LinHES Forums http://forums.linhes.org/ |
|
UG: soft lockup - CPU#0 stuck for 11s! [Xorg:5795] http://forums.linhes.org/viewtopic.php?f=2&t=18987 |
Page 1 of 1 |
Author: | diblasio [ Mon Sep 22, 2008 10:48 pm ] |
Post subject: | UG: soft lockup - CPU#0 stuck for 11s! [Xorg:5795] |
I am having trouble getting fluid HD playback on my newly upgraded mythbox. Set Nvagp to 2 in my xorg config and now get this Code: Pid: 5683, comm: Xorg
EIP: 0060:[<fa1e49e0>] CPU: 0 EIP is at _nv003993rm+0x23/0x24 [nvidia] EFLAGS: 00003216 Tainted: P (2.6.23-chw-4 #1) EAX: d441c280 EBX: f53de800 ECX: 00009400 EDX: fa600000 ESI: 00009400 EDI: f78b5000 EBP: f783de30 DS: 007b ES: 007b FS: 00d8 CR0: 8005003b CR2: b633476c CR3: 36c9d000 CR4: 00000690 DR0: 00000000 DR1: 00000000 DR2: 00000000 DR3: 00000000 DR6: ffff0ff0 DR7: 00000400 [<fa1a48fc>] _nv008244rm+0x70/0x95 [nvidia] [<fa252094>] _nv001588rm+0x3f/0x19a [nvidia] [<fa251126>] _nv001607rm+0xc0/0x102 [nvidia] [<fa1a703a>] _nv008727rm+0xdf/0x1a4 [nvidia] [<fa1723dc>] _nv005624rm+0x6f/0x9d [nvidia] [<fa0ab59a>] _nv009496rm+0x6c/0x163 [nvidia] [<fa0a99f3>] _nv009503rm+0x50d/0x5a1 [nvidia] [<fa0986f1>] _nv009501rm+0x91d/0xbe5 [nvidia] [<fa098a2b>] _nv009499rm+0x72/0x8b [nvidia] [<fa189171>] _nv002999rm+0x15f/0x171 [nvidia] [<fa18159d>] _nv005224rm+0x4b/0x72 [nvidia] [<fa0469c9>] _nv002985rm+0x2d1/0x5fd [nvidia] [<fa1ea005>] rm_ioctl+0x3e/0x6d [nvidia] [<fa28edd6>] nv_kern_ioctl+0x116/0x3c0 [nvidia] [<fa28f0b8>] nv_kern_unlocked_ioctl+0x18/0x20 [nvidia] [<fa28f0a0>] nv_kern_unlocked_ioctl+0x0/0x20 [nvidia] [<c019188b>] do_ioctl+0x2b/0x90 [<c0191b1e>] vfs_ioctl+0x22e/0x2b0 [<c0191bfd>] sys_ioctl+0x5d/0x70 [<c0104412>] syscall_call+0x7/0xb ======================= mythfrontend[5754]: segfault at 00000001 eip 0842f580 esp b19a220c error 4 BUG: soft lockup - CPU#0 stuck for 11s! [Xorg:5795] I have tried nvagp 3 as well with simular results. |
Author: | diblasio [ Mon Sep 22, 2008 10:50 pm ] |
Post subject: | |
Full dmesg Code: mythtv@mythtv:~$ dmesg
Linux version 2.6.23-chw-4 (root@mbe.mysettopbox.tv) (gcc version 4.2.3 20071123 (prerelease) (Debian 4.2.2-4)) #1 SMP PREEMPT Mon May 26 14:44:56 PDT 2008 BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 000000000009fc00 (usable) BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved) BIOS-e820: 00000000000e4000 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 000000005ff30000 (usable) BIOS-e820: 000000005ff30000 - 000000005ff40000 (ACPI data) BIOS-e820: 000000005ff40000 - 000000005fff0000 (ACPI NVS) BIOS-e820: 000000005fff0000 - 0000000060000000 (reserved) BIOS-e820: 00000000fff80000 - 0000000100000000 (reserved) 639MB HIGHMEM available. 896MB LOWMEM available. found SMP MP-table at 000ff780 Entering add_active_range(0, 0, 393008) 0 entries of 256 used Zone PFN ranges: DMA 0 -> 4096 Normal 4096 -> 229376 HighMem 229376 -> 393008 Movable zone start PFN for each node early_node_map[1] active PFN ranges 0: 0 -> 393008 On node 0 totalpages: 393008 DMA zone: 32 pages used for memmap DMA zone: 0 pages reserved DMA zone: 4064 pages, LIFO batch:0 Normal zone: 1760 pages used for memmap Normal zone: 223520 pages, LIFO batch:31 HighMem zone: 1278 pages used for memmap HighMem zone: 162354 pages, LIFO batch:31 Movable zone: 0 pages used for memmap DMI 2.3 present. ACPI: RSDP 000FA8C0, 0014 (r0 ACPIAM) ACPI: RSDT 5FF30000, 0030 (r1 A M I OEMRSDT 11000327 MSFT 97) ACPI: FACP 5FF30200, 0081 (r1 A M I OEMFACP 11000327 MSFT 97) ACPI: DSDT 5FF303E0, 36C4 (r1 K8V__ K8V__075 75 MSFT 100000D) ACPI: FACS 5FF40000, 0040 ACPI: APIC 5FF30390, 004A (r1 A M I OEMAPIC 11000327 MSFT 97) ACPI: OEMB 5FF40040, 003F (r1 A M I OEMBIOS 11000327 MSFT 97) ACPI: PM-Timer IO Port: 0x808 ACPI: Local APIC address 0xfee00000 ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) Processor #0 15:4 APIC version 16 ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0]) IOAPIC[0]: apic_id 1, version 3, address 0xfec00000, GSI 0-23 ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) ACPI: IRQ0 used by override. ACPI: IRQ2 used by override. ACPI: IRQ9 used by override. Enabling APIC mode: Flat. Using 1 I/O APICs Using ACPI (MADT) for SMP configuration information Allocating PCI resources starting at 70000000 (gap: 60000000:9ff80000) swsusp: Registered