View unanswered posts    View active topics

All times are UTC - 6 hours





Post new topic Reply to topic  [ 11 posts ] 
Print view Previous topic   Next topic  
Author Message
Search for:
PostPosted: Fri Jun 19, 2009 10:19 am 
Offline
Joined: Sat Jan 31, 2004 12:50 pm
Posts: 84
Location: Santa Cruz Mountains, CA
I have an Asus Xonar DX sound card that was working perfectly in R5.5 after manually compiling alsa. After upgrading to R6, the analog out will play audio to head phones or speakers fine, but the 3.5mm stereo-to-RCA cable going to my TV doesn't produce any sound on the TV. :cry:
All "tests" i've done are using speaker-test, aplay, and mplayer with VDPAU enabled.

Without changing any configurations, boot the ubuntu 9 i386 liveCD and audio tests work on the TV without any modifications. :shock:

I have also tried connecting my unibody macbook to the same cables my PVR is using and the audio/video output works perfectly.

i've tried compiling alsa 1.0.20(drivers,lib,utils,oss) per the alsa instructions here and I get the same result.

I also tried the 1.0.20 packages from ArchLinux repos with the same outcome.

Current state: Ran make uninstall from the alsa-* source directories, reinstalled alsa-* packages and the kernel and kernel-header packages from knoppmyth R6 repo.

I have tried many alsamixer combination's with & with-out IEC958, Line-In, Front Panel muted/un-muted. nothing will get the audio to output to the TV, but ALWAYS will play to an external PC speaker( Altec Lansing SoundBar ) or my ipod headphones.

Here is some (hopefully useful) command output that might allow someone to help me cause i'm at a loss right now.

