View unanswered posts    View active topics

Board index KnoppMyth Hardware

All times are UTC - 6 hours





Post new topic Reply to topic  Page 1 of 1
  [ 4 posts ] 
Print view Previous topic   Next topic  
Author Message
Search for:
tama102
 Post subject: Optoma HD65 modeline
PostPosted: Thu Oct 16, 2008 7:40 am 
Offline
Joined: Wed May 24, 2006 9:10 am
Posts: 107
Location: Minneapolis, MN
Just picked up an Optoma HD65 projector, I have it going from my Nvidia 6200 graphics card through DVI via a conversion cable of DVI to HDMI. Just wondering if anyone else out there has this projector or a similar 720p projector. Just tried to find some good custom modelines for this projector with no luck. Anyone have this projector? If so, what modeline are you using through HDMI? I would love to pixelmap. Thanks.
Top
 Profile  
 
neutron68
PostPosted: Sat Oct 18, 2008 8:50 am 
Offline
Joined: Tue Mar 28, 2006 8:26 pm
Posts: 804
Location: Minneapolis, MN
I made a modeline for my friend's Mitsuibishi 1280x768 projector. I see yours is a 1280x720, so it's not exactly the same, but close.

Here are the modelines I tried during the tweaking process. You can tweak an existing modeline to get what you need for 1280x720.

I started with the 720p modelines from this page:
http://www.mythtv.org/wiki/index.php/Modeline_Database

I also used a modeline calculator llike this:
http://xtiming.sourceforge.net/cgi-bin/xtiming.pl
to get me close to a correct custom value, and then started altering values until I got the image to fit on the imaging chip in the projector.

You can tell from the list, that I would tweak one value, restart xorg, look at the results and then tweak another value, etc.
I settled on version "s" at the bottom of the list.
Code:
    ModeLine       "ATSC-720-59.94p" 74.2 1280 1320 1376 1650 720 722 728 750 -hsync -vsync
    ModeLine       "ATSC-720-60p" 74.2 1280 1320 1376 1650 720 722 728 750 -hsync -vsync
    ModeLine       "1280x768-a" 79.5 1280 1344 1472 1664 768 771 778 798 -hsync -vsync
    ModeLine       "1280x768-a1" 79.59 1280 1344 1472 1664 768 771 778 798 -hsync -vsync
    ModeLine       "1280x768-c" 80.14 1280 1344 1480 1680 768 769 772 795 -hsync -vsync
    ModeLine       "1280x768-b" 129.859 1280 1368 1504 1728 768 769 772 814 -hsync -vsync
    ModeLine       "1280x768-d" 81.0 1280 1344 1480 1680 768 769 785 795 -hsync -vsync
    ModeLine       "1280x768-e" 81.59 1280 1280 1384 1688 768 769 774 791 -hsync -vsync
    ModeLine       "1280x768-f" 79.5 1280 1360 1488 1664 768 771 778 798 -hsync -vsync
    Modeline       "1280x768-g" 79.5 1280 1360 1488 1672 768 771 778 798 -hsync -vsync
    Modeline       "1280x768-h" 79.5 1280 1360 1488 1680 768 771 778 798 -hsync -vsync
    Modeline       "1280x768-i" 79.5 1280 1360 1488 1688 768 771 778 798 -hsync -vsync
    Modeline       "1280x768-j" 79.5 1280 1376 1504 1688 768 771 778 798 -hsync -vsync
    Modeline       "1280x768-k" 79.5 1280 1376 1504 1696 768 771 778 798 -hsync -vsync
    Modeline       "1280x768-l" 79.5 1280 1376 1504 1702 768 771 778 798 -hsync -vsync
    Modeline       "1280x768-m" 81.4 1280 1376 1504 1702 768 771 778 798 -hsync -vsync
    Modeline       "1280x768-n" 81.13 1280 1376 1504 1696 768 771 778 798 -hsync -vsync
    Modeline       "1280x768-o" 81.5  1280 1376 1504 1704 768 771 778 798  -hsync -vsync
    Modeline       "1280x768-p" 81.9  1280 1376 1504 1712 768 771 778 798  -hsync -vsync
    Modeline       "1280x768-q" 82.27 1280 1376 1504 1720 768 771 778 798  -hsync -vsync
    Modeline       "1280x768-r" 82.65 1280 1376 1504 1728 768 771 778 798  -hsync -vsync
    Modeline       "1280x768-s" 83.05 1280 1376 1504 1736 768 771 778 798  -hsync -vsync

Eric

_________________
KnoppMyth R5.5, Asus A8N-VM CSM (nvidia 6150 onboard video), AMD Athlon 64 dual-core 4200+, two 1GB sticks DDR 400, HD-3000 HDTV card, PVR-150 card, Iguanaworks RS-232 IR receiver/transmitter, Pioneer DVR-110 DVD burner
Top
 Profile  
 
tama102
 Post subject:
PostPosted: Sat Oct 18, 2008 10:20 am 
Offline
Joined: Wed May 24, 2006 9:10 am
Posts: 107
Location: Minneapolis, MN
Cool, thanks.

Also, what image did you use to tell if the image was fitting on the projector's image chip? How do you do this?
Top
 Profile  
 
neutron68
 Post subject: test patterns
PostPosted: Sat Oct 18, 2008 3:04 pm 
Offline
Joined: Tue Mar 28, 2006 8:26 pm
Posts: 804
Location: Minneapolis, MN
I used the 1280x720 test pattern from here:
http://www.tigerdave.com/test_patterns.htm

specifically:
http://www.tigerdave.com/images/testpat ... erscan.gif

I put the test pattern into the Mythtv Image Gallery and then brought up the image so it was full screen. Then, I kept changing the modeline variables until all 4 corners were on the screen.

_________________
KnoppMyth R5.5, Asus A8N-VM CSM (nvidia 6150 onboard video), AMD Athlon 64 dual-core 4200+, two 1GB sticks DDR 400, HD-3000 HDTV card, PVR-150 card, Iguanaworks RS-232 IR receiver/transmitter, Pioneer DVR-110 DVD burner
Top
 Profile  
 

Display posts from previous:  Sort by  
Post new topic Reply to topic  Page 1 of 1
  [ 4 posts ] 


Board index KnoppMyth Hardware

All times are UTC - 6 hours




Who is online

Users browsing this forum: No registered users and 84 guests

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Jump to:  
cron
Powered by phpBB® Forum Software © phpBB Group

Theme Created By ceyhansuyu