nosave memory region: 000000000009f000 - 00000000000a0000 swsusp: Registered nosave memory region: 00000000000a0000 - 00000000000e4000 swsusp: Registered nosave memory region: 00000000000e4000 - 0000000000100000 Built 1 zonelists in Zone order. Total pages: 389938 Kernel command line: auto BOOT_IMAGE=Linux ro root=301 splash=silent apm=power-off nomce quiet SELINUX_INIT=NO bootsplash: silent mode. mapped APIC to ffffb000 (fee00000) mapped IOAPIC to ffffa000 (fec00000) Enabling fast FPU save and restore... done. Enabling unmasked SIMD FPU exception support... done. Initializing CPU#0 PID hash table entries: 4096 (order: 12, 16384 bytes) Detected 2002.660 MHz processor. Console: colour dummy device 80x25 console [tty0] enabled Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) Memory: 1550940k/1572032k available (4519k kernel code, 20000k reserved, 1529k data, 308k init, 654528k highmem) virtual kernel memory layout: fixmap : 0xffe14000 - 0xfffff000 (1964 kB) pkmap : 0xff800000 - 0xffc00000 (4096 kB) vmalloc : 0xf8800000 - 0xff7fe000 ( 111 MB) lowmem : 0xc0000000 - 0xf8000000 ( 896 MB) .init : 0xc06f1000 - 0xc073e000 ( 308 kB) .data : 0xc0569ef4 - 0xc06e837c (1529 kB) .text : 0xc0100000 - 0xc0569ef4 (4519 kB) Checking if this processor honours the WP bit even in supervisor mode... Ok. Calibrating delay using timer specific routine.. 4008.03 BogoMIPS (lpj=2004019) Security Framework v1.0.0 initialized Capability LSM initialized Mount-cache hash table entries: 512 CPU: After generic identify, caps: 078bfbff e1d3fbff 00000000 00000000 00000000 00000000 00000000 00000000 CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) CPU: L2 Cache: 512K (64 bytes/line) CPU: After all inits, caps: 078bfbff e1d3fbff 00000000 00000410 00000000 00000000 00000000 00000000 Compat vDSO mapped to ffffe000. Checking 'hlt' instruction... OK. SMP alternatives: switching to UP code Freeing SMP alternatives: 19k freed ACPI: Core revision 20070126 CPU0: AMD Athlon(tm) 64 Processor 3000+ stepping 08 Total of 1 processors activated (4008.03 BogoMIPS). ENABLING IO-APIC IRQs ..TIMER: vector=0x31 apic1=0 pin1=2 apic2=0 pin2=0 Brought up 1 CPUs xor: automatically using best checksumming function: pIII_sse pIII_sse : 5780.000 MB/sec xor: using function: pIII_sse (5780.000 MB/sec) NET: Registered protocol family 16 ACPI: bus type pci registered PCI: PCI BIOS revision 2.10 entry at 0xf0031, last bus=1 PCI: Using configuration type 1 Setting up standard PCI resources ACPI: EC: Look up EC in DSDT ACPI: Interpreter enabled ACPI: (supports S0 S1 S3 S4 S5) ACPI: Using IOAPIC for interrupt routing ACPI: PCI Root Bridge [PCI0] (0000:00) Force enabled HPET at base address 0xfed00000 PCI: enabled onboard AC97/MC97 devices ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 7 10 *11 14 15) ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 7 *10 11 14 15) ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 *5 7 10 11 14 15) ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 7 10 11 14 15) *0, disabled. ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 7 10 11 14 15) *0, disabled. ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 7 10 11 14 15) *0, disabled. ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 7 10 11 14 15) *0, disabled. ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 7 10 11 14 15) *0, disabled. Linux Plug and Play Support v0.97 (c) Adam Belay pnp: PnP ACPI init ACPI: bus type pnp registered pnp: PnP ACPI: found 12 devices ACPI: ACPI bus type pnp unregistered PnPBIOS: Disabled by ACPI PNP SCSI subsystem initialized libata version 2.21 loaded. PCI: Using ACPI for IRQ routing PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report hpet clockevent registered hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0 hpet0: 3 32-bit timers, 14318180 Hz ACPI: RTC can wake from S4 Time: tsc clocksource has been installed. pnp: 00:08: iomem range 0xfec00000-0xfec00fff has been reserved pnp: 00:08: iomem range 0xfee00000-0xfee00fff has been reserved pnp: 00:08: iomem range 0xfff80000-0xffffffff could not be reserved pnp: 00:0b: iomem range 0x0-0x9ffff could not be reserved pnp: 00:0b: iomem range 0xc0000-0xdffff could not be reserved pnp: 00:0b: iomem range 0xe0000-0xfffff could not be reserved