dmesg
Code:
[root@SnowTV ~]# dmesg
BIOS EBDA/lowmem at: 0009dc00/0009dc00
Linux version 2.6.28-LinHES (root@myhost) (gcc version 4.3.2 (GCC) ) #1 SMP PREEMPT Sat Feb 14 12:09:54 UTC 2009
KERNEL supported cpus:
  Intel GenuineIntel
  AMD AuthenticAMD
  NSC Geode by NSC
  Cyrix CyrixInstead
  Centaur CentaurHauls
  Transmeta GenuineTMx86
  Transmeta TransmetaCPU
  UMC UMC UMC UMC
BIOS-provided physical RAM map:
 BIOS-e820: 0000000000000000 - 000000000009dc00 (usable)
 BIOS-e820: 000000000009dc00 - 00000000000a0000 (reserved)
 BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
 BIOS-e820: 0000000000100000 - 000000007ffa0000 (usable)
 BIOS-e820: 000000007ffa0000 - 000000007ffae000 (ACPI data)
 BIOS-e820: 000000007ffae000 - 000000007fff0000 (ACPI NVS)
 BIOS-e820: 000000007fff0000 - 0000000080000000 (reserved)
 BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
 BIOS-e820: 00000000ffb00000 - 0000000100000000 (reserved)
DMI present.
AMI BIOS detected: BIOS may corrupt low RAM, working it around.
last_pfn = 0x7ffa0 max_arch_pfn = 0x100000
x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
Scanning 0 areas for low memory corruption
modified physical RAM map:
 modified: 0000000000000000 - 0000000000010000 (reserved)
 modified: 0000000000010000 - 000000000009dc00 (usable)
 modified: 000000000009dc00 - 00000000000a0000 (reserved)
 modified: 00000000000e0000 - 0000000000100000 (reserved)
 modified: 0000000000100000 - 000000007ffa0000 (usable)
 modified: 000000007ffa0000 - 000000007ffae000 (ACPI data)
 modified: 000000007ffae000 - 000000007fff0000 (ACPI NVS)
 modified: 000000007fff0000 - 0000000080000000 (reserved)
 modified: 00000000fee00000 - 00000000fee01000 (reserved)
 modified: 00000000ffb00000 - 0000000100000000 (reserved)
kernel direct mapping tables up to 377fe000 @ 10000-16000
RAMDISK: 7fdf3000 - 7ff8f4b4
Allocated new RAMDISK: 0055f000 - 006fb4b4
Move RAMDISK from 000000007fdf3000 - 000000007ff8f4b3 to 0055f000 - 006fb4b3
ACPI: RSDP 000F9380, 0014 (r0 ACPIAM)
ACPI: RSDT 7FFA0000, 003C (r1 041907 RSDT1450 20070419 MSFT       97)
ACPI: FACP 7FFA0200, 0084 (r2 041907 FACP1450 20070419 MSFT       97)
ACPI: DSDT 7FFA0440, 5B43 (r1  1AAAA 1AAAA000        0 INTL 20051117)
ACPI: FACS 7FFAE000, 0040
ACPI: APIC 7FFA0390, 006C (r1 041907 APIC1450 20070419 MSFT       97)
ACPI: MCFG 7FFA0400, 003C (r1 041907 OEMMCFG  20070419 MSFT       97)
ACPI: OEMB 7FFAE040, 0061 (r1 041907 OEMB1450 20070419 MSFT       97)
ACPI: ASF! 7FFA5F90, 0099 (r32 LEGEND I865PASF        1 INTL 20051117)
ACPI: GSCI 7FFAE0B0, 2024 (r1 041907 GMCHSCI  20070419 MSFT       97)
ACPI: Local APIC address 0xfee00000
1159MB HIGHMEM available.
887MB LOWMEM available.
  mapped low ram: 0 - 377fe000
  low ram: 00000000 - 377fe000
  bootmap 00012000 - 00018f00
(9 early reservations) ==> bootmem [0000000000 - 00377fe000]
  #0 [0000000000 - 0000001000]   BIOS data page ==> [0000000000 - 0000001000]
  #1 [0000001000 - 0000002000]    EX TRAMPOLINE ==> [0000001000 - 0000002000]
  #2 [0000006000 - 0000007000]       TRAMPOLINE ==> [0000006000 - 0000007000]
  #3 [0000100000 - 000055b520]    TEXT DATA BSS ==> [0000100000 - 000055b520]
  #4 [000055c000 - 000055f000]    INIT_PG_TABLE ==> [000055c000 - 000055f000]
  #5 [000009dc00 - 0000100000]    BIOS reserved ==> [000009dc00 - 0000100000]
  #6 [0000010000 - 0000012000]          PGTABLE ==> [0000010000 - 0000012000]
  #7 [000055f000 - 00006fb4b4]      NEW RAMDISK ==> [000055f000 - 00006fb4b4]
  #8 [0000012000 - 0000019000]          BOOTMAP ==> [0000012000 - 0000019000]
found SMP MP-table at [c00ff780] 000ff780
Zone PFN ranges:
  DMA      0x00000010 -> 0x00001000
  Normal   0x00001000 -> 0x000377fe
  HighMem  0x000377fe -> 0x0007ffa0
Movable zone start PFN for each node
early_node_map[2] active PFN ranges
    0: 0x00000010 -> 0x0000009d
    0: 0x00000100 -> 0x0007ffa0
On node 0 totalpages: 524077
free_area_init_node: node 0, pgdat c0407780, node_mem_map c1000200
  DMA zone: 32 pages used for memmap
  DMA zone: 0 pages reserved
  DMA zone: 3949 pages, LIFO batch:0
  Normal zone: 1744 pages used for memmap
  Normal zone: 221486 pages, LIFO batch:31
  HighMem zone: 2320 pages used for memmap
  HighMem zone: 294546 pages, LIFO batch:31
  Movable zone: 0 pages used for memmap
ACPI: PM-Timer IO Port: 0x808
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
ACPI: LAPIC (acpi_id[0x03] lapic_id[0x82] disabled)
ACPI: LAPIC (acpi_id[0x04] lapic_id[0x83] disabled)
ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
Enabling APIC mode:  Flat.  Using 1 I/O APICs
Using ACPI (MADT) for SMP configuration information
SMP: Allowing 4 CPUs, 2 hotplug CPUs
PM: Registered nosave memory: 000000000009d000 - 000000000009e000
PM: Registered nosave memory: 000000000009e000 - 00000000000a0000
PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000
PM: Registered nosave memory: 00000000000e0000 - 0000000000100000
Allocating PCI resources starting at 88000000 (gap: 80000000:7ee00000)
PERCPU: Allocating 36864 bytes of per cpu data
NR_CPUS: 16, nr_cpu_ids: 4, nr_node_ids 1
Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 519981
Kernel command line: root=/dev/disk/by-uuid/445d1e75-1437-45df-8382-f63bb81acfaa ro init=/sbin/runit quiet  vga=0x314 splash=silent,theme:linhes console=tty1
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Initializing CPU#0
PID hash table entries: 4096 (order: 12, 16384 bytes)
Fast TSC calibration using PIT
Detected 2493.822 MHz processor.
Console: colour dummy device 80x25
console [tty1] enabled
Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
Scanning for low memory corruption every 60 seconds
Memory: 2071964k/2096768k available (2235k kernel code, 23516k reserved, 1023k data, 324k init, 1187464k highmem)
virtual kernel memory layout:
    fixmap  : 0xffee8000 - 0xfffff000   (1116 kB)
    pkmap   : 0xff800000 - 0xffc00000   (4096 kB)
    vmalloc : 0xf7ffe000 - 0xff7fe000   ( 120 MB)
    lowmem  : 0xc0000000 - 0xf77fe000   ( 887 MB)
      .init : 0xc0435000 - 0xc0486000   ( 324 kB)
      .data : 0xc032ec9e - 0xc042eb5c   (1023 kB)
      .text : 0xc0100000 - 0xc032ec9e   (2235 kB)
Checking if this processor honours the WP bit even in supervisor mode...Ok.
SLUB: Genslabs=12, HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
Calibrating delay loop (skipped), value calculated using timer frequency.. 4989.46 BogoMIPS (lpj=8312740)
Security Framework initialized
Mount-cache hash table entries: 512
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 2048K
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#0.
using mwait in idle threads.
Checking 'hlt' instruction... OK.
ACPI: Core revision 20080926
ACPI: Checking initramfs for custom DSDT
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
CPU0: Intel Pentium(R) Dual-Core  CPU      E5200  @ 2.50GHz stepping 06
Booting processor 1 APIC 0x1 ip 0x6000
Initializing CPU#1
Calibrating delay using timer specific routine.. 4989.94 BogoMIPS (lpj=8311916)
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 2048K
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 1
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#1.
x86 PAT enabled: cpu 1, old 0x7040600070406, new 0x7010600070106
CPU1: Intel Pentium(R) Dual-Core  CPU      E5200  @ 2.50GHz stepping 06
checking TSC synchronization [CPU#0 -> CPU#1]: passed.
Brought up 2 CPUs
Total of 2 processors activated (9978.41 BogoMIPS).
net_namespace: 768 bytes
Booting paravirtualized kernel on bare hardware
NET: Registered protocol family 16
ACPI: bus type pci registered
PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255
PCI: Not using MMCONFIG.
PCI: PCI BIOS revision 3.00 entry at 0xf0031, last bus=9
PCI: Using configuration type 1 for base access
ACPI: EC: Look up EC in DSDT
ACPI: Interpreter enabled
ACPI: (supports S0 S1 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255
PCI: MCFG area at e0000000 reserved in ACPI motherboard resources
PCI: Using MMCONFIG for extended config space
ACPI: No dock devices found.
ACPI: PCI Root Bridge [PCI0] (0000:00)
pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
pci 0000:00:01.0: PME# disabled
pci 0000:00:1a.0: reg 20 io port: [0xe000-0xe01f]
pci 0000:00:1a.1: reg 20 io port: [0xdc00-0xdc1f]
pci 0000:00:1a.7: reg 10 32bit mmio: [0xfebffc00-0xfebfffff]
pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold
pci 0000:00:1a.7: PME# disabled
pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.0: PME# disabled
pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.1: PME# disabled
pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.2: PME# disabled
pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.3: PME# disabled
pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.4: PME# disabled
pci 0000:00:1c.5: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.5: PME# disabled
pci 0000:00:1d.0: reg 20 io port: [0xd880-0xd89f]
pci 0000:00:1d.1: reg 20 io port: [0xd800-0xd81f]
pci 0000:00:1d.2: reg 20 io port: [0xd480-0xd49f]
pci 0000:00:1d.3: reg 20 io port: [0xd400-0xd41f]
pci 0000:00:1d.7: reg 10 32bit mmio: [0xfebff800-0xfebffbff]
pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
pci 0000:00:1d.7: PME# disabled
pci 0000:00:1f.0: quirk: region 0800-087f claimed by ICH6 ACPI/GPIO/TCO
pci 0000:00:1f.0: quirk: region 0480-04bf claimed by ICH6 GPIO
pci 0000:00:1f.2: reg 10 io port: [0xec00-0xec07]
pci 0000:00:1f.2: reg 14 io port: [0xe880-0xe883]
pci 0000:00:1f.2: reg 18 io port: [0xe800-0xe807]
pci 0000:00:1f.2: reg 1c io port: [0xe480-0xe483]
pci 0000:00:1f.2: reg 20 io port: [0xe400-0xe40f]
pci 0000:00:1f.2: reg 24 io port: [0xe080-0xe08f]
pci 0000:00:1f.3: reg 10 64bit mmio: [0xfebff400-0xfebff4ff]
pci 0000:00:1f.3: reg 20 io port: [0x400-0x41f]
pci 0000:00:1f.5: reg 10 io port: [0xd000-0xd007]
pci 0000:00:1f.5: reg 14 io port: [0xcc00-0xcc03]
pci 0000:00:1f.5: reg 18 io port: [0xc880-0xc887]
pci 0000:00:1f.5: reg 1c io port: [0xc800-0xc803]
pci 0000:00:1f.5: reg 20 io port: [0xc480-0xc48f]
pci 0000:00:1f.5: reg 24 io port: [0xc400-0xc40f]
pci 0000:01:00.0: reg 10 32bit mmio: [0xfd000000-0xfdffffff]
pci 0000:01:00.0: reg 14 64bit mmio: [0xc0000000-0xcfffffff]
pci 0000:01:00.0: reg 1c 64bit mmio: [0xfa000000-0xfbffffff]
pci 0000:01:00.0: reg 24 io port: [0x9c00-0x9c7f]
pci 0000:01:00.0: reg 30 32bit mmio: [0xfe9e0000-0xfe9fffff]
pci 0000:00:01.0: bridge io port: [0x9000-0x9fff]
pci 0000:00:01.0: bridge 32bit mmio: [0xf8900000-0xfe9fffff]
pci 0000:00:01.0: bridge 64bit mmio pref: [0xb7f00000-0xd7efffff]
pci 0000:00:1c.3: bridge io port: [0xa000-0xafff]
pci 0000:06:04.0: reg 10 io port: [0xa800-0xa8ff]
pci 0000:06:04.0: supports D1 D2
pci 0000:05:00.0: bridge io port: [0xa000-0xafff]
pci 0000:08:00.0: reg 10 io port: [0xb800-0xb8ff]
pci 0000:08:00.0: reg 18 64bit mmio: [0xfeaff000-0xfeafffff]
pci 0000:08:00.0: reg 30 32bit mmio: [0xfeac0000-0xfeadffff]
pci 0000:08:00.0: supports D1 D2
pci 0000:08:00.0: PME# supported from D1 D2 D3hot D3cold
pci 0000:08:00.0: PME# disabled
pci 0000:00:1c.5: bridge io port: [0xb000-0xbfff]
pci 0000:00:1c.5: bridge 32bit mmio: [0xfea00000-0xfeafffff]
pci 0000:09:01.0: reg 10 32bit mmio: [0xd8000000-0xdbffffff]
pci 0000:00:1e.0: transparent bridge
pci 0000:00:1e.0: bridge 64bit mmio pref: [0xd7f00000-0xdfefffff]
bus 00 -> node 0
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P4._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P5._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P6._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P7._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P8._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P9._PRT]
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 6 7 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs *5)
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 6 7 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 6 7 10 11 12 14 *15)
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 6 *7 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 6 7 10 11 12 *14 15)
ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 6 7 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKH] (IRQs *3 4 6 7 10 11 12 14 15)
PCI: Using ACPI for IRQ routing
NetLabel: Initializing
NetLabel:  domain hash size = 128
NetLabel:  protocols = UNLABELED CIPSOv4
NetLabel:  unlabeled traffic allowed by default
pnp: PnP ACPI init
ACPI: bus type pnp registered
pnp: PnP ACPI: found 13 devices
ACPI: ACPI bus type pnp unregistered
system 00:01: iomem range 0xfed14000-0xfed19fff has been reserved
system 00:06: ioport range 0xa00-0xa0f has been reserved
system 00:06: ioport range 0xa10-0xa1f has been reserved
system 00:06: ioport range 0xa20-0xa2f has been reserved
system 00:06: ioport range 0xa30-0xa3f has been reserved
system 00:07: ioport range 0x4d0-0x4d1 has been reserved
system 00:07: ioport range 0x800-0x87f has been reserved
system 00:07: ioport range 0x480-0x4bf has been reserved
system 00:07: iomem range 0xfed1c000-0xfed1ffff has been reserved
system 00:07: iomem range 0xfed20000-0xfed8ffff has been reserved
system 00:09: iomem range 0xffc00000-0xffefffff has been reserved
system 00:0a: iomem range 0xfec00000-0xfec00fff has been reserved
system 00:0a: iomem range 0xfee00000-0xfee00fff has been reserved
system 00:0b: iomem range 0xe0000000-0xefffffff has been reserved
system 00:0c: iomem range 0x0-0x9ffff could not be reserved
system 00:0c: iomem range 0xc0000-0xcffff could not be reserved
system 00:0c: iomem range 0xe0000-0xfffff could not be reserved
system 00:0c: iomem range 0x100000-0x7fffffff could not be reserved
pci 0000:00:01.0: PCI bridge, secondary bus 0000:01
pci 0000:00:01.0:   IO window: 0x9000-0x9fff
pci 0000:00:01.0:   MEM window: 0xf8900000-0xfe9fffff
pci 0000:00:01.0:   PREFETCH window: 0x000000b7f00000-0x000000d7efffff
pci 0000:00:1c.0: PCI bridge, secondary bus 0000:02
pci 0000:00:1c.0:   IO window: disabled
pci 0000:00:1c.0:   MEM window: disabled
pci 0000:00:1c.0:   PREFETCH window: disabled
pci 0000:00:1c.1: PCI bridge, secondary bus 0000:03
pci 0000:00:1c.1:   IO window: disabled
pci 0000:00:1c.1:   MEM window: disabled
pci 0000:00:1c.1:   PREFETCH window: disabled
pci 0000:00:1c.2: PCI bridge, secondary bus 0000:04
pci 0000:00:1c.2:   IO window: disabled
pci 0000:00:1c.2:   MEM window: disabled
pci 0000:00:1c.2:   PREFETCH window: disabled
pci 0000:05:00.0: PCI bridge, secondary bus 0000:06
pci 0000:05:00.0:   IO window: 0xa000-0xafff
pci 0000:05:00.0:   MEM window: disabled
pci 0000:05:00.0:   PREFETCH window: disabled
pci 0000:00:1c.3: PCI bridge, secondary bus 0000:05
pci 0000:00:1c.3:   IO window: 0xa000-0xafff
pci 0000:00:1c.3:   MEM window: disabled
pci 0000:00:1c.3:   PREFETCH window: disabled
pci 0000:00:1c.4: PCI bridge, secondary bus 0000:07
pci 0000:00:1c.4:   IO window: disabled
pci 0000:00:1c.4:   MEM window: disabled
pci 0000:00:1c.4:   PREFETCH window: disabled
pci 0000:00:1c.5: PCI bridge, secondary bus 0000:08
pci 0000:00:1c.5:   IO window: 0xb000-0xbfff
pci 0000:00:1c.5:   MEM window: 0xfea00000-0xfeafffff
pci 0000:00:1c.5:   PREFETCH window: disabled
pci 0000:00:1e.0: PCI bridge, secondary bus 0000:09
pci 0000:00:1e.0:   IO window: disabled
pci 0000:00:1e.0:   MEM window: disabled
pci 0000:00:1e.0:   PREFETCH window: 0x000000d7f00000-0x000000dfefffff
pci 0000:00:01.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
pci 0000:00:01.0: setting latency timer to 64
pci 0000:00:1c.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
pci 0000:00:1c.0: setting latency timer to 64
pci 0000:00:1c.1: PCI INT B -> GSI 16 (level, low) -> IRQ 16
pci 0000:00:1c.1: setting latency timer to 64
pci 0000:00:1c.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
pci 0000:00:1c.2: setting latency timer to 64
pci 0000:00:1c.3: PCI INT D -> GSI 19 (level, low) -> IRQ 19
pci 0000:00:1c.3: setting latency timer to 64
pci 0000:05:00.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19
pci 0000:05:00.0: setting latency timer to 64
pci 0000:00:1c.4: PCI INT A -> GSI 17 (level, low) -> IRQ 17
pci 0000:00:1c.4: setting latency timer to 64
pci 0000:00:1c.5: PCI INT B -> GSI 16 (level, low) -> IRQ 16
pci 0000:00:1c.5: setting latency timer to 64
pci 0000:00:1e.0: setting latency timer to 64
bus: 00 index 0 io port: [0x00-0xffff]
bus: 00 index 1 mmio: [0x000000-0xffffffff]
bus: 01 index 0 io port: [0x9000-0x9fff]
bus: 01 index 1 mmio: [0xf8900000-0xfe9fffff]
bus: 01 index 2 mmio: [0xb7f00000-0xd7efffff]
bus: 01 index 3 mmio: [0x0-0x0]
bus: 02 index 0 mmio: [0x0-0x0]
bus: 02 index 1 mmio: [0x0-0x0]
bus: 02 index 2 mmio: [0x0-0x0]
bus: 02 index 3 mmio: [0x0-0x0]
bus: 03 index 0 mmio: [0x0-0x0]
bus: 03 index 1 mmio: [0x0-0x0]
bus: 03 index 2 mmio: [0x0-0x0]
bus: 03 index 3 mmio: [0x0-0x0]
bus: 04 index 0 mmio: [0x0-0x0]
