| LinHES Forums http://forums.linhes.org/ |
|
| ATI S-video to projector doesn't work http://forums.linhes.org/viewtopic.php?f=2&t=17746 |
Page 1 of 1 |
| Author: | roofchop [ Sun Jan 27, 2008 9:24 pm ] |
| Post subject: | ATI S-video to projector doesn't work |
Hey everyone, first off a big thanks to all the developers, I just installed KnoppMyth this weekend and everything went really well. I am trying to run my InFocus IN72 Projector (Native: 854 x 480 Max: 1024x768 resolution, 31.5 - 80kHz horizontal and 50 - 85Hz vertical) from the S-Video out on my ATI Radeon 9250 (AGP) video card. I was hoping that it would just work, so I shut it down plugged it in and reboot. Everything was good through to the end of the splash screen then the projector display went "garbled". I tried removing all the resolutions in the xorg.conf that I didn't think the projector could handle. But no luck. Maybe I missed one, or is there something else I am missing. I have been a linux user for about a year and a half, but this is the first time running without a desktop environment. I like it, but it seems there are a lot of simple things I have trouble doing (ie. determine current resolution and settings). Thanks, Josh |
|
| Author: | tjc [ Sun Jan 27, 2008 10:37 pm ] |
| Post subject: | |
See the troubleshooting pages on the wiki. Especially the "CheckingLogFiles" page for details on how to increase the verbosity to figure out what the X server is doing. |
|
| Author: | roofchop [ Fri Feb 08, 2008 5:03 pm ] |
| Post subject: | |
OK, I finally got a chance to do a little work on the Knoppmyth box tonight. I still can't get the S-video to work past the splash screen and I would really like to get it figured out. I will continue researching this problem and a few others I am having tonight, but so direction would be appreciated. Here is the output of /var/log/dmesg Code: Linux version 2.6.18-chw-13 (root@mythtv) (gcc version 4.1.2 20061115 (prerelease) (Debian 4.1.1-21)) #1 SMP PREEMPT Sat Jun 2 21:06:06 PDT 2007 BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 000000000009fc00 (usable) BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved) BIOS-e820: 00000000000e8000 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 000000001ff30000 (usable) BIOS-e820: 000000001ff30000 - 000000001ff40000 (ACPI data) BIOS-e820: 000000001ff40000 - 000000001fff0000 (ACPI NVS) BIOS-e820: 000000001fff0000 - 0000000020000000 (reserved) BIOS-e820: 00000000ffb80000 - 0000000100000000 (reserved) 0MB HIGHMEM available. 511MB LOWMEM available. found SMP MP-table at 000ff780 On node 0 totalpages: 130864 DMA zone: 4096 pages, LIFO batch:0 Normal zone: 126768 pages, LIFO batch:31 DMI 2.3 present. ACPI: RSDP (v000 ACPIAM ) @ 0x000f9f70 ACPI: RSDT (v001 A M I OEMRSDT 0x07000301 MSFT 0x00000097) @ 0x1ff30000 ACPI: FADT (v001 A M I OEMFACP 0x07000301 MSFT 0x00000097) @ 0x1ff30200 ACPI: MADT (v001 A M I OEMAPIC 0x07000301 MSFT 0x00000097) @ 0x1ff30390 ACPI: OEMB (v001 A M I OEMBIOS 0x07000301 MSFT 0x00000097) @ 0x1ff40040 ACPI: DSDT (v001 PPVM1 PPVM1701 0x00000701 INTL 0x02002026) @ 0x00000000 ACPI: PM-Timer IO Port: 0x808 ACPI: Local APIC address 0xfee00000 ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) Processor #0 15:2 APIC version 20 ACPI: LAPIC (acpi_id[0x02] lapic_id[0x81] disabled) ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0]) IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-23 ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) ACPI: IRQ0 used by override. ACPI: IRQ2 used by override. ACPI: IRQ9 used by override. Enabling APIC mode: Flat. Using 1 I/O APICs Using ACPI (MADT) for SMP configuration information Allocating PCI resources starting at 30000000 (gap: 20000000:dfb80000) Detected 1995.121 MHz processor. Built 1 zonelists. Total pages: 130864 Kernel command line: auto BOOT_IMAGE=Linux ro root=301 splash=silent apm=power-off nomce quiet bootsplash: silent mode. mapped APIC to ffffd000 (fee00000) mapped IOAPIC to ffffc000 (fec00000) Enabling fast FPU save and restore... done. Enabling unmasked SIMD FPU exception support... done. Initializing CPU#0 PID hash table entries: 2048 (order: 11, 8192 bytes) Console: colour dummy device 80x25 Dentry cache hash table entries: 65536 (order: 6, 262144 bytes) Inode-cache hash table entries: 32768 (order: 5, 131072 bytes) Memory: 512076k/523456k available (4246k kernel code, 10864k reserved, 1325k data, 268k init, 0k highmem) Checking if this processor honours the WP bit even in supervisor mode... Ok. Calibrating delay using timer specific routine.. 3992.28 BogoMIPS (lpj=1996144) Security Framework v1.0.0 initialized Capability LSM initialized Mount-cache hash table entries: 512 CPU: After generic identify, caps: bfebfbff 00000000 00000000 00000000 00004400 00000000 00000000 CPU: After vendor identify, caps: bfebfbff 00000000 00000000 00000000 00004400 00000000 00000000 CPU: Trace cache: 12K uops, L1 D cache: 8K CPU: L2 cache: 128K CPU: Hyper-Threading is disabled CPU: After all inits, caps: bfebfbff 00000000 00000000 00000080 00004400 00000000 00000000 Compat vDSO mapped to ffffe000. Checking 'hlt' instruction... OK. SMP alternatives: switching to UP code Freeing SMP alternatives: 20k freed ACPI: Core revision 20060707 CPU0: Intel(R) Celeron(R) CPU 2.00GHz stepping 09 Total of 1 processors activated (3992.28 BogoMIPS). ENABLING IO-APIC IRQs ..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1 Brought up 1 CPUs migration_cost=0 checking if image is initramfs...it isn't (no cpio magic); looks like an initrd Freeing initrd memory: 111k freed NET: Registered protocol family 16 ACPI: bus type pci registered PCI: PCI BIOS revision 2.10 entry at 0xf0031, last bus=2 PCI: Using configuration type 1 Setting up standard PCI resources ACPI: Interpreter enabled ACPI: Using IOAPIC for interrupt routing ACPI: PCI Root Bridge [PCI0] (0000:00) PCI: Probing PCI hardware (bus 00) PCI quirk: region 0800-087f claimed by ICH4 ACPI/GPIO/TCO PCI quirk: region 0480-04bf claimed by ICH4 GPIO PCI: Ignoring BAR0-3 of IDE controller 0000:00:1f.1 Boot video device is 0000:01:00.0 PCI: Firmware left 0000:02:08.0 e100 interrupts enabled, disabling PCI: Transparent bridge - 0000:00:1e.0 ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P4._PRT] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 *10 11 12 14 15) ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 10 *11 12 14 15) ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 *5 6 7 10 11 12 14 15) ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 *5 6 7 10 11 12 14 15) ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 *5 6 7 10 11 12 14 15) ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 *5 6 7 10 11 12 14 15) ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled. ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 10 *11 12 14 15) Linux Plug and Play Support v0.97 (c) Adam Belay pnp: PnP ACPI init pnp: PnP ACPI: found 12 devices PnPBIOS: Disabled by ACPI PNP intel_rng: FWH not detected SCSI subsystem initialized PCI: Using ACPI for IRQ routing PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report pnp: 00:08: ioport range 0x680-0x6ff has been reserved pnp: 00:08: ioport range 0x290-0x297 has been reserved PCI: Bridge: 0000:00:01.0 IO window: c000-cfff MEM window: fe900000-fe9fffff PREFETCH window: d3f00000-f3efffff PCI: Bridge: 0000:00:1e.0 IO window: d000-dfff MEM window: fea00000-feafffff PREFETCH window: f3f00000-fbefffff PCI: Setting latency timer of device 0000:00:1e.0 to 64 NET: Registered protocol family 2 IP route cache hash table entries: 4096 (order: 2, 16384 bytes) TCP established hash table entries: 16384 (order: 5, 196608 bytes) TCP bind hash table entries: 8192 (order: 4, 98304 bytes) TCP: Hash tables configured (established 16384 bind 8192) TCP reno registered audit: initializing netlink socket (disabled) audit(1202103162.497:1): initialized Total HugeTLB memory allocated, 0 VFS: Disk quotas dquot_6.5.1 Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) JFS: nTxBlock = 4002, nTxLock = 32021 SGI XFS with ACLs, security attributes, realtime, large block numbers, no debug enabled SGI XFS Quota Management subsystem Initializing Cryptographic API io scheduler noop registered io scheduler anticipatory registered io scheduler deadline registered (default) io scheduler cfq registered 0000:00:1d.7 EHCI: BIOS handoff failed (BIOS bug ?) 01010001 vesafb: framebuffer at 0xe8000000, mapped to 0xe0a80000, using 3750k, total 16384k vesafb: mode is 800x600x16, linelength=1600, pages=16 vesafb: protected mode interface info at c000:576b vesafb: pmi: set display start = c00c57ff, set palette = c00c584b vesafb: pmi: ports = c010 c016 c054 c038 c03c c05c c000 c004 c0b0 c0b2 c0b4 vesafb: scrolling: redraw vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0 bootsplash 3.1.6-2004/03/31: looking for picture...