novellahub wrote:
After reading some posts, it appears that I have a hardware failure. I am going to contact Hauppauge tech suport.
Hauppauge is letting me RMA my PVR-350. I am hoping they send out a replacement
| LinHES Forums http://forums.linhes.org/ |
|
| PVR-350 ivtv Problems -- SOLVED http://forums.linhes.org/viewtopic.php?f=2&t=17254 |
Page 1 of 1 |
| Author: | novellahub [ Wed Nov 14, 2007 6:59 pm ] |
| Post subject: | PVR-350 ivtv Problems -- SOLVED |
I am having trouble having IVTV loading firmware on my new PVR-350. I am wondering if I have a defective card. Here is some data from the log files: dmesg | egrep 'tv|12c|tuner|msp|saa|cx25|cx88|lirc' Quote: Linux version 2.6.18-chw-13 (root@mythtv) (gcc version 4.1.2 20061115 (prerelea$
ivtv: Start initialization, version 1.1.0 ivtv0: Initializing card #0 ivtv0: Autodetected Hauppauge card (cx23415 based) ivtv0: Unreasonably low latency timer, setting to 64 (was 32) ivtv0: YUV filter table not found in firmware. tuner 1-0043: chip found @ 0x86 (ivtv i2c driver #0) tda9887 1-0043: tda988[5/6/7] found @ 0x43 (tuner) tuner 1-0043: type set to tda9887 tuner 1-0061: chip found @ 0xc2 (ivtv i2c driver #0) msp3400 1-0040: MSP4448G-A2 found @ 0x80 (ivtv i2c driver #0) msp3400 1-0040: MSP4448G-A2 supports radio, mode is autodetect and autoselect saa7115 1-0021: saa7115 found (1f7115d0e100000) @ 0x42 (ivtv i2c driver #0) tveeprom 1-0050: Hauppauge model 48132, rev K168, serial# 7391318 tveeprom 1-0050: tuner model is LG TAPE H001F MK3 (idx 68, type 47) tveeprom 1-0050: TV standards NTSC(M) (eeprom 0x08) tveeprom 1-0050: audio processor is MSP4448 (idx 27) tveeprom 1-0050: decoder processor is SAA7115 (idx 19) tveeprom 1-0050: has radio, has IR receiver, has no IR transmitter tveeprom 1-0050: decoder processor is SAA7115 (idx 19) tveeprom 1-0050: has radio, has IR receiver, has no IR transmitter ivtv0: Autodetected Hauppauge WinTV PVR-350 saa7127 1-0044: saa7127 found @ 0x88 (ivtv i2c driver #0) tuner-simple 1-0061: type set to 47 (LG NTSC (TAPE series)) tuner 1-0061: type set to LG NTSC (TAPE series) ivtv0: Registered device video0 for encoder MPG (4096 kB) ivtv0: Registered device video32 for encoder YUV (2048 kB) ivtv0: Registered device vbi0 for encoder VBI (1024 kB) ivtv0: Registered device video24 for encoder PCM (320 kB) ivtv0: Registered device radio0 for encoder radio ivtv0: Registered device video16 for decoder MPG (1024 kB) ivtv0: Registered device vbi8 for decoder VBI (64 kB) ivtv0: Registered device vbi16 for decoder VOUT ivtv0: Registered device video48 for decoder YUV (1024 kB) ivtv0: Initialized card #0: Hauppauge WinTV PVR-350 ivtv: End initialization bttv: driver version 0.9.17 loaded bttv: using 8 buffers with 2080k (520 pages) each for capture bttv: driver version 0.9.17 loaded bttv: using 8 buffers with 2080k (520 pages) each for capture ir-kbd-i2c: i2c IR (Hauppauge) detected at i2c-1/1-0018/ir0 [ivtv i2c driver #0] saa7130/34: v4l2 driver version 0.2.14 loaded cx88/2: cx2388x MPEG-TS Driver Manager version 0.0.6 loaded cx88/2: cx2388x dvb driver version 0.0.6 loaded cx88/2: registering cx8802 driver, type: dvb access: shared lirc_dev: IR Remote Control driver registered, at major 61 cx88/0: cx2388x v4l2 driver version 0.0.6 loaded lirc_i2c: chip found @ 0x18 (Hauppauge IR) lirc_dev: lirc_register_plugin: sample_rate: 10 ivtv0: Loaded v4l-cx2341x-enc.fw firmware (376836 