bus: 04 index 1 mmio: [0x0-0x0]
bus: 04 index 2 mmio: [0x0-0x0]
bus: 04 index 3 mmio: [0x0-0x0]
bus: 05 index 0 io port: [0xa000-0xafff]
bus: 05 index 1 mmio: [0x0-0x0]
bus: 05 index 2 mmio: [0x0-0x0]
bus: 05 index 3 mmio: [0x0-0x0]
bus: 06 index 0 io port: [0xa000-0xafff]
bus: 06 index 1 mmio: [0x0-0x0]
bus: 06 index 2 mmio: [0x0-0x0]
bus: 06 index 3 mmio: [0x0-0x0]
bus: 07 index 0 mmio: [0x0-0x0]
bus: 07 index 1 mmio: [0x0-0x0]
bus: 07 index 2 mmio: [0x0-0x0]
bus: 07 index 3 mmio: [0x0-0x0]
bus: 08 index 0 io port: [0xb000-0xbfff]
bus: 08 index 1 mmio: [0xfea00000-0xfeafffff]
bus: 08 index 2 mmio: [0x0-0x0]
bus: 08 index 3 mmio: [0x0-0x0]
bus: 09 index 0 mmio: [0x0-0x0]
bus: 09 index 1 mmio: [0x0-0x0]
bus: 09 index 2 mmio: [0xd7f00000-0xdfefffff]
bus: 09 index 3 io port: [0x00-0xffff]
bus: 09 index 4 mmio: [0x000000-0xffffffff]
NET: Registered protocol family 2
IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
TCP: Hash tables configured (established 131072 bind 65536)
TCP reno registered
NET: Registered protocol family 1
Unpacking initramfs... done
Freeing initrd memory: 1649k freed
apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16ac)
apm: disabled - APM is not SMP safe.
highmem bounce pool size: 64 pages
VFS: Disk quotas dquot_6.5.1
Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
msgmni has been set to 1732
alg: No test for stdrng (krng)
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 254)
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered
io scheduler cfq registered (default)
pci 0000:01:00.0: Boot video device
pcieport-driver 0000:00:01.0: setting latency timer to 64
pcieport-driver 0000:00:01.0: found MSI capability
pcieport-driver 0000:00:01.0: irq 767 for MSI/MSI-X
pci_express 0000:00:01.0:pcie00: allocate port service
pci_express 0000:00:01.0:pcie03: allocate port service
pcieport-driver 0000:00:1c.0: setting latency timer to 64
pcieport-driver 0000:00:1c.0: found MSI capability
pcieport-driver 0000:00:1c.0: irq 766 for MSI/MSI-X
pci_express 0000:00:1c.0:pcie00: allocate port service
pci_express 0000:00:1c.0:pcie02: allocate port service
pci_express 0000:00:1c.0:pcie03: allocate port service
pcieport-driver 0000:00:1c.1: setting latency timer to 64
pcieport-driver 0000:00:1c.1: found MSI capability
pcieport-driver 0000:00:1c.1: irq 765 for MSI/MSI-X
pci_express 0000:00:1c.1:pcie00: allocate port service
pci_express 0000:00:1c.1:pcie02: allocate port service
pci_express 0000:00:1c.1:pcie03: allocate port service
pcieport-driver 0000:00:1c.2: setting latency timer to 64
pcieport-driver 0000:00:1c.2: found MSI capability
pcieport-driver 0000:00:1c.2: irq 764 for MSI/MSI-X
pci_express 0000:00:1c.2:pcie00: allocate port service
pci_express 0000:00:1c.2:pcie02: allocate port service
pci_express 0000:00:1c.2:pcie03: allocate port service
pcieport-driver 0000:00:1c.3: setting latency timer to 64
pcieport-driver 0000:00:1c.3: found MSI capability
pcieport-driver 0000:00:1c.3: irq 763 for MSI/MSI-X
pci_express 0000:00:1c.3:pcie00: allocate port service
pci_express 0000:00:1c.3:pcie02: allocate port service
pci_express 0000:00:1c.3:pcie03: allocate port service
pcieport-driver 0000:00:1c.4: setting latency timer to 64
pcieport-driver 0000:00:1c.4: found MSI capability
pcieport-driver 0000:00:1c.4: irq 762 for MSI/MSI-X
pci_express 0000:00:1c.4:pcie00: allocate port service
pci_express 0000:00:1c.4:pcie02: allocate port service
pci_express 0000:00:1c.4:pcie03: allocate port service
pcieport-driver 0000:00:1c.5: setting latency timer to 64
pcieport-driver 0000:00:1c.5: found MSI capability
pcieport-driver 0000:00:1c.5: irq 761 for MSI/MSI-X
pci_express 0000:00:1c.5:pcie00: allocate port service
pci_express 0000:00:1c.5:pcie02: allocate port service
pci_express 0000:00:1c.5:pcie03: allocate port service
vesafb: framebuffer at 0xfb000000, mapped to 0xf8080000, using 1875k, total 14336k
vesafb: mode is 800x600x16, linelength=1600, pages=2
vesafb: protected mode interface info at c000:c740
vesafb: pmi: set display start = c00cc7a3, set palette = c00cc7fe
vesafb: pmi: ports = 3b4 3b5 3ba 3c0 3c1 3c4 3c5 3c6 3c7 3c8 3c9 3cc 3ce 3cf 3d0 3d1 3d2 3d3 3d4 3d5 3da
vesafb: scrolling: redraw
vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0
Console: switching to colour frame buffer device 100x37
fbcondecor: console 0 using theme 'linhes'
fbcondecor: switched decor state to 'on' on console 0
fb0: VESA VGA frame buffer device
isapnp: Scanning for PnP cards...
Switched to high resolution mode on CPU 1
Switched to high resolution mode on CPU 0
isapnp: No Plug & Play device found
Serial: 8250/16550 driver4 ports, IRQ sharing disabled
input: Macintosh mouse button emulation as /class/input/input0
PNP: No PS/2 controller found. Probing ports directly.
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mice: PS/2 mouse device common for all mice
cpuidle: using governor ladder
cpuidle: using governor menu
TCP cubic registered
NET: Registered protocol family 17
Using IPI No-Shortcut mode
registered taskstats version 1
Freeing unused kernel memory: 324k freed
SCSI subsystem initialized
libata version 3.00 loaded.
ata_piix 0000:00:1f.2: version 2.12
ata_piix 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19
ata_piix 0000:00:1f.2: MAP [ P0 -- P1 -- ]
ata_piix 0000:00:1f.2: setting latency timer to 64
scsi0 : ata_piix
scsi1 : ata_piix
ata1: SATA max UDMA/133 cmd 0xec00 ctl 0xe880 bmdma 0xe400 irq 19
ata2: SATA max UDMA/133 cmd 0xe800 ctl 0xe480 bmdma 0xe408 irq 19
ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata1.00: ATA-8: ST31000340AS, SD1A, max UDMA/133
ata1.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 0/32)
ata1.00: configured for UDMA/133
ata2: SATA link down (SStatus 0 SControl 300)
scsi 0:0:0:0: Direct-Access     ATA      ST31000340AS     SD1A PQ: 0 ANSI: 5
ata_piix 0000:00:1f.5: PCI INT B -> GSI 19 (level, low) -> IRQ 19
ata_piix 0000:00:1f.5: MAP [ P0 -- P1 -- ]
ata_piix 0000:00:1f.5: setting latency timer to 64
scsi2 : ata_piix
scsi3 : ata_piix
ata3: SATA max UDMA/133 cmd 0xd000 ctl 0xcc00 bmdma 0xc480 irq 19
ata4: SATA max UDMA/133 cmd 0xc880 ctl 0xc800 bmdma 0xc488 irq 19
ata3: SATA link down (SStatus 0 SControl 300)
ata4: SATA link down (SStatus 0 SControl 300)
Driver 'sd' needs updating - please use bus_type methods
sd 0:0:0:0: [sda] 1953525168 512-byte hardware sectors: (1.00 TB/931 GiB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sd 0:0:0:0: [sda] 1953525168 512-byte hardware sectors: (1.00 TB/931 GiB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
 sda: sda1 sda2 sda3
sd 0:0:0:0: [sda] Attached SCSI disk
EXT3-fs: mounted filesystem with ordered data mode.
kjournald starting.  Commit interval 5 seconds
rtc_cmos 00:03: RTC can wake from S4
rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
rtc0: alarms up to one month, y3k, 114 bytes nvram
Linux video capture interface: v2.00
cx88/2: cx2388x MPEG-TS Driver Manager version 0.0.6 loaded
cx88/2: cx2388x dvb driver version 0.0.6 loaded
cx88/2: registering cx8802 driver, type: dvb access: shared
lirc_dev: IR Remote Control driver registered, major 61
bttv: driver version 0.9.17 loaded
bttv: using 8 buffers with 2080k (520 pages) each for capture
ivtv:  Start initialization, version 1.4.0
ivtv0: Initializing card #0
ivtv0: Autodetected Hauppauge card (cx23416 based)
ivtv 0000:09:01.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
tveeprom 0-0050: Hauppauge model 32032, rev B110, serial# 6942304
tveeprom 0-0050: tuner model is Philips FI1236 MK2 (idx 10, type 2)
tveeprom 0-0050: TV standards NTSC(M) (eeprom 0x08)
tveeprom 0-0050: audio processor is MSP4448 (idx 27)
tveeprom 0-0050: decoder processor is SAA7115 (idx 19)
tveeprom 0-0050: has no radio, has IR receiver, has no IR transmitter
ivtv0: Autodetected Hauppauge WinTV PVR-250
saa7115 0-0021: saa7115 found (1f7115d0e100000) @ 0x42 (ivtv i2c driver #0)
msp3400 0-0040: MSP4448G-A2 found @ 0x80 (ivtv i2c driver #0)
msp3400 0-0040: msp3400 supports radio, mode is autodetect and autoselect
tuner 0-0061: chip found @ 0xc2 (ivtv i2c driver #0)
tuner-simple 0-0061: creating new instance
tuner-simple 0-0061: type set to 2 (Philips NTSC (FI1236,FM1236 and compatibles))
ivtv0: Registered device video0 for encoder MPG (4096 kB)
ivtv0: Registered device video32 for encoder YUV (2048 kB)
ivtv0: Registered device vbi0 for encoder VBI (1024 kB)
ivtv0: Registered device video24 for encoder PCM (320 kB)
ivtv0: Initialized card #0: Hauppauge WinTV PVR-250
ivtv:  End initialization
cx88/0: cx2388x v4l2 driver version 0.0.6 loaded
lirc_i2c: chip 0x10020 found @ 0x18 (Hauppauge IR)
lirc_dev: lirc_register_plugin: sample_rate: 10
input: Power Button (FF) as /class/input/input1
ACPI: Power Button (FF) [PWRF]
input: Power Button (CM) as /class/input/input2
ACPI: Power Button (CM) [PWRB]
processor ACPI_CPU:00: registered as cooling_device0
processor ACPI_CPU:01: registered as cooling_device1
thermal LNXTHERM:01: registered as thermal_zone0
ACPI: Thermal Zone [THRM] (30 C)
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
Linux agpgart interface v0.103
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci_hcd 0000:00:1a.7: PCI INT C -> GSI 18 (level, low) -> IRQ 18
ehci_hcd 0000:00:1a.7: setting latency timer to 64
ehci_hcd 0000:00:1a.7: EHCI Host Controller
ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1
ehci_hcd 0000:00:1a.7: debug port 1
ehci_hcd 0000:00:1a.7: cache line size of 32 is not supported
ehci_hcd 0000:00:1a.7: irq 18, io mem 0xfebffc00
ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 4 ports detected
ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23
ehci_hcd 0000:00:1d.7: setting latency timer to 64
ehci_hcd 0000:00:1d.7: EHCI Host Controller
ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2
ehci_hcd 0000:00:1d.7: debug port 1
ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported
ehci_hcd 0000:00:1d.7: irq 23, io mem 0xfebff800
ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
usb usb2: configuration #1 chosen from 1 choice
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 8 ports detected
nvidia: module license 'NVIDIA' taints kernel.
uhci_hcd: USB Universal Host Controller Interface driver
uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
uhci_hcd 0000:00:1a.0: setting latency timer to 64
uhci_hcd 0000:00:1a.0: UHCI Host Controller
uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3
uhci_hcd 0000:00:1a.0: irq 16, io base 0x0000e000
usb usb3: configuration #1 chosen from 1 choice
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21
uhci_hcd 0000:00:1a.1: setting latency timer to 64
uhci_hcd 0000:00:1a.1: UHCI Host Controller
uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4
uhci_hcd 0000:00:1a.1: irq 21, io base 0x0000dc00
usb usb4: configuration #1 chosen from 1 choice
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
uhci_hcd 0000:00:1d.0: setting latency timer to 64
uhci_hcd 0000:00:1d.0: UHCI Host Controller
uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 5
uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000d880
usb usb5: configuration #1 chosen from 1 choice
hub 5-0:1.0: USB hub found
hub 5-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
uhci_hcd 0000:00:1d.1: setting latency timer to 64
uhci_hcd 0000:00:1d.1: UHCI Host Controller
uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 6
uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000d800
usb usb6: configuration #1 chosen from 1 choice
hub 6-0:1.0: USB hub found
hub 6-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
uhci_hcd 0000:00:1d.2: setting latency timer to 64
uhci_hcd 0000:00:1d.2: UHCI Host Controller
uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 7
uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000d480
usb usb7: configuration #1 chosen from 1 choice
hub 7-0:1.0: USB hub found
hub 7-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.3: PCI INT D -> GSI 16 (level, low) -> IRQ 16
uhci_hcd 0000:00:1d.3: setting latency timer to 64
uhci_hcd 0000:00:1d.3: UHCI Host Controller
uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 8
uhci_hcd 0000:00:1d.3: irq 16, io base 0x0000d400
usb usb8: configuration #1 chosen from 1 choice
hub 8-0:1.0: USB hub found
hub 8-0:1.0: 2 ports detected
usb 3-2: new full speed USB device using uhci_hcd and address 2
r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
r8169 0000:08:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
r8169 0000:08:00.0: setting latency timer to 64
r8169 0000:08:00.0: irq 760 for MSI/MSI-X
eth0: RTL8168b/8111b at 0xf8352000, 00:19:21:38:42:ea, XID 38000000 IRQ 760
sd 0:0:0:0: Attached scsi generic sg0 type 0
usb 3-2: configuration #1 chosen from 1 choice
hub 3-2:1.0: USB hub found
hub 3-2:1.0: 2 ports detected
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
i801_smbus 0000:00:1f.3: PCI INT C -> GSI 18 (level, low) -> IRQ 18
iTCO_vendor_support: vendor-support=0
input: PC Speaker as /class/input/input3
iTCO_wdt: Intel TCO WatchDog Timer Driver v1.04
iTCO_wdt: Found a ICH9 TCO device (Version=2, TCOBASE=0x0860)
iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
nvidia 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
nvidia 0000:01:00.0: setting latency timer to 64
NVRM: loading NVIDIA UNIX x86 Kernel Module  185.18.14  Wed May 27 02:23:13 PDT 2009
usb 4-2: new full speed USB device using uhci_hcd and address 2
AV200 0000:06:04.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19
usb 4-2: configuration #1 chosen from 1 choice
usb 8-1: new full speed USB device using uhci_hcd and address 2
usb 8-1: configuration #1 chosen from 1 choice
usb 3-2.1: new full speed USB device using uhci_hcd and address 3
Bluetooth: Core ver 2.13
NET: Registered protocol family 31
Bluetooth: HCI device and connection manager initialized
Bluetooth: HCI socket layer initialized
Bluetooth: HCI USB driver ver 2.10
usbcore: registered new interface driver hci_usb
usb 3-2.1: configuration #1 chosen from 1 choice
usbcore: registered new interface driver hiddev
usb 3-2.2: new low speed USB device using uhci_hcd and address 4
input: BTC Multimedia USB Keyboard as /class/input/input4
generic-usb 0003:046E:530A.0001: input,hidraw0: USB HID v1.10 Keyboard [BTC Multimedia USB Keyboard] on usb-0000:00:1a.0-2.1/input0
usbcore: registered new interface driver usbhid
usbhid: v2.6:USB HID core driver
usb 3-2.2: configuration #1 chosen from 1 choice
input: Microsoft Microsoft Notebook/Mobile Optical Mouse 2.0 as /class/input/input5
generic-usb 0003:045E:007D.0002: input,hidraw1: USB HID v1.10 Mouse [Microsoft Microsoft Notebook/Mobile Optical Mouse 2.0] on usb-0000:00:1a.0-2.2/input0
EXT3 FS on sda1, internal journal
kjournald starting.  Commit interval 5 seconds
EXT3 FS on sda3, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
Adding 1959920k swap on /dev/sda2.  Priority:-1 extents:1 across:1959920k
cx88/2: cx2388x dvb driver version 0.0.6 loaded
cx88/2: registering cx8802 driver, type: dvb access: shared
r8169: eth0: link up
r8169: eth0: link up
RPC: Registered udp transport module.
RPC: Registered tcp transport module.
Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
NFSD: Using /var/lib/nfs/v4recovery as the NFSv4 state recovery directory
NFSD: starting 90-second grace period
NET: Registered protocol family 10
lo: Disabled Privacy Extensions
fuppes[4128]: segfault at 0 ip b7f91d41 sp bfca3810 error 4 in libfuppes.so.0.0.0[b7f6a000+107000]
ivtv 0000:09:01.0: firmware: requesting v4l-cx2341x-enc.fw
fuppes[4688]: segfault at 0 ip b7ed3d41 sp bfee6550 error 4 in libfuppes.so.0.0.0[b7eac000+107000]
ivtv0: Loaded v4l-cx2341x-enc.fw firmware (376836 bytes)
ivtv0: Encoder revision: 0x02060039
fuppes[4716]: segfault at 0 ip b7fddd41 sp bfef1a60 error 4 in libfuppes.so.0.0.0[b7fb6000+107000]
fuppes[4736]: segfault at 0 ip b7ecfd41 sp bfbe3750 error 4 in libfuppes.so.0.0.0[b7ea8000+107000]
fuppes[4781]: segfault at 0 ip b7e5dd41 sp bfe711e0 error 4 in libfuppes.so.0.0.0[b7e36000+107000]
fuppes[4796]: segfault at 0 ip b7f3bd41 sp bf84f3c0 error 4 in libfuppes.so.0.0.0[b7f14000+107000]
fuppes[4797]: segfault at 0 ip b7f08d41 sp bf81a390 error 4 in libfuppes.so.0.0.0[b7ee1000+107000]
fuppes[4800]: segfault at 0 ip b7ee6d41 sp bfaf7e70 error 4 in libfuppes.so.0.0.0[b7ebf000+107000]
eth0: no IPv6 routers present
fuppes[4801]: segfault at 0 ip b7dffd41 sp bfd11080 error 4 in libfuppes.so.0.0.0[b7dd8000+107000]
fuppes[4802]: segfault at 0 ip b7f61d41 sp bf8733e0 error 4 in libfuppes.so.0.0.0[b7f3a000+107000]
fuppes[4806]: segfault at 0 ip b7fbfd41 sp bfbd0f40 error 4 in libfuppes.so.0.0.0[b7f98000+107000]
fuppes[4811]: segfault at 0 ip b7e7ad41 sp bfb8df00 error 4 in libfuppes.so.0.0.0[b7e53000+107000]