<6> silentjpeg size 45842 bytes,<6>...found (800x600, 21500 bytes, v3). Console: switching to colour frame buffer device 75x24 fb0: VESA VGA frame buffer device isapnp: Scanning for PnP cards... isapnp: No Plug & Play device found Real Time Clock Driver v1.12ac floppy0: no floppy controllers found RAMDISK driver initialized: 16 RAM disks of 4096K size 1024 blocksize loop: loaded (max 8 devices) Intel(R) PRO/1000 Network Driver - version 7.1.9-k4 Copyright (c) 1999-2006 Intel Corporation. pcnet32.c:v1.32 18.Mar.2006 tsbogend@alpha.franken.de eepro100.c:v1.09j-t 9/29/99 Donald Becker http://www.scyld.com/network/eepro100.html eepro100.c: $Revision: 1.36 $ 2000/11/17 Modified by Andrey V. Savochkin <saw@saw.sw.com.sg> and others ACPI: PCI Interrupt 0000:02:08.0[A] -> GSI 20 (level, low) -> IRQ 16 eth0: 0000:02:08.0, 00:0E:A6:07:50:E0, IRQ 16. Board assembly 000000-000, Physical connectors present: RJ45 Primary interface chip i82555 PHY #1. General self-test: passed. Serial sub-system self-test: passed. Internal registers self-test: passed. ROM checksum self-test: passed (0xed626fe2). e100: Intel(R) PRO/100 Network Driver, 3.5.10-k2-NAPI e100: Copyright(c) 1999-2005 Intel Corporation ns83820.c: National Semiconductor DP83820 10/100/1000 driver. forcedeth.c: Reverse Engineered nForce ethernet driver. Version 0.56. dmfe: Davicom DM9xxx net driver, version 1.36.4 (2002-01-17) winbond-840.c:v1.01-d (2.4 port) Nov-17-2001 Donald Becker <becker@scyld.com> http://www.scyld.com/network/drivers.html uli526x: ULi M5261/M5263 net driver, version 0.9.3 (2005-7-29) Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx ICH5: IDE controller at PCI slot 0000:00:1f.1 PCI: Enabling device 0000:00:1f.1 (0005 -> 0007) ACPI: PCI Interrupt 0000:00:1f.1[A] -> GSI 18 (level, low) -> IRQ 17 ICH5: chipset revision 2 ICH5: not 100% native mode: will probe irqs later ide0: BM-DMA at 0xfc00-0xfc07, BIOS settings: hda:DMA, hdb:pio ide1: BM-DMA at 0xfc08-0xfc0f, BIOS settings: hdc:pio, hdd:DMA Probing IDE interface ide0... hda: WDC WD2500JB-98GVA0, ATA DISK drive ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 Probing IDE interface ide1... hdd: LITE-ON DVDRW SHM-165H6S, ATAPI CD/DVD-ROM drive ide1 at 0x170-0x177,0x376 on irq 15 hda: max request size: 512KiB hda: 488397168 sectors (250059 MB) w/8192KiB Cache, CHS=30401/255/63, UDMA(100) hda: cache flushes supported hda: hda1 hda2 hda3 hdd: ATAPI 48X DVD-ROM DVD-R-RAM CD-R/RW drive, 2048kB Cache, UDMA(66) Uniform CD-ROM driver Revision: 3.20 Loading iSCSI transport class v1.1-646.<7>libata version 2.00 loaded. ata_piix 0000:00:1f.2: version 2.00 ata_piix 0000:00:1f.2: MAP [ P0 -- P1 -- ] ACPI: PCI Interrupt 0000:00:1f.2[A] -> GSI 18 (level, low) -> IRQ 17 PCI: Setting latency timer of device 0000:00:1f.2 to 64 ata1: SATA max UDMA/133 cmd 0xEFE0 ctl 0xEFAE bmdma 0xEF60 irq 17 ata2: SATA max UDMA/133 cmd 0xEFA0 ctl 0xEFAA bmdma 0xEF68 irq 17 scsi0 : ata_piix ata1.00: ATA-6, max UDMA/133, 234441648 sectors: LBA ata1.00: ata1: dev 0 multi count 16 ata1.00: applying bridge limits ata1.00: configured for UDMA/100 scsi1 : ata_piix ATA: abnormal status 0x7F on port 0xEFA7 Vendor: ATA Model: ST3120023AS Rev: 3.01 Type: Direct-Access ANSI SCSI revision: 05 SCSI device sda: 234441648 512-byte hdwr sectors (120034 MB) sda: Write Protect is off sda: Mode Sense: 00 3a 00 00 SCSI device sda: drive cache: write back SCSI device sda: 234441648 512-byte hdwr sectors (120034 MB) sda: Write Protect is off sda: Mode Sense: 00 3a 00 00 SCSI device sda: drive cache: write back sda: sda1 sda2 < sda5 > sd 0:0:0:0: Attached scsi disk sda PNP: No PS/2 controller found. Probing ports directly. serio: i8042 AUX port at 0x60,0x64 irq 12 serio: i8042 KBD port at 0x60,0x64 irq 1 mice: PS/2 mouse device common for all mice md: linear personality registered for level -1 md: raid0 personality registered for level 0 md: raid1 personality registered for level 1 raid6: int32x1 519 MB/s raid6: int32x2 527 MB/s raid6: int32x4 421 MB/s raid6: int32x8 472 MB/s raid6: mmxx1 1527 MB/s raid6: mmxx2 2019 MB/s raid6: sse1x1 882 MB/s raid6: sse1x2 1769 MB/s raid6: sse2x1 1625 MB/s raid6: sse2x2 2226 MB/s raid6: using algorithm sse2x2 (2226 MB/s) md: raid6 personality registered for level 6 md: raid5 personality registered for level 5 md: raid4 personality registered for level 4 raid5: automatically using best checksumming function: pIII_sse pIII_sse : 2532.000 MB/sec raid5: using function: pIII_sse (2532.000 MB/sec) md: md driver 0.90.3 MAX_MD_DEVS=256, MD_SB_DISKS=27 md: bitmap version 4.39 device-mapper: ioctl: 4.7.0-ioctl (2006-06-24) initialised: dm-devel@redhat.com NET: Registered protocol family 1 NET: Registered protocol family 15 Using IPI No-Shortcut mode ACPI: (supports S0 S1 S3 S4 S5) md: Autodetecting RAID arrays. md: autorun ... md: ... autorun DONE. Time: tsc clocksource has been installed. RAMDISK: Compressed image found at block 0 VFS: Mounted root (ext2 filesystem). (fs/jbd/recovery.c, 255): journal_recover: JBD: recovery, exit status 0, recovered transactions 133335 to 134011 (fs/jbd/recovery.c, 257): journal_recover: JBD: Replayed 2999 and revoked 0/4 blocks kjournald starting. Commit interval 5 seconds EXT3 FS on hda1, internal journal EXT3-fs: recovery complete. EXT3-fs: mounted filesystem with ordered data mode. Freeing unused kernel memory: 268k freed Linux agpgart interface v0.101 (c) Dave Jones agpgart: Detected an Intel 865 Chipset. agpgart: AGP aperture is 32M @ 0xfc000000 pci_hotplug: PCI Hot Plug PCI Core version: 0.5 shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 usbcore: registered new driver usbfs usbcore: registered new driver hub USB Universal Host Controller Interface driver v3.0 ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 16 (level, low) -> IRQ 18 PCI: Setting latency timer of device 0000:00:1d.0 to 64 uhci_hcd 0000:00:1d.0: UHCI Host Controller uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1 uhci_hcd 0000:00:1d.0: irq 18, io base 0x0000ef00 usb usb1: configuration #1 chosen from 1 choice hub 1-0:1.0: USB hub found hub 1-0:1.0: 2 ports detected ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 19 (level, low) -> IRQ 19 PCI: Setting latency timer of device 0000:00:1d.1 to 64 uhci_hcd 0000:00:1d.1: UHCI Host Controller uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 2 uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000ef20 usb usb2: configuration #1 chosen from 1 choice hub 2-0:1.0: USB hub found hub 2-0:1.0: 2 ports detected ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 17 PCI: Setting latency timer of device 0000:00:1d.2 to 64 uhci_hcd 0000:00:1d.2: UHCI Host Controller uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 3 uhci_hcd 0000:00:1d.2: irq 17, io base 0x0000ef40 usb usb3: configuration #1 chosen from 1 choice hub 3-0:1.0: USB hub found hub 3-0:1.0: 2 ports detected ACPI: PCI Interrupt 0000:00:1d.3[A] -> GSI 16 (level, low) -> IRQ 18 PCI: Setting latency timer of device 0000:00:1d.3 to 64 uhci_hcd 0000:00:1d.3: UHCI Host Controller uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 4 uhci_hcd 0000:00:1d.3: irq 18, io base 0x0000ef80 usb usb4: configuration #1 chosen from 1 choice hub 4-0:1.0: USB hub found hub 4-0:1.0: 2 ports detected usb 1-2: new low speed USB device using uhci_hcd and address 2 ACPI: PCI Interrupt 0000:00:1f.5[B] -> GSI 17 (level, low) -> IRQ 20 PCI: Setting latency timer of device 0000:00:1f.5 to 64 usb 1-2: configuration #1 chosen from 1 choice Linux video capture interface: v2.00 ivtv: Start initialization, version 1.1.0 usb 2-1: new low speed USB device using uhci_hcd and address 2 Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing disabled serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A 00:05: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A 00:06: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A ALSA /usr/src/modules/alsa-driver/pci/ac97/ac97_codec.c:2104: AC'97 0 analog subsections not ready intel8x0_measure_ac97_clock: measured 50885 usecs intel8x0: clocking to 48000 ACPI: PCI Interrupt 0000:00:1d.7[D] -> GSI 23 (level, low) -> IRQ 21 PCI: Setting latency timer of device 0000:00:1d.7 to 64 ehci_hcd 0000:00:1d.7: EHCI Host Controller ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 5 ehci_hcd 0000:00:1d.7: debug port 1 PCI: cache line size of 128 is not supported by device 0000:00:1d.7 ehci_hcd 0000:00:1d.7: irq 21, io mem 0xfebffc00 usb 2-1: configuration #1 chosen from 1 choice ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 usb usb5: configuration #1 chosen from 1 choice hub 5-0:1.0: USB hub found hub 5-0:1.0: 8 ports detected usb 2-1: can't set config #1, error -71 ACPI: PCI Interrupt 0000:00:1f.3[B] -> GSI 17 (level, low) -> IRQ 20 ivtv0: Initializing card #0 ivtv0: Autodetected Hauppauge card (cx23416 based) ACPI: PCI Interrupt 0000:02:0a.0[A] -> GSI 21 (level, low) -> IRQ 22 tuner 1-0043: chip found @ 0x86 (ivtv i2c driver #0) tda9887 1-0043: tda988[5/6/7] found @ 0x43 (tuner) tuner 1-0043: type set to tda9887 usb 1-2: USB disconnect, address 2 tuner 1-0061: chip found @ 0xc2 (ivtv i2c driver #0) tveeprom 1-0050: Hauppauge model 26552, rev C258, serial# 7529772 tveeprom 1-0050: tuner model is Philips FM1236 MK3 (idx 58, type 43) tveeprom 1-0050: TV standards NTSC(M) (eeprom 0x08) tveeprom 1-0050: audio processor is CX25843 (idx 37) tveeprom 1-0050: decoder processor is CX25843 (idx 30) tveeprom 1-0050: has radio, has no IR receiver, has no IR transmitter ivtv0: Autodetected Hauppauge WinTV PVR-150 cx25840 1-0044: cx25843-23 found @ 0x88 (ivtv i2c driver #0) wm8775 1-001b: chip found @ 0x36 (ivtv i2c driver #0) tuner-simple 1-0061: type set to 43 (Philips NTSC MK3 (FM1236MK3 or FM1236/F)) tuner 1-0061: type set to Philips NTSC MK3 (FM1236MK3 or FM1236/F) ivtv0: Registered device video0 for encoder MPG (4096 kB) ivtv0: Registered device video32 for encoder YUV (2048 kB) ivtv0: Registered device vbi0 for encoder VBI (1024 kB) ivtv0: Registered device video24 for encoder PCM (320 kB) ivtv0: Registered device radio0 for encoder radio ivtv0: Initialized card #0: Hauppauge WinTV PVR-150 ivtv: End initialization usb 2-1: USB disconnect, address 2 parport: PnPBIOS parport detected. parport0: PC-style at 0x378 (0x778), irq 7, dma 3 [PCSPP,TRISTATE,COMPAT,EPP,ECP,DMA] usbcore: registered new driver hiddev usb 1-2: new low speed USB device using uhci_hcd and address 3 usb 1-2: configuration #1 chosen from 1 choice usb 2-1: new low speed USB device using uhci_hcd and address 3 usb 2-1: configuration #1 chosen from 1 choice usb 2-2: new full speed USB device using uhci_hcd and address 4 usb 2-2: configuration #1 chosen from 1 choice lirc_dev: IR Remote Control driver registered, at major 61 lirc_mceusb2: Philips eHome USB IR Transciever and Microsoft MCE 2005 Remote Control driver for LIRC $Revision: 1.25 $ lirc_mceusb2: Daniel Melander <lirc@rajidae.se>, Martin Blatter <martin_a_blatter@yahoo.com> usb 4-2: new low speed USB device using uhci_hcd and address 2 usb 4-2: configuration #1 chosen