27:02 mythtv kernel: ivtv: ==================== END INIT IVTV ==================== Jan 16 00:27:02 mythtv kernel: ivtv0-osd: Framebuffer module loaded (attached to ivtv card id 0) Jan 16 00:27:02 mythtv kernel: ivtv0-osd: screen coords: [0 0] -> [720 480] Jan 16 00:27:02 mythtv kernel: ivtv0-osd: original global alpha = 208 Jan 16 00:27:02 mythtv kernel: ivtv0-osd: current OSD state = 39 Jan 16 00:27:02 mythtv kernel: ivtv0-osd: new global alpha = 208 (1 255 0) Jan 16 00:27:02 mythtv kernel: ivtv0-osd: framebuffer at 0x45510000, mapped to 0xc9890000, size 1665k Jan 16 00:27:02 mythtv kernel: ivtv0-osd: mode is 720x480x32, linelength=2880 Jan 16 00:27:02 mythtv kernel: ivtv0-osd warning: ivtvfb_set_par Jan 16 00:27:02 mythtv kernel: ivtv0-osd: fb0: cx23415 TV out frame buffer device Jan 16 00:27:17 mythtv kernel: ivtv0-osd warning: ivtvfb_check_var Jan 16 00:27:17 mythtv kernel: ivtv0-osd warning: ivtvfb_check_var Jan 16 00:27:17 mythtv kernel: ivtv0-osd warning: ivtvfb_set_par Jan 16 01:09:15 mythtv kernel: ivtv: ==================== START INIT IVTV ==================== Jan 16 01:09:15 mythtv kernel: ivtv: version 0.8.2 (tagged release) loading Jan 16 01:09:15 mythtv kernel: ivtv: Linux version: 2.6.18-chw-13 SMP preempt mod_unload 586 gcc-4.1 Jan 16 01:09:15 mythtv kernel: ivtv: In case of problems please include the debug info between Jan 16 01:09:15 mythtv kernel: ivtv: the START INIT IVTV and END INIT IVTV lines, along with Jan 16 01:09:15 mythtv kernel: ivtv: any module options, when mailing the ivtv-users mailinglist. Jan 16 01:09:15 mythtv kernel: ivtv0: Autodetected Hauppauge card (cx23415 based) Jan 16 01:09:15 mythtv kernel: ivtv0: loaded v4l-cx2341x-enc.fw firmware (262144 bytes) Jan 16 01:09:15 mythtv kernel: ivtv0: loaded v4l-cx2341x-dec.fw firmware (262144 bytes) Jan 16 01:09:15 mythtv kernel: tuner 0-0043: chip found @ 0x86 (ivtv i2c driver #0) Jan 16 01:09:15 mythtv kernel: tuner 0-0061: chip found @ 0xc2 (ivtv i2c driver #0) Jan 16 01:09:15 mythtv kernel: msp3400 0-0040: MSP4448G-A2 found @ 0x80 (ivtv i2c driver #0) Jan 16 01:09:15 mythtv kernel: saa7115 0-0021: saa7115 found @ 0x42 (ivtv i2c driver #0) Jan 16 01:09:15 mythtv kernel: ivtv0: Autodetected Hauppauge WinTV PVR-350 Jan 16 01:09:15 mythtv kernel: saa7127 0-0044: saa7129 found @ 0x88 (ivtv i2c driver #0) Jan 16 01:09:15 mythtv kernel: ivtv0: Encoder revision: 0x02050032 Jan 16 01:09:15 mythtv kernel: ivtv0: Decoder revision: 0x02020023 Jan 16 01:09:15 mythtv kernel: ivtv0: Registered device video0 for encoder MPEG Jan 16 01:09:15 mythtv kernel: ivtv0: Registered device video32 for encoder YUV Jan 16 01:09:15 mythtv kernel: ivtv0: Registered device vbi0 for encoder VBI Jan 16 01:09:15 mythtv kernel: ivtv0: Registered device video24 for encoder PCM audio Jan 16 01:09:15 mythtv kernel: ivtv0: Registered device radio0 for encoder radio Jan 16 01:09:15 mythtv kernel: ivtv0: Registered device video16 for decoder MPEG Jan 16 01:09:15 mythtv kernel: ivtv0: Registered device vbi8 for decoder VBI Jan 16 01:09:15 mythtv kernel: ivtv0: Registered device vbi16 for decoder VOUT Jan 16 01:09:15 mythtv kernel: ivtv0: Registered device video48 for decoder YUV Jan 16 01:09:15 mythtv kernel: ivtv0: loaded v4l-cx2341x-init.mpg firmware (155648 bytes) Jan 16 01:09:15 mythtv kernel: ivtv0: Initialized