aplay -l & -L
Code:
[root@SnowTV ~]# aplay -l
**** List of PLAYBACK Hardware Devices ****
card 0: DX [Xonar DX], device 0: Multichannel [Multichannel]
  Subdevices: 1/1
  Subdevice #0: subdevice #0
card 0: DX [Xonar DX], device 1: Digital [Digital]
  Subdevices: 1/1
  Subdevice #0: subdevice #0
[root@SnowTV ~]# aplay -L
default:CARD=DX
    Xonar DX, Multichannel
    Default Audio Device
front:CARD=DX,DEV=0
    Xonar DX, Multichannel
    Front speakers
surround40:CARD=DX,DEV=0
    Xonar DX, Multichannel
    4.0 Surround output to Front and Rear speakers
surround41:CARD=DX,DEV=0
    Xonar DX, Multichannel
    4.1 Surround output to Front, Rear and Subwoofer speakers
surround50:CARD=DX,DEV=0
    Xonar DX, Multichannel
    5.0 Surround output to Front, Center and Rear speakers
surround51:CARD=DX,DEV=0
    Xonar DX, Multichannel
    5.1 Surround output to Front, Center, Rear and Subwoofer speakers
surround71:CARD=DX,DEV=0
    Xonar DX, Multichannel
    7.1 Surround output to Front, Center, Side, Rear and Woofer speakers
iec958:CARD=DX,DEV=0
    Xonar DX, Multichannel
    IEC958 (S/PDIF) Digital Audio Output
null
    Discard all samples (playback) or generate zero samples (capture)
[root@SnowTV ~]#