from 1 choice input: Microsoft Microsoft Wireless Optical Mouse® 1.0A as /class/input/input0 input: USB HID v1.11 Mouse [Microsoft Microsoft Wireless Optical Mouse® 1.0A] on usb-0000:00:1d.0-2 /usr/src/lirc-0.8.2-CVS-pvr150/drivers/lirc_imon/lirc_imon.c: Driver for Soundgraph iMON MultiMedian IR/VFD, v0.3 /usr/src/lirc-0.8.2-CVS-pvr150/drivers/lirc_imon/lirc_imon.c: Venky Raju <dev@venky.ws> input: USBPS2 as /class/input/input1 input: USB HID v1.00 Keyboard [USBPS2] on usb-0000:00:1d.1-1 input: USBPS2 as /class/input/input2 input: USB HID v1.00 Mouse [USBPS2] on usb-0000:00:1d.1-1 usb 2-2: reset full speed USB device using uhci_hcd and address 4 lirc_dev: lirc_register_plugin: sample_rate: 0 lirc_mceusb2[4]: Philips eHome Infrared Transceiver on usb2:4 usbcore: registered new driver lirc_mceusb2 /usr/src/lirc-0.8.2-CVS-pvr150/drivers/lirc_imon/lirc_imon.c: imon_probe: found IMON device lirc_dev: lirc_register_plugin: sample_rate: 0 /usr/src/lirc-0.8.2-CVS-pvr150/drivers/lirc_imon/lirc_imon.c: imon_probe: Registered iMON plugin (minor:1) /usr/src/lirc-0.8.2-CVS-pvr150/drivers/lirc_imon/lirc_imon.c: imon_probe: iMON device on usb<4:2> initialized usbcore: registered new driver lirc_imon usbcore: registered new driver usbhid drivers/usb/input/hid-core.c: v2.6:USB HID core driver ts: Compaq touchscreen protocol output Adding 779144k swap on /dev/hda2. Priority:-1 extents:1 across:779144k EXT3 FS on hda1, internal journal bttv: driver version 0.9.17 loaded bttv: using 8 buffers with 2080k (520 pages) each for capture bt878: AUDIO driver version 0.0.0 loaded Non-volatile memory driver v1.2 saa7130/34: v4l2 driver version 0.2.14 loaded cx88/2: cx2388x MPEG-TS Driver Manager version 0.0.6 loaded cx88/2: cx2388x dvb driver version 0.0.6 loaded cx88/2: registering cx8802 driver, type: dvb access: shared ohci_hcd: 2005 April 22 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI) Initializing USB Mass Storage driver... usbcore: registered new driver usb-storage USB Mass Storage support registered. ieee1394: Initialized config rom entry `ip1394' ieee1394: sbp2: Driver forced to serialize I/O (serialize_io=1) ieee1394: sbp2: Try serialize_io=0 for better performance Registering unionfs 20061031-1310 unionfs: debugging is not enabled ACPI: Power Button (FF) [PWRF] ACPI: Power Button (CM) [PWRB] ACPI Exception (acpi_processor-0681): AE_NOT_FOUND, Processor Device is not present [20060707] ACPI: Getting cpuindex for acpiid 0x2 fuse init (API version 7.7) NET: Registered protocol family 17 NET: Registered protocol family 10 lo: Disabled Privacy Extensions IPv6 over IPv4 tunneling driver kjournald starting. Commit interval 5 seconds EXT3 FS on hda3, internal journal EXT3-fs: mounted filesystem with ordered data mode. and my current xorg.conf Code: Section "ServerLayout"
Identifier "XFree86 Configured" Screen 0 "Screen0" 0 0 InputDevice "Keyboard0" "CoreKeyboard" # PS/2 Mouse not detected # Serial Mouse not detected InputDevice "USB Mouse" "CorePointer" EndSection Section "ServerFlags" Option "AllowMouseOpenFail" "true" EndSection Section "Files" RgbPath "/usr/share/X11/rgb" ModulePath "/usr/lib/xorg/modules" FontPath "/usr/share/fonts/X11/misc:unscaled" FontPath "/usr/share/fonts/X11/75dpi:unscaled" FontPath "/usr/share/fonts/X11/100dpi:unscaled" FontPath "/usr/share/fonts/X11/Type1" FontPath "/usr/share/fonts/X11/Speedo" FontPath "/usr/share/fonts/X11/PEX" # Additional fonts: Locale, Gimp, TTF... FontPath "/usr/share/fonts/X11/cyrillic" # FontPath "/usr/share/fonts/X11/latin2/75dpi" # FontPath "/usr/share/fonts/X11/latin2/100dpi" # True type and type1 fonts are also handled via xftlib, see /etc/X11/XftConfig! FontPath "/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType" FontPath "/usr/share/fonts/truetype" FontPath "/usr/share/fonts/latex-ttf-fonts" EndSection Section "Module" # Comments: see http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=346408 Load "dbe" # Double Buffering Extension, very important. Load "dri" # This shouldn't be available choice if user has selected driver vga, vesa or nv. Load "glx" # GLX Extension. Load "freetype" # Freetype fonts. Load "type1" # Type 1 fonts Load "record" # Developer extension, usually not needed # Load "extmod" # This is okay, but if you look into "man xorg.conf" you'll find option NOT to include DGA extension with extmod, and for a good reason.. DGA causes instability as it access videoram without consulting X about it. SubSection "extmod" Option "omit xfree86-dga" EndSubSection # Load "speedo" # Speedo fonts, this module doesn't exist in Xorg 7.0.17 # The following are deprecated/unstable/unneeded in Xorg 7.0 # Load "ddc" # ddc probing of monitor, this should be never present, as it gets automatically loaded. # Load "GLcore" # This should be never present, as it gets automatically loaded. # Load "bitmap" # Should be never present, as it gets automatically loaded. This is a font module, and loading it in xorg.conf makes X try to load it twice. EndSection Section "InputDevice" Identifier "Keyboard0" Driver "kbd" Option "CoreKeyboard" Option "XkbRules" "xorg" Option "XkbModel" "pc105" Option "XkbLayout" "us" EndSection Section "InputDevice" Identifier "Serial Mouse" Driver "mouse" Option "Protocol" "Microsoft" Option "Device" "/dev/ttyS0" Option "Emulate3Buttons" "true" Option "Emulate3Timeout" "70" Option "SendCoreEvents" "true" EndSection Section "InputDevice" Identifier "PS/2 Mouse" Driver "mouse" Option "Protocol" "auto" Option "ZAxisMapping" "4 5" Option "Device" "/dev/psaux" Option "Emulate3Buttons" "true" Option "Emulate3Timeout" "70" Option "SendCoreEvents" "true" EndSection Section "InputDevice" Identifier "USB Mouse" Driver "mouse" Option "Device" "/dev/input/mice" Option "SendCoreEvents" "true" Option "Protocol" "IMPS/2" Option "ZAxisMapping" "4 5" Option "Buttons" "5" EndSection # Auto-generated by KNOPPIX mkxf86config Section "Monitor" Identifier "Monitor0" Option "DPMS" "true" VendorName "SAM" ModelName "SAM0254" HorizSync 30 - 81 # DDC-probed VertRefresh 56 - 75 # DDC-probed # These are the DDC-probed settings reported by your monitor. # 1280x1024, 75.0Hz; hfreq=79.98, vfreq=75.03 #ModeLine "1280x1024" 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync # 1152x864, 75.0Hz; hfreq=67.50, vfreq=75.00 #ModeLine "1152x864" 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync # 1024x768, 75.0Hz; hfreq=60.02, vfreq=75.03 #ModeLine "1024x768" 78.75 1024 1040 1136 1312 768 769 772 800 +hsync +vsync # 1024x768, 70.0Hz; hfreq=56.48, vfreq=70.07 ModeLine "1024x768" 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync # 800x600, 75.0Hz; hfreq=46.88, vfreq=75.00 ModeLine "800x600" 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync # 800x600, 72.0Hz; hfreq=48.08, vfreq=72.19 ModeLine "800x600" 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync # 800x600, 60.0Hz; hfreq=37.88, vfreq=60.32 ModeLine "800x600" 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync # 640x480, 75.0Hz; hfreq=37.50, vfreq=75.00 ModeLine "640x480" 31.50 640 656 720 840 480 481 484 500 -hsync -vsync # 640x480, 72.0Hz; hfreq=37.86, vfreq=72.81 ModeLine "640x480" 31.50 640 656 696 816 480 481 484 504 -hsync -vsync # 640x480, 60.0Hz; hfreq=31.47, vfreq=59.94 ModeLine "640x480" 25.17 640 648 744 784 480 482 484 509 -hsync -vsync # Extended modelines with GTF timings # 640x480 @ 100.00 Hz (GTF) hsync: 50.90 kHz; pclk: 43.16 MHz ModeLine "640x480" 43.16 640 680 744 848 480 481 484 509 -HSync +Vsync # 768x576 @ 60.00 Hz (GTF) hsync: 35.82 kHz; pclk: 34.96 MHz ModeLine "768x576" 34.96 768 792 872 976 576 577 580 597 -HSync +Vsync # 768x576 @ 72.00 Hz (GTF) hsync: 43.27 kHz; pclk: 42.93 MHz ModeLine "768x576" 42.93 768 800 880 992 576 577 580 601 -HSync +Vsync # 768x576 @ 75.00 Hz (GTF) hsync: 45.15 kHz; pclk: 45.51 MHz ModeLine "768x576" 45.51 768 808 888 1008 576 577 580 602 -HSync +Vsync # 768x576 @ 85.00 Hz (GTF) hsync: 51.42 kHz; pclk: 51.84 MHz ModeLine "768x576" 51.84 768 808 888 1008 576 577 580 605 -HSync +Vsync # 768x576 @ 100.00 Hz (GTF) hsync: 61.10 kHz; pclk: 62.57 MHz ModeLine "768x576" 62.57 768 816 896 1024 576 577 580 611 -HSync +Vsync # 800x600 @ 100.00 Hz (GTF) hsync: 63.60 kHz; pclk: 68.18 MHz ModeLine "800x600" 68.18 800 848 936 1072 600 601 604 636 -HSync +Vsync # 1024x768 @ 100.00 Hz (GTF) hsync: 81.40 kHz; pclk: 113.31 MHz #ModeLine "1024x768" 113.31 1024 1096 1208 1392 768 769 772 814 -HSync +Vsync # 1152x864 @ 60.00 Hz (GTF) hsync: 53.70 kHz; pclk: 81.62 MHz #ModeLine "1152x864" 81.62 1152 1216 1336 1520 864 865 868 895 -HSync +Vsync # 1152x864 @ 85.00 Hz (GTF) hsync: 77.10 kHz; pclk: 119.65 MHz #ModeLine "1152x864" 119.65 1152 1224 1352 1552 864 865 868 907 -HSync +Vsync # 1152x864 @ 100.00 Hz (GTF) hsync: 91.50 kHz; pclk: 143.47 MHz #ModeLine "1152x864" 143.47 1152 1232 1360 1568 864 865 868 915 -HSync +Vsync # 1280x960 @ 72.00 Hz (GTF) hsync: 72.07 kHz; pclk: 124.54 MHz #ModeLine "1280x960" 124.54 1280 1368 1504 1728 960 961 964 1001 -HSync +Vsync # 1280x960 @ 75.00 Hz (GTF) hsync: 75.15 kHz; pclk: 129.86 MHz #ModeLine "1280x960" 129.86 1280 1368 1504 1728 960 961 964 1002 -HSync +Vsync # 1280x960 @ 100.00 Hz (GTF) hsync: 101.70 kHz; pclk: 178.99 MHz #ModeLine "1280x960" 178.99 1280 1376 1520 1760 960 961 964 1017 -HSync +Vsync # 1280x1024 @ 100.00 Hz (GTF) hsync: 108.50 kHz; pclk: 190.96 MHz #ModeLine "1280x1024" 190.96 1280 1376 1520 1760 1024 1025 1028 1085 -HSync +Vsync # 1400x1050 @ 60.00 Hz (GTF) hsync: 65.22 kHz; pclk: 122.61 MHz #ModeLine "1400x1050" 122.61 1400 1488 1640 1880 1050 1051 1054 1087 -HSync +Vsync # 1400x1050 @ 72.00 Hz (GTF) hsync: 78.77 kHz; pclk: 149.34 MHz #ModeLine "1400x1050" 149.34 1400 1496 1648 1896 1050 1051 1054 1094 -HSync +Vsync # 1400x1050 @ 75.00 Hz (GTF) hsync: 82.20 kHz; pclk: 155.85 MHz #ModeLine "1400x1050" 155.85 1400 1496 1648 1896 1050 1051 1054 1096 -HSync +Vsync # 1400x1050 @ 85.00 Hz (GTF) hsync: 93.76 kHz; pclk: 179.26 MHz #ModeLine "1400x1050" 179.26 