Hauppauge WinTV PVR-350, card #0 Jan 16 01:09:15 mythtv kernel: ivtv: ==================== END INIT IVTV ==================== Jan 16 01:09:15 mythtv kernel: ivtv0-osd: Framebuffer module loaded (attached to ivtv card id 0) Jan 16 01:09:15 mythtv kernel: ivtv0-osd: screen coords: [0 0] -> [720 480] Jan 16 01:09:15 mythtv kernel: ivtv0-osd: original global alpha = 208 Jan 16 01:09:15 mythtv kernel: ivtv0-osd: current OSD state = 39 Jan 16 01:09:15 mythtv kernel: ivtv0-osd: new global alpha = 208 (1 255 0) Jan 16 01:09:15 mythtv kernel: ivtv0-osd: framebuffer at 0x45510000, mapped to 0xc9890000, size 1665k Jan 16 01:09:15 mythtv kernel: ivtv0-osd: mode is 720x480x32, linelength=2880 Jan 16 01:09:15 mythtv kernel: ivtv0-osd warning: ivtvfb_set_par Jan 16 01:09:15 mythtv kernel: ivtv0-osd: fb0: cx23415 TV out frame buffer device Jan 16 01:09:30 mythtv kernel: ivtv0-osd warning: ivtvfb_check_var Jan 16 01:09:31 mythtv kernel: ivtv0-osd warning: ivtvfb_check_var Jan 16 01:09:31 mythtv kernel: ivtv0-osd warning: ivtvfb_set_par --- Anybody have any troubleshooting ideas/tips? Thanks. -Mike [SOLUTION] - this turned out to be Xorg not liking 2:10:0 but liking 02:10:0 better. Also. i had some cabling issues which werent related to knoppmyth at all. |
|
| Author: | Krem1120 [ Tue Jan 16, 2007 11:08 am ] |
| Post subject: | |
I probably should have included my xorg.conf.. here it is.. ---root@mythtv:/var/log# cat /etc/X11/xorg.conf Section "ServerLayout" Identifier "XFree86 Configured" Screen 0 "TV Screen" 0 0 InputDevice "Keyboard0" "CoreKeyboard" # PS/2 Mouse not detected # Serial Mouse not detected InputDevice "USB Mouse" "CorePointer" EndSection Section "ServerFlags" Option "AllowMouseOpenFail" "true" EndSection Section "Files" RgbPath "/usr/share/X11/rgb" ModulePath "/usr/lib/xorg/modules" FontPath "/usr/share/fonts/X11/misc:unscaled" FontPath "/usr/share/fonts/X11/75dpi:unscaled" FontPath "/usr/share/fonts/X11/100dpi:unscaled" FontPath "/usr/share/fonts/X11/Type1" FontPath "/usr/share/fonts/X11/Speedo" FontPath "/usr/share/fonts/X11/PEX" # Additional fonts: Locale, Gimp, TTF... FontPath "/usr/share/fonts/X11/cyrillic" # FontPath "/usr/share/fonts/X11/latin2/75dpi" # FontPath "/usr/share/fonts/X11/latin2/100dpi" # True type and type1 fonts are also handled via xftlib, see /etc/X11/XftConfig! FontPath "/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType" FontPath "/usr/share/fonts/truetype" FontPath "/usr/share/fonts/latex-ttf-fonts" EndSection Section "Module" # Comments: see http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=346408 Load "dbe" # Double Buffering Extension, very important. Load "dri" # This shouldn't be available choice if user has selected driver vga, vesa or nv. Load "glx" # GLX Extension. Load "freetype" # Freetype fonts. Load "type1" # Type 1 fonts Load "record" # Developer extension, usually not needed # Load "extmod" # This is okay, but if you look into "man xorg.conf" you'll find option NOT to include DGA extension with extmod, and for a good reason.. DGA causes instability as it access videoram without consulting X about it. SubSection "extmod" Option "omit xfree86-dga" EndSubSection # Load "speedo" # Speedo fonts, this module doesn't exist in Xorg 7.0.17 # The following are deprecated/unstable/unneeded in Xorg 7.0 # Load "ddc" # ddc probing of monitor, this should be never present, as it gets automatically loaded. # Load "GLcore" # This should be never present, as it gets automatically loaded. # Load "bitmap" # Should be never present, as it gets automatically loaded. This is a font module, and loading it in xorg.conf makes X try to load it twice. EndSection Section "InputDevice" Identifier "Keyboard0" Driver "kbd" Option "CoreKeyboard" Option "XkbRules" "xorg" Option "XkbModel" "pc105" Option "XkbLayout" "us" EndSection Section "InputDevice" Identifier "Serial Mouse" Driver "mouse" Option "Protocol" "Microsoft" Option "Device" "/dev/ttyS0" Option "Emulate3Buttons" "true" Option "Emulate3Timeout" "70" Option "SendCoreEvents" "true" EndSection Section "InputDevice" Identifier "PS/2 Mouse" Driver "mouse" Option "Protocol" "auto" Option "ZAxisMapping" "4 5" Option "Device" "/dev/psaux" Option "Emulate3Buttons" "true" Option "Emulate3Timeout" "70" Option "SendCoreEvents" "true" EndSection Section "InputDevice" Identifier "USB Mouse" Driver "mouse" Option "Device" "/dev/input/mice" Option "SendCoreEvents" "true" Option "Protocol" "IMPS/2" Option "ZAxisMapping" "4 5" Option "Buttons" "5" EndSection # Auto-generated by KNOPPIX mkxf86config Section "Monitor" Identifier "NTSC Monitor" HorizSync 30-50 VertRefresh 50-120 Mode "720x480" # D: 34.563 MHz, H: 37.244 kHz, V: 73.897 Hz DotClock 34.564 HTimings 720 752 840 928 VTimings 480 484 488 504 Flags "-HSync" "-VSync" EndMode EndSection Section "Device" Identifier "Hauppauge PVR 350 iTVC15 Framebuffer" Driver "ivtvdev" ### change to whatever number you got in the previous section Option "fbdev" "/dev/fb0" Option "ivtvdev" "/dev/fb0" Option "VideoOverlay" "on" Option "XVideo" "1" ### change the busid to whatever is reported by lspci. Note that ### output of lspci is hex, so add a preceding "0x" to the BusID BusID "PCI:02:10:0" Screen 0 EndSection Section "Screen" Identifier "TV Screen" Device "Hauppauge PVR 350 iTVC15 Framebuffer" Monitor "NTSC Monitor" DefaultDepth 24 DefaultFbbpp 32 Subsection "Display" Depth 24 FbBpp 32 Modes "720x480" EndSubsection EndSection Section "DRI" Mode 0666 EndSection --- |
|
| Author: | crasarx [ Fri Feb 16, 2007 12:25 am ] |
| Post subject: | |
How did you solve this? I'm having the same problem |
|
| Author: | theseekeroftru7h [ Mon Feb 19, 2007 12:45 am ] |
| Post subject: | |
I'm also curious about this one, would love to know exactly how to set up the PVR-350 for S-video out. Any info would be helpful. Thanks
|
|
| Author: | bearntrail [ Tue Mar 13, 2007 9:38 pm ] |
| Post subject: | |
Same here. I'm getting the same problem. How did you solve it? My problem began after I successfully installed R5E50. While watching TV, the screen went to all green and I hit the reset button. Now I get: (EE) IVTVDEV_TST(0)Framebuffer id from dev /dev/fb0is 0 (EE) IVTVDEV_TST(0)open /dev/video48 returned 7 (EE) IVTVDEV_TST(0)get_fb returned 0 fbid 0 (EE) Failed to initialize GLX extension (Compatible NVIDIA X driver not found) Anyone have any suggestions? Ahh... per AdamC: ...because I'd setup the ip as 192.168.x.x, I have to update my /etc/hosts file so that mythtv was pointing at 192.168.x.x That did it! Thanks. |
|
| Page 1 of 1 | All times are UTC - 6 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|