lsmod
Code:
[root@SnowTV ~]# lsmod
Module                  Size  Used by
ipv6                  260212  16
nfsd                  221228  6
lockd                  66604  1 nfsd
nfs_acl                 4864  1 nfsd
auth_rpcgss            34976  1 nfsd
sunrpc                174560  11 nfsd,lockd,nfs_acl,auth_rpcgss
exportfs                6016  1 nfsd
usbhid                 36896  0
hid                    40704  1 usbhid
hci_usb                15384  0
bluetooth              54372  1 hci_usb
snd_seq_oss            31872  0
snd_seq_midi_event      8192  1 snd_seq_oss
snd_seq                49968  4 snd_seq_oss,snd_seq_midi_event
snd_pcm_oss            40320  0
snd_mixer_oss          16512  1 snd_pcm_oss
snd_virtuoso           12676  0
snd_oxygen_lib         30848  1 snd_virtuoso
snd_pcm                70020  2 snd_pcm_oss,snd_oxygen_lib
snd_timer              21384  2 snd_seq,snd_pcm
snd_page_alloc         10120  1 snd_pcm
snd_mpu401_uart         8704  1 snd_oxygen_lib
snd_rawmidi            21504  1 snd_mpu401_uart
snd_seq_device          8332  3 snd_seq_oss,snd_seq,snd_rawmidi
snd                    50852  11 snd_seq_oss,snd_seq,snd_pcm_oss,snd_mixer_oss,snd_virtuoso,snd_oxygen_lib,snd_pcm,snd_timer,snd_mpu401_uart,snd_rawmidi,snd_seq_device
soundcore               8160  1 snd
iTCO_wdt               12836  0
pcspkr                  4352  0
iTCO_vendor_support     4996  1 iTCO_wdt
i2c_i801               10896  0
psmouse                55828  0
shpchp                 34068  0
pci_hotplug            28064  1 shpchp
serio_raw               7172  0
sg                     26804  0
r8169                  33924  0
mii                     6528  1 r8169
uhci_hcd               24592  0
nvidia               9545444  36
intel_agp              27836  0
ehci_hcd               36876  0
agpgart                31572  2 nvidia,intel_agp
usbcore               136976  5 usbhid,hci_usb,uhci_hcd,ehci_hcd
evdev                  11296  4
thermal                17180  0
processor              41388  1 thermal
fan                     6276  0
button                  7824  0
battery                12036  0
ac                      6020  0
cx8800                 31236  0
msp3400                32332  0
saa7115                18224  0
tuner                  26692  0
tea5767                 8580  1 tuner
tda8290                14468  1 tuner
tda18271               36232  1 tda8290
tda827x                11652  1 tda8290
mt20xx                 14088  1 tuner
tea5761                 6660  1 tuner
ivtv                  142788  0
cx2341x                14340  1 ivtv
bttv                  165460  0
compat_ioctl32          3072  3 cx8800,ivtv,bttv
v4l2_common            13184  7 cx8800,msp3400,saa7115,tuner,ivtv,cx2341x,bttv
lirc_i2c               10756  1
lirc_dev               13492  1 lirc_i2c
cx88_vp3054_i2c         4352  0
mt352                   8196  0
cx8802                 16900  0
cx88xx                 69800  2 cx8800,cx8802
videodev               34176  6 cx8800,msp3400,tuner,ivtv,bttv,cx88xx
v4l1_compat            15364  1 videodev
ir_common              40452  2 bttv,cx88xx
i2c_algo_bit            7556  4 ivtv,bttv,cx88_vp3054_i2c,cx88xx
tveeprom               13956  3 ivtv,bttv,cx88xx
btcx_risc               6408  4 cx8800,bttv,cx8802,cx88xx
tuner_xc2028           23600  1 tuner
s5h1409                10500  0
xc5000                 13192  1 tuner
dvb_pll                10632  0
s5h1411                11396  0
or51132                 9988  0
cx24116                16904  0
videobuf_dvb            8324  2 cx8802,cx88xx
videobuf_dma_sg        12932  4 cx8800,bttv,cx8802,cx88xx
videobuf_core          17668  6 cx8800,bttv,cx8802,cx88xx,videobuf_dvb,videobuf_dma_sg
nxt200x                14980  0
isl6421                 3840  0
stb6000                 5380  0
tda9887                12164  1 tuner
tuner_simple           16144  1 tuner
tuner_types            16000  1 tuner_simple
zl10353                 9352  0
cx24123                15368  0
lgdt330x               10244  0
stv0299                11656  0
dvb_core               81024  4 or51132,videobuf_dvb,lgdt330x,stv0299
stv0288                 9352  0
cx22702                 7556  0
i2c_core               22804  38 i2c_i801,nvidia,msp3400,saa7115,tuner,tea5767,tda8290,tda18271,tda827x,mt20xx,tea5761,ivtv,bttv,v4l2_common,lirc_i2c,cx88_vp3054_i2c,mt352,cx88xx,i2c_algo_bit,tveeprom,tuner_xc2028,s5h1409,xc5000,dvb_pll,s5h1411,or51132,cx24116,nxt200x,isl6421,stb6000,tda9887,tuner_simple,zl10353,cx24123,lgdt330x,stv0299,stv0288,cx22702
rtc_cmos               12332  0
rtc_core               17564  1 rtc_cmos
rtc_lib                 4480  1 rtc_core
ext3                  126984  2
jbd                    46996  1 ext3
mbcache                 8708  1 ext3
sd_mod                 26904  4
pata_acpi               6016  0
ata_piix               23300  3
libata                158240  2 pata_acpi,ata_piix
scsi_mod              102036  3 sg,sd_mod,libata
[root@SnowTV ~]#