1400 1504 1656 1912 1050 1051 1054 1103 -HSync +Vsync # 1400x1050 @ 100.00 Hz (GTF) hsync: 111.20 kHz; pclk: 214.39 MHz #ModeLine "1400x1050" 214.39 1400 1512 1664 1928 1050 1051 1054 1112 -HSync +Vsync # 1600x1200 @ 100.00 Hz (GTF) hsync: 127.10 kHz; pclk: 280.64 MHz #ModeLine "1600x1200" 280.64 1600 1728 1904 2208 1200 1201 1204 1271 -HSync +Vsync # 1920x1200 @ 60.00 Hz (GTF) hsync: 74.52; pclk: 193.16 MHz #Modeline "1920x1200" 193.16 1920 2048 2256 2592 1200 1201 1204 1242 -HSync +HSync EndSection Section "Device" ### Available Driver options are:- # sw_cursor is needed for some ati and radeon cards Option "sw_cursor" #Option "hw_cursor" #Option "NoAccel" #Option "ShowCache" #Option "ShadowFB" #Option "UseFBDev" #Option "Rotate" Identifier "Card0" # The following line is auto-generated by KNOPPIX mkxf86config Driver "ati" VendorName "All" BoardName "All" # BusID "PCI:1:0:0" EndSection Section "Screen" Identifier "Screen0" Device "Card0" Monitor "Monitor0" DefaultColorDepth 16 SubSection "Display" Depth 1 Modes "1024x768" "800x600" "640x480" EndSubSection SubSection "Display" Depth 4 Modes "1024x768" "800x600" "640x480" EndSubSection SubSection "Display" Depth 8 Modes "1024x768" "800x600" "640x480" EndSubSection SubSection "Display" Depth 15 Modes "1024x768" "800x600" "640x480" EndSubSection SubSection "Display" Depth 16 Modes "1024x768" "800x600" "640x480" EndSubSection SubSection "Display" Depth 24 Modes "1024x768" "800x600" "640x480" EndSubSection SubSection "Display" Depth 32 Modes "1024x768" "800x600" "640x480" EndSubSection EndSection Section "DRI" Mode 0666 EndSection This makes for a pretty long post, but am unsure how else to post these logs. Thanks, it would be cool if I get to watch a movie tonight on the projector. JJ |
|
| Author: | tjc [ Fri Feb 08, 2008 7:19 pm ] |
| Post subject: | |
The xorg.conf is helpful but where did you get the idea that the dmesg log was appropriate for a problem with TV output under X? You need to go back and look at the /var/log/Xorg.0.log As the wiki page says: Quote: Problem: Your video card isn't working for some reason
Diagnoses: Execute the following command to view the log file and look for any errors. Of particular interest "no valid modes found", "no Xv support available", "could not load module", fatal errors, virtual and actual resolution differ, ... more /var/log/Xorg.0.log In much older releases which use the XFree86 server the command will be: more /var/log/XFree86.0.log Problem: You need to determine the version of the nVidia video driver installed. Diagnoses: Execute the following command: grep -C1 'Module nvidia' /var/log/Xorg.0.log For much older releases the file to search will be "/var/log/XFree86.0.log" instead of "Xorg.0.log". Problem: You are having problems setting up HDTV modeilnes in your X configuration Diagnoses: Increase the verbosity of your X server by changing the command in /etc/X11/xinit/xserverrc to be: exec /usr/bin/X11/X -nolisten tcp -logverbose 6 Then restart the server and check the /var/log/Xorg.0.log file as described above, which should now tell you why it is rejecting modelines, what the vertical refresh for each modeline is, and all of the details of the EDID modelines that were being reported by the TV. My first guess would be that you installed without using the "tv" option, got the generic config file, and need to get an appropriate xorg.conf for TV output. For Nvidia I could point you to an appropriate sample config file to try, but ATI is another question. OBTW - S-Video isn't going to get full resolution out of that projector, it will only do NTSC at ~720x480 (640x480) or PAL resolutions. |
|
| Author: | roofchop [ Fri Feb 08, 2008 9:46 pm ] |
| Post subject: | |
I was mostly just grasping when I posted my dmseg, it sounded like a good thing to post. Anyway, you are right, I did select the no TV out option, as I used to use a M1-DA to DVI cable to run the projector, but while trying to get it to work with VGA to the monitor, I think I broke the M!-DA input on the projector (maybe just the cable). I accidently unplugged it while it was on. The card still puts out DVI, but the projector won't recognize any DVI source. I was hoping to get buy using S-video and maybe the HDMI on the projector still works. I will test it when I can get the right cablage, or find someone with HDMI source I can test it with. I was hoping there was something I could do other than reinstall to make the S-Video work. Here is the my Xorg.0.log if it helps: [code] X Window System Version 7.1.1 Release Date: 12 May 2006 X Protocol Version 11, Revision 0, Release 7.1.1 Build Operating System: UNKNOWN Current Operating System: Linux mythtv 2.6.18-chw-13 #1 SMP PREEMPT Sat Jun 2 21:06:06 PDT 2007 i686 Build Date: 04 April 2007 Before reporting problems, check http://wiki.x.org to make sure that you have the latest version. Module Loader present Markers: (--) probed, (**) from config file, (==) default setting, (++) from command line, (!!) notice, (II) informational, (WW) warning, (EE) error, (NI) not implemented, (??) unknown. (==) Log file: "/var/log/Xorg.0.log", Time: Fri Feb 8 22:33:39 2008 (==) Using config file: "/etc/X11/xorg.conf" (==) ServerLayout "XFree86 Configured" (**) |-->Screen "Screen0" (0) (**) | |-->Monitor "Monitor0" (**) | |-->Device "Card0" (**) |-->Input Device "Keyboard0" (**) |-->Input Device "USB Mouse" (WW) The directory "/usr/share/fonts/X11/Speedo" does not exist. Entry deleted from font path. (WW) The directory "/usr/share/fonts/X11/PEX" does not exist. Entry deleted from font path. (WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist. Entry deleted from font path. (WW) The directory "/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType" does not exist. Entry deleted from font path. (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/truetype". Entry deleted from font path. (Run 'mkfontdir' on "/usr/share/fonts/truetype"). (WW) The directory "/usr/share/fonts/latex-ttf-fonts" does not exist. Entry deleted from font path. (**) FontPath set to: /usr/share/fonts/X11/misc:unscaled, /usr/share/fonts/X11/75dpi:unscaled, /usr/share/fonts/X11/100dpi:unscaled, /usr/share/fonts/X11/Type1 (**) RgbPath set to "/usr/share/X11/rgb" (**) ModulePath set to "/usr/lib/xorg/modules" (**) Option "AllowMouseOpenFail" "true" (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory) (II) No APM support in BIOS or kernel (II) Module ABI versions: X.Org ANSI C Emulation: 0.3 X.Org Video Driver: 1.0 X.Org XInput driver : 0.6 X.Org Server Extension : 0.3 X.Org Font Renderer : 0.5 (II) Loader running on linux (II) LoadModule: "bitmap" (II) Loading /usr/lib/xorg/modules/fonts/libbitmap.so (II) Module bitmap: vendor="X.Org Foundation" compiled for 7.1.1, module version = 1.0.0 Module class: X.Org Font Renderer ABI class: X.Org Font Renderer, version 0.5 (II) Loading font Bitmap (II) LoadModule: "pcidata" (II) Loading /usr/lib/xorg/modules/libpcidata.so (II) Module pcidata: vendor="X.Org Foundation" compiled for 7.1.1, module version = 1.0.0 ABI class: X.Org Video Driver, version 1.0 (--) using VT number 7 (II) PCI: PCI scan (all values are in hex) (II) PCI: 00:00:0: chip 8086,2570 card 1043,80a5 rev 02 class 06,00,00 hdr 00 (II) PCI: 00:01:0: chip 8086,2571 card 0000,0000 rev 02 class 06,04,00 hdr 01 (II) PCI: 00:1d:0: chip 8086,24d2 card 1043,80a6 rev 02 class 0c,03,00 hdr 80 (II) PCI: 00:1d:1: chip 8086,24d4 card 1043,80a6 rev 02 class 0c,03,00 hdr 00 (II) PCI: 00:1d:2: chip 8086,24d7 card 1043,80a6 rev 02 class 0c,03,00 hdr 00 (II) PCI: 00:1d:3: chip 8086,24de card 1043,80a6 rev 02 class 0c,03,00 hdr 00 (II) PCI: 00:1d:7: chip 8086,24dd card 1043,80a6 rev 02 class 0c,03,20 hdr 00 (II) PCI: 00:1e:0: chip 8086,244e card 0000,0000 rev c2 class 06,04,00 hdr 01 (II) PCI: 00:1f:0: chip 8086,24d0 card 0000,0000 rev 02 class 06,01,00 hdr 80 (II) PCI: 00:1f:1: chip 8086,24db card 1043,80a6 rev 02 class 01,01,8a hdr 00 (II) PCI: 00:1f:2: chip 8086,24d1 card 1043,80a6 rev 02 class 01,01,8f hdr 00 (II) PCI: 00:1f:3: chip 8086,24d3 card 1043,80a6 rev 02 class 0c,05,00 hdr 00 (II) PCI: 00:1f:5: chip 8086,24d5 card 1043,80b0 rev 02 class 04,01,00 hdr 00 (II) PCI: 01:00:0: chip 1002,5960 card 174b,0130 rev 01 class 03,00,00 hdr 80 (II) PCI: 01:00:1: chip 1002,5940 card 174b,0131 rev 01 class 03,80,00 hdr 00 (II) PCI: 02:08:0: chip 8086,1050 card 1043,80f8 rev 02 class 02,00,00 hdr 00 (II) PCI: 02:0a:0: chip 4444,0016 card 0070,37f1 rev 01 class 04,00,00 hdr 00 (II) PCI: End of PCI scan (II) Intel Bridge workaround enabled (II) Host-to-PCI bridge: (II) Bus 0: bridge is at (0:0:0), (0,0,2), BCTRL: 0x0008 (VGA_EN is set) (II) Bus 0 I/O range: [0] -1 0 0x00000000 - 0x0000ffff (0x10000) IX[B] (II) Bus 0 non-prefetchable memory range: [0] -1 0 0x00000000 - 0xffffffff (0x0) MX[B] (II) Bus 0 prefetchable memory range: [0] -1 0 0x00000000 - 0xffffffff (0x0) MX[B] (II) PCI-to-PCI bridge: (II) Bus 1: bridge is at (0:1:0), (0,1,1), BCTRL: 0x0008 (VGA_EN is set) (II) Bus 1 I/O range: [0] -1 0 0x0000c000 - 0x0000cfff (0x1000) IX[B] (II) Bus 1 non-prefetchable memory range: [0] -1 0 0xfe900000 - 0xfe9fffff (0x100000) MX[B] (II) Bus 1 prefetchable memory range: [0] -1 0 0xd3f00000 - 0xf3efffff (0x20000000) MX[B] (II) Subtractive PCI-to-PCI bridge: (II) Bus 2: bridge is at (0:30:0), (0,2,2), BCTRL: 0x0002 (VGA_EN is cleared) (II) Bus 2 I/O range: [0] -1 0 0x0000d000 - 0x0000dfff (0x1000) IX[B] (II) Bus 2 non-prefetchable memory range: [0] -1 0 0xfea00000 - 0xfeafffff (0x100000) MX[B] (II) Bus 2 prefetchable memory range: [0] -1 0 0xf3f00000 - 0xfbefffff (0x8000000) MX[B] (II) PCI-to-ISA bridge: (II) Bus -1: bridge is at (0:31:0), (0,-1,-1), BCTRL: 0x0008 (VGA_EN is set) (--) PCI:*(1:0:0) ATI Technologies Inc RV280 [Radeon 9200 PRO] rev 1, Mem @ 0xe8000000/27, 0xfe9f0000/16, I/O @ 0xc000/8, BIOS @ 0xfe9c0000/17 (--) PCI: (1:0:1) ATI Technologies Inc RV280 [Radeon 9200 PRO] (Secondary) rev 1, Mem @ 0xe0000000/27, 