Author |
Message |
TVBox
|
Posted: Fri May 16, 2008 7:23 am |
|
Joined: Mon Apr 23, 2007 1:45 pm
Posts: 405
Location:
Fargo, ND, USA
|
|
Top |
|
|
Mephi
|
Posted: Mon May 19, 2008 3:15 pm |
|
Joined: Sat Feb 26, 2005 9:05 am
Posts: 160
Location:
Ipswich, UK
|
This is great, thanks
At some point (probably early august now) I'm going to be rebuilding my mythbox and one of the things I want to do to it is get the IR working with the receiver built into the case.
It's an Origen AE which apparently has an "mce compatible VFD/IR module"
http://www.origenae.com/en/accessory_vf110.htm
So I'll be trying to get that to work with my current MCE remote, and probably coming back here for advice
_________________ Mephi
-----------
R5.5
Opteron 2.Ghz
1Gb Ram, 200Gb Maxtor PATA
Avermedia 771 DVB-T
Hauppauge Nova-S2 (waiting to be installed)
MS MCE2 Remote
|
|
Top |
|
|
TVBox
|
Posted: Mon May 19, 2008 4:40 pm |
|
Joined: Mon Apr 23, 2007 1:45 pm
Posts: 405
Location:
Fargo, ND, USA
|
Mephi
I looked at your link. I have alway liked that X11 case but we can't get them here. As far as your remote goes not having to use sleep mode for power off is a lot simpler to get working correctly.
Information from your link.
Another key feature is the ability to switch your HTPC on from a totally off state (not just sleep mode, but OFF). This coupled with full mce compatibility make this the VFD of choice.
All of the MCE equipment transmit the same inferred codes and will say RC6ir some where on the hardware. The only area that varies is the USB receiver hardware descriptions (see Wiki Hardware Descriptions). Each manufacture has it's own code. If your hardware code is not one of the 25 we have supported I should be able to build you a working module if you provide me with the information I need. If you have new keys that are not defined I would like for you to submit them also so they can be added to the next release.
TVBox
_________________ TVBox LinHES R8.6.1
|
|
Top |
|
|
Mephi
|
Posted: Thu Aug 28, 2008 5:33 am |
|
Joined: Sat Feb 26, 2005 9:05 am
Posts: 160
Location:
Ipswich, UK
|
ok, I've finally started looking at this...
I've upgraded to R5.5, and I'm now ready to look at the remote reciever.
looking at lsusb I get:
Code: Bus 001 Device 004: ID 0403:fc60 Future Technology Devices International, Ltd Bus 001 Device 003: ID 0471:0815 Philips
The Philips one is the external reciever that came with the remote, the future technologies one is the internal case reciever.
_________________ Mephi
-----------
R5.5
Opteron 2.Ghz
1Gb Ram, 200Gb Maxtor PATA
Avermedia 771 DVB-T
Hauppauge Nova-S2 (waiting to be installed)
MS MCE2 Remote
|
|
Top |
|
|
TVBox
|
Posted: Thu Aug 28, 2008 11:20 am |
|
Joined: Mon Apr 23, 2007 1:45 pm
Posts: 405
Location:
Fargo, ND, USA
|
Mephi wrote: ok, I've finally started looking at this... I've upgraded to R5.5, and I'm now ready to look at the remote reciever. looking at lsusb I get: Code: Bus 001 Device 004: ID 0403:fc60 Future Technology Devices International, Ltd Bus 001 Device 003: ID 0471:0815 Philips The Philips one is the external receiver that came with the remote, the future technologies one is the internal case reciever.
Mephi
Dos your external receiver ID 0471:0815 Philips and remote work ? you should be able to plug it in and run /usr/local/bin/lirc-reconfig.sh as root. Make sure this works before moving on.
Because your new internal case receiver ID 0403:fc60 Future Technology Devices dos not exist in the current driver I modified the current driver with your information to test. PM me your email address so I can send you the beta files.