lspci
Code:
[root@SnowTV ~]# lspci
00:00.0 Host bridge: Intel Corporation 82G33/G31/P35/P31 Express DRAM Controller (rev 02)
00:01.0 PCI bridge: Intel Corporation 82G33/G31/P35/P31 Express PCI Express Root Port (rev 02)
00:1a.0 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #4 (rev 02)
00:1a.1 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #5 (rev 02)
00:1a.7 USB Controller: Intel Corporation 82801I (ICH9 Family) USB2 EHCI Controller #2 (rev 02)
00:1c.0 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express Port 1 (rev 02)
00:1c.1 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express Port 2 (rev 02)
00:1c.2 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express Port 3 (rev 02)
00:1c.3 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express Port 4 (rev 02)
00:1c.4 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express Port 5 (rev 02)
00:1c.5 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express Port 6 (rev 02)
00:1d.0 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #1 (rev 02)
00:1d.1 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #2 (rev 02)
00:1d.2 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #3 (rev 02)
00:1d.3 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #6 (rev 02)
00:1d.7 USB Controller: Intel Corporation 82801I (ICH9 Family) USB2 EHCI Controller #1 (rev 02)
00:1e.0 PCI bridge: Intel Corporation 82801 PCI Bridge (rev 92)
00:1f.0 ISA bridge: Intel Corporation 82801IB (ICH9) LPC Interface Controller (rev 02)
00:1f.2 IDE interface: Intel Corporation 82801IB (ICH9) 2 port SATA IDE Controller (rev 02)
00:1f.3 SMBus: Intel Corporation 82801I (ICH9 Family) SMBus Controller (rev 02)
00:1f.5 IDE interface: Intel Corporation 82801I (ICH9 Family) 2 port SATA IDE Controller (rev 02)
01:00.0 VGA compatible controller: nVidia Corporation GeForce 8400 GS (rev a1)
05:00.0 PCI bridge: PLX Technology, Inc. PEX8112 x1 Lane PCI Express-to-PCI Bridge (rev aa)
06:04.0 Multimedia audio controller: C-Media Electronics Inc CMI8788 [Oxygen HD Audio]
08:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller (rev 01)
09:01.0 Multimedia video controller: Internext Compression Inc iTVC16 (CX23416) MPEG-2 Encoder (rev 01)
[root@SnowTV ~]#