0xfe9e0000/16 (--) PCI: (2:10:0) unknown vendor (0x4444) unknown chipset (0x0016) rev 1, Mem @ 0xf4000000/26 (II) Addressable bus resource ranges are [0] -1 0 0x00000000 - 0xffffffff (0x0) MX[B] [1] -1 0 0x00000000 - 0x0000ffff (0x10000) IX[B] (II) OS-reported resource ranges: [0] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B) [1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B] [2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B] [3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B] [4] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B] [5] -1 0 0x00000000 - 0x000000ff (0x100) IX[B] (II) PCI Memory resource overlap reduced 0xfc000000 from 0xfdffffff to 0xfbffffff (II) Active PCI resource ranges: [0] -1 0 0xfeaff000 - 0xfeafffff (0x1000) MX[B] [1] -1 0 0xfebff400 - 0xfebff4ff (0x100) MX[B] [2] -1 0 0xfebff800 - 0xfebff9ff (0x200) MX[B] [3] -1 0 0x30000000 - 0x300003ff (0x400) MX[B] [4] -1 0 0xfebffc00 - 0xfebfffff (0x400) MX[B] [5] -1 0 0xfc000000 - 0xfbffffff (0x0) MX[B]O [6] -1 0 0xf4000000 - 0xf7ffffff (0x4000000) MX[B](B) [7] -1 0 0xfe9e0000 - 0xfe9effff (0x10000) MX[B](B) [8] -1 0 0xe0000000 - 0xe7ffffff (0x8000000) MX[B](B) [9] -1 0 0xfe9c0000 - 0xfe9dffff (0x20000) MX[B](B) [10] -1 0 0xfe9f0000 - 0xfe9fffff (0x10000) MX[B](B) [11] -1 0 0xe8000000 - 0xefffffff (0x8000000) MX[B](B) [12] -1 0 0x0000df00 - 0x0000df3f (0x40) IX[B] [13] -1 0 0x0000ee80 - 0x0000eebf (0x40) IX[B] [14] -1 0 0x0000e800 - 0x0000e8ff (0x100) IX[B] [15] -1 0 0x00000400 - 0x0000041f (0x20) IX[B] [16] -1 0 0x0000ef60 - 0x0000ef6f (0x10) IX[B] [17] -1 0 0x0000efa8 - 0x0000efab (0x4) IX[B] [18] -1 0 0x0000efa0 - 0x0000efa7 (0x8) IX[B] [19] -1 0 0x0000efac - 0x0000efaf (0x4) IX[B] [20] -1 0 0x0000efe0 - 0x0000efe7 (0x8) IX[B] [21] -1 0 0x0000fc00 - 0x0000fc0f (0x10) IX[B] [22] -1 0 0x0000ef80 - 0x0000ef9f (0x20) IX[B] [23] -1 0 0x0000ef40 - 0x0000ef5f (0x20) IX[B] [24] -1 0 0x0000ef20 - 0x0000ef3f (0x20) IX[B] [25] -1 0 0x0000ef00 - 0x0000ef1f (0x20) IX[B] [26] -1 0 0x0000c000 - 0x0000c0ff (0x100) IX[B](B) (II) Active PCI resource ranges after removing overlaps: [0] -1 0 0xfeaff000 - 0xfeafffff (0x1000) MX[B] [1] -1 0 0xfebff400 - 0xfebff4ff (0x100) MX[B] [2] -1 0 0xfebff800 - 0xfebff9ff (0x200) MX[B] [3] -1 0 0x30000000 - 0x300003ff (0x400) MX[B] [4] -1 0 0xfebffc00 - 0xfebfffff (0x400) MX[B] [5] -1 0 0xfc000000 - 0xfbffffff (0x0) MX[B]O [6] -1 0 0xf4000000 - 0xf7ffffff (0x4000000) MX[B](B) [7] -1 0 0xfe9e0000 - 0xfe9effff (0x10000) MX[B](B) [8] -1 0 0xe0000000 - 0xe7ffffff (0x8000000) MX[B](B) [9] -1 0 0xfe9c0000 - 0xfe9dffff (0x20000) MX[B](B) [10] -1 0 0xfe9f0000 - 0xfe9fffff (0x10000) MX[B](B) [11] -1 0 0xe8000000 - 0xefffffff (0x8000000) MX[B](B) [12] -1 0 0x0000df00 - 0x0000df3f (0x40) IX[B] [13] -1 0 0x0000ee80 - 0x0000eebf (0x40) IX[B] [14] -1 0 0x0000e800 - 0x0000e8ff (0x100) IX[B] [15] -1 0 0x00000400 - 0x0000041f (0x20) IX[B] [16] -1 0 0x0000ef60 - 0x0000ef6f (0x10) IX[B] [17] -1 0 0x0000efa8 - 0x0000efab (0x4) IX[B] [18] -1 0 0x0000efa0 - 0x0000efa7 (0x8) IX[B] [19] -1 0 0x0000efac - 0x0000efaf (0x4) IX[B] [20] -1 0 0x0000efe0 - 0x0000efe7 (0x8) IX[B] [21] -1 0 0x0000fc00 - 0x0000fc0f (0x10) IX[B] [22] -1 0 0x0000ef80 - 0x0000ef9f (0x20) IX[B] [23] -1 0 0x0000ef40 - 0x0000ef5f (0x20) IX[B] [24] -1 0 0x0000ef20 - 0x0000ef3f (0x20) IX[B] [25] -1 0 0x0000ef00 - 0x0000ef1f (0x20) IX[B] [26] -1 0 0x0000c000 - 0x0000c0ff (0x100) IX[B](B) (II) OS-reported resource ranges after removing overlaps with PCI: [0] -1 0 0x00100000 - 0x2fffffff (0x2ff00000) MX[B]E(B) [1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B] [2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B] [3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B] [4] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B] [5] -1 0 0x00000000 - 0x000000ff (0x100) IX[B] (II) All system resource ranges: [0] -1 0 0x00100000 - 0x2fffffff (0x2ff00000) MX[B]E(B) [1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B] [2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B] [3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B] [4] -1 0 0xfeaff000 - 0xfeafffff (0x1000) MX[B] [5] -1 0 0xfebff400 - 0xfebff4ff (0x100) MX[B] [6] -1 0 0xfebff800 - 0xfebff9ff (0x200) MX[B] [7] -1 0 0x30000000 - 0x300003ff (0x400) MX[B] [8] -1 0 0xfebffc00 - 0xfebfffff (0x400) MX[B] [9] -1 0 0xfc000000 - 0xfbffffff (0x0) MX[B]O [10] -1 0 0xf4000000 - 0xf7ffffff (0x4000000) MX[B](B) [11] -1 0 0xfe9e0000 - 0xfe9effff (0x10000) MX[B](B) [12] -1 0 0xe0000000 - 0xe7ffffff (0x8000000) MX[B](B) [13] -1 0 0xfe9c0000 - 0xfe9dffff (0x20000) MX[B](B) [14] -1 0 0xfe9f0000 - 0xfe9fffff (0x10000) MX[B](B) [15] -1 0 0xe8000000 - 0xefffffff (0x8000000) MX[B](B) [16] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B] [17] -1 0 0x00000000 - 0x000000ff (0x100) IX[B] [18] -1 0 0x0000df00 - 0x0000df3f (0x40) IX[B] [19] -1 0 0x0000ee80 - 0x0000eebf (0x40) IX[B] [20] -1 0 0x0000e800 - 0x0000e8ff (0x100) IX[B] [21] -1 0 0x00000400 - 0x0000041f (0x20) IX[B] [22] -1 0 0x0000ef60 - 0x0000ef6f (0x10) IX[B] [23] -1 0 0x0000efa8 - 0x0000efab (0x4) IX[B] [24] -1 0 0x0000efa0 - 0x0000efa7 (0x8) IX[B] [25] -1 0 0x0000efac - 0x0000efaf (0x4) IX[B] [26] -1 0 0x0000efe0 - 0x0000efe7 (0x8) IX[B] [27] -1 0 0x0000fc00 - 0x0000fc0f (0x10) IX[B] [28] -1 0 0x0000ef80 - 0x0000ef9f (0x20) IX[B] [29] -1 0 0x0000ef40 - 0x0000ef5f (0x20) IX[B] [30] -1 0 0x0000ef20 - 0x0000ef3f (0x20) IX[B] [31] -1 0 0x0000ef00 - 0x0000ef1f (0x20) IX[B] [32] -1 0 0x0000c000 - 0x0000c0ff (0x100) IX[B](B) (II) LoadModule: "dbe" (II) Loading /usr/lib/xorg/modules/extensions/libdbe.so (II) Module dbe: vendor="X.Org Foundation" compiled for 7.1.1, module version = 1.0.0 Module class: X.Org Server Extension ABI class: X.Org Server Extension, version 0.3 (II) Loading extension DOUBLE-BUFFER (II) LoadModule: "dri" (II) Loading /usr/lib/xorg/modules/extensions/libdri.so (II) Module dri: vendor="X.Org Foundation" compiled for 7.1.1, module version = 1.0.0 ABI class: X.Org Server Extension, version 0.3 (II) Loading sub module "drm" (II) LoadModule: "drm" (II) Loading /usr/lib/xorg/modules/linux/libdrm.so (II) Module drm: vendor="X.Org Foundation" compiled for 7.1.1, module version = 1.0.0 ABI class: X.Org Server Extension, version 0.3 (II) Loading extension XFree86-DRI (II) LoadModule: "glx" (II) Loading /usr/lib/xorg/modules/extensions/libglx.so (II) Module glx: vendor="X.Org Foundation" compiled for 7.1.1, module version = 1.0.0 ABI class: X.Org Server Extension, version 0.3 (==) AIGLX enabled (II) Loading extension GLX (II) LoadModule: "freetype" (II) Loading /usr/lib/xorg/modules/fonts/libfreetype.so (II) Module freetype: vendor="X.Org Foundation & the After X-TT Project" compiled for 7.1.1, module version = 2.1.0 Module class: X.Org Font Renderer ABI class: X.Org Font Renderer, version 0.5 (II) Loading font FreeType (II) LoadModule: "type1" (II) Loading /usr/lib/xorg/modules/fonts/libtype1.so (II) Module type1: vendor="X.Org Foundation" compiled for 7.1.1, module version = 1.0.2 Module class: X.Org Font Renderer ABI class: X.Org Font Renderer, version 0.5 (II) Loading font Type1 (II) LoadModule: "record" (II) Loading /usr/lib/xorg/modules/extensions/librecord.so (II) Module record: vendor="X.Org Foundation" compiled for 7.1.1, module version = 1.13.0 Module class: X.Org Server Extension ABI class: X.Org Server Extension, version 0.3 (II) Loading extension RECORD (II) LoadModule: "extmod" (II) Loading /usr/lib/xorg/modules/extensions/libextmod.so (II) Module extmod: vendor="X.Org Foundation" compiled for 7.1.1, module version = 1.0.0 Module class: X.Org Server Extension ABI class: X.Org Server Extension, version 0.3 (II) Loading extension SHAPE (II) Loading extension MIT-SUNDRY-NONSTANDARD (II) Loading extension BIG-REQUESTS (II) Loading extension SYNC (II) Loading extension MIT-SCREEN-SAVER (II) Loading extension XC-MISC (II) Loading extension XFree86-VidModeExtension (II) Loading extension XFree86-Misc (II) Loading extension DPMS (II) Loading extension TOG-CUP (II) Loading extension Extended-Visual-Information (II) Loading extension XVideo (II) Loading extension XVideo-MotionCompensation (II) Loading extension X-Resource (II) LoadModule: "ati" (II) Loading /usr/lib/xorg/modules/drivers/ati_drv.so (II) Module ati: vendor="X.Org Foundation" compiled for 7.1.1, module version = 6.6.3 Module class: X.Org Video Driver ABI class: X.Org Video Driver, version 1.0 (II) LoadModule: "kbd" (II) Loading /usr/lib/xorg/modules/input/kbd_drv.so (II) Module kbd: vendor="X.Org Foundation" compiled for 7.1.1, module version = 1.1.0 Module class: X.Org XInput Driver ABI class: X.Org XInput driver, version 0.6 (II) LoadModule: "mouse" (II) Loading /usr/lib/xorg/modules/input/mouse_drv.so (II) Module mouse: vendor="X.Org Foundation" compiled for 7.1.1, module version = 1.1.1 Module class: X.Org XInput Driver ABI class: X.Org XInput driver, version 0.6 (II) ATI: ATI driver (version 6.6.3) for chipsets: ati, ativga (II) R128: Driver for ATI Rage 128 chipsets: ATI Rage 128 Mobility M3 LE (PCI), ATI Rage 128 Mobility M3 LF (AGP), ATI Rage 128 Mobility M4 MF (AGP), ATI Rage 128 Mobility M4 ML (AGP), ATI Rage 128 Pro GL PA (AGP?), ATI Rage 128 Pro GL PB (AGP?), ATI Rage 128 Pro GL PC (AGP?), ATI Rage 128 Pro GL PD (PCI), ATI Rage 128 Pro GL PE (AGP?), ATI Rage 128 Pro GL PF (AGP), ATI Rage 128 Pro VR PG (AGP?), ATI Rage 128 Pro VR PH (AGP?), ATI Rage 128 Pro VR PI (AGP?), ATI Rage 128 Pro VR PJ (AGP?), ATI Rage 128 Pro VR PK (AGP?), ATI Rage 128 Pro VR PL (AGP?), ATI Rage 128 Pro VR PM (AGP?), ATI Rage 128 Pro VR PN (AGP?), ATI Rage 128 Pro VR PO (AGP?), ATI Rage 128 Pro VR PP (PCI), ATI Rage 128 Pro VR PQ (AGP?), ATI Rage 128 Pro VR PR (PCI), ATI Rage 128 Pro VR PS (AGP?), ATI Rage 128 Pro VR PT (AGP?), ATI Rage 128 Pro VR PU (AGP?), ATI Rage 128 Pro VR PV (AGP?), ATI Rage 128 Pro VR PW (AGP?), ATI Rage 128 Pro VR PX (AGP?), ATI Rage 128 GL RE (PCI), ATI Rage 128 GL RF (AGP), ATI Rage 128 RG (AGP), ATI Rage 128 VR