TVBox
_________________ TVBox LinHES R8.6.1
|
|
Top |
|
|
Mephi
|
Posted: Thu Aug 28, 2008 2:38 pm |
|
Joined: Sat Feb 26, 2005 9:05 am
Posts: 160
Location:
Ipswich, UK
|
Yep, the current reciever works fine, I ran lirc-reconfig.sh shortly after rebuilding the box and that's all great, it'd just be really good to use the other reciever.
PM is on it's way
_________________ Mephi
-----------
R5.5
Opteron 2.Ghz
1Gb Ram, 200Gb Maxtor PATA
Avermedia 771 DVB-T
Hauppauge Nova-S2 (waiting to be installed)
MS MCE2 Remote
|
|
Top |
|
|
Mephi
|
Posted: Fri Aug 29, 2008 3:12 am |
|
Joined: Sat Feb 26, 2005 9:05 am
Posts: 160
Location:
Ipswich, UK
|
ok, I've tried using those files and it doesn't work.
The process was:
1. Renamed old files 2. Copied new files over 3. unplugged old reciever 4. rebooted 5. Ran lirc-reconfig.sh 6. Rebooted
When I run lirc-reconfig.sh with the old reciever it recognises it and just runs, when I run it with the new one it doesn't recognise it, and it asks me to select the remote type, so I select MCE-new.
The appropriate bit of my /var/log/mythtv/lirc-reconfig.log file is:
Code: T: Bus=02 Lev=01 Prnt=01 Port=02 Cnt=02 Dev#= 6 Spd=12 MxCh= 0 D: Ver= 1.10 Cls=00(>ifc ) Sub=00 Prot=00 MxPS= 8 #Cfgs= 1 P: Vendor=0403 ProdID=fc60 Rev= 4.00 S: Manufacturer=MConsult S: Product=IRTrans USB S: SerialNumber=MMUN0000 C:* #Ifs= 1 Cfg#= 1 Atr=80 MxPwr= 50mA I:* If#= 0 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=ftdi_sio E: Ad=81(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms E: Ad=02(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms
If I plug in the old reciever and re-run lirc-reconfig.sh then the old reciever still works fine.
_________________ Mephi
-----------
R5.5
Opteron 2.Ghz
1Gb Ram, 200Gb Maxtor PATA
Avermedia 771 DVB-T
Hauppauge Nova-S2 (waiting to be installed)
MS MCE2 Remote
|
|
Top |
|
|
TVBox
|
Posted: Sat Aug 30, 2008 12:01 pm |
|
Joined: Mon Apr 23, 2007 1:45 pm
Posts: 405
Location:
Fargo, ND, USA
|
Mephi
have sent updated files
can you send me a link to your hardware manufacturer page.
according to your previous post your hardware has already loaded Driver=ftdi_sio
We should be seeing lirc_mod_mce. I am guessing this is for you VFD.
> modinfo ftdi_sio
filename: /lib/modules/2.6.23-chw-4/kernel/drivers/usb/serial/ftdi_sio.ko
license: GPL
description: USB FTDI Serial Converters Driver
author: Greg Kroah-Hartman <greg@kroah.com>, Bill Ryder <bryder@sgi.com>, Kuba Ober <kuba@mareimbrium.org>
alias: usb:v0403pFC60d*dc*dsc*dp*ic*isc*ip*
/lib/modules/2.6.22-chw-5/modules.usbmap
usb module........match_flags........idVendor........idProduct
ftdi_sio...............0x0003...............0x0403..........0xfc60
http://www.ftdichip.com/Products/EvaluationKits/USB-Serial.htm
post the pertinent information for
lsusb -v
cat /proc/bus/usb/devices
modinfo lirc_mod_mce
lsmod | grep lirc
TVBox
_________________ TVBox LinHES R8.6.1
|
|
Top |
|
|
TVBox
|
Posted: Sun Aug 31, 2008 1:56 am |
|
Joined: Mon Apr 23, 2007 1:45 pm
Posts: 405
Location:
Fargo, ND, USA
|
Mephi
Are we trying to setup a OrigenAE VF110 VFD/IR module?