lsusb
Code:
[root@SnowTV ~]# lsusb
Bus 008 Device 002: ID 0a12:0001 Cambridge Silicon Radio, Ltd Bluetooth Dongle (HCI mode)
Bus 008 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 007 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 006 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 004 Device 002: ID 046d:0870 Logitech, Inc. QuickCam Express
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 003 Device 004: ID 045e:007d Microsoft Corp. Notebook Optical Mouse
Bus 003 Device 003: ID 046e:530a Behavior Tech. Computer Corp.
Bus 003 Device 002: ID 046e:5400 Behavior Tech. Computer Corp.
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
[root@SnowTV ~]#

_________________
* v2. NZXT Duet / ECS G33T-M2 / Intel C2D E5200 / 2GB RAM / 1TB HD / Nvidia 7200GS / PVR-250 / SiliconDust HDHomeRun
* v1. Shuttle SK41G - AMD 1.4GHz / 768MB RAM / 300GB HD / PVR-250 / Nvidia 5200
* Samsung LN52A650


Top
 Profile  
 
 Post subject:
PostPosted: Fri Jun 19, 2009 10:13 pm 
Offline
Joined: Sun May 29, 2005 5:47 pm
Posts: 65
Hi mcdrama,

Sorry you are having trouble. Can't offer any help here as I have the same problem. What i couldn't figure out is how to compile the new ALSA drivers on ARCH linux. I don't think it is as simple as loading the alsa-lib and alsa-util from another repository. After loading these packages, I still get:

[root@KnoppmythB]# cat /proc/asound/version
Advanced Linux Sound Architecture Driver Version 1.0.18rc3.

I did not see that 1.0.20 was installed. So my guess that the new driver is not loaded. See the instruction for R5E27.

http://mysettopbox.tv/phpBB2/viewtopic.php?t=16840&start=0&postdays=0&postorder=asc&highlight=


Top
 Profile  
 
 Post subject:
PostPosted: Fri Jun 19, 2009 11:58 pm 
Offline
Joined: Sat Jan 31, 2004 12:50 pm
Posts: 84
Location: Santa Cruz Mountains, CA
mark60050 wrote:
Hi mcdrama,

Sorry you are having trouble. Can't offer any help here as I have the same problem.


Do you get audio out to head/ear phones?

_________________
* v2. NZXT Duet / ECS G33T-M2 / Intel C2D E5200 / 2GB RAM / 1TB HD / Nvidia 7200GS / PVR-250 / SiliconDust HDHomeRun
* v1. Shuttle SK41G - AMD 1.4GHz / 768MB RAM / 300GB HD / PVR-250 / Nvidia 5200
* Samsung LN52A650


Top
 Profile  
 
 Post subject:
PostPosted: Sat Jun 20, 2009 12:02 am 
Offline
Joined: Sun Sep 25, 2005 3:50 pm
Posts: 1013
Location: Los Angeles
mcdrama see here for a shove in the right direction. :wink:

_________________
Mike
My Hardware Profile


Top
 Profile  
 
 Post subject:
PostPosted: Sat Jun 20, 2009 7:28 am 
Offline
Joined: Sun May 29, 2005 5:47 pm
Posts: 65
mark60050 wrote:
Hi mcdrama,

Sorry you are having trouble. Can't offer any help here as I have the same problem. What i couldn't figure out is how to compile the new ALSA drivers on ARCH linux. I don't think it is as simple as loading the alsa-lib and alsa-util from another repository. After loading these packages, I still get:

[root@KnoppmythB]# cat /proc/asound/version
Advanced Linux Sound Architecture Driver Version 1.0.18rc3.

I did not see that 1.0.20 was installed. So my guess that the new driver is not loaded. See the instruction for R5E27.

http://mysettopbox.tv/phpBB2/viewtopic.php?t=16840&start=0&postdays=0&postorder=asc&highlight=


Actually, I am getting audio out of my 3.5 mm jack. I misread your post late last night and thought you were trying to get the audio working through the HDMI connector. That is what I am ultimately trying to do. To do that, I need to update my alsa drivers as you do. I couldn't figure out how to do it for R6. Mike's pointers look like they should do the trick. If successfully build the packages, I will let you know.

