| LinHES Forums http://forums.linhes.org/ |
|
| Hauppauge Grey Remote - PVR350 Issue http://forums.linhes.org/viewtopic.php?f=2&t=2226 |
Page 1 of 1 |
| Author: | foopex [ Sat Aug 21, 2004 4:57 pm ] |
| Post subject: | Hauppauge Grey Remote - PVR350 Issue |
Hello, I have an issue that I could not find an explanation for in this forum. I'm using R4V4.1. For some reason in one of my computers lirc is not recieving input from the remote through the built in pvr350 IR reciever. Everything else is working perfectly. I would like to mention that the IR reciever works fine in one machine (nforce2 chipset) but does not quite work in the intended machine (i815 chipset). I have tested this using the irw utility and on the i815 based machine it does not record any input. The lirc_i2c and lirc_dev modules are loaded with this output in kern.log: Code: kernel: lirc_dev: IR Remote Control driver registered, at major 61 kernel: bttv: driver version 0.9.15 loaded kernel: bttv: using 8 buffers with 2080k (520 pages) each for capture kernel: bttv: driver version 0.9.15 loaded kernel: bttv: using 8 buffers with 2080k (520 pages) each for capture kernel: i2c-core.o: driver i2c ir driver registered. kernel: lirc_i2c: chip found @ 0x18 (Hauppauge IR) kernel: i2c-core.o: client [Hauppauge IR] registered to adapter [ivtv i2c driver #0](pos. 3). kernel: lirc_dev: lirc_register_plugin:sample_rate: 10 From here, it looks like there are no problems... lircd runs fine, the lircd log shows no foul: Code: lircd 0.7.0pre4: lircd(hauppauge) ready this is in my modules.conf: Code: alias char-major-61 lirc_i2c and these are my devices in /dev Code: root@jed:/dev # ls -l li* crw-r--r-- 1 root root 61, 0 Oct 20 2003 lirc srw-rw-rw- 1 root root 0 Aug 22 04:28 lircd prw-r--r-- 1 root root 0 Apr 10 19:49 lircm here is my ivtv module config: Code: alias char-major-81 videodev alias char-major-61 lirc_i2c options ivtv debug=1 options tuner type=39 options msp3400 once=1 simple=1 add below ivtv msp3400 saa7115 tuner add above ivtv lirc_dev lirc_i2c and here are the related modules loaded: Code: lirc_i2c 4448 0 (unused)
lirc_dev 8592 1 [lirc_i2c] ivtv 85572 3 (autoclean) msp3400 16544 1 (autoclean) saa7115 5920 0 (autoclean) (unused) tuner 12712 1 (autoclean) i2c-algo-bit 7048 1 (autoclean) [ivtv] i2c-core 12452 0 (autoclean) [lirc_i2c ivtv msp3400 saa7115 tuner i2c-algo-bit] videodev 6016 4 (autoclean) [ivtv] I don't know what to think except it doens't like the mobo chipset. Can't think of any other info to provide. |
|
| Author: | foopex [ Tue Aug 24, 2004 7:32 am ] |
| Post subject: | |
Recompiling lirc didn't help either.. hmmm. |
|
| Author: | RaZ [ Tue Aug 31, 2004 5:03 am ] |
| Post subject: | |
I'm having the same exact problem with a VIA chipset. I have the new PVR 350 with the LG tuner. I'm wondering if other things changed on the card besides the tuner. The card is working great. My last two steps are lirc and lcdproc (Ahanix D5 case parallel port VFD). I'll post my solution if I figure it out. |
|
| Author: | RaZ [ Wed Sep 01, 2004 6:54 am ] |
| Post subject: | |
Not really helpful solution but it turned out for me that I didn't have the ir receiver plugged in all the way. Which was either my sloppiness or its not a good fit. Give yours a good push in to make sure its snug. |
|
| Author: | mrice [ Tue Sep 14, 2004 8:33 pm ] |
| Post subject: | pvr-350 remote control |
I am having the same problem. Everything works except no action from the remote control. My motherboard is DFI KM400-MLV with Via chipset. Anybody have an idea? |
|
| Author: | cesman [ Wed Sep 15, 2004 8:46 am ] |
| Post subject: | |
Someone else had this issue, turn out the receiver cable wasn't fully seated in the card. |
|
| Page 1 of 1 | All times are UTC - 6 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|