I found this statment
http://www.origenae.com/downloads/manuals/vf110_user_guide.pdf
Using LIRC Clients
Every LIRC client can be used with IRTrans. The IRTrans server implements a standard LIRC application
socket (only LINUX) and a standard LIRC TCP/IP socket to be compatible with LIRC. Every LIRC
client can be used with IRTrans. Using LIRC clients you can remotecontrol your PC and send commands.
Only the learning of commands has to be done through the GUI or ASCII client as the LIRC protocol does not
support learning of commands.
The irserver completely replaces lircd. That means that the LIRC server (lircd) should not run on the
system.
There can be several LIRC and IRTrans clients connected to the server at the same time. The TCP/IP socket
allows connections from different clients over the network. A very versatile client is irexec, delivered with
LIRC. It allows executing any command triggered by an IR command received by IRTrans. It is also possible
to send commands. That can be used to store complex commands: Switch on your Receiver and TV if you
start the DVD player on the PC …
The IRTrans Server is fully compatible with the LINUX VDR system. It is used in the same way as LIRC. Of
course you have to learn your commands the right way, because the name of the commands is fixed
inside VDR.
http://www.irtrans.de/en/main.php
It looks like you have to install proprietary software.
http://www.irtrans.de/en/download/linux.php
Convert back to the original files. (non of the files I sent you will work) It appears that your hardware dos not use the lirc_mceusb2 module like all of the other MCE remotes. I will send you the lirc source code for 5.5 You will need it to install your IRTrans software. Past that I haven't a clue to what we need to do to get it to work. Do you have your VFD working?
TVBox
_________________ TVBox LinHES R8.6.1
|
|
Top |
|
|
roofchop
|
Posted: Thu Sep 04, 2008 6:14 am |
|
Joined: Sat Jan 26, 2008 10:28 pm
Posts: 53
Location:
Montreal, Canada
|
I tried to get my keyboard to work many times in R5F27, and many other distros and was never successful. Now it "just works".....but the buttons along each side of the keyboard cause the screen to go black, kind of like a Vista thing. All the keyboard keys work great. I read over the wiki page and I didn't see anything jump out at me.
Thanks,
roofchop
_________________ roofchop
KnoppMyth R6, Antec Fusion, Asus P4P800-VM, Pentium 2.8Ghz, OCZ 2x1Gb RAM, 500Gb SATA, Hauppauge 2 PVR-150MCE, Nvidia GeForce 5600, Samsung SyncMaster 225BW (VGA), Optoma HD65 Projector (DVI)....
|
|
Top |
|
|
TVBox
|
Posted: Thu Sep 04, 2008 9:20 pm |
|
Joined: Mon Apr 23, 2007 1:45 pm
Posts: 405
Location:
Fargo, ND, USA
|
roofchop wrote: The buttons along each side of the keyboard cause the screen to go black
What remote / receiver / keyboard are you using are you using now?
Post the folowing that pertain to your hardware
Code: lsmod | grep lirc
lsusb
cat /proc/bus/usb/devices
TVBox
_________________ TVBox LinHES R8.6.1
Last edited by TVBox on Fri Sep 05, 2008 11:06 pm, edited 1 time in total.
|
|
Top |
|
|
roofchop
|
Posted: Fri Sep 05, 2008 7:29 am |
|
Joined: Sat Jan 26, 2008 10:28 pm
Posts: 53
Location:
Montreal, Canada
|
I am using the "Philips eHome Infrared Transeiver" with the mce keyboard (model 1044), and then I use a Harmony remote trained by the keyboard. I do have another receiver in a box somewhere if you think that would help. Here's the output of lsmod and lsusb. I do have a usb drive plugged in right now and the imon is the big volume knob on my Antec Fusion case, which doesn't work yet, but would be nice to get it working too eventually. Here's the output of lsmod and lsusb:
Code: sh-3.1$lsmod | grep lirc lirc_imon 20616 0 lirc_mod_mce 18948 1 lirc_dev 16132 2 lirc_imon, lirc_mod_mce usbcore 125448 8 usbhid, ohci_hcd, lirc_imon, lirc_mod_mce, usb_storage, uhci_hcd, ehci_hcd
sh-3.1$lsusb Bus 005 Device 002: ID 15c2:ffdc SoundGraph Inc. iMON PAD Remote Controller Bus 005 Device 001: ID 0000:0000 Bus 003 Device 002: ID 0471:0815 Philips Bus 003 Device 001: ID 0000:0000 Bus 001 Device 003: ID 05e3:0702 Genesys Logic, Inc. USB 2.0 IDE adapter Bus 001 Device 001: ID 0000:0000 Bus 004 Device 001: ID 0000:0000 Bus 002 Device 001: ID 0000:0000
Thanks for the help, I hope this is the information needed.