RK (PCI), ATI Rage 128 VR RL (AGP), ATI Rage 128 4X SE (AGP?), ATI Rage 128 4X SF (AGP?), ATI Rage 128 4X SG (AGP?), ATI Rage 128 4X SH (AGP?), ATI Rage 128 4X SK (AGP?), ATI Rage 128 4X SL (AGP?), ATI Rage 128 4X SM (AGP), ATI Rage 128 4X SN (AGP?), ATI Rage 128 Pro ULTRA TF (AGP), ATI Rage 128 Pro ULTRA TL (AGP), ATI Rage 128 Pro ULTRA TR (AGP), ATI Rage 128 Pro ULTRA TS (AGP?), ATI Rage 128 Pro ULTRA TT (AGP?), ATI Rage 128 Pro ULTRA TU (AGP?) (II) RADEON: Driver for ATI Radeon chipsets: ATI Radeon QD (AGP), ATI Radeon QE (AGP), ATI Radeon QF (AGP), ATI Radeon QG (AGP), ATI Radeon VE/7000 QY (AGP/PCI), ATI Radeon VE/7000 QZ (AGP/PCI), ATI ES1000 515E (PCI), ATI ES1000 5969 (PCI), ATI Radeon Mobility M7 LW (AGP), ATI Mobility FireGL 7800 M7 LX (AGP), ATI Radeon Mobility M6 LY (AGP), ATI Radeon Mobility M6 LZ (AGP), ATI Radeon IGP320 (A3) 4136, ATI Radeon IGP320M (U1) 4336, ATI Radeon IGP330/340/350 (A4) 4137, ATI Radeon IGP330M/340M/350M (U2) 4337, ATI Radeon 7000 IGP (A4+) 4237, ATI Radeon Mobility 7000 IGP 4437, ATI FireGL 8700/8800 QH (AGP), ATI Radeon 8500 QL (AGP), ATI Radeon 9100 QM (AGP), ATI Radeon 8500 AIW BB (AGP), ATI Radeon 8500 AIW BC (AGP), ATI Radeon 7500 QW (AGP/PCI), ATI Radeon 7500 QX (AGP/PCI), ATI Radeon 9000/PRO If (AGP/PCI), ATI Radeon 9000 Ig (AGP/PCI), ATI FireGL Mobility 9000 (M9) Ld (AGP), ATI Radeon Mobility 9000 (M9) Lf (AGP), ATI Radeon Mobility 9000 (M9) Lg (AGP), ATI Radeon 9100 IGP (A5) 5834, ATI Radeon Mobility 9100 IGP (U3) 5835, ATI Radeon 9100 PRO IGP 7834, ATI Radeon Mobility 9200 IGP 7835, ATI Radeon 9250 5960 (AGP), ATI Radeon 9200 5961 (AGP), ATI Radeon 9200 5962 (AGP), ATI Radeon 9200SE 5964 (AGP), ATI FireMV 2200 (PCI), ATI Radeon Mobility 9200 (M9+) 5C61 (AGP), ATI Radeon Mobility 9200 (M9+) 5C63 (AGP), ATI Radeon 9500 AD (AGP), ATI Radeon 9500 AE (AGP), ATI Radeon 9600TX AF (AGP), ATI FireGL Z1 AG (AGP), ATI Radeon 9700 Pro ND (AGP), ATI Radeon 9700/9500Pro NE (AGP), ATI Radeon 9600TX NF (AGP), ATI FireGL X1 NG (AGP), ATI Radeon 9600 AP (AGP), ATI Radeon 9600SE AQ (AGP), ATI Radeon 9600XT AR (AGP), ATI Radeon 9600 AS (AGP), ATI FireGL T2 AT (AGP), ATI FireGL RV360 AV (AGP), ATI Radeon Mobility 9600/9700 (M10/M11) NP (AGP), ATI Radeon Mobility 9600 (M10) NQ (AGP), ATI Radeon Mobility 9600 (M11) NR (AGP), ATI Radeon Mobility 9600 (M10) NS (AGP), ATI FireGL Mobility T2 (M10) NT (AGP), ATI FireGL Mobility T2e (M11) NV (AGP), ATI Radeon 9650, ATI Radeon 9800SE AH (AGP), ATI Radeon 9800 AI (AGP), ATI Radeon 9800 AJ (AGP), ATI FireGL X2 AK (AGP), ATI Radeon 9800PRO NH (AGP), ATI Radeon 9800 NI (AGP), ATI FireGL X2 NK (AGP), ATI Radeon 9800XT NJ (AGP), ATI Radeon X600 (RV380) 3E50 (PCIE), ATI FireGL V3200 (RV380) 3E54 (PCIE), ATI Radeon Mobility X600 (M24) 3150 (PCIE), ATI Radeon Mobility X300 (M24) 3152 (PCIE), ATI FireGL M24 GL 3154 (PCIE), ATI Radeon X300 (RV370) 5B60 (PCIE), ATI Radeon X600 (RV370) 5B62 (PCIE), ATI Radeon X550 (RV370) 5B63 (PCIE), ATI FireGL V3100 (RV370) 5B64 (PCIE), ATI FireMV 2200 PCIE (RV370) 5B65 (PCIE), ATI Radeon Mobility X300 (M22) 5460 (PCIE), ATI Radeon Mobility X600 SE (M24C) 5462 (PCIE), ATI FireGL M22 GL 5464 (PCIE), ATI Radeon XPRESS 200 5A41 (PCIE), ATI Radeon XPRESS 200M 5A42 (PCIE), ATI Radeon XPRESS 200 5A61 (PCIE), ATI Radeon XPRESS 200M 5A62 (PCIE), ATI Radeon XPRESS 200 5954 (PCIE), ATI Radeon XPRESS 200M 5955 (PCIE), ATI Radeon XPRESS 200 5974 (PCIE), ATI Radeon XPRESS 200M 5975 (PCIE), ATI FireGL V5000 (RV410) (PCIE), ATI Mobility FireGL V5000 (M26) (PCIE), ATI Mobility FireGL V5000 (M26) (PCIE), ATI Mobility Radeon X700 XL (M26) (PCIE), ATI Mobility Radeon X700 (M26) (PCIE), ATI Mobility Radeon X700 (M26) (PCIE), ATI Radeon X700 PRO (RV410) (PCIE), ATI Radeon X700 XT (RV410) (PCIE), ATI Radeon X700 (RV410) (PCIE), ATI Radeon X700 SE (RV410) (PCIE), ATI Radeon X700 SE (RV410) (PCIE), ATI Radeon X800 (R420) JH (AGP), ATI Radeon X800PRO (R420) JI (AGP), ATI Radeon X800SE (R420) JJ (AGP), ATI Radeon X800 (R420) JK (AGP), ATI Radeon X800 (R420) JL (AGP), ATI FireGL X3 (R420) JM (AGP), ATI Radeon Mobility 9800 (M18) JN (AGP), ATI Radeon X800XT (R420) JP (AGP), ATI Radeon X800 SE (R420) (AGP), ATI Radeon AIW X800 VE (R420) JT (AGP), ATI Radeon X800 (R423) UH (PCIE), ATI Radeon X800PRO (R423) UI (PCIE), ATI Radeon X800LE (R423) UJ (PCIE), ATI Radeon X800SE (R423) UK (PCIE), ATI FireGL V5100 (R423) UQ (PCIE), ATI FireGL unknown (R423) UR (PCIE), ATI FireGL unknown (R423) UT (PCIE), ATI Radeon X800XT (R423) 5D57 (PCIE), ATI FireGL V7100 (R423) (PCIE), ATI Mobility FireGL V5100 (M28) (PCIE), ATI Mobility Radeon X800 (M28) (PCIE), ATI Mobility Radeon X800 XT (M28) (PCIE), ATI Radeon X800 (R430) (PCIE), ATI Radeon X800 XL (R430) (PCIE), ATI Radeon X800 SE (R430) (PCIE), ATI Radeon X800 XTP (R430) (PCIE), ATI Radeon X850 5D4C (PCIE), ATI unknown Radeon / FireGL (R480) 5D50 (PCIE), ATI Radeon X850 SE (R480) (PCIE), ATI Radeon X850 PRO (R480) (PCIE), ATI Radeon X850 XT (R480) (PCIE), ATI Radeon X850 XT PE (R480) (PCIE), ATI Radeon X850 PRO (R480) (AGP), ATI Radeon X850 SE (R480) (AGP), ATI Radeon X850 XT (R480) (AGP), ATI Radeon X850 XT PE (R480) (AGP) (II) Primary Device is: PCI 01:00:0 (II) ATI: Candidate "Device" section "Card0". (--) Assigning device section with no busID to primary device (WW) RADEON: No matching Device section for instance (BusID PCI:1:0:1) found (--) Chipset ATI Radeon 9250 5960 (AGP) found (II) resource ranges after xf86ClaimFixedResources() call: [0] -1 0 0x00100000 - 0x2fffffff (0x2ff00000) MX[B]E(B) [1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B] [2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B] [3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B] [4] -1 0 0xfeaff000 - 0xfeafffff (0x1000) MX[B] [5] -1 0 0xfebff400 - 0xfebff4ff (0x100) MX[B] [6] -1 0 0xfebff800 - 0xfebff9ff (0x200) MX[B] [7] -1 0 0x30000000 - 0x300003ff (0x400) MX[B] [8] -1 0 0xfebffc00 - 0xfebfffff (0x400) MX[B] [9] -1 0 0xfc000000 - 0xfbffffff (0x0) MX[B]O [10] -1 0 0xf4000000 - 0xf7ffffff (0x4000000) MX[B](B) [11] -1 0 0xfe9e0000 - 0xfe9effff (0x10000) MX[B](B) [12] -1 0 0xe0000000 - 0xe7ffffff (0x8000000) MX[B](B) [13] -1 0 0xfe9c0000 - 0xfe9dffff (0x20000) MX[B](B) [14] -1 0 0xfe9f0000 - 0xfe9fffff (0x10000) MX[B](B) [15] -1 0 0xe8000000 - 0xefffffff (0x8000000) MX[B](B) [16] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B] [17] -1 0 0x00000000 - 0x000000ff (0x100) IX[B] [18] -1 0 0x0000df00 - 0x0000df3f (0x40) IX[B] [19] -1 0 0x0000ee80 - 0x0000eebf (0x40) IX[B] [20] -1 0 0x0000e800 - 0x0000e8ff (0x100) IX[B] [21] -1 0 0x00000400 - 0x0000041f (0x20) IX[B] [22] -1 0 0x0000ef60 - 0x0000ef6f (0x10) IX[B] [23] -1 0 0x0000efa8 - 0x0000efab (0x4) IX[B] [24] -1 0 0x0000efa0 - 0x0000efa7 (0x8) IX[B] [25] -1 0 0x0000efac - 0x0000efaf (0x4) IX[B] [26] -1 0 0x0000efe0 - 0x0000efe7 (0x8) IX[B] [27] -1 0 0x0000fc00 - 0x0000fc0f (0x10) IX[B] [28] -1 0 0x0000ef80 - 0x0000ef9f (0x20) IX[B] [29] -1 0 0x0000ef40 - 0x0000ef5f (0x20) IX[B] [30] -1 0 0x0000ef20 - 0x0000ef3f (0x20) IX[B] [31] -1 0 0x0000ef00 - 0x0000ef1f (0x20) IX[B] [32] -1 0 0x0000c000 - 0x0000c0ff (0x100) IX[B](B) (II) Loading sub module "radeon" (II) LoadModule: "radeon" (II) Loading /usr/lib/xorg/modules/drivers/radeon_drv.so (II) Module radeon: vendor="X.Org Foundation" compiled for 7.1.1, module version = 4.2.0 Module class: X.Org Video Driver ABI class: X.Org Video Driver, version 1.0 (II) resource ranges after probing: [0] -1 0 0x00100000 - 0x2fffffff (0x2ff00000) MX[B]E(B) [1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B] [2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B] [3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B] [4] -1 0 0xfeaff000 - 0xfeafffff (0x1000) MX[B] [5] -1 0 0xfebff400 - 0xfebff4ff (0x100) MX[B] [6] -1 0 0xfebff800 - 0xfebff9ff (0x200) MX[B] [7] -1 0 0x30000000 - 0x300003ff (0x400) MX[B] [8] -1 0 0xfebffc00 - 0xfebfffff (0x400) MX[B] [9] -1 0 0xfc000000 - 0xfbffffff (0x0) MX[B]O [10] -1 0 0xf4000000 - 0xf7ffffff (0x4000000) MX[B](B) [11] -1 0 0xfe9e0000 - 0xfe9effff (0x10000) MX[B](B) [12] -1 0 0xe0000000 - 0xe7ffffff (0x8000000) MX[B](B) [13] -1 0 0xfe9c0000 - 0xfe9dffff (0x20000) MX[B](B) [14] -1 0 0xfe9f0000 - 0xfe9fffff (0x10000) MX[B](B) [15] -1 0 0xe8000000 - 0xefffffff (0x8000000) MX[B](B) [16] 0 0 0x000a0000 - 0x000affff (0x10000) MS[B] [17] 0 0 0x000b0000 - 0x000b7fff (0x8000) MS[B] [18] 0 0 0x000b8000 - 0x000bffff (0x8000) MS[B] [19] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B] [20] -1 0 0x00000000 - 0x000000ff (0x100) IX[B] [21] -1 0 0x0000df00 - 0x0000df3f (0x40) IX[B] [22] -1 0 0x0000ee80 - 0x0000eebf (0x40) IX[B] [23] -1 0 0x0000e800 - 0x0000e8ff (0x100) IX[B] [24] -1 0 0x00000400 - 0x0000041f (0x20) IX[B] [25] -1 0 0x0000ef60 - 0x0000ef6f (0x10) IX[B] [26] -1 0 0x0000efa8 - 0x0000efab (0x4) IX[B] [27] -1 0 0x0000efa0 - 0x0000efa7 (0x8) IX[B] [28] -1 0 0x0000efac - 0x0000efaf (0x4) IX[B] [29] -1 0 0x0000efe0 - 0x0000efe7 (0x8) IX[B] [30] -1 0 0x0000fc00 - 0x0000fc0f (0x10) IX[B] [31] -1 0 0x0000ef80 - 0x0000ef9f (0x20) IX[B] [32] -1 0 0x0000ef40 - 0x0000ef5f (0x20) IX[B] [33] -1 0 0x0000ef20 - 0x0000ef3f (0x20) IX[B] [34] -1 0 0x0000ef00 - 0x0000ef1f (0x20) IX[B] [35] -1 0 0x0000c000 - 0x0000c0ff (0x100) IX[B](B) [36] 0 0 0x000003b0 - 0x000003bb (0xc) IS[B] [37] 0 0 0x000003c0 - 0x000003df (0x20) IS[B] (II) Setting vga for screen 0. (**) RADEON(0): RADEONPreInit (II) RADEON(0): MMIO registers at 0xfe9f0000: size 64KB (II) RADEON(0): PCI bus 1 card 0 func 0 (**) RADEON(0): Depth 16, (--) framebuffer bpp 16 (II) RADEON(0): Pixel depth = 16 bits stored in 2 bytes (16 bpp pixmaps) (==) RADEON(0): Default visual is TrueColor (**) RADEON(0): Option "SWcursor" (II) Loading sub module "vgahw" (II) LoadModule: "vgahw" (II) Loading /usr/lib/xorg/modules/libvgahw.so (II) Module vgahw: vendor="X.Org Foundation" compiled for 7.1.1, module version = 0.1.0 ABI class: X.Org Video Driver, version 1.0 (II) RADEON(0): vgaHWGetIOBase: hwp->IOBase is 0x03d0, hwp->PIOOffset