LinHES Forums
http://forums.linhes.org/

ASUS P5K-V - Need USB Driver
http://forums.linhes.org/viewtopic.php?f=2&t=17284		 Page 1 of 1
Author:  BluesBrian [ Mon Nov 19, 2007 8:48 am ]
Post subject:  ASUS P5K-V - Need USB Driver
USB is not working on this ASUS motherboard.. Here's results of lspci:
Quote:
00:00.0 Host bridge: Intel Corporation Unknown device 29c0 (rev 02)
00:02.0 VGA compatible controller: Intel Corporation Unknown device 29c2 (rev 02)
00:02.1 Display controller: Intel Corporation Unknown device 29c3 (rev 02)
00:1a.0 USB Controller: Intel Corporation Unknown device 2937 (rev 02)
00:1a.1 USB Controller: Intel Corporation Unknown device 2938 (rev 02)
00:1a.2 USB Controller: Intel Corporation Unknown device 2939 (rev 02)
00:1a.7 USB Controller: Intel Corporation Unknown device 293c (rev 02)
00:1b.0 Audio device: Intel Corporation Unknown device 293e (rev 02)
00:1c.0 PCI bridge: Intel Corporation Unknown device 2940 (rev 02)
00:1c.4 PCI bridge: Intel Corporation Unknown device 2948 (rev 02)
00:1c.5 PCI bridge: Intel Corporation Unknown device 294a (rev 02)
00:1d.0 USB Controller: Intel Corporation Unknown device 2934 (rev 02)
00:1d.1 USB Controller: Intel Corporation Unknown device 2935 (rev 02)
00:1d.2 USB Controller: Intel Corporation Unknown device 2936 (rev 02)
00:1d.7 USB Controller: Intel Corporation Unknown device 293a (rev 02)
00:1e.0 PCI bridge: Intel Corporation 82801 PCI Bridge (rev 92)
00:1f.0 ISA bridge: Intel Corporation Unknown device 2918 (rev 02)
00:1f.2 IDE interface: Intel Corporation Unknown device 2921 (rev 02)
00:1f.3 SMBus: Intel Corporation Unknown device 2930 (rev 02)
00:1f.5 IDE interface: Intel Corporation Unknown device 2926 (rev 02)
01:00.0 Ethernet controller: Attansic Technology Corp. L1 Gigabit Ethernet Adapter (rev b0)
02:00.0 IDE interface: JMicron Technologies, Inc. JMicron 20360/20363 AHCI Controller (rev 03)
02:00.1 IDE interface: JMicron Technologies, Inc. JMicron 20360/20363 AHCI Controller (rev 03)
04:00.0 Multimedia video controller: Internext Compression Inc iTVC15 MPEG-2 Encoder (rev 01)

Any Suggestions? Thanks!
http://usa.asus.com/products.aspx?l1=3&l2=11&l3=542&l4=0&model=1652&modelmenu=1
Intel LGA775 Platform
Intel® G33 chipset
3 x PCI slots
2 x PCI-E x16 slots
1 x PCI-E x1 slots

I did find this info on the G33 chipset:
http://gentoo-wiki.com/HARDWARE_Intel_G33,_Q35,_and_Q33_Chipsets#BIOS_settings
Author:  mac [ Fri Nov 23, 2007 8:31 pm ]
Post subject: 
Strange. What version of knoppmyth are using?
USB is not your only issue, look at all of the other "Unknown device" 's in lspci.

Grab a ubuntu 7.10 live CD and see how you lspci looks. If everything shows up correctly, you might want go through task up of upgrading to more recent kernel -- but from what I understand -- doing this with R5F27 is non-trival -- at least for me. I tried and turned back because the changes with regard to ivtv between 2.6.16 and more recent kernels.. This gave me more possible issues than I wanted to think about -- as it related to how the pieces fit together in knoppmyth. This tight integration usualy a very good thing..
Author:  BluesBrian [ Sat Nov 24, 2007 12:42 am ]
Post subject: 
mac wrote:
Strange. What version of knoppmyth are using?

R5F27
mac wrote:
USB is not your only issue, look at all of the other "Unknown device" 's in lspci.

The only card that I've got plugged in is the PVR-350. I had a D-Link NIC card in initially, but I got the drivers for the onboard network chip going, so I pulled that card.
mac wrote:
Grab a ubuntu 7.10 live CD and see how you lspci looks.

I''ll give that a run!
mac wrote:
..might want go through task up of upgrading to more recent kernel.. non-trival

Yeah, I kinda figured that! With that case, I might just wait for the next KM version! :lol: I'll have to figure out what else isn't working before going drastic measures! The "basic" functionality is working, so I'm not desperate! .. although, being able to "sneakernet" a 500 GB USB drive would be cool! :twisted: (this is my second KM box.. both are running independent backends)
Page 1 of 1 All times are UTC - 6 hours
Powered by phpBB® Forum Software © phpBB Group
http://www.phpbb.com/