roofchop
_________________ roofchop
KnoppMyth R6, Antec Fusion, Asus P4P800-VM, Pentium 2.8Ghz, OCZ 2x1Gb RAM, 500Gb SATA, Hauppauge 2 PVR-150MCE, Nvidia GeForce 5600, Samsung SyncMaster 225BW (VGA), Optoma HD65 Projector (DVI)....
|
|
Top |
|
|
TVBox
|
Posted: Sat Sep 06, 2008 12:37 am |
|
Joined: Mon Apr 23, 2007 1:45 pm
Posts: 405
Location:
Fargo, ND, USA
|
|
Top |
|
|
roofchop
|
Posted: Sat Sep 06, 2008 7:35 am |
|
Joined: Sat Jan 26, 2008 10:28 pm
Posts: 53
Location:
Montreal, Canada
|
Thanks for the help TVBox and getting the MCE stuff to work with KM. I still really like the MCE keyboard. I have looked at those other pages and am hoping eventually to get everything working. I did setup the LCD yesterday.
I have been having some strange video issues using the VGA to my LCD monitor and DVI to my projector. Among other things, I discovered that the only the monitor blacks out when I push one of the "remote keys" on the keyboard not the projector, and still if I use the "keyboard keys", everything works responds great. I will post elsewhere if I can't fix the video problems.
_________________ roofchop
KnoppMyth R6, Antec Fusion, Asus P4P800-VM, Pentium 2.8Ghz, OCZ 2x1Gb RAM, 500Gb SATA, Hauppauge 2 PVR-150MCE, Nvidia GeForce 5600, Samsung SyncMaster 225BW (VGA), Optoma HD65 Projector (DVI)....
|
|
Top |
|
|
TVBox
|
Posted: Sat Sep 06, 2008 12:31 pm |
|
Joined: Mon Apr 23, 2007 1:45 pm
Posts: 405
Location:
Fargo, ND, USA
|
Quote: roofchop the monitor blacks out when I push one of the "remote keys"
The first thing I would do is to unplug the Imon equipment and reboot to see if all of your MCE equipment functions correctly. My experience with two loaded lirc modules is that you will have problems. Thats the problem that this link corrects.
http://www.mythtv.org/wiki/index.php/Volume_Knob_on_Antec_Fusion
Your hardware. You have two remote control receivers loaded if you had a Hauppauge PVR-150 you would have another one but you you have a Hauppauge PVR-150mce that has no receiver.
Philips eHome Infrared Transeiver .......................ID 0471 : 0815
SoundGraph Inc. iMON PAD Remote Controller ... ID 15c2 : ffdc
The steps you remote problems.
1. create file /etc/udev/rules.d/lirc.rules and copy the following code to it
KERNEL=="lirc[0-9]*", SYSFS{idVendor}=="0471", SYMLINK+="lirc_mce"
KERNEL=="lirc[0-9]*", SYSFS{idVendor}=="15c2", SYMLINK+="lirc_imon"
2. Edit /etc/lirc/hardware.conf and add this to the bottom of the code.
# Options to lircd
LIRCD_OPTIONS="--driver=default --device=/dev/lirc_mce --output=/dev/lircd --pidfile=/var/run/lircd.pid --connect=localhost:8765"
LIRCD1_OPTIONS="--driver=default --device=/dev/lirc_imon --output=/dev/lircd1 --pidfile=/var/run/lircd1.pid --listen"
3. This is where the problems begin. /etc/init.d/lircd dos not exist but /etc/init.d/lirc dos.
Do you have webmin functional so you can do some searches?
TVBox
_________________ TVBox LinHES R8.6.1
|
|
Top |
|
|