pnp: 00:0b: iomem range 0x100000-0x5ffeffff could not be reserved PCI: Bridge: 0000:00:01.0 IO window: disabled. MEM window: f3100000-f72fffff PREFETCH window: e3000000-f2ffffff PCI: Setting latency timer of device 0000:00:01.0 to 64 NET: Registered protocol family 2 IP route cache hash table entries: 32768 (order: 5, 131072 bytes) TCP established hash table entries: 131072 (order: 9, 2097152 bytes) TCP bind hash table entries: 65536 (order: 7, 786432 bytes) TCP: Hash tables configured (established 131072 bind 65536) TCP reno registered checking if image is initramfs...it isn't (no cpio magic); looks like an initrd Freeing initrd memory: 111k freed audit: initializing netlink socket (disabled) audit(1222143719.189:1): initialized highmem bounce pool size: 64 pages Total HugeTLB memory allocated, 0 VFS: Disk quotas dquot_6.5.1 Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) JFS: nTxBlock = 8192, nTxLock = 65536 SGI XFS with ACLs, security attributes, realtime, large block numbers, no debug enabled SGI XFS Quota Management subsystem async_tx: api initialized (async) io scheduler noop registered io scheduler anticipatory registered io scheduler deadline registered (default) io scheduler cfq registered PCI: VIA PCI bridge detected. Disabling DAC. Boot video device is 0000:01:00.0 vesafb: framebuffer at 0xe8000000, mapped to 0xf8d00000, using 3750k, total 131072k vesafb: mode is 800x600x16, linelength=1600, pages=2 vesafb: protected mode interface info at c000:d240 vesafb: pmi: set display start = c00cd276, set palette = c00cd2e0 vesafb: pmi: ports = 3b4 3b5 3ba 3c0 3c1 3c4 3c5 3c6 3c7 3c8 3c9 3cc 3ce 3cf 3d0 3d1 3d2 3d3 3d4 3d5 3da vesafb: scrolling: redraw vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0 bootsplash 3.1.6-2004/03/31: looking for picture...<6> silentjpeg size 45842 bytes,<6>...found (800x600, 21500 bytes, v3). Console: switching to colour frame buffer device 75x24 fb0: VESA VGA frame buffer device isapnp: Scanning for PnP cards... isapnp: No Plug & Play device found Floppy drive(s): fd0 is 1.44M FDC 0 is a post-1991 82077 RAMDISK driver initialized: 16 RAM disks of 4096K size 1024 blocksize loop: module loaded pcnet32.c:v1.33 27.Jun.2006 tsbogend@alpha.franken.de e100: Intel(R) PRO/100 Network Driver, 3.5.23-k4-NAPI e100: Copyright(c) 1999-2006 Intel Corporation ns83820.c: National Semiconductor DP83820 10/100/1000 driver. ACPI: PCI Interrupt 0000:00:0a.0[A] -> GSI 17 (level, low) -> IRQ 16 skge 1.11 addr 0xf7c00000 irq 16 chip Yukon rev 1 skge eth0: addr 00:0e:a6:4e:8f:9d sk98lin: driver has been replaced by the skge driver and is scheduled for removal forcedeth.c: Reverse Engineered nForce ethernet driver. Version 0.60. dmfe: Davicom DM9xxx net driver, version 1.36.4 (2002-01-17) winbond-840.c:v1.01-e (2.4 port) Sep-11-2006 Donald Becker <becker@scyld.com> http://www.scyld.com/network/drivers.html uli526x: ULi M5261/M5263 net driver, version 0.9.3 (2005-7-29) input: Macintosh mouse button emulation as /class/input/input0 Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx VP_IDE: IDE controller at PCI slot 0000:00:0f.1 ACPI: PCI Interrupt 0000:00:0f.1[A] -> GSI 20 (level, low) -> IRQ 17 VP_IDE: chipset revision 6 VP_IDE: not 100% native mode: will probe irqs later VP_IDE: VIA vt8237 (rev 00) IDE UDMA133 controller on pci0000:00:0f.1 ide0: BM-DMA at 0xfc00-0xfc07, BIOS settings: hda:DMA, hdb:pio ide1: BM-DMA at 0xfc08-0xfc0f, BIOS settings: hdc:DMA, hdd:pio Probing IDE interface ide0... hda: WDC WD3200JB-00KFA0, ATA DISK drive hda: selected mode 0x45 ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 Probing IDE interface ide1... hdc: PLEXTOR DVDR PX-716A, ATAPI CD/DVD-ROM drive hdc: selected mode 0x44 ide1 at 0x170-0x177,0x376 on irq 15 hda: max request size: 512KiB hda: 625142448 sectors (320072 MB) w/8192KiB Cache, CHS=38913/255/63, UDMA(100) hda: cache flushes supported hda: hda1 hda2 hda3 hdc: ATAPI 40X DVD-ROM DVD-R CD-R/RW drive, 8192kB Cache, UDMA(66) Uniform CD-ROM driver Revision: 3.20 Loading iSCSI transport class v2.0-724. sata_promise 0000:00:08.0: version 2.10 ACPI: PCI Interrupt 0000:00:08.0[A] -> GSI 18 (level, low) -> IRQ 18 scsi0 : sata_promise scsi1 : sata_promise scsi2 : sata_promise ata1: SATA max UDMA/133 cmd 0xf8cfe200 ctl 