is 0x0000 (==) RADEON(0): RGB weight 565 (II) RADEON(0): Using 6 bits per RGB (8 bit DAC) (==) RADEON(0): X server will not keep DPI constant for all screen sizes (II) Loading sub module "int10" (II) LoadModule: "int10" (II) Loading /usr/lib/xorg/modules/libint10.so (II) Module int10: vendor="X.Org Foundation" compiled for 7.1.1, module version = 1.0.0 ABI class: X.Org Video Driver, version 1.0 (II) RADEON(0): initializing int10 (II) Loading sub module "vm86" (II) LoadModule: "vm86" (II) Loading /usr/lib/xorg/modules/libvm86.so (II) Module vm86: vendor="X.Org Foundation" compiled for 7.1.1, module version = 1.0.0 ABI class: X.Org Video Driver, version 1.0 (II) RADEON(0): Primary V_BIOS segment is: 0xc000 (--) RADEON(0): Chipset: "ATI Radeon 9250 5960 (AGP)" (ChipID = 0x5960) (--) RADEON(0): Linear framebuffer at 0xe8000000 (--) RADEON(0): BIOS at 0xfe9c0000 (II) RADEON(0): AGP card detected drmOpenDevice: node name is /dev/dri/card0 drmOpenDevice: open result is -1, (No such device or address) drmOpenDevice: open result is -1, (No such device or address) drmOpenDevice: Open failed drmOpenByBusid: Searching for BusID pci:0000:01:00.0 drmOpenDevice: node name is /dev/dri/card0 drmOpenDevice: open result is 7, (OK) drmOpenByBusid: drmOpenMinor returns 7 drmOpenByBusid: drmGetBusid reports pci:0000:01:00.0 (II) RADEON(0): [dri] Found DRI library version 1.2.0 and kernel module version 1.28.0 (II) RADEON(0): AGP Fast Write disabled by default (II) Loading sub module "shadowfb" (II) LoadModule: "shadowfb" (II) Loading /usr/lib/xorg/modules/libshadowfb.so (II) Module shadowfb: vendor="X.Org Foundation" compiled for 7.1.1, module version = 1.0.0 ABI class: X.Org ANSI C Emulation, version 0.3 (II) RADEON(0): Page flipping disabled (II) RADEON(0): Will try to use DMA for Xv image transfers (II) RADEON(0): Generation 2 PCI interface, using max accessible memory (II) RADEON(0): Detected total video RAM=131072K, accessible=131072K (PCI BAR=131072K) (--) RADEON(0): Mapped VideoRAM: 131072 kByte (128 bit DDR SDRAM) (II) RADEON(0): Color tiling enabled by default (II) Loading sub module "ddc" (II) LoadModule: "ddc" (II) Loading /usr/lib/xorg/modules/libddc.so (II) Module ddc: vendor="X.Org Foundation" compiled for 7.1.1, module version = 1.0.0 ABI class: X.Org Video Driver, version 1.0 (II) Loading sub module "i2c" (II) LoadModule: "i2c" (II) Loading /usr/lib/xorg/modules/libi2c.so (II) Module i2c: vendor="X.Org Foundation" compiled for 7.1.1, module version = 1.2.0 ABI class: X.Org Video Driver, version 1.0 (II) RADEON(0): I2C bus "DDC" initialized. (II) RADEON(0): Legacy BIOS detected (II) RADEON(0): Connector0: DDCType-2, DACType-1, TMDSType-0, ConnectorType-3 (II) RADEON(0): Connector1: DDCType-3, DACType-0, TMDSType--1, ConnectorType-2 (II) RADEON(0): I2C device "DDC:ddc2" registered at address 0xA0. (II) RADEON(0): I2C device "DDC:ddc2" removed. (II) RADEON(0): I2C device "DDC:ddc2" registered at address 0xA0. (II) RADEON(0): I2C device "DDC:ddc2" removed. (II) RADEON(0): I2C device "DDC:ddc2" registered at address 0xA0. (II) RADEON(0): I2C device "DDC:ddc2" removed. (II) RADEON(0): DDC Type: 2, Detected Type: 0 (II) RADEON(0): I2C device "DDC:ddc2" registered at address 0xA0. (II) RADEON(0): I2C device "DDC:ddc2" removed. (II) RADEON(0): DDC Type: 3, Detected Type: 1 (II) RADEON(0): EDID data from the display on port 2----------------------- (II) RADEON(0): Manufacturer: SAM Model: 254 Serial#: 1146106418 (II) RADEON(0): Year: 2006 Week: 43 (II) RADEON(0): EDID Version: 1.3 (II) RADEON(0): Analog Display Input, Input Voltage Level: 0.700/0.300 V (II) RADEON(0): Sync: Separate Composite SyncOnGreen (II) RADEON(0): Max H-Image Size [cm]: horiz.: 47 vert.: 30 (II) RADEON(0): Gamma: 2.20 (II) RADEON(0): DPMS capabilities: Off; RGB/Color Display (II) RADEON(0): First detailed timing is preferred mode (II) RADEON(0): redX: 0.644 redY: 0.333 greenX: 0.286 greenY: 0.603 (II) RADEON(0): blueX: 0.152 blueY: 0.079 whiteX: 0.313 whiteY: 0.329 (II) RADEON(0): Supported VESA Video Modes: (II) RADEON(0): 720x400@70Hz (II) RADEON(0): 640x480@60Hz (II) RADEON(0): 640x480@67Hz (II) RADEON(0): 640x480@72Hz (II) RADEON(0): 640x480@75Hz (II) RADEON(0): 800x600@56Hz (II) RADEON(0): 800x600@60Hz (II) RADEON(0): 800x600@72Hz (II) RADEON(0): 800x600@75Hz (II) RADEON(0): 832x624@75Hz (II) RADEON(0): 1024x768@60Hz (II) RADEON(0): 1024x768@70Hz (II) RADEON(0): 1024x768@75Hz (II) RADEON(0): 1280x1024@75Hz (II) RADEON(0): 1152x870@75Hz (II) RADEON(0): Manufacturer's mask: 0 (II) RADEON(0): Supported Future Video Modes: (II) RADEON(0): #0: hsize: 1680 vsize 1050 refresh: 60 vid: 179 (II) RADEON(0): #1: hsize: 1280 vsize 1024 refresh: 60 vid: 32897 (II) RADEON(0): #2: hsize: 1280 vsize 960 refresh: 60 vid: 16513 (II) RADEON(0): #3: hsize: 1152 vsize 864 refresh: 75 vid: 20337 (II) RADEON(0): Supported additional Video Mode: (II) RADEON(0): clock: 146.2 MHz Image Size: 474 x 296 mm (II) RADEON(0): h_active: 1680 h_sync: 1784 h_sync_end 1960 h_blank_end 2240 h_border: 0 (II) RADEON(0): v_active: 1050 v_sync: 1053 v_sync_end 1059 v_blanking: 1089 v_border: 0 (II) RADEON(0): Ranges: V min: 56 V max: 75 Hz, H min: 30 H max: 81 kHz, PixClock max 170 MHz (II) RADEON(0): Monitor name: SyncMaster (II) RADEON(0): Serial No: HVFLA15682 (II) RADEON(0): (II) RADEON(0): Primary: Monitor -- CRT Connector -- VGA DAC Type -- Primary TMDS Type -- NONE DDC Type -- VGA_DDC (II) RADEON(0): Secondary: Monitor -- NONE Connector -- DVI-I DAC Type -- TVDAC/ExtDAC TMDS Type -- Internal DDC Type -- DVI_DDC (II) RADEON(0): PLL parameters: rf=2700 rd=12 min=20000 max=40000; xclk=20000 (WW) RADEON(0): Failed to detect secondary monitor, MergedFB/Clone mode disabled (==) RADEON(0): Using gamma correction (1.0, 1.0, 1.0) (II) RADEON(0): Validating modes on Primary head --------- (II) RADEON(0): Monitor0: Using hsync range of 30.00-81.00 kHz (II) RADEON(0): Monitor0: Using vrefresh range of 56.00-75.00 Hz (II) RADEON(0): Clock range: 20.00 to 400.00 MHz (II) RADEON(0): Not using mode "640x480" (vrefresh out of range) (II) RADEON(0): Not using mode "640x480" (vrefresh out of range) (II) RADEON(0): Not using mode "768x576" (vrefresh out of range) (II) RADEON(0): Not using mode "768x576" (vrefresh out of range) (II) RADEON(0): Not using mode "800x600" (vrefresh out of range) (II) RADEON(0): Not using default mode "640x350" (vrefresh out of range) (II) RADEON(0): Not using default mode "320x175" (bad mode clock/interlace/doublescan) (II) RADEON(0): Not using default mode "640x400" (vrefresh out of range) (II) RADEON(0): Not using default mode "320x200" (bad mode clock/interlace/doublescan) (II) RADEON(0): Not using default mode "720x400" (vrefresh out of range) (II) RADEON(0): Not using default mode "360x200" (bad mode clock/interlace/doublescan) (II) RADEON(0): Not using default mode "320x240" (bad mode clock/interlace/doublescan) (II) RADEON(0): Not using default mode "320x240" (bad mode clock/interlace/doublescan) (II) RADEON(0): Not using default mode "320x240" (bad mode clock/interlace/doublescan) (II) RADEON(0): Not using default mode "320x240" (bad mode clock/interlace/doublescan) (II) RADEON(0): Not using default mode "400x300" (bad mode clock/interlace/doublescan) (II) RADEON(0): Not using default mode "400x300" (vrefresh out of range) (II) RADEON(0): Not using default mode "512x384" (vrefresh out of range) (II) RADEON(0): Not using default mode "512x384" (bad mode clock/interlace/doublescan) (II) RADEON(0): Not using default mode "512x384" (bad mode clock/interlace/doublescan) (II) RADEON(0): Not using default mode "512x384" (bad mode clock/interlace/doublescan) (II) RADEON(0): Not using default mode "512x384" (bad mode clock/interlace/doublescan) (II) RADEON(0): Not using default mode "576x432" (bad mode clock/interlace/doublescan) (II) RADEON(0): Not using default mode "1280x960" (hsync out of range) (II) RADEON(0): Not using default mode "640x512" (bad mode clock/interlace/doublescan) (II) RADEON(0): Not using default mode "640x512" (bad mode clock/interlace/doublescan) (II) RADEON(0): Not using default mode "1280x1024" (hsync out of range) (II) RADEON(0): Not using default mode "640x512" (bad mode clock/interlace/doublescan) (WW) (1600x1200,Monitor0) mode clock 175.5MHz exceeds DDC maximum 170MHz (WW) (1600x1200,Monitor0) mode clock 189MHz exceeds DDC maximum 170MHz (II) RADEON(0): Not using default mode "1600x1200" (hsync out of range) (WW) (1600x1200,Monitor0) mode clock 202.5MHz exceeds DDC maximum 170MHz (II) RADEON(0): Not using default mode "1600x1200" (hsync out of range) (WW) (1600x1200,Monitor0) mode clock 229.5MHz exceeds DDC maximum 170MHz (II) RADEON(0): Not using default mode "1600x1200" (hsync out of range) (WW) (1792x1344,Monitor0) mode clock 204.8MHz exceeds DDC maximum 170MHz (II) RADEON(0): Not using default mode "1792x1344" (hsync out of range) (II) RADEON(0): Not using default mode "896x672" (bad mode clock/interlace/doublescan) (WW) (1792x1344,Monitor0) mode clock 261MHz exceeds DDC maximum 170MHz (II) RADEON(0): Not using default mode "1792x1344" (hsync out of range) (II) RADEON(0): Not using default mode "896x672" (bad mode clock/interlace/doublescan) (WW) (1856x1392,Monitor0) mode clock 218.3MHz exceeds DDC maximum 170MHz (II) RADEON(0): Not using default mode "1856x1392" (hsync out of range) (II) RADEON(0): Not using default mode "928x696" (bad mode clock/interlace/doublescan) (WW) (1856x1392,Monitor0) mode clock 288MHz exceeds DDC maximum 170MHz (II) RADEON(0): Not using default mode "1856x1392" (hsync out of range) (II) RADEON(0): Not using default mode "928x696" (bad mode clock/interlace/doublescan) (WW) (1920x1440,Monitor0) mode clock 234MHz exceeds DDC maximum 170MHz (II) RADEON(0): Not using default mode "1920x1440" (hsync out of range) (II) RADEON(0): Not using default mode "960x720" (bad mode clock/interlace/doublescan) (WW) (1920x1440,Monitor0) mode clock 297MHz exceeds DDC maximum 