bytes) ivtv0: Loaded v4l-cx2341x-dec.fw firmware (262144 bytes) ivtv0: Encoder mailbox not found ivtv0: Retry loading firmware ivtv0: Loaded v4l-cx2341x-enc.fw firmware (376836 bytes) ivtv0: Loaded v4l-cx2341x-dec.fw firmware (262144 bytes) ivtv0: Encoder mailbox not found ivtv0: Failed to initialize on minor 224 ivtv0: Encoder mailbox not found ivtv0: Failed to initialize on minor 224 ivtv0: Failed to initialize on minor 240 ivtv0: Failed to initialize on minor 232 ivtv0: Failed to initialize on minor 0 ivtv0: Failed to initialize on minor 16 ivtv0: Failed to initialize on minor 24 ivtv0: Failed to initialize on minor 32 ivtv0: Failed to initialize on minor 48 ivtv0: Failed to initialize on minor 224 ivtv0: Failed to initialize on minor 240 ivtv0: Failed to initialize on minor 232 ivtv0: Failed to initialize on minor 0 ivtv0: Failed to initialize on minor 16 ivtv0: Failed to initialize on minor 24 ivtv0: Failed to initialize on minor 32 ivtv0: Failed to initialize on minor 48 ivtv0: Failed to initialize on minor 0 ivtv0: Failed to initialize on minor 224 ivtv0: Failed to initialize on minor 0 ivtv0: Failed to initialize on minor 224 ivtv0: Failed to initialize on minor 240 ivtv0: Failed to initialize on minor 232 ivtv0: Failed to initialize on minor 0 ivtv0: Failed to initialize on minor 16 ivtv0: Failed to initialize on minor 24 ivtv0: Failed to initialize on minor 32 ivtv0: Failed to initialize on minor 48 ivtv0: Failed to initialize on minor 224 ivtv0: Failed to initialize on minor 240 ivtv0: Failed to initialize on minor 232 ivtv0: Failed to initialize on minor 0 ivtv0: Failed to initialize on minor 16 ivtv0: Failed to initialize on minor 24 ivtv0: Failed to initialize on minor 32 ivtv0: Failed to initialize on minor 48 ivtv0: Failed to initialize on minor 0 Any ideas? I am testing out a card on a Intel 810 chipset board using a P4 1.7 Ghz processor. Also a AGP Nvidia 5200 Graphics card. I also tried this card on my production Knoppmyth box in my signature with no luck as well. Thanks, |
|
| Author: | tjc [ Wed Nov 14, 2007 8:36 pm ] |
| Post subject: | |
Everything looks fine up until it tries to load the firmware. Code: ivtv0: Loaded v4l-cx2341x-enc.fw firmware (376836 bytes)
ivtv0: Loaded v4l-cx2341x-dec.fw firmware (262144 bytes) ivtv0: Encoder mailbox not found ivtv0: Retry loading firmware ivtv0: Loaded v4l-cx2341x-enc.fw firmware (376836 bytes) ivtv0: Loaded v4l-cx2341x-dec.fw firmware (262144 bytes) ivtv0: Encoder mailbox not found ivtv0: Failed to initialize on minor 224 ivtv0: Encoder mailbox not found I'd head over the to ivtv mailing lists and search for the text of those messages. |
|
| Author: | novellahub [ Thu Nov 15, 2007 10:19 am ] |
| Post subject: | |
After reading some posts, it appears that I have a hardware failure. I am going to contact Hauppauge tech suport. |
|
| Author: | novellahub [ Fri Nov 16, 2007 5:25 am ] |
| Post subject: | |
novellahub wrote: After reading some posts, it appears that I have a hardware failure. I am going to contact Hauppauge tech suport.
Hauppauge is letting me RMA my PVR-350. I am hoping they send out a replacement
|
|
| Author: | novellahub [ Wed Dec 19, 2007 8:48 am ] |
| Post subject: | |
Just a update to this thread. I got a brand new replacement PVR-350 card and it works perfectly. |
|
| Page 1 of 1 | All times are UTC - 6 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|