0xf8cfe238 bmdma 0x00000000 irq 18 ata2: SATA max UDMA/133 cmd 0xf8cfe280 ctl 0xf8cfe2b8 bmdma 0x00000000 irq 18 ata3: PATA max UDMA/133 cmd 0xf8cfe300 ctl 0xf8cfe338 bmdma 0x00000000 irq 18 ata1: SATA link down (SStatus 0 SControl 300) ata2: SATA link down (SStatus 0 SControl 0) sata_via 0000:00:0f.0: version 2.3 ACPI: PCI Interrupt 0000:00:0f.0[B] -> GSI 20 (level, low) -> IRQ 17 sata_via 0000:00:0f.0: routed to hard irq line 10 scsi3 : sata_via scsi4 : sata_via ata4: SATA max UDMA/133 cmd 0x0001e800 ctl 0x0001e402 bmdma 0x0001d400 irq 17 ata5: SATA max UDMA/133 cmd 0x0001e000 ctl 0x0001d802 bmdma 0x0001d408 irq 17 ata4: SATA link down 1.5 Gbps (SStatus 0 SControl 300) ata5: SATA link down 1.5 Gbps (SStatus 0 SControl 300) PNP: No PS/2 controller found. Probing ports directly. serio: i8042 KBD port at 0x60,0x64 irq 1 serio: i8042 AUX port at 0x60,0x64 irq 12 mice: PS/2 mouse device common for all mice md: linear personality registered for level -1 md: raid0 personality registered for level 0 md: raid1 personality registered for level 1 raid6: int32x1 691 MB/s raid6: int32x2 796 MB/s raid6: int32x4 761 MB/s raid6: int32x8 488 MB/s raid6: mmxx1 1585 MB/s raid6: mmxx2 2914 MB/s raid6: sse1x1 1160 MB/s raid6: sse1x2 1679 MB/s raid6: sse2x1 1656 MB/s raid6: sse2x2 3406 MB/s raid6: using algorithm sse2x2 (3406 MB/s) md: raid6 personality registered for level 6 md: raid5 personality registered for level 5 md: raid4 personality registered for level 4 device-mapper: ioctl: 4.11.0-ioctl (2006-10-12) initialised: dm-devel@redhat.com NET: Registered protocol family 1 NET: Registered protocol family 15 Using IPI No-Shortcut mode md: Autodetecting RAID arrays. md: autorun ... md: ... autorun DONE. RAMDISK: Compressed image found at block 0 VFS: Mounted root (ext2 filesystem). (fs/jbd/recovery.c, 255): journal_recover: JBD: recovery, exit status 0, recovered transactions 595944 to 596169 (fs/jbd/recovery.c, 257): journal_recover: JBD: Replayed 1264 and revoked 4/10 blocks kjournald starting. Commit interval 5 seconds EXT3 FS on hda1, internal journal EXT3-fs: recovery complete. EXT3-fs: mounted filesystem with ordered data mode. Freeing unused kernel memory: 308k freed usbcore: registered new interface driver usbfs usbcore: registered new interface driver hub usbcore: registered new device driver usb Linux agpgart interface v0.102 agpgart: Detected AGP bridge 0 agpgart: AGP aperture is 64M @ 0xf8000000 pci_hotplug: PCI Hot Plug PCI Core version: 0.5 shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 USB Universal Host Controller Interface driver v3.0 ACPI: PCI Interrupt 0000:00:10.0[A] -> GSI 21 (level, low) -> IRQ 19 uhci_hcd 0000:00:10.0: UHCI Host Controller uhci_hcd 0000:00:10.0: new USB bus registered, assigned bus number 1 uhci_hcd 0000:00:10.0: irq 19, io base 0x0000b400 usb usb1: configuration #1 chosen from 1 choice hub 1-0:1.0: USB hub found hub 1-0:1.0: 2 ports detected ACPI: PCI Interrupt 0000:00:10.1[A] -> GSI 21 (level, low) -> IRQ 19 uhci_hcd 0000:00:10.1: UHCI Host Controller uhci_hcd 0000:00:10.1: new USB bus registered, assigned bus number 2 uhci_hcd 0000:00:10.1: irq 19, io base 0x0000b800 usb usb2: configuration #1 chosen from 1 choice hub 2-0:1.0: USB hub found hub 2-0:1.0: 2 ports detected b2c2-flexcop: B2C2 FlexcopII/II(b)/III digital TV receiver chip loaded successfully ACPI: PCI Interrupt 0000:00:10.4[C] -> GSI 21 (level, low) -> IRQ 19 ehci_hcd 0000:00:10.4: EHCI Host Controller ehci_hcd 0000:00:10.4: new USB bus registered, assigned bus number 3 ehci_hcd 0000:00:10.4: irq 19, io mem 0xf7f00000 ehci_hcd 0000:00:10.4: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 usb usb3: configuration #1 chosen from 1 choice hub 3-0:1.0: USB hub found hub 3-0:1.0: 8 ports detected input: Power Button (FF) as /class/input/input1 ACPI: Power Button (FF) [PWRF] input: Power Button (CM) as /class/input/input2 ACPI: Power Button (CM) [PWRB] input: Sleep Button (CM) as /class/input/input3 ACPI: Sleep Button (CM) [SLPB] ACPI: PCI Interrupt 0000:00:07.0[A] -> GSI 16 (level, low) -> IRQ 20 rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0 rtc0: alarms up to one year, y3k input: PC Speaker as /class/input/input4 ohci1394: fw-host0: Get PHY Reg timeout [0x00008400/0x00000000/100] ohci1394: fw-host0: Set PHY Reg timeout [0x000044c0/0x00004000/100] ohci1394: fw-host0: OHCI-1394 1.0 (PCI): IRQ=[20] MMIO=[f7900000-f79007ff] Max Packet=[2] IR/IT contexts=[4/8] ohci1394: fw-host0: Get PHY Reg timeout [0x00008200/0x00000000/100] ohci1394: fw-host0: Serial EEPROM has suspicious values, attempting to set max_packet_size to 512 bytes flexcop-pci: will use the HW PID filter. flexcop-pci: card revision 2 ACPI: PCI Interrupt 0000:00:0c.0[A] -> GSI 17 (level, low) -> IRQ 16 DVB: registering new adapter (FlexCop Digital TV device) b2c2-flexcop: MAC address = 00:d0:d7:0e:a6:97 parport_pc 00:06: reported by Plug and Play ACPI parport0: PC-style at 0x378, irq 7 [PCSPP] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing disabled serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A b2c2-flexcop: i2c master_xfer failed 00:09: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A 00:0a: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A b2c2-flexcop: i2c master_xfer failed b2c2-flexcop: i2c master_xfer failed mt352_read_register: readreg error (reg=127, ret==-121) b2c2-flexcop: i2c master_xfer failed nxt200x: nxt200x_readbytes: i2c read error (addr 0x0a, err == -121) Unknown/Unsupported NXT chip: 00 00 00 00 00 b2c2-flexcop: found the lgdt3303 at i2c address: 0x59 DVB: registering frontend 0 (LG Electronics LGDT3303 VSB/QAM Frontend)... b2c2-flexcop: initialization of 'Air2PC/AirStar 2 ATSC 3rd generation (HD5000)' at the 'PCI' bus controlled by a 'FlexCopIIb' complete ACPI: PCI Interrupt 0000:00:10.2[B] -> GSI 21 (level, low) -> IRQ 19 uhci_hcd 0000:00:10.2: UHCI Host Controller uhci_hcd 0000:00:10.2: new USB bus registered, assigned bus number 4 uhci_hcd 0000:00:10.2: irq 19, io base 0x0000c000 usb usb4: configuration #1 chosen from 1 choice hub 4-0:1.0: USB hub found hub 4-0:1.0: 2 ports detected ACPI: PCI Interrupt 0000:00:10.3[B] -> GSI 21 (level, low) -> IRQ 19 uhci_hcd 0000:00:10.3: UHCI Host Controller uhci_hcd 0000:00:10.3: new USB bus registered, assigned bus number 5 uhci_hcd 0000:00:10.3: irq 19, io base 0x0000c400 usb usb5: configuration #1 chosen from 1 choice hub 5-0:1.0: USB hub found hub 5-0:1.0: 2 ports detected PCI: Enabling device 0000:00:11.6 (0000 -> 0001) ACPI: PCI Interrupt 0000:00:11.6[C] -> GSI 22 (level, low) -> IRQ 21 usb 5-2: new low speed USB device using uhci_hcd and address 2 ohci1394: fw-host0: Get PHY Reg timeout [0x00008500/0x00000000/100] ohci1394: fw-host0: Set PHY Reg timeout [0x00004540/0x00004000/100] usb 5-2: configuration #1 chosen from 1 choice usbcore: registered new interface driver hiddev input: Wireless INC TW Wireless USB Device as /class/input/input5 input: USB HID v1.10 Keyboard [Wireless INC TW Wireless USB Device] on usb-0000:00:10.3-2 input: Wireless INC TW Wireless USB Device as /class/input/input6 PCI: Setting latency timer of device 0000:00:11.6 to 64 input,hiddev96: USB HID v1.10 Mouse [Wireless INC TW Wireless USB Device] on usb-0000:00:10.3-2 usbcore: registered new interface driver usbhid drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver Switched to high resolution mode on CPU 0 ACPI: PCI interrupt for device 0000:00:11.6 disabled VIA 82xx Modem: probe of 0000:00:11.6 failed with error -13 ACPI: PCI Interrupt 0000:00:11.5[C] -> GSI 22 (level, low) -> IRQ 21 PCI: Setting latency timer of device 0000:00:11.5 to 64 ALSA /KNOPPIX.build/src/alsa-driver-hg20080219/pci/via82xx.c:581: codec_read: codec 0 is not valid [0xfe0000] ALSA /KNOPPIX.build/src/alsa-driver-hg20080219/pci/via82xx.c:581: codec_read: codec 0 is not valid [0xfe0000] ALSA /KNOPPIX.build/src/alsa-driver-hg20080219/pci/via82xx.c:581: codec_read: codec 0 is not valid [0xfe0000] ALSA /KNOPPIX.build/src/alsa-driver-hg20080219/pci/via82xx.c:581: codec_read: codec 0 is not valid [0xfe0000] Adding 1959920k swap on /dev/hda2. Priority:-1 extents:1 across:1959920k EXT3 FS on hda1, internal journal Non-volatile memory driver v1.2 ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver Initializing USB Mass Storage driver... usbcore: registered new interface driver usb-storage USB Mass Storage support registered. aufs 20080128 No dock devices found. fuse init (API version 7.8) NET: Registered protocol family 17 NET: Registered protocol family 10 lo: Disabled