170MHz (II) RADEON(0): Not using default mode "1920x1440" (hsync out of range) (II) RADEON(0): Not using default mode "960x720" (bad mode clock/interlace/doublescan) (II) RADEON(0): Not using default mode "640x384" (bad mode clock/interlace/doublescan) (II) RADEON(0): Not using default mode "640x400" (bad mode clock/interlace/doublescan) (II) RADEON(0): Not using default mode "1152x768" (vrefresh out of range) (II) RADEON(0): Not using default mode "576x384" (bad mode clock/interlace/doublescan) (II) RADEON(0): Not using default mode "1152x864" (vrefresh out of range) (II) RADEON(0): Not using default mode "576x432" (bad mode clock/interlace/doublescan) (II) RADEON(0): Not using default mode "700x525" (bad mode clock/interlace/doublescan) (II) RADEON(0): Not using default mode "700x525" (bad mode clock/interlace/doublescan) (II) RADEON(0): Not using default mode "700x525" (bad mode clock/interlace/doublescan) (WW) (1400x1050,Monitor0) mode clock 184MHz exceeds DDC maximum 170MHz (II) RADEON(0): Not using default mode "1400x1050" (hsync out of range) (II) RADEON(0): Not using default mode "700x525" (bad mode clock/interlace/doublescan) (II) RADEON(0): Not using default mode "720x450" (bad mode clock/interlace/doublescan) (II) RADEON(0): Not using default mode "800x512" (bad mode clock/interlace/doublescan) (II) RADEON(0): Not using default mode "840x525" (bad mode clock/interlace/doublescan) (WW) (1920x1200,Monitor0) mode clock 193.16MHz exceeds DDC maximum 170MHz (II) RADEON(0): Not using default mode "960x600" (bad mode clock/interlace/doublescan) (WW) (1920x1200,Monitor0) mode clock 230MHz exceeds DDC maximum 170MHz (II) RADEON(0): Not using default mode "1920x1200" (hsync out of range) (II) RADEON(0): Not using default mode "960x600" (bad mode clock/interlace/doublescan) (WW) (1920x1440,Monitor0) mode clock 341.35MHz exceeds DDC maximum 170MHz (II) RADEON(0): Not using default mode "1920x1440" (hsync out of range) (II) RADEON(0): Not using default mode "960x720" (bad mode clock/interlace/doublescan) (WW) (2048x1536,Monitor0) mode clock 266.95MHz exceeds DDC maximum 170MHz (II) RADEON(0): Not using default mode "2048x1536" (hsync out of range) (WW) (2048x1536,Monitor0) mode clock 340.48MHz exceeds DDC maximum 170MHz (II) RADEON(0): Not using default mode "2048x1536" (hsync out of range) (WW) (2048x1536,Monitor0) mode clock 388.04MHz exceeds DDC maximum 170MHz (II) RADEON(0): Not using default mode "2048x1536" (hsync out of range) (II) RADEON(0): Not using default mode "1920x1200" (width too large for virtual size) (II) RADEON(0): Not using default mode "1600x1200" (width too large for virtual size) (II) RADEON(0): Not using default mode "1600x1200" (width too large for virtual size) (II) RADEON(0): Not using default mode "1680x1050" (width too large for virtual size) (II) RADEON(0): Not using default mode "1400x1050" (width too large for virtual size) (II) RADEON(0): Not using default mode "1400x1050" (width too large for virtual size) (II) RADEON(0): Not using default mode "1400x1050" (width too large for virtual size) (II) RADEON(0): Not using default mode "1280x1024" (width too large for virtual size) (II) RADEON(0): Not using default mode "1280x1024" (width too large for virtual size) (II) RADEON(0): Not using default mode "1440x900" (width too large for virtual size) (II) RADEON(0): Not using default mode "1280x960" (width too large for virtual size) (II) RADEON(0): Not using default mode "1280x800" (width too large for virtual size) (II) RADEON(0): Not using default mode "1152x864" (width too large for virtual size) (II) RADEON(0): Not using default mode "1280x768" (width too large for virtual size) (--) RADEON(0): Virtual size is 1024x768 (pitch 1024) (**) RADEON(0): *Mode "1024x768": 75.0 MHz, 56.5 kHz, 70.1 Hz (II) RADEON(0): Modeline "1024x768" 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync (**) RADEON(0): *Mode "800x600": 49.5 MHz, 46.9 kHz, 75.0 Hz (II) RADEON(0): Modeline "800x600" 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (**) RADEON(0): *Mode "640x480": 31.5 MHz, 37.5 kHz, 75.0 Hz (II) RADEON(0): Modeline "640x480" 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (**) RADEON(0): Default mode "832x624": 57.3 MHz, 49.7 kHz, 74.6 Hz (II) RADEON(0): Modeline "832x624" 57.28 832 864 928 1152 624 625 628 667 -hsync -vsync (**) RADEON(0): Mode "800x600": 50.0 MHz, 48.1 kHz, 72.2 Hz (II) RADEON(0): Modeline "800x600" 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync (**) RADEON(0): Mode "800x600": 40.0 MHz, 37.9 kHz, 60.3 Hz (II) RADEON(0): Modeline "800x600" 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (**) RADEON(0): Mode "768x576": 45.5 MHz, 45.1 kHz, 75.0 Hz (II) RADEON(0): Modeline "768x576" 45.51 768 808 888 1008 576 577 580 602 -hsync +vsync (**) RADEON(0): Mode "768x576": 42.9 MHz, 43.3 kHz, 72.0 Hz (II) RADEON(0): Modeline "768x576" 42.93 768 800 880 992 576 577 580 601 -hsync +vsync (**) RADEON(0): Mode "768x576": 35.0 MHz, 35.8 kHz, 60.0 Hz (II) RADEON(0): Modeline "768x576" 34.96 768 792 872 976 576 577 580 597 -hsync +vsync (**) RADEON(0): Mode "640x480": 25.2 MHz, 32.1 kHz, 63.1 Hz (II) RADEON(0): Modeline "640x480" 25.17 640 648 744 784 480 482 484 509 -hsync -vsync (**) RADEON(0): Default mode "416x312": 28.6 MHz, 49.7 kHz, 74.7 Hz (D) (II) RADEON(0): Modeline "416x312" 28.64 416 432 464 576 312 312 314 333 doublescan -hsync -vsync (**) RADEON(0): Default mode "400x300": 24.8 MHz, 46.9 kHz, 75.1 Hz (D) (II) RADEON(0): Modeline "400x300" 24.75 400 408 448 528 300 300 302 312 doublescan +hsync +vsync (**) RADEON(0): Default mode "400x300": 25.0 MHz, 48.1 kHz, 72.2 Hz (D) (II) RADEON(0): Modeline "400x300" 25.00 400 428 488 520 300 318 321 333 doublescan +hsync +vsync (**) RADEON(0): Default mode "400x300": 20.0 MHz, 37.9 kHz, 60.3 Hz (D) (II) RADEON(0): Modeline "400x300" 20.00 400 420 484 528 300 300 302 314 doublescan +hsync +vsync (--) RADEON(0): Display dimensions: (470, 300) mm (--) RADEON(0): DPI set to (55, 65) (II) Loading sub module "fb" (II) LoadModule: "fb" (II) Loading /usr/lib/xorg/modules/libfb.so (II) Module fb: vendor="X.Org Foundation" compiled for 7.1.1, module version = 1.0.0 ABI class: X.Org ANSI C Emulation, version 0.3 (==) RADEON(0): Using XAA acceleration architecture (II) Loading sub module "xaa" (II) LoadModule: "xaa" (II) Loading /usr/lib/xorg/modules/libxaa.so (II) Module xaa: vendor="X.Org Foundation" compiled for 7.1.1, module version = 1.2.0 ABI class: X.Org Video Driver, version 1.0 (II) RADEON(0): No MM_TABLE found - assuming CARD is not TV-in capable. (!!) RADEON(0): For information on using the multimedia capabilities of this adapter, please see http://gatos.sf.net. (II) do I need RAC? No, I don't. (II) resource ranges after preInit: [0] 0 0 0xfe9f0000 - 0xfe9fffff (0x10000) MX[B] [1] 0 0 0xe8000000 - 0xefffffff (0x8000000) MX[B] [2] -1 0 0x00100000 - 0x2fffffff (0x2ff00000) MX[B]E(B) [3] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B] [4] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B] [5] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B] [6] -1 0 0xfeaff000 - 0xfeafffff (0x1000) MX[B] [7] -1 0 0xfebff400 - 0xfebff4ff (0x100) MX[B] [8] -1 0 0xfebff800 - 0xfebff9ff (0x200) MX[B] [9] -1 0 0x30000000 - 0x300003ff (0x400) MX[B] [10] -1 0 0xfebffc00 - 0xfebfffff (0x400) MX[B] [11] -1 0 0xfc000000 - 0xfbffffff (0x0) MX[B]O [12] -1 0 0xf4000000 - 0xf7ffffff (0x4000000) MX[B](B) [13] -1 0 0xfe9e0000 - 0xfe9effff (0x10000) MX[B](B) [14] -1 0 0xe0000000 - 0xe7ffffff (0x8000000) MX[B](B) [15] -1 0 0xfe9c0000 - 0xfe9dffff (0x20000) MX[B](B) [16] -1 0 0xfe9f0000 - 0xfe9fffff (0x10000) MX[B](B) [17] -1 0 0xe8000000 - 0xefffffff (0x8000000) MX[B](B) [18] 0 0 0x000a0000 - 0x000affff (0x10000) MS[B](OprU) [19] 0 0 0x000b0000 - 0x000b7fff (0x8000) MS[B](OprU) [20] 0 0 0x000b8000 - 0x000bffff (0x8000) MS[B](OprU) [21] 0 0 0x0000c000 - 0x0000c0ff (0x100) IX[B] [22] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B] [23] -1 0 0x00000000 - 0x000000ff (0x100) IX[B] [24] -1 0 0x0000df00 - 0x0000df3f (0x40) IX[B] [25] -1 0 0x0000ee80 - 0x0000eebf (0x40) IX[B] [26] -1 0 0x0000e800 - 0x0000e8ff (0x100) IX[B] [27] -1 0 0x00000400 - 0x0000041f (0x20) IX[B] [28] -1 0 0x0000ef60 - 0x0000ef6f (0x10) IX[B] [29] -1 0 0x0000efa8 - 0x0000efab (0x4) IX[B] [30] -1 0 0x0000efa0 - 0x0000efa7 (0x8) IX[B] [31] -1 0 0x0000efac - 0x0000efaf (0x4) IX[B] [32] -1 0 0x0000efe0 - 0x0000efe7 (0x8) IX[B] [33] -1 0 0x0000fc00 - 0x0000fc0f (0x10) IX[B] [34] -1 0 0x0000ef80 - 0x0000ef9f (0x20) IX[B] [35] -1 0 0x0000ef40 - 0x0000ef5f (0x20) IX[B] [36] -1 0 0x0000ef20 - 0x0000ef3f (0x20) IX[B] [37] -1 0 0x0000ef00 - 0x0000ef1f (0x20) IX[B] [38] -1 0 0x0000c000 - 0x0000c0ff (0x100) IX[B](B) [39] 0 0 0x000003b0 - 0x000003bb (0xc) IS[B](OprU) [40] 0 0 0x000003c0 - 0x000003df (0x20) IS[B](OprU) (**) RADEON(0): RADEONScreenInit e8000000 0 (**) RADEON(0): Map: 0xe8000000, 0x08000000 (==) RADEON(0): Write-combining range (0xe8000000,0x8000000) (**) RADEON(0): RADEONSave (**) RADEON(0): RADEONSaveMode(0x81fe4a0) (**) RADEON(0): Read: 0x00000085 0x0002034a 0x00000007 (**) RADEON(0): Read: rd=133, fd=842, pd=2 (**) RADEON(0): RADEONSaveMode returns 0x81fe4a0 (==) RADEON(0): Using 16 bit depth buffer drmOpenDevice: node name is /dev/dri/card0 drmOpenDevice: open result is 7, (OK) drmOpenDevice: node name is /dev/dri/card0 drmOpenDevice: open result is 7, (OK) drmOpenByBusid: Searching for BusID pci:0000:01:00.0 drmOpenDevice: node name is /dev/dri/card0 drmOpenDevice: open result is 7, (OK) drmOpenByBusid: drmOpenMinor returns 7 drmOpenByBusid: drmGetBusid reports pci:0000:01:00.0 (II) RADEON(0): [drm] DRM interface version 1.3 (II) RADEON(0): [drm] created "radeon" driver at busid "pci:0000:01:00.0" (II) RADEON(0): [drm] added 8192 byte SAREA at 0xe0e65000 (II) RADEON(0): [drm] mapped SAREA 0xe0e65000 to 0xb7aff000 |
|
| Page 1 of 1 | All times are UTC - 6 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|