-Mark


Top
 Profile  
 
 Post subject:
PostPosted: Sat Jun 20, 2009 9:53 am 
Offline
Joined: Sat Jan 31, 2004 12:50 pm
Posts: 84
Location: Santa Cruz Mountains, CA
audio over hdmi is a pita from what i've looked at. I'm quite content for now with the RCA/Stereo setup if it would work!
It blows me away that I can get audio out of speakers and ear phones but not to my TV.

I may mail this to the alsa list because it is very, very, strange. ubuntu 9.04 is running the same version of alsa as R6, 1.0.18rc3.

archlinux has 1.0.20 packages but they likely wont work since they are compiled against a newer kernel.

_________________
* v2. NZXT Duet / ECS G33T-M2 / Intel C2D E5200 / 2GB RAM / 1TB HD / Nvidia 7200GS / PVR-250 / SiliconDust HDHomeRun
* v1. Shuttle SK41G - AMD 1.4GHz / 768MB RAM / 300GB HD / PVR-250 / Nvidia 5200
* Samsung LN52A650


Top
 Profile  
 
 Post subject: Audio over hdmi
PostPosted: Sat Jun 27, 2009 3:56 pm 
Offline
Joined: Wed Jun 10, 2009 8:39 pm
Posts: 118
mcdrama wrote:
audio over hdmi is a pita from what i've looked at. I'm quite content for now with the RCA/Stereo setup if it would work!
It blows me away that I can get audio out of speakers and ear phones but not to my TV.

I may mail this to the alsa list because it is very, very, strange. ubuntu 9.04 is running the same version of alsa as R6, 1.0.18rc3.

archlinux has 1.0.20 packages but they likely wont work since they are compiled against a newer kernel.


I have audio over hdmi in R6. I could not get it to work using alsa. You need to configure the frontend. Service menu/Linhes configuration/Audio settings. Choose load oss driver. Then test each of your dev's until you find which one works. Mine was dsp7.

_________________
* Asus M3N78-EM, AMD 5050e, Nvidia 8300 IGP, QNAP TS-439 Pro II, Linhes 7.4


Top
 Profile  
 
 Post subject:
PostPosted: Sat Jun 27, 2009 7:11 pm 
Offline
Joined: Sun May 29, 2005 5:47 pm
Posts: 65
I did get HDMI working on a R6 fresh install with ALSA 1.0.18rc3 yesterday. The current R6 beta ships with ALSA 1.0.18rc3. To determine which version you have installed, executed the following:

Code:
$ cat /proc/asound/version
Advanced Linux Sound Architecture Driver Version 1.0.18rc3.



Here is a rough outline of what I did.

I set the audio menu in LinHES service menu to tinker. I am a little spooked by audio settings MythVantage/LinHES construct as I not sure what they do. They're are a number of ways to configure the audio in ALSA and it was more work to reverse engineer the configuration. Also, there is mythtv configuration for audio and I'm not sure how these two play together.Instead, I tried to go with the simplest configuration possible.

I first figured out where my output devices are mapped on my ASUS P5N7A-VM by the following:

Code:
$ cat /proc/asound/cards
the list of registered cards
 0 [NVidia         ]: HDA-Intel - HDA NVidia
                      HDA NVidia at 0xf9e78000 irq 22
$ cat /proc/asound/pcm
the list of allocated pcm streams
00-00: ALC1200 Analog : ALC1200 Analog : playback 1 : capture 1
00-01: ALC1200 Digital : ALC1200 Digital : playback 1
00-02: ALC1200 Analog : ALC1200 Analog : capture 1
00-03: NVIDIA HDMI : NVIDIA HDMI : playback 1


This shows I have one sound card and 3 playback pcm devices (0,1,3) and 2 capture pcm devices (0,2). To test the HDMI output, I would use card 0, device 3. I also need to turn the digital audio output on using alsamixer. You can tell you turned on a optical SPDIF because the light turns on. You need to do the same step for HDMI. For my board, I found this was "IEC958_1", but you can turn anything with IEC958 in its name. It does not seem to hurt to have multiple digital out put devices enabled. Once you enabled the digital output, you can test it with mplayer:

Code:
mplayer -ao alsa:device=hw=0.3  /usr/share/sounds/restored.wav


You can substitute your favorite mp3 file for a longer test. You should be able to hear the audio being played by your TV set. If that works, you've got the right card and device.

Having figured out the correct device, I next created a simple asound.conf file with one entry for default device.
Code:
sudo nano /etc/asound.conf
   pcm.!default {
       type hw
       card 0
       device 3
   }


I then configured mythtv to used the default ALSA device "ALSA:default" in the mythtv configuration (non LinHES) general menu.

I configured mplayer to use the ALSA default device by adding the following to the default system wide configuration file.

Code:
nano /etc/mplayer/mplayer.conf
##################
# audio settings #
##################
# Specify default audio driver (see -ao help for a list).
ao=alsa:device=hw=0.3

# Specify the audio codecs to use.  Chose AC3 passthrough then DTS then default
ac=hwac3,hwdts,



Your TV might not handle the AC3 pass through correctly. So you can comment out the line begining with "ac=" out to start. After this edit, mplayer should invoke the ALSA:default device as specified /etc/asound.conf.


Originally, I updated my drivers to ALSA 1.0.20 compiled from source before wiped my box and started from scratch. I have a script for downloading and compiling teh ALSA 1.0.20 which I can share if anyone would like it.


Last edited by mark60050 on Thu Jul 02, 2009 7:47 am, edited 1 time in total.


Top
 Profile  
 
 Post subject:
PostPosted: Sun Jun 28, 2009 12:33 am 
Offline
Joined: Sat Jan 31, 2004 12:50 pm
Posts: 84
Location: Santa Cruz Mountains, CA
so has anyone experienced a problem similar to mine? i'm not trying to get HDMI out working. I just don't understand why the *exact* same drivers, but ubuntu audio out works fine, but with R6 it only works for head phones or powered PC speakers.

_________________
* v2. NZXT Duet / ECS G33T-M2 / Intel C2D E5200 / 2GB RAM / 1TB HD / Nvidia 7200GS / PVR-250 / SiliconDust HDHomeRun
* v1. Shuttle SK41G - AMD 1.4GHz / 768MB RAM / 300GB HD / PVR-250 / Nvidia 5200
* Samsung LN52A650


Top
 Profile  
 
 Post subject:
PostPosted: Sun Jun 28, 2009 6:03 am 
Offline
Joined: Wed Jun 10, 2009 8:39 pm
Posts: 118
mark60050 wrote:
I did get HDMI working on a R6 fresh install with ALSA 1.0.18rc3 yesterday.


Thank-you very much for taking the trouble to put in such a helpful and detailed post. Having wasted so much time trying to get alsa to work over hdmi, I admire your achievement.

Do you happen to know if this also works with the xbmc in the repo? Whilst I could get R6 to work with oss, I had no luck with xbmc.

_________________
* Asus M3N78-EM, AMD 5050e, Nvidia 8300 IGP, QNAP TS-439 Pro II, Linhes 7.4


Top
 Profile  
 
 Post subject:
PostPosted: Sun Jun 28, 2009 12:01 pm 
Offline
Joined: Sat Jan 31, 2004 12:50 pm
Posts: 84
Location: Santa Cruz Mountains, CA
<rant>
guys, please, start another thread related to audio over hdmi. dirty threads on forums makes it difficult to find useful information. there are two completely different issues being discussed here.

Not trying to be a jerk, but I find this is a big problem on forums and it sucks when you're trying to seek help on an issue.
</rant>

_________________
* v2. NZXT Duet / ECS G33T-M2 / Intel C2D E5200 / 2GB RAM / 1TB HD / Nvidia 7200GS / PVR-250 / SiliconDust HDHomeRun
* v1. Shuttle SK41G - AMD 1.4GHz / 768MB RAM / 300GB HD / PVR-250 / Nvidia 5200
* Samsung LN52A650


Top
 Profile  
 

Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 11 posts ] 


All times are UTC - 6 hours




Who is online

Users browsing this forum: Google [Bot] and 23 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Jump to:  
cron
Powered by phpBB® Forum Software © phpBB Group

Theme Created By ceyhansuyu