Privacy Extensions w83627hf: Found W83697HF chip at 0x290 kjournald starting. Commit interval 5 seconds EXT3 FS on hda3, internal journal EXT3-fs: mounted filesystem with ordered data mode. skge eth0: enabling interface ADDRCONF(NETDEV_UP): eth0: link is not ready skge eth0: Link is up at 100 Mbps, full duplex, flow control both ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready hda: selected mode 0x45 powernow-k8: Found 1 AMD Athlon(tm) 64 Processor 3000+ processors (1 cpu cores) (version 2.00.00) powernow-k8: 0 : fid 0xc (2000 MHz), vid 0x2 powernow-k8: 1 : fid 0xa (1800 MHz), vid 0x6 powernow-k8: 2 : fid 0xa (1800 MHz), vid 0x6 powernow-k8: 3 : fid 0x0 (800 MHz), vid 0xa powernow-k8: ph2 null fid transition 0xc Marking TSC unstable due to: cpufreq changes. Time: hpet clocksource has been installed. bootsplash 3.1.6-2004/03/31: looking for picture...<6>...found (800x600, 21500 bytes, v3). bootsplash: status on console 1 changed to on bootsplash 3.1.6-2004/03/31: looking for picture...<6>...found (800x600, 21500 bytes, v3). bootsplash: status on console 2 changed to on bootsplash 3.1.6-2004/03/31: looking for picture...<6>...found (800x600, 21500 bytes, v3). bootsplash: status on console 3 changed to on bootsplash 3.1.6-2004/03/31: looking for picture...<6>...found (800x600, 21500 bytes, v3). bootsplash: status on console 4 changed to on bootsplash 3.1.6-2004/03/31: looking for picture...<6>...found (800x600, 21500 bytes, v3). bootsplash: status on console 5 changed to on Clocksource tsc unstable (delta = -1655302693 ns) eth0: no IPv6 routers present nvidia: module license 'NVIDIA' taints kernel. ACPI: PCI Interrupt 0000:01:00.0[A] -> GSI 16 (level, low) -> IRQ 20 NVRM: loading NVIDIA UNIX x86 Kernel Module 173.14.09 Wed Jun 4 23:43:17 PDT 2008 agpgart: Found an AGP 3.5 compliant device at 0000:00:00.0. agpgart: Putting AGP V3 device at 0000:00:00.0 into 8x mode agpgart: Putting AGP V3 device at 0000:01:00.0 into 8x mode BUG: soft lockup - CPU#0 stuck for 11s! [Xorg:5551] Pid: 5551, comm: Xorg EIP: 0060:[<fa1e49e0>] CPU: 0 EIP is at _nv003993rm+0x23/0x24 [nvidia] EFLAGS: 00003212 Tainted: P (2.6.23-chw-4 #1) EAX: 000003cc EBX: f53de800 ECX: 00009200 EDX: fa600000 ESI: 00009200 EDI: f78b5000 EBP: ec69de3c DS: 007b ES: 007b FS: 00d8 CR0: 8005003b CR2: b69450f0 CR3: 36cba000 CR4: 00000690 DR0: 00000000 DR1: 00000000 DR2: 00000000 DR3: 00000000 DR6: ffff0ff0 DR7: 00000400 [<fa1a48fc>] _nv008244rm+0x70/0x95 [nvidia] [<fa251fba>] _nv001577rm+0x38/0x63 [nvidia] [<fa2510b3>] _nv001607rm+0x4d/0x102 [nvidia] [<fa1a703a>] _nv008727rm+0xdf/0x1a4 [nvidia] [<fa1723dc>] _nv005624rm+0x6f/0x9d [nvidia] [<fa0ab59a>] _nv009496rm+0x6c/0x163 [nvidia] [<fa0a99f3>] _nv009503rm+0x50d/0x5a1 [nvidia] [<fa0986f1>] _nv009501rm+0x91d/0xbe5 [nvidia] [<fa098a2b>] _nv009499rm+0x72/0x8b [nvidia] [<fa189171>] _nv002999rm+0x15f/0x171 [nvidia] [<fa18159d>] _nv005224rm+0x4b/0x72 [nvidia] [<fa0469c9>] _nv002985rm+0x2d1/0x5fd [nvidia] [<fa1ea005>] rm_ioctl+0x3e/0x6d [nvidia] [<fa28edd6>] nv_kern_ioctl+0x116/0x3c0 [nvidia] [<fa28f0b8>] nv_kern_unlocked_ioctl+0x18/0x20 [nvidia] [<fa28f0a0>] nv_kern_unlocked_ioctl+0x0/0x20 [nvidia] [<c019188b>] do_ioctl+0x2b/0x90 [<c0191b1e>] vfs_ioctl+0x22e/0x2b0 [<c0191bfd>] sys_ioctl+0x5d/0x70 [<c0104412>] syscall_call+0x7/0xb ======================= BUG: soft lockup - CPU#0 stuck for 11s! [Xorg:5551] Pid: 5551, comm: Xorg EIP: 0060:[<fa1e49e0>] CPU: 0 EIP is at _nv003993rm+0x23/0x24 [nvidia] EFLAGS: 00003212 Tainted: P (2.6.23-chw-4 #1) EAX: 10f5e554 EBX: f53de800 ECX: 00009410 EDX: fa600000 ESI: 00009410 EDI: f78b5000 EBP: ec69de30 DS: 007b ES: 007b FS: 00d8 CR0: 8005003b CR2: b62cc76c CR3: 36cba000 CR4: 00000690 DR0: 00000000 DR1: 00000000 DR2: 00000000 DR3: 00000000 DR6: ffff0ff0 DR7: 00000400 [<fa1a48fc>] _nv008244rm+0x70/0x95 [nvidia] [<fa252070>] _nv001588rm+0x1b/0x19a [nvidia] [<fa2510f2>] _nv001607rm+0x8c/0x102 [nvidia] [<fa1a703a>] _nv008727rm+0xdf/0x1a4 [nvidia] [<fa1723dc>] _nv005624rm+0x6f/0x9d [nvidia] [<fa0ab59a>] _nv009496rm+0x6c/0x163 [nvidia] [<fa0a99f3>] _nv009503rm+0x50d/0x5a1 [nvidia] [<fa0986f1>] _nv009501rm+0x91d/0xbe5 [nvidia] [<fa098a2b>] _nv009499rm+0x72/0x8b [nvidia] [<fa189171>] _nv002999rm+0x15f/0x171 [nvidia] [<fa18159d>] _nv005224rm+0x4b/0x72 [nvidia] [<fa0469c9>] _nv002985rm+0x2d1/0x5fd [nvidia] [<fa1ea005>] rm_ioctl+0x3e/0x6d [nvidia] [<fa28edd6>] nv_kern_ioctl+0x116/0x3c0 [nvidia] [<fa28f0b8>] nv_kern_unlocked_ioctl+0x18/0x20 [nvidia] [<fa28f0a0>] nv_kern_unlocked_ioctl+0x0/0x20 [nvidia] [<c019188b>] do_ioctl+0x2b/0x90 [<c0191b1e>] vfs_ioctl+0x22e/0x2b0 [<c0191bfd>] sys_ioctl+0x5d/0x70 [<c0104412>] syscall_call+0x7/0xb ======================= mythfrontend[5631]: segfault at 106b4445 eip 0842c35b esp b196520c error 6 BUG: soft lockup - CPU#0 stuck for 11s! [Xorg:5683] Pid: 5683, comm: Xorg EIP: 0060:[<fa1e49e0>] CPU: 0 EIP is at _nv003993rm+0x23/0x24 [nvidia] EFLAGS: 00003212 Tainted: P (2.6.23-chw-4 #1) EAX: 10f5e55a EBX: f53de800 ECX: 00009410 EDX: fa600000 ESI: 00009410 EDI: f78b5000 EBP: f783de3c DS: 007b ES: 007b FS: 00d8 CR0: 80050033 CR2: b6a08054 CR3: 36c9d000 CR4: 00000690 DR0: 00000000 DR1: 00000000 DR2: 00000000 DR3: 00000000 DR6: ffff0ff0 DR7: 00000400 [<fa1a48fc>] _nv008244rm+0x70/0x95 [nvidia] [<fa252070>] _nv001588rm+0x1b/0x19a [nvidia] [<fa25117f>] _nv001595rm+0x17/0x2a [nvidia] [<fa1a7045>] _nv008727rm+0xea/0x1a4 [nvidia] [<fa1723dc>] _nv005624rm+0x6f/0x9d [nvidia] [<fa0ab59a>] _nv009496rm+0x6c/0x163 [nvidia] [<fa0a99f3>] _nv009503rm+0x50d/0x5a1 [nvidia] [<fa0986f1>] _nv009501rm+0x91d/0xbe5 [nvidia] [<fa098a2b>] _nv009499rm+0x72/0x8b [nvidia] [<fa189171>] _nv002999rm+0x15f/0x171 [nvidia] [<fa18159d>] _nv005224rm+0x4b/0x72 [nvidia] [<fa0469c9>] _nv002985rm+0x2d1/0x5fd [nvidia] [<fa1ea005>] rm_ioctl+0x3e/0x6d [nvidia] [<fa28edd6>] nv_kern_ioctl+0x116/0x3c0 [nvidia] [<fa28f0b8>] nv_kern_unlocked_ioctl+0x18/0x20 [nvidia] [<fa28f0a0>] nv_kern_unlocked_ioctl+0x0/0x20 [nvidia] [<c019188b>] do_ioctl+0x2b/0x90 [<c0191b1e>] vfs_ioctl+0x22e/0x2b0 [<c0191bfd>] sys_ioctl+0x5d/0x70 [<c0104412>] syscall_call+0x7/0xb ======================= BUG: soft lockup - CPU#0 stuck for 11s! [Xorg:5683] Pid: 5683, comm: Xorg EIP: 0060:[<fa1e49e0>] CPU: 0 EIP is at _nv003993rm+0x23/0x24 [nvidia] EFLAGS: 00003212 Tainted: P (2.6.23-chw-4 #1) EAX: 02002001 EBX: f53de800 ECX: 0000b200 EDX: fa600000 ESI: 0000b200 EDI: f78b5000 EBP: f783de5c DS: 007b ES: 007b FS: 00d8 CR0: 8005003b CR2: b7d82550 CR3: 36c9d000 CR4: 00000690 DR0: 00000000 DR1: 00000000 DR2: 00000000 DR3: 00000000 DR6: ffff0ff0 DR7: 00000400 [<fa1a48fc>] _nv008244rm+0x70/0x95 [nvidia] [<fa1723f9>] _nv005624rm+0x8c/0x9d [nvidia] [<fa0ab59a>] _nv009496rm+0x6c/0x163 [nvidia] [<fa0a99f3>] _nv009503rm+0x50d/0x5a1 [nvidia] [<fa0986f1>] _nv009501rm+0x91d/0xbe5 [nvidia] [<fa098a2b>] _nv009499rm+0x72/0x8b [nvidia] [<fa189171>] _nv002999rm+0x15f/0x171 [nvidia] [<fa18159d>] _nv005224rm+0x4b/0x72 [nvidia] [<fa0469c9>] _nv002985rm+0x2d1/0x5fd [nvidia] [<fa1ea005>] rm_ioctl+0x3e/0x6d [nvidia] [<fa28edd6>] nv_kern_ioctl+0x116/0x3c0 [nvidia] [<fa28f0b8>] nv_kern_unlocked_ioctl+0x18/0x20 [nvidia] [<fa28f0a0>] nv_kern_unlocked_ioctl+0x0/0x20 [nvidia] [<c019188b>] do_ioctl+0x2b/0x90 [<c0191b1e>] vfs_ioctl+0x22e/0x2b0 [<c01824b7>] filp_close+0x47/0x80 [<c0191bfd>] sys_ioctl+0x5d/0x70 [<c0104412>] syscall_call+0x7/0xb ======================= BUG: soft lockup - CPU#0 stuck for 11s! [Xorg:5683] Pid: 5683, comm: Xorg EIP: 0060:[<fa1e49e0>] CPU: 0 EIP is at _nv003993rm+0x23/0x24 [nvidia] EFLAGS: 00003216 Tainted: P (2.6.23-chw-4 #1) EAX: d441c280 EBX: f53de800 ECX: 00009400 EDX: fa600000 ESI: 00009400 EDI: f78b5000 EBP: f783de30 DS: 007b ES: 007b FS: 00d8 CR0: 8005003b CR2: b633476c CR3: 36c9d000 CR4: 00000690 DR0: 00000000 DR1: 00000000 DR2: 00000000 DR3: 00000000 DR6: ffff0ff0 DR7: 00000400 [<fa1a48fc>] _nv008244rm+0x70/0x95 [nvidia] [<fa252094>] _nv001588rm+0x3f/0x19a [nvidia] [<fa251126>] _nv001607rm+0xc0/0x102 [nvidia] [<fa1a703a>] _nv008727rm+0xdf/0x1a4 [nvidia] [<fa1723dc>] _nv005624rm+0x6f/0x9d [nvidia] [<fa0ab59a>] _nv009496rm+0x6c/0x163 [nvidia] [<fa0a99f3>] _nv009503rm+0x50d/0x5a1 [nvidia] [<fa0986f1>] _nv009501rm+0x91d/0xbe5 [nvidia] [<fa098a2b>] _nv009499rm+0x72/0x8b [nvidia] [<fa189171>] _nv002999rm+0x15f/0x171 [nvidia] [<fa18159d>] _nv005224rm+0x4b/0x72 [nvidia] [<fa0469c9>] _nv002985rm+0x2d1/0x5fd [nvidia] [<fa1ea005>] rm_ioctl+0x3e/0x6d [nvidia] [<fa28edd6>] nv_kern_ioctl+0x116/0x3c0 [nvidia] [<fa28f0b8>] nv_kern_unlocked_ioctl+0x18/0x20 [nvidia] [<fa28f0a0>] nv_kern_unlocked_ioctl+0x0/0x20 [nvidia] [<c019188b>] do_ioctl+0x2b/0x90 [<c0191b1e>] vfs_ioctl+0x22e/0x2b0 [<c0191bfd>] sys_ioctl+0x5d/0x70 [<c0104412>] syscall_call+0x7/0xb ======================= mythfrontend[5754]: segfault at 00000001 eip 0842f580 esp b19a220c error 4 BUG: soft lockup - CPU#0 stuck for 11s! [Xorg:5795] Pid: 5795, comm: Xorg EIP: 0060:[<fa1e49e0>] CPU: 0 EIP is at _nv003993rm+0x23/0x24 [nvidia] EFLAGS: 00003212 Tainted: P (2.6.23-chw-4 #1) EAX: 10f5e590 EBX: f53de800 ECX: 00009410 EDX: fa600000 ESI: 00009410 EDI: f78b5000 EBP: dc057e30 DS: 007b ES: 007b FS: 00d8 CR0: 8005003b CR2: b69ed054 CR3: 373c1000 CR4: 00000690 DR0: 00000000 DR1: 00000000 DR2: 00000000 DR3: 00000000 DR6: ffff0ff0 DR7: 00000400 [<fa1a48fc>] _nv008244rm+0x70/0x95 [nvidia] [<fa2521b9>] _nv001588rm+0x164/0x19a [nvidia] [<fa251126>] _nv001607rm+0xc0/0x102 [nvidia] [<fa1a703a>] _nv008727rm+0xdf/0x1a4 [nvidia] [<fa1723dc>] _nv005624rm+0x6f/0x9d [nvidia] [<fa0ab59a>] _nv009496rm+0x6c/0x163 [nvidia] [<fa0a99f3>] _nv009503rm+0x50d/0x5a1 [nvidia] [<fa0986f1>] _nv009501rm+0x91d/0xbe5 [nvidia] [<fa098a2b>] _nv009499rm+0x72/0x8b [nvidia] [<fa189171>] _nv002999rm+0x15f/0x171 [nvidia] [<fa18159d>] _nv005224rm+0x4b/0x72 [nvidia] [<fa0469c9>] _nv002985rm+0x2d1/0x5fd [nvidia] [<fa1ea005>] rm_ioctl+0x3e/0x6d [nvidia] [<fa28edd6>] nv_kern_ioctl+0x116/0x3c0 [nvidia] [<fa28f0b8>] nv_kern_unlocked_ioctl+0x18/0x20 [nvidia] [<fa28f0a0>] nv_kern_unlocked_ioctl+0x0/0x20 [nvidia] [<c019188b>] do_ioctl+0x2b/0x90 [<c0191b1e>] vfs_ioctl+0x22e/0x2b0 [<c0191bfd>] sys_ioctl+0x5d/0x70 [<c0104412>] syscall_call+0x7/0xb ======================= mythfrontend[5866]: segfault at 29082d3f eip 082d3ff5 esp b194020c error 6 agpgart: Found an AGP 3.5 compliant device at 0000:00:00.0. agpgart: Putting AGP V3 device at 0000:00:00.0 into 8x mode agpgart: Putting AGP V3 device at 0000:01:00.0 into 8x mode |
Author: | diblasio [ Tue Sep 23, 2008 6:37 am ] |
Post subject: | |
I can get non hd playback by setting Option "NVAGP" "1" in my xorg.conf, but hd video playback drops a lot of frames and is straining to watch. Also with Option "NVAGP" "1" set I get Code: mythtv@mythtv:~$ cat /proc/driver/nvidia/agp/status
Status: Disabled |
Author: | diblasio [ Sat Sep 27, 2008 9:28 am ] |
Post subject: | |
Ok so I have been trying all of the deinterlace modes, and all of them yield the same results. It crashes. |
Author: | cecil [ Tue Sep 30, 2008 6:46 pm ] |
Post subject: | |
You need to provide greater hardware details. |
Author: | steeve [ Mon Oct 13, 2008 2:48 pm ] |
Post subject: | |
cecil wrote: You need to provide greater hardware details.
Cecil et al, I've just begun to see this bug after a clean install of R5.5 on an 80Gb SATA drive in my backend. In my case, the message is: BUG: soft lockup - CPU#X stuck for 11s! [mbmon:nnnn]. I've been doing some research on the bug, and so far, all of the suggestions have brought no resolution. Tried installing "irqbalance", appending LILO with "acpi=no", and a few other tricks I can't remember right now. Major bummer because I really, really like what I see in R5.5 in terms of improvements over R5F27. My hardware is in my sig. This bug is not specific to Debian or Knoppix and thus not specific to MythTV or KnoppMyth. It appears to be a kernel-related issue (which really bums me out because the last thing I want to ask for is a bloody custom kernel!). My current R5F27 install is on a 500Gb IDE drive and this problem does not appear. I gave up on my R5.5 install last night after wrestling with this for 4 hrs. I'll get back after it tonight, but from what I can gather, it may be a futile gesture. -sTv EDIT Oct. 15, 2008, 10PM: I followed this thread http://mysettopbox.tv/phpBB2/viewtopic.php?t=16546 to disable mbmon and use sensors instead to monitor MBTemp and MBFan. This action stopped periodic system hangs and crushed the BUG error messages in syslog. Friggin' yay, mon! -sTv |
Author: | diblasio [ Fri Oct 17, 2008 1:38 pm ] |
Post subject: | |
Yeah it is really bumming me out. Here are my specs... R5F27 asus K8V with northbridge via K8T800, southbridge via VT8237 athlon64 3000+ Air2pc HD5000 nvidia 6200 agp 8x currently running 173.14.12 drivers |
Page 1 of 1 | All